Some servers are configured to only allow null user mounts for
guest access.  Allow nul user (anonymous) mounts e.g.
	mount -t cifs //server/share /mnt -o username=
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Do not treat filldir running out of space as an error that needs
to be returned.

Fixes Redhat bugzilla bug # 211070
Signed-off-by: NSteve French <sfrench@us.ibm.com>

When the ioprio code recently got juggled a bit, a bug was introduced.
changed_ioprio() is no longer called with interrupts disabled, so using
plain spin_lock() on the queue_lock is a bug.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If cfq_set_request() is called for a new process AND a non-fs io
request (so that __GFP_WAIT may not be set), cfq_cic_link() may
use spin_lock_irq() and spin_unlock_irq() with interrupts already
disabled.

Fix is to always use irq safe locking in cfq_cic_link()
Acked-By: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reverts commit a2b98a69.

As per Guennadi Liakhovetski, the mac address change support code breaks
some normal uses (_without_ any address changes), and until it's all
sorted out, we're better off without it.

Says Francois:

  "Go revert it.

   Despite what I claimed, I can not find a third-party confirmation by
   email that it works elsewhere.

   It would probably be enough to remove the call to
   __rtl8169_set_mac_addr() in rtl8169_hw_start() though."

See also

	http://bugzilla.kernel.org/show_bug.cgi?id=6032

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3914/1: [Jornada7xx] - Typo Fix in cpu-sa1110.c (b != B)
  [ARM] 3913/1: n2100: fix IRQ routing for second ethernet port
  [ARM] Add KBUILD_IMAGE target support
  [ARM] Fix suspend oops caused by PXA2xx PCMCIA driver
  [ARM] Fix i2c-pxa slave mode support
  [ARM] 3900/1: Fix VFP Division by Zero exception handling.
  [ARM] 3899/1: Fix the normalization of the denormal double precision number.
  [ARM] 3909/1: Disable UWIND_INFO for ARM (again)
  [ARM] Add __must_check to uaccess functions
  [ARM] Add realview SMP default configuration
  [ARM] Fix SMP irqflags support

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6:
  [PATCH] PCMCIA: fix __must_check warnings
  [PATCH] PCMCIA: handle sysfs, PCI errors
  [PATCH] Export soc_common_drv_pcmcia_remove to allow modular PCMCIA.
  [PATCH] ioremap balanced with iounmap for drivers/pcmcia
  [PATCH] pcmcia: au1000_generic fix
  [PATCH] i82092: wire up errors from pci_register_driver()
  [PATCH] CONFIG_PM=n slim: drivers/pcmcia/*
  [PATCH] pcmcia/ds: driver layer error checking
  [PATCH] pcmcia: update alloc_io_space for conflict checking for multifunction PC card
  [PATCH] pcmcia: add more IDs to hostap_cs.c
  [PATCH] pcmcia: at91_cf update

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] sc1200wdt.c pnp unregister fix.

"K4S281632b-1H" should read "K4S281632B-1H" (As it does everywhere
else). No more coffe!
Signed-off-by: NKristoffer Ericson <Kristoffer_e1@hotmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: ohci1394: revert fail on error in suspend

If no devices found or invalid parameter is specified,
scl200wdt_pnp_driver is left unregistered.
It breaks global list of pnp drivers.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Commit 61ce1efe missed the m68k initcall
sections.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

prepare_reply() adds GENL_HDRLEN to the payload (genlmsg_total_size()),
but then it does genlmsg_put()->nlmsg_put().  This means we forget to
reserve a room for 'struct nlmsghdr'.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

'return genlmsg_cancel()' in taskstats_user_cmd/taskstats_exit_send
potentially leaks a skb.  Unless we pass 'rep_skb' to the netlink layer
we own sk_buff.  This means we should always do kfree_skb() on failure.

[ Thomas acked and pointed out missing return value in original version ]
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Acked-by: NThomas Graf <tgraf@suug.ch>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some errors during preparation for suspended state can be skipped with a
warning instead of a failure of the whole suspend transition, notably an
error in pci_set_power_state.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

The second ethernet port on the Thecus n2100 was incorrectly assigned
to XINT1 instead of the correct XINT3 (PCI INTB instead of INTD), which
caused that port to be non-functional.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As reported by Martin J. Bligh <mbligh@google.com>, we let through some
non-slab bits to slab allocation through __get_vm_area_node when doing a
vmalloc.

I haven't been able to reproduce this, although I understand why it
happens: vmalloc allocates memory with

GFP_KERNEL | __GFP_HIGHMEM

and commit 52fd24ca resulted in the same
flags are passed down to cache_alloc_refill, causing the BUG.  The
following patch fixes it.

Note that when calling kmalloc_node, I am masking off __GFP_HIGHMEM with
GFP_LEVEL_MASK, whereas __vmalloc_area_node does the same with

~(__GFP_HIGHMEM | __GFP_ZERO).

IMHO, using GFP_LEVEL_MASK is preferable, but either should fix this
problem.

Signed-off-by: Giridhar Pemmasani (pgiri@yahoo.com)
Cc: Martin J. Bligh <mbligh@google.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for KBUILD_IMAGE on ARM.  This takes the usual target
specifiers (zImage/Image/etc) in the same way that powerpc does
(iow, without the arch/arm/boot prefix).
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The PXA2xx PCMCIA driver was registering a device_driver with the
platform_bus_type.  Unfortunately, this causes data outside the
device_driver structure to be dereferenced as if it were a
platform_driver structure, causing an oops.  Convert the PXA2xx
core driver to use the proper platform_driver structure.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

i2c-pxa times out when trying to enable slave mode due to an
incorrect test.  Also, check that i2c->slave is non-NULL
before dereferencing it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] cio: Make ccw_device_register() static.
  [S390] Improve AP bus device removal.
  [S390] uaccess error handling.
  [S390] cio: css_probe_device() must be called enabled.
  [S390] Initialize interval value to 0.
  [S390] sys_getcpu compat wrapper.

absent_pages_in_range() made the assumption that users of the
arch-independent zone-sizing API would not care about holes beyound the end
of physical memory.  This was not the case and was "fixed" in a patch
called "Account for holes that are outside the range of physical memory".
However, when given a range that started before a hole in "real" memory and
ended beyond the end of memory, it would get the result wrong.  The bug is
in mainline but a patch is below.

It has been tested successfully on a number of machines and architectures.
Additional credit to Keith Mannthey for discovering the problem, helping
identify the correct fix and confirming it Worked For Him.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: keith mannthey <kmannth@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch (as812) changes the kerneldoc comments explaining the return
values from queue_work(), queue_delayed_work(), and
queue_delayed_work_on().  The updated comments explain more accurately the
meaning of the return code and avoid suggesting that a 0 value means the
routine was unsuccessful.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The Jmicron JMB368 is PATA only so has the PATA on function zero.  Don't
therefore skip function zero on this device when probing
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

_cpu_down() acquires `workqueue_mutex' on its process, but doen't release it
if __cpu_disable() fails.
Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I notice that the code which implements adjtime clears the time_adjust
value before using it.  The attached patch makes the obvious fix.
Acked-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NJim Houston <jim.houston@ccur.com>
Cc: John Stultz <johnstul@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Put SYS_HYPERVISOR inside the Generic Driver Config menu where it should
be.  Otherwise xconfig displays it as a dangling (lost) menu item under
Device Drivers, all by itself (when all options are displayed).
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: <holzheu@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fill_tgid() should skip not only an already exited group leader.  If the
task has ->exit_state != 0 it already did exit_notify(), so it also did
fill_tgid_exit()->delayacct_add_tsk(->signal->stats) and we should skip it
to avoid a double accounting.

This patch doesn't close the race completely, but it cleanups the code.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove tasklist_lock from taskstats.c. find_task_by_pid() is rcu-safe.
->siglock allows us to traverse subthread without tasklist.

Q: delay accounting looks wrong to me.  If sub-thread has already called
taskstats_exit_send() but didn't call release_task(self) yet it will be
accounted twice.  The window is big.  No?
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

signal_struct is (mostly) protected by ->sighand->siglock, I think we don't
need ->taskstats_lock to protect ->stats.  This also allows us to simplify the
locking in fill_tgid().
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Every subthread (except first) does unneeded kmem_cache_alloc/kmem_cache_free.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

taskstats_tgid_free() is called on copy_process's error path. This is wrong.

	IF (clone_flags & CLONE_THREAD)
		We should not clear ->signal->taskstats, current uses it,
		it probably has a valid accumulated info.
	ELSE
		taskstats_tgid_init() set ->signal->taskstats = NULL,
		there is nothing to free.

Move the callsite to __exit_signal(). We don't need any locking, entire
thread group is exiting, nobody should have a reference to soon to be
released ->signal.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

1. ts = timespec_sub(uptime, current->group_leader->start_time);

   It is possible that current != tsk. Probably it was supposed
   to be 'tsk->group_leader->start_time. But why we are reading
   group_leader's start_time ? This accounting is per thread,
   not per procees, I changed this to 'tsk->start_time.
   Please corect me.

2. stats->ac_ppid = (tsk->parent) ? tsk->parent->pid : 0;

   tsk->parent never == NULL, and it is unsafe to dereference it.
   Both the task and it's parent may exit after the caller unlocks
   tasklist_lock, the memory could be unmapped (DEBUG_SLAB).
   (And we should use ->real_parent->tgid in fact).

Q: I don't understand the 'if (thread_group_leader(tsk))' check.
Why it is needed ?
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: NJay Lan <jlan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

1. fill_tgid() forgets to do put_task_struct(first).

2. release_task(first) can happen after fill_tgid() drops tasklist_lock,
   it is unsafe to dereference first->signal.

This is a temporary fix, imho the locking should be reworked.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

strstrip() does not remove the last blank from strings which only consist
of blanks.

Example:
char string[] = "  ";
strstrip(string);

results in " ", but should produce an empty string!

The following patch solves this problem:
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by Joern Engel <joern@wh.fh-wedel.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This means we can call it when the bitmap we want to fetch is declared
const.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With Vasily Averin <vvs@sw.ru>

Fix an error in unused dentry counting in shrink_dcache_for_umount_subtree()
in which the count is modified without the dcache_lock held.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Vasily Averin <vvs@sw.ru>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On the the following patch:
http://linux.bkbits.net:8080/linux-2.6/gnupatch@449b144ecSF1rYskg3q-SeR2vf88zg

# ChangeSet
#   2006/06/22 15:05:57-07:00 neilb@suse.de
#   [PATCH] Fix dcache race during umount

#   If prune_dcache finds a dentry that it cannot free, it leaves it where it
#   is (at the tail of the list) and exits, on the assumption that some other
#   thread will be removing that dentry soon.

However as far as I see this comment is not correct: when we cannot take
s_umount rw_semaphore (for example because it was taken in do_remount) this
dentry is already extracted from dentry_unused list and we do not add it
into the list again.  Therefore dentry will not be found by prune_dcache()
and shrink_dcache_sb() and will leave in memory very long time until the
partition will be unmounted.

The patch adds this dentry into tail of the dentry_unused list.
Signed-off-by: NVasily Averin <vvs@sw.ru>
Cc: Neil Brown <neilb@suse.de>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If you truncated an mmap'ed hugetlbfs file, then faulted on the truncated
area, /proc/meminfo's HugePages_Rsvd wrapped hugely "negative".  Reinstate my
preliminary i_size check before attempting to allocate the page (though this
only fixes the most obvious case: more work will be needed here).
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

hugetlb_vmtruncate_list was misconverted to prio_tree: its prio_tree is in
units of PAGE_SIZE (PAGE_CACHE_SIZE) like any other, not HPAGE_SIZE (whereas
its radix_tree is kept in units of HPAGE_SIZE, otherwise slots would be
absurdly sparse).

At first I thought the error benign, just calling __unmap_hugepage_range on
more vmas than necessary; but on 32-bit machines, when the prio_tree is
searched correctly, it happens to ensure the v_offset calculation won't
overflow.  As it stood, when truncating at or beyond 4GB, it was liable to
discard pages COWed from lower offsets; or even to clear pmd entries of
preceding vmas, triggering exit_mmap's BUG_ON(nr_ptes).
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>