Move the subcommand-related files from perf to a new library named
libsubcmd.a.

Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support for selecting and processing PERF_RECORD_SWITCH events for
use by Intel PT.  If they are available, they will be used in preference
to sched_switch events.

This enables an unprivileged user to trace multi-threaded or
multi-process workloads with any level of perf_event_paranoid.  However
it depends on kernel support for PERF_RECORD_SWITCH.

Without this patch, tracing a multi-threaded workload will decode
without error but all the data will be attributed to the main thread.

Without this patch, tracing a multi-process workload will result in
decoder errors because the decoder will not know which executable is
executing.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439458857-30636-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

CYC packets are a new Intel PT feature.

CYC packets provide even finer grain timestamp information than MTC and
TSC packets.  A CYC packet contains the number of CPU cycles since the
last CYC packet. Unlike MTC and TSC packets, CYC packets are only sent
when another packet is also sent.

Support for this feature is indicated by:

/sys/bus/event_source/devices/intel_pt/caps/psb_cyc

which contains "1" if the feature is supported and "0" otherwise.

CYC packets can be requested using a PMU config term e.g. perf record -e
intel_pt/cyc/u sleep 1

The frequency of CYC packets can also be specified.  e.g. perf record -e
intel_pt/cyc,cyc_thresh=2/u sleep 1

CYC packets are not requested by default.

Valid cyc_thresh values are given by:

/sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds

which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.

The value represents the minimum number of CPU cycles that must have
passed before a CYC packet can be sent.  The number of CPU cycles is:

    2 ^ (value - 1)

e.g. value 4 means 8 CPU cycles must pass before a CYC packet can be
sent.  Note a CYC packet is still only sent when another packet is sent,
not at, e.g. every 8 CPU cycles.

If an invalid value is entered, the error message will give a list of
valid values e.g.

    $ perf record -e intel_pt/cyc,cyc_thresh=15/u uname
    Invalid cyc_thresh for intel_pt. Valid values are: 0-12

tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.

For more information refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-24-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

MTC packets are a new Intel PT feature.

MTC packets provide finer grain timestamp information than TSC packets.

Support for this feature is indicated by:

  /sys/bus/event_source/devices/intel_pt/caps/mtc

which contains "1" if the feature is supported and "0" otherwise.

MTC packets can be requested using a PMU config term e.g. perf record -e
intel_pt/mtc/u sleep 1

The frequency of MTC packets can also be specified.  e.g. perf record -e
intel_pt/mtc,mtc_period=2/u sleep 1

The default value is 3 or the nearest lower value that is supported.  0
is always supported.

Valid values are given by:

/sys/bus/event_source/devices/intel_pt/caps/mtc_periods

which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.

The value is converted to the MTC frequency as:

	CTC-frequency / (2 ^ value)

e.g. value 3 means one eighth of CTC-frequency

Where CTC is the hardware crystal clock, the frequency of which can be
related to TSC via values provided in cpuid leaf 0x15.

If an invalid value is entered, the error message will give a list of
valid values e.g.

	$ perf record -e intel_pt/mtc_period=15/u uname
	Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9

tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.

For more information refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-22-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Record additional information in the AUXTRACE_INFO event in preparation
for decoding MTC and CYC packets.  Pass the information to the decoder.

The AUXTRACE_INFO record can be extended by using the size to indicate
the presence of new members.

The additional information includes PMU config bit positions and the TSC
to CTC (hardware crystal clock) ratio needed to decode MTC packets.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-20-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The PSB packet is a synchronization packet that provides a starting
point for decoding or recovery from errors.

This patch adds support for a new Intel PT feature that allows the
frequency of PSB packets to be specified.

Support for this feature is indicated by
/sys/bus/event_source/devices/intel_pt/caps/psb_cyc which contains "1"
if the feature is supported and "0" otherwise.

The PSB period can be specified as a PMU config term e.g. perf record -e
intel_pt/psb_period=2/u sleep 1

The default value is 3 or the nearest lower value that is supported.  0
is always supported.

Valid values are given by:

/sys/bus/event_source/devices/intel_pt/caps/psb_periods

which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.

The value is converted to the approximate number of trace bytes between
PSB packets as:

	2 ^ (value + 11)

e.g. value 3 means 16KiB bytes between PSBs

If an invalid value is entered, the error message will give a list of
valid values e.g.

	$ perf record -e intel_pt/psb_period=15/u uname
	Invalid psb_period for intel_pt. Valid values are: 0-5

tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.

For more information about PSB periods refer to the Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace from June 2015 or
later.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-18-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support for Intel Processor Trace.

Intel PT support fits within the new auxtrace infrastructure.  Recording
is supporting by identifying the Intel PT PMU, parsing options and
setting up events.

Decoding is supported by queuing up trace data by cpu or thread and then
decoding synchronously delivering synthesized event samples into the
session processing for tools to consume.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>