- 10 11月, 2014 11 次提交
-
-
由 Alexander Aring 提交于
This patch adds support for wpan_dev dump via nl802154 framework. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds support for dumping wpan_phy attributes via nl802154. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a basic nl802154 framework. Most of this code was grabbed from nl80211 framework. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds the new userspace header for nl802154. We don't place this header in include/uapi now. This header could be modified in the next time. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds new sysfs entries for wpan_phy index and name. This needed for the new 802.15.4 userspace tool. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a wpan_dev_list list into cfg802154_registered_device struct. Also adding new wpan_dev into this list while cfg802154_netdev_notifier_call. This behaviour is mostly grab from wireless core.c implementation and is needed for preparing nl802154 framework. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds an iftype argument to the wpan_dev. This is needed to get the interface type from netdev ieee802154_ptr. The subif data struct can only accessible in mac802154 branch. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a new cfg802154_rdev_list to remember all registered cfg802154_registered_device structs. This is needed to prepare the upcomming nl802154 framework. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch renames the wpan_phy_alloc function to wpan_phy_new. This naming convention is like wireless and "wiphy_new" function. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch removes the mac_params from subif data struct. Instead we manipulate the wpan attributes directly. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves all mac pib attributes into the wpan_dev struct. Furthermore we can easier access these attributes over the netdev 802154_ptr pointer. Currently this is only possible over a complicated callback structure in mac802154 because subif data structure is accessable inside mac802154 only. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 09 11月, 2014 1 次提交
-
-
由 Alexander Aring 提交于
This patch reverts commit: a7807d73 ("Bluetooth: 6lowpan: Avoid memory leak if memory allocation fails") which was wrong suggested by Alexander Aring. The function skb_unshare run also kfree_skb on failure. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.18.x
-
- 07 11月, 2014 4 次提交
-
-
由 Jaganath Kanakkassery 提交于
If a remote name request is initiated while acl connection is going on, and if it fails then mgmt_connected will be sent. Evetually after acl connection, authentication will not be initiated and userspace will never get pairing reply. < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr AA:BB:CC:DD:EE:FF ptype 0xcc18 rswitch 0x01 clkoffset 0x2306 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Inquiry Complete (0x01) plen 1 status 0x00 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr AA:BB:CC:DD:EE:FF mode 1 clkoffset 0x2306 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x0c ncmd 1 Error: Command Disallowed > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 50 bdaddr 00:0D:FD:47:53:B2 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 50 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 50 slots 5 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 50 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 50 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 50 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 This patch sends mgmt_connected in remote name command status only if conn->state is BT_CONFIG Signed-off-by: NJaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Martin Townsend 提交于
Currently we ensure that the skb is freed on every error path in IPHC decompression which makes it easy to introduce skb leaks. By centralising the skb_free into the receive function it makes future decompression routines easier to maintain. It does come at the expense of ensuring that the skb passed into the decompression routine must not be copied. Signed-off-by: NMartin Townsend <mtownsend1973@gmail.com> Acked-by: NJukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Kuba Pawlak 提交于
Opcodes in switch/case in hci_cmd_status_evt are not sorted by value. This patch restores proper ordering. Signed-off-by: NKuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Kuba Pawlak 提交于
If role switch was rejected by the controller and HCI Event: Command Status returned with status "Command Disallowed" (0x0C) the flag HCI_CONN_RSWITCH_PEND remains set. No further role switches are possible as this flag prevents us from sending any new HCI Switch Role requests and the only way to clear it is to receive a valid HCI Event Switch Role. This patch clears the flag if command was rejected. 2013-01-01 00:03:44.209913 < HCI Command: Switch Role (0x02|0x000b) plen 7 bdaddr BC:C6:DB:C4:6F:79 role 0x00 Role: Master 2013-01-01 00:03:44.210867 > HCI Event: Command Status (0x0f) plen 4 Switch Role (0x02|0x000b) status 0x0c ncmd 1 Error: Command Disallowed Signed-off-by: NKuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 06 11月, 2014 19 次提交
-
-
由 Fengguang Wu 提交于
drivers/net/ieee802154/at86rf230.c:1365:1-3: WARNING: end returns can be simpified Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch removes the af_ieee802154 defines and use the IEEE802154_EXTENDED_ADDR_LEN. We should do this everywhere in the 802.15.4 subsystem because af_ieee802154 should be normally an uapi header. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a force setting of slotted operation bit. The atben chips sometimes set these bit. The reason is unknown. Nevertheless we don't support slotted operation so we set this bit now force while probing. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds support for a random generated perm extended address for the at86rf230 driver. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adding support for a perm extended address. This is useful when a device supports an eeprom with a programmed static extended address. If a device doesn't support such eeprom or serial registers then the driver should generate a random extended address. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch cleanups the ieee802154_be64_to_le64 to have a similar function like ieee802154_le64_to_be64 only with switched source and destionation types. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a new function to convert a le64 to a be64. This is useful to translate an extended address to a netdev dev_addr. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a new function to generate a random IEEE 802.15.4 extended address. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a new define for getting the length of an extended address. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds an ieee802154_vif similar like the ieee80211_vif which holds the interface type and maybe further more attributes like the ieee80211_vif structure. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Cc: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a default interface registration for a wpan interface type. Currently the 802.15.4 subsystem need to call userspace tools to add an interface. This patch is like mac80211 handling for registration a station interface type by default. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch removes the get_phy callback from mlme ops structure. Instead we doing a dereference via ieee802154_ptr dev pointer. For backwards compatibility we need to run get_device after dereference wpan_phy via ieee802154_ptr. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch meld mac802154_netdev_register into ieee802154_if_add function. Also we have now only one alloc_netdev call with one interface setup routine "ieee802154_if_setup" instead two different one for each interface type. This patch checks via runtime the interface type and do different handling now. Additional we add the wpan_dev struct in ieee802154_sub_if_data and set the new ieee802154_ptr while netdev registration. This behaviour is very similar the mac80211 netdev registration functionality. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves the dev_hold call inside of nl-phy ieee802154_add_iface function. The ieee802154_add_iface is the only one function which use the ieee802154_if_add function and contains the corresponding dev_put call. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves and renames the mac802154_add_iface and mac802154_netdev_register functions into iface.c. The function mac802154_add_iface is renamed to ieee802154_if_add which is a similar naming convention like mac80211. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves and rename the mac802154_del_iface function into iface.c and rename the function to ieee802154_if_remove which is a similar naming convention like mac80211. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
The include/net/nl802154.h file contains a lot of prototypes which are not used inside of ieee802154 subsystem. This patch removes this file and make the only one used prototype "ieee802154_nl_start_confirm" as static declaration in ieee802154/nl-mac.c Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch reworks the wpan_phy index incrementation. It's now similar like wireless wiphy index incrementation. We move the wpan_phy index attribute inside of cfg802154_registered_device and use atomic operations instead locking mechanism via wpan_phy_mutex. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 05 11月, 2014 2 次提交
-
-
由 Dan Carpenter 提交于
The ieee802154_is_valid_extended_addr() always returns true because there is a typo. The || should be &&. Neither 0x0000000000000000ULL nor 0xffffffffffffffffULL are valid addresses. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Simon Vincent 提交于
If you use RAW sockets the transport header offset is not set by the ipv6 stack so when we get to the udp header compression it does not compress the right part of the packet. This patch adds a check for this scenario and sets the transport header offset. Signed-off-by: NSimon Vincent <simon.vincent@xsilon.com> Acked-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 04 11月, 2014 2 次提交
-
-
由 Johan Hedberg 提交于
This patch fixes the following sparse warnings in rfcomm/core.c: net/bluetooth/rfcomm/core.c:391:16: warning: dubious: x | !y net/bluetooth/rfcomm/core.c:546:24: warning: dubious: x | !y Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds an ieee802154_ptr to the net_device structure. Furthermore the 802.15.4 subsystem will introduce a nl802154 framework which is similar like the nl80211 framework and a wpan_dev structure. The wpan_dev structure will hold additional net_device attributes like address options which are 802.15.4 specific. In the upcoming nl802154 implementation we will introduce a NL802154_FLAG_NEED_WPAN_DEV like NL80211_FLAG_NEED_WDEV. For this flag an ieee802154_ptr in net_device is needed. Additional we can access the wpan_dev attributes in upper layers like IEEE 802.15.4 6LoWPAN easily. Current solution is a complicated callback interface and getting these values over subif data structure in mac802154. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 03 11月, 2014 1 次提交
-
-
由 Szymon Janc 提交于
According to Management Interface API 'Start Discovery' command should generate a Command Complete event on failure. Currently kernel is sending Command Status on early errors. This results in userspace ignoring such event due to invalid size. bluetoothd[28499]: src/adapter.c:trigger_start_discovery() bluetoothd[28499]: src/adapter.c:cancel_passive_scanning() bluetoothd[28499]: src/adapter.c:start_discovery_timeout() bluetoothd[28499]: src/adapter.c:start_discovery_complete() status 0x0a bluetoothd[28499]: Wrong size of start discovery return parameters Reported-by: NJukka Taimisto <jtt@codenomicon.com> Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-