net_device_ctx is assigned in the very beginning of the function and 'net'
pointer doesn't change.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before commit 6d7b857d ("net: use lib/percpu_counter API for
fragmentation mem accounting"), setting the reassembly high threshold
to 0 prevented fragment reassembly as first fragment would be always
evicted before second could be added to the queue. While inefficient,
some users apparently relied on this method.

Since the commit mentioned above, a percpu counter is used for
reassembly memory accounting and high batch size avoids taking slow path
in most common scenarios. As a result, a whole full sized packet can be
reassembled without the percpu counter's main counter changing its value
so that even with high_thresh set to 0, fragmented packets can be still
reassembled and processed.

Add explicit check preventing reassembly if high threshold is zero.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kejian Yan says:

====================
net: hns: add support of ACPI

This series adds HNS support of acpi. The routine will call some ACPI
helper functions, like acpi_dev_found() and acpi_evaluate_dsm(), which
are not included in other cases. In order to make system compile
successfully in other cases except ACPI, it needs to add relative stub
functions to linux/acpi.h. And we use device property functions instead
of serial helper functions to suport both DT and ACPI cases. And then
add the supports of ACPI for HNS.

change log:
 v3->v4:
  mii-id gets from dev-name instead of address

 v2->v3:
 1. add Review-by: Andy Shevchenko
 2. fix the potential memory leak

 v1 -> v2:
 1. use acpi_dev_found() instead of acpi_match_device_ids() to check if
it is a acpi node.
 2. use is_of_node() instead of IS_ENABLED() to check if it is a DT node.
 3. split the patch("add support of acpi for hns-mdio") into two patches:
    3.1 Move to use fwnode_handle
    3.2 Add ACPI
 4. add the patch which subject is dsaf misc operation method
 5. fix the comments by Andy Shevchenko
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enet needs to get configration parameter by acpi. This patch
adds support of ACPI for enet. The configuration parameter will
be configed in BIOS.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The miscellaneous operation is implemented in BIOS, the kernel can call
_DSM method help to call the implementation in ACPI case. Here is a patch
to do that.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In ACPI case, there is no interface to register phy device to mdio-bus.
Phy device has to be registered itself to mdio-bus, and then enet can
get the phy device's info so that it can config the phy-device to help
to trasmit and receive data.
HNS hardware topology is as below. The MDIO controller may control several
PHY-devices, and each PHY-device connects to a MAC device. PHY-devices
will register when each mac find PHY device in initial sequence.

                       cpu
                        |
                        |
     -------------------------------------------
    |                   |                       |
    |                   |                       |
    |                  dsaf                     |
   MDIO                 |                      MDIO
    |      ---------------------------          |
    |     |         |         |       |         |
    |     |         |         |       |         |
    |    MAC       MAC       MAC     MAC        |
    |     |         |         |       |         |
     ---- |-------- |-------- |       | --------
         ||        ||        ||       ||
         PHY       PHY       PHY     PHY
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dsaf needs to get configuration parameter by ACPI, so this patch add
support of ACPI.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The misc operation for different hw platform may be different, if using
current implementation, it will add a new branch on each function for
every new hw platform, so we add a method for this operation.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As device_node is only used by DT case, HNS needs to treat the other
cases including ACPI. It needs to use uniform ways to handle both of
DT and ACPI. This patch chooses phy_device, and of_phy_connect and
of_phy_attach are only used by DT case. It needs to use uniform interface
to handle that sequence by both DT and ACPI.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As device_node is only used by DT case, it is expected to find uniform
ways. So fwnode_handle is the suitable method.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As irq_of_parse_and_map is only used by DT case, it is excepted to use
a uniform interface. So it is used platform_get_irq() instead.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OF series functions can be used only for DT case. Use unified
device property function instead to support both DT and ACPI.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hns-mdio needs to register itself to mii-bus. The info of the device can
be read by both DT and ACPI.
HNS tries to call Linux PHY driver to help access PHY-devices, the HNS
hardware topology is as below. The MDIO controller may control several
PHY-devices, and each PHY-device connects to a MAC device. The MDIO will
be registered to mdiobus, then PHY-devices will register when each mac
find PHY device.
                       cpu
                        |
                        |
     -------------------------------------------
    |                   |                       |
    |                   |                       |
    |                  dsaf                     |
   MDIO                 |                      MDIO
    |      ---------------------------          |
    |     |         |         |       |         |
    |     |         |         |       |         |
    |    MAC       MAC       MAC     MAC        |
    |     |         |         |       |         |
     ---- |-------- |-------- |       | --------
         ||        ||        ||       ||
         PHY       PHY       PHY     PHY

And the driver can handle reset sequence by _RST method in DSDT in ACPI
case.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hns-mdio only supports DT case now. do some cleanup to prepare
for introducing other cases later, no functional change.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

acpi_evaluate_dsm() will be used to handle the _DSM method in ACPI case.
It will be compiled in non-ACPI case, but the function is in acpi_bus.h
and acpi_bus.h can only be used in ACPI case, so this patch add the stub
function to linux/acpi.h to make compiled successfully in non-ACPI cases.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

acpi_dev_found() will be used to detect if a given ACPI device is in the
system. It will be compiled in non-ACPI case, but the function is in
acpi_bus.h and acpi_bus.h can only be used in ACPI case, so this patch add
the stub function to linux/acpi.h to make compiled successfully in
non-ACPI cases.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
New DSA bind, switches as devices

The interesting patches here are the last three. They implement a new
binding for DSA, which removes a few limitations of the current DSA
binding. In particular, it allows switches to be true Linux devices.
These devices can be on any type of bus, unlike the old DSA binding
which assumes MDIO. See the commit log for more details. The second to
last patch modifies an existing boards device tree to use the new
binding, giving a good example of how switches can be true MDIO
devices. The last patch documents the new binding.

Thanks go to Florian and Vivien for reviewing, testing and bug fixing
these patches.
Tested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>

Since V1:

* Add lots of reviewed-by's
* Fix rtable comment
* dsa2: Clear cpu port mask in dsa_cpu_port_unapply()
* dsa2: Only set dsa_port_mask when port successfully configured
* dsa: clear {dsa|cpu}_port_mask on destroy

Since RFC:

* Split the mv88e6xxx MDIO refactor into a rename patch and a refactor
  patch.
* Extend commit message with comment about wrong of_node_put()
* Fix destroy of cpu and dsa ports.
* Rename _DSA_TAG_LAST to DSA_TAG_LAST and add a comment.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the new binding to the documentation of the existing binding.
Mark the old binding as deprecated.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hang the three switches of the three MDIO busses using the new DSA
binding. Also, make use of the mdio-bus and explicitly list the phys
on one device. This is not required, but good for testing.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing DSA binding has a number of limitations and problems. The
main problem is that it cannot represent a switch as a linux device,
hanging off some bus. It is limited to one CPU port. The DSA platform
device is artificial, and does not really represent hardware.

Implement a new binding which can be embedded into any type of node on
a bus to represent one switch device, and its links to other switches.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Have the switch driver register its own MDIO bus. This allows for an
mdio property in the device tree, with child nodes for phys, which
can be referenced via phandles, etc.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The switch implements a generic MDIO bus, which could host more than
PHYs. It is conventional to use _mdio_ or _mii_ in the function name,
so rename them. Also postfix make the historically first read/write
function with _direct, to help distinguish it from _indirect and _ppu.

While touching these functions, remove some of the _ prefixes, which
we are deprecating.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The switch may want to instantiate its own MDIO bus. Only do it
centrally if the switch has not already created one, and the read op
is implemented.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the two switch statements with an array lookup, and store the
result in the dsa tree structure. The drivers no longer need to know
the selected tag protocol, so remove it from the dsa switch structure.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The merged driver no longer offers the option to use DSA tagging. So
remove the code to setup the switch to do DSA tagging and hard code
the use of EDSA.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>y
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor the code to setup a single DSA/CPU port into a function of
its own, and export it, so it can be used by the new binding.

Similarly, refactor the destroy code into a function.  When destroying
the ports, don't put the of node. They should be released at the end
along with the normal ports.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new binding will not have a chip data structure, it will place the
routing directly into the switch structure. To enable backwards
compatibility, copy the routing from the chip data into the switch
structure.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With a maximum of four switches, the size of the routing table is the
same as the pointer to it. Removing it makes the code simpler.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the port device node structure into the port structure, from the
chip data. This information is needed in the next step of implementing
the new binding.

The chip data structure is used while parsing the whole old binding,
before the individual switch structures exist. With the new bindings,
this is reversed, the switches exist first, and the interconnections
between the switches is derived from the individual switch
bindings. Thus this chip data structure becomes unneeded.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
eviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are going to be more per-port members added to the switch
structure. So add a port structure and move the netdev into it.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The platform data nr_chips is used when validating a received packet,
to ensure it comes from a know switch chip. The number of possible
switches is limited to DSA_MAX_SWITCHES, so use this as the first
validation step. The new binding allows holes in the dst->ds[] array,
so also ensure ensure there is a valid dsa_switch for this packet.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DSA layer should no longer assume the switch is connected to an
MDIO bus. As a result, we cannot use the address on the MDIO bus when
forming the name of the switches internal MDIO bus for its builtin and
possibly external PHYs. The switch index is sufficient to make the
name unique, so drop the MDIO address.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lock debugging shows that there is a possible circular lock in the PPU
work code. Switch the lock order of smi_mutex and ppu_mutex to fix this.

Here's the full trace:

    [    4.341325] ======================================================
    [    4.347519] [ INFO: possible circular locking dependency detected ]
    [    4.353800] 4.6.0 #4 Not tainted
    [    4.357039] -------------------------------------------------------
    [    4.363315] kworker/0:1/328 is trying to acquire lock:
    [    4.368463]  (&ps->smi_mutex){+.+.+.}, at: [<8049c758>] mv88e6xxx_reg_read+0x30/0x54
    [    4.376313]
    [    4.376313] but task is already holding lock:
    [    4.382160]  (&ps->ppu_mutex){+.+...}, at: [<8049cac0>] mv88e6xxx_ppu_reenable_work+0x28/0xd4
    [    4.390772]
    [    4.390772] which lock already depends on the new lock.
    [    4.390772]
    [    4.398963]
    [    4.398963] the existing dependency chain (in reverse order) is:
    [    4.406461]
    [    4.406461] -> #1 (&ps->ppu_mutex){+.+...}:
    [    4.410897]        [<806d86bc>] mutex_lock_nested+0x54/0x360
    [    4.416606]        [<8049a800>] mv88e6xxx_ppu_access_get+0x28/0x100
    [    4.422906]        [<8049b778>] mv88e6xxx_phy_read+0x90/0xdc
    [    4.428599]        [<806a4534>] dsa_slave_phy_read+0x3c/0x40
    [    4.434300]        [<804943ec>] mdiobus_read+0x68/0x80
    [    4.439481]        [<804939d4>] get_phy_device+0x58/0x1d8
    [    4.444914]        [<80493ed0>] mdiobus_scan+0x24/0xf4
    [    4.450078]        [<8049409c>] __mdiobus_register+0xfc/0x1ac
    [    4.455857]        [<806a40b0>] dsa_probe+0x860/0xca8
    [    4.460934]        [<8043246c>] platform_drv_probe+0x5c/0xc0
    [    4.466627]        [<804305a0>] driver_probe_device+0x118/0x450
    [    4.472589]        [<80430b00>] __device_attach_driver+0xac/0x128
    [    4.478724]        [<8042e350>] bus_for_each_drv+0x74/0xa8
    [    4.484235]        [<804302d8>] __device_attach+0xc4/0x154
    [    4.489755]        [<80430cec>] device_initial_probe+0x1c/0x20
    [    4.495612]        [<8042f620>] bus_probe_device+0x98/0xa0
    [    4.501123]        [<8042fbd0>] deferred_probe_work_func+0x4c/0xd4
    [    4.507328]        [<8013a794>] process_one_work+0x1a8/0x604
    [    4.513030]        [<8013ac54>] worker_thread+0x64/0x528
    [    4.518367]        [<801409e8>] kthread+0xec/0x100
    [    4.523201]        [<80108f30>] ret_from_fork+0x14/0x24
    [    4.528462]
    [    4.528462] -> #0 (&ps->smi_mutex){+.+.+.}:
    [    4.532895]        [<8015ad5c>] lock_acquire+0xb4/0x1dc
    [    4.538154]        [<806d86bc>] mutex_lock_nested+0x54/0x360
    [    4.543856]        [<8049c758>] mv88e6xxx_reg_read+0x30/0x54
    [    4.549549]        [<8049cad8>] mv88e6xxx_ppu_reenable_work+0x40/0xd4
    [    4.556022]        [<8013a794>] process_one_work+0x1a8/0x604
    [    4.561707]        [<8013ac54>] worker_thread+0x64/0x528
    [    4.567053]        [<801409e8>] kthread+0xec/0x100
    [    4.571878]        [<80108f30>] ret_from_fork+0x14/0x24
    [    4.577139]
    [    4.577139] other info that might help us debug this:
    [    4.577139]
    [    4.585159]  Possible unsafe locking scenario:
    [    4.585159]
    [    4.591093]        CPU0                    CPU1
    [    4.595631]        ----                    ----
    [    4.600169]   lock(&ps->ppu_mutex);
    [    4.603693]                                lock(&ps->smi_mutex);
    [    4.609742]                                lock(&ps->ppu_mutex);
    [    4.615790]   lock(&ps->smi_mutex);
    [    4.619314]
    [    4.619314]  *** DEADLOCK ***
    [    4.619314]
    [    4.625256] 3 locks held by kworker/0:1/328:
    [    4.629537]  #0:  ("events"){.+.+..}, at: [<8013a704>] process_one_work+0x118/0x604
    [    4.637288]  #1:  ((&ps->ppu_work)){+.+...}, at: [<8013a704>] process_one_work+0x118/0x604
    [    4.645653]  #2:  (&ps->ppu_mutex){+.+...}, at: [<8049cac0>] mv88e6xxx_ppu_reenable_work+0x28/0xd4
    [    4.654714]
    [    4.654714] stack backtrace:
    [    4.659098] CPU: 0 PID: 328 Comm: kworker/0:1 Not tainted 4.6.0 #4
    [    4.665286] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
    [    4.671748] Workqueue: events mv88e6xxx_ppu_reenable_work
    [    4.677174] Backtrace:
    [    4.679674] [<8010d354>] (dump_backtrace) from [<8010d5a0>] (show_stack+0x20/0x24)
    [    4.687252]  r6:80fb3c88 r5:80fb3c88 r4:80fb4728 r3:00000002
    [    4.693003] [<8010d580>] (show_stack) from [<803b45e8>] (dump_stack+0x24/0x28)
    [    4.700246] [<803b45c4>] (dump_stack) from [<80157398>] (print_circular_bug+0x208/0x32c)
    [    4.708361] [<80157190>] (print_circular_bug) from [<8015a630>] (__lock_acquire+0x185c/0x1b80)
    [    4.716982]  r10:9ec22a00 r9:00000060 r8:8164b6bc r7:00000040 r6:00000003 r5:8163a5b4
    [    4.724905]  r4:00000003 r3:9ec22de8
    [    4.728537] [<80158dd4>] (__lock_acquire) from [<8015ad5c>] (lock_acquire+0xb4/0x1dc)
    [    4.736378]  r10:60000013 r9:00000000 r8:00000000 r7:00000000 r6:9e5e9c50 r5:80e618e0
    [    4.744301]  r4:00000000
    [    4.746879] [<8015aca8>] (lock_acquire) from [<806d86bc>] (mutex_lock_nested+0x54/0x360)
    [    4.754976]  r10:9e5e9c1c r9:80e616c4 r8:9f685ea0 r7:0000001b r6:9ec22a00 r5:8163a5b4
    [    4.762899]  r4:9e5e9c1c
    [    4.765477] [<806d8668>] (mutex_lock_nested) from [<8049c758>] (mv88e6xxx_reg_read+0x30/0x54)
    [    4.774008]  r10:80e60c5b r9:80e616c4 r8:9f685ea0 r7:0000001b r6:00000004 r5:9e5e9c10
    [    4.781930]  r4:9e5e9c1c
    [    4.784507] [<8049c728>] (mv88e6xxx_reg_read) from [<8049cad8>] (mv88e6xxx_ppu_reenable_work+0x40/0xd4)
    [    4.793907]  r7:9ffd5400 r6:9e5e9c68 r5:9e5e9cb0 r4:9e5e9c10
    [    4.799659] [<8049ca98>] (mv88e6xxx_ppu_reenable_work) from [<8013a794>] (process_one_work+0x1a8/0x604)
    [    4.809059]  r9:80e616c4 r8:9f685ea0 r7:9ffd5400 r6:80e0a1c8 r5:9f5f2e80 r4:9e5e9cb0
    [    4.816910] [<8013a5ec>] (process_one_work) from [<8013ac54>] (worker_thread+0x64/0x528)
    [    4.825010]  r10:9f5f2e80 r9:00000008 r8:80e0dc80 r7:80e0a1fc r6:80e0a1c8 r5:9f5f2e98
    [    4.832933]  r4:80e0a1c8
    [    4.835510] [<8013abf0>] (worker_thread) from [<801409e8>] (kthread+0xec/0x100)
    [    4.842827]  r10:00000000 r9:00000000 r8:00000000 r7:8013abf0 r6:9f5f2e80 r5:9ec15740
    [    4.850749]  r4:00000000
    [    4.853327] [<801408fc>] (kthread) from [<80108f30>] (ret_from_fork+0x14/0x24)
    [    4.860557]  r7:00000000 r6:00000000 r5:801408fc r4:9ec15740
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new binding does not make use of dsa_chip_data, a.k.a cd.  When
retrieving the size of the EEPROM attached to a switch, don't assume
there is a cd attached to the switch structure.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

size_t objects should be printed with %Z printf format.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit a91eb52a ("qed: Revisit chain implementation") contains an
incorrect implementation for BE platforms, as device's regpairs containing
addresses are LE and they're not converted correctly when read back.
In addition, it raises a compilation warning for 32-bit platforms where
dma_addr_t is a 32-bit variable.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
qed: RocE & iSCSI infrastructure

We plan on sending 2 new protocol drivers in the imminent future -
both our RoCE [qedr] and iSCSI [qedi] drivers. As both submissions
would be rather massive and in order to avoid collisions between them,
the common infrastructure on the qed side was prepared as an independent
patch-series to be sent ahead of those 2 submissions.

This patch series introduces in QED 2 new 'ids' - one for iscsi and
one for roce. It then goes and adds logic required for configuring
said protocols in HW. Notice it *doesn't* actually add any client using
said ids, but rather only the infrastructure to allow their later usage.

What this patch doesn't contain is the slowpath protocol-configuration
toward the firmware. I.e., it contains register-setting logic, memory
allocations, etc., but not actual flow-related configuration specific
to the protocl. Those would be sent as part of the protocol driver
submissions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RoCE and iSCSI would require some added/changed hw configuration in order
to properly run; The biggest single change being the requirement of
allocating and mapping host memory for several HW blocks that aren't being
used by qede [SRC, QM, TM, etc.].

In addition, whereas qede is only using context memory for HW blocks, the
new protocol would also require task memories to be added.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds in the ecore 2 new personalities in addition to
QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>