Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace accordingly where needed.

Note that some bool/obj-y instances remain since module.h is
the header for some exception table entry stuff, and for things
like __init_or_module (code that is tossed when MODULES=n).
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160714001901.31603-3-paul.gortmaker@windriver.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Minor. Reordered a few lines to lose a superfluous OR operation.
Signed-off-by: NMartin Bundgaard <martin@mindflux.org>
Link: http://lkml.kernel.org/r/1363286075-62615-1-git-send-email-martin@mindflux.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that NUMA init path is unified, amdtopology can be enabled on
32bit.  Make amdtopology.c safe on 32bit by explicitly using u64 and
drop X86_64 dependency from Kconfig.

Inclusion of bootmem.h is added for max_pfn declaration.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>

amdtopology is going to be used by 32bit too drop _64 suffix.  This is
pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>

NUMA emulation needs to update node distance information.  It did it
by remapping apicid to PXM mapping, even when amdtopology is being
used.  There is no reason to go through such convolution.  The generic
code has all the information necessary to transform the distance table
to the emulated nid space.

Implement generic distance table transformation in numa_emulation()
and drop private implementations in srat_64 and amdtopology_64.  This
makes find_node_by_addr() and fake_physnodes() and related functions
unnecessary, drop them.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

NUMA emulation changes node mappings and thus apicid -> node mapping
needs to be updated accordingly.  srat_64 and amdtopology_64 did this
separately; however, all the necessary information is the mapping from
emulated nodes to physical nodes which is available in
emu_nid_to_phys[].

Implement common __apicid_to_node[] transformation in numa_emulation()
and drop duplicate implementations.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

With all memory configuration information now carried in numa_meminfo,
there's no need to keep mem_nodes_parsed separate.  Drop it and use
numa_nodes_parsed for CPU / memory-less nodes.

A new helper numa_nodemask_from_meminfo() is added to calculate
memnode mask on the fly which is currently used to set
node_possible_map.

This simplifies NUMA init methods a bit and removes a source of
possible inconsistencies.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

It's no longer necessary to keep both cpu_nodes_parsed and
mem_nodes_parsed.  In preparation for merge, rename cpu_nodes_parsed
to numa_nodes_parsed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

numa_nodes[] doesn't carry any information which isn't present in
numa_meminfo.  Each entry is simply min/max range of all the memblks
for the node.  This is not only redundant but also inaccurate when
memblks for different nodes interleave - for example,
find_node_by_addr() can return the wrong nodeid.

Kill numa_nodes[] and always use numa_meminfo instead.

* nodes_cover_memory() is renamed to numa_meminfo_cover_memory() and
  now operations on numa_meminfo and returns bool.

* setup_node_bootmem() needs min/max range.  Compute the range on the
  fly.  setup_node_bootmem() invocation is restructured to use outer
  loop instead of hardcoding the double invocations.

* find_node_by_addr() now operates on numa_meminfo.

* setup_physnodes() builds physnodes[] from memblks.  This will go
  away when emulation code is updated to use struct numa_meminfo.

This patch also makes the following misc changes.

* Clearing of nodes_add[] clearing is converted to memset().

* numa_add_memblk() in amd_numa_init() is moved down a bit for
  consistency.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

srat_64.c and amdtopology_64.c had their own versions of
find_node_by_addr() which were basically the same.  Add common one in
numa_64.c and remove the duplicates.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

They are empty now.  Kill them.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Move the remaining memblk registration logic from acpi_scan_nodes() to
numa_register_memblks() and initmem_init().

This applies nodes_cover_memory() sanity check, memory node sorting
and node_online() checking, which were only applied to acpi, to all
init methods.

As all memblk registration is moved to common code, active range
clearing is moved to initmem_init() too and removed from bad_srat().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Make both amd and dummy use numa_add_memblk() to describe the detected
memory blocks.  This allows initmem_init() to call
numa_register_memblk() regardless of init method in use.  Drop custom
memory registration codes from amd and dummy.

After this change, memblk merge/cleanup in numa_register_memblks() is
applied to all init methods.

As this makes compute_hash_shift() and numa_register_memblks() used
only inside numa_64.c, make them static.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

With common numa_nodes[], common code in numa_64.c can access it
directly.  Copy directly and kill {acpi|amd}_get_nodes().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

ACPI and amd are using separate nodes[] array.  Add numa_nodes[] and
use them in all NUMA init methods.  cutoff_node() cleanup is moved
from srat_64.c to numa_64.c and applied in initmem_init() regardless
of init methods.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

This brings amd initialization behavior closer to that of acpi.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

Use weight count on mem_nodes_parsed instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

ACPI and amd are using separate nodes_parsed masks.  Add
{cpu|mem}_nodes_parsed and use them in all NUMA init methods.
Initialization of the masks and building node_possible_map are now
handled commonly by initmem_init().

dummy_numa_init() is updated to set node 0 on both masks.  While at
it, move the info messages from scan to init.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

The functions used during NUMA initialization - *_numa_init() and
*_scan_nodes() - have different arguments and return values.  Unify
them such that they all take no argument and return 0 on success and
-errno on failure.  This is in preparation for further NUMA init
cleanups.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>

The mapping between cpu/apicid and node is done via
apicid_to_node[] on 64bit and apicid_2_node[] +
apic->x86_32_numa_cpu_node() on 32bit. This difference makes it
difficult to further unify 32 and 64bit NUMA handling.

This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed
by two accessors - set_apicid_to_node() and numa_cpu_node().  On
64bit, numa_cpu_node() always consults __apicid_to_node[]
directly while 32bit goes through apic->numa_cpu_node() method
to allow apic implementations to override it.

srat_detect_node() for amd cpus contains workaround for broken
NUMA configuration which assumes relationship between APIC ID,
HT node ID and NUMA topology.  Leave it to access
__apicid_to_node[] directly as mapping through CPU might result
in undesirable behavior change.  The comment is reformatted and
updated to note the ugliness.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-14-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>

Introduce init_memory_mapping_high(), and use it with 64bit.

It will go with every memory segment above 4g to create page table to the
memory range itself.

before this patch all page tables was on one node.

with this patch, one RED-PEN is killed

debug out for 8 sockets system after patch
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f750000 page 4k
[    0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff]
[    0.000000] RAMDISK: 7bc84000 - 7f745000
....
[    0.000000] Adding active range (0, 0x10, 0x95) 0 entries of 3200 used
[    0.000000] Adding active range (0, 0x100, 0x7f750) 1 entries of 3200 used
[    0.000000] Adding active range (0, 0x100000, 0x1080000) 2 entries of 3200 used
[    0.000000] Adding active range (1, 0x1080000, 0x2080000) 3 entries of 3200 used
[    0.000000] Adding active range (2, 0x2080000, 0x3080000) 4 entries of 3200 used
[    0.000000] Adding active range (3, 0x3080000, 0x4080000) 5 entries of 3200 used
[    0.000000] Adding active range (4, 0x4080000, 0x5080000) 6 entries of 3200 used
[    0.000000] Adding active range (5, 0x5080000, 0x6080000) 7 entries of 3200 used
[    0.000000] Adding active range (6, 0x6080000, 0x7080000) 8 entries of 3200 used
[    0.000000] Adding active range (7, 0x7080000, 0x8080000) 9 entries of 3200 used
[    0.000000] init_memory_mapping: [0x00000100000000-0x0000107fffffff]
[    0.000000]  0100000000 - 1080000000 page 2M
[    0.000000] kernel direct mapping tables up to 1080000000 @ [0x107ffbd000-0x107fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x107ffc2000-0x107fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00001080000000-0x0000207fffffff]
[    0.000000]  1080000000 - 2080000000 page 2M
[    0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x207ffc0000-0x207fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00002080000000-0x0000307fffffff]
[    0.000000]  2080000000 - 3080000000 page 2M
[    0.000000] kernel direct mapping tables up to 3080000000 @ [0x307ff3d000-0x307fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x307ffc0000-0x307fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00003080000000-0x0000407fffffff]
[    0.000000]  3080000000 - 4080000000 page 2M
[    0.000000] kernel direct mapping tables up to 4080000000 @ [0x407fefd000-0x407fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x407ffc0000-0x407fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00004080000000-0x0000507fffffff]
[    0.000000]  4080000000 - 5080000000 page 2M
[    0.000000] kernel direct mapping tables up to 5080000000 @ [0x507febd000-0x507fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x507ffc0000-0x507fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00005080000000-0x0000607fffffff]
[    0.000000]  5080000000 - 6080000000 page 2M
[    0.000000] kernel direct mapping tables up to 6080000000 @ [0x607fe7d000-0x607fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x607ffc0000-0x607fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00006080000000-0x0000707fffffff]
[    0.000000]  6080000000 - 7080000000 page 2M
[    0.000000] kernel direct mapping tables up to 7080000000 @ [0x707fe3d000-0x707fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x707ffc0000-0x707fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00007080000000-0x0000807fffffff]
[    0.000000]  7080000000 - 8080000000 page 2M
[    0.000000] kernel direct mapping tables up to 8080000000 @ [0x807fdfc000-0x807fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x807ffbf000-0x807fffffff]          PGTABLE
[    0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff]
[    0.000000]   NODE_DATA [0x0000107ffbd000-0x0000107ffc1fff]
[    0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff]
[    0.000000]   NODE_DATA [0x0000207ffbb000-0x0000207ffbffff]
[    0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff]
[    0.000000]   NODE_DATA [0x0000307ffbb000-0x0000307ffbffff]
[    0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff]
[    0.000000]   NODE_DATA [0x0000407ffbb000-0x0000407ffbffff]
[    0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff]
[    0.000000]   NODE_DATA [0x0000507ffbb000-0x0000507ffbffff]
[    0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff]
[    0.000000]   NODE_DATA [0x0000607ffbb000-0x0000607ffbffff]
[    0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff]
[    0.000000]   NODE_DATA [0x0000707ffbb000-0x0000707ffbffff]
[    0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff]
[    0.000000]   NODE_DATA [0x0000807ffba000-0x0000807ffbefff]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933D1.9020609@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

NUMA boot code assumes that physical node ids start at 0, but the DIMMs
that the apic id represents may not be reachable.  If this is the case,
node 0 is never online and cpus never end up getting appropriately
assigned to a node.  This causes the cpumask of all online nodes to be
empty and machines crash with kernel code assuming online nodes have
valid cpus.

The fix is to appropriately map all the address ranges for physical nodes
and ensure the cpu to node mapping function checks all possible nodes (up
to MAX_NUMNODES) instead of simply checking nodes 0-N, where N is the
number of physical nodes, for valid address ranges.

This requires no longer "compressing" the address ranges of nodes in the
physical node map from 0-N, but rather leave indices in physnodes[] to
represent the actual node id of the physical node.  Accordingly, the
topology exported by both amd_get_nodes() and acpi_get_nodes() no longer
must return the number of nodes to iterate through; all such iterations
will now be to MAX_NUMNODES.

This change also passes the end address of system RAM (which may be
different from normal operation if mem= is specified on the command line)
before the physnodes[] array is populated.  ACPI parsed nodes are
truncated to fit within the address range that respect the mem=
boundaries and even some physical nodes may become unreachable in such
cases.

When NUMA emulation does succeed, any apicid to node mapping that exists
for unreachable nodes are given default values so that proximity domains
can still be assigned.  This is important for node_distance() to
function as desired.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221702090.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This patch adds the equivalent of acpi_fake_nodes() for AMD Northbridge
platforms.  The goal is to fake the apicid-to-node mappings for NUMA
emulation so the physical topology of the machine is correctly maintained
within the kernel.

This change also fakes proximity domains for both ACPI and k8 code so the
physical distance between emulated nodes is maintained via
node_distance().  This exports the correct distances via
/sys/devices/system/node/.../distance based on the underlying topology.

A new helper function, fake_physnodes(), is introduced to correctly
invoke the correct NUMA code to fake these two mappings based on the
system type.  If there is no underlying NUMA configuration, all cpus are
mapped to node 0 for local distance.

Since acpi_fake_nodes() is no longer called with CONFIG_ACPI_NUMA, it's
prototype can be removed from the header file for such a configuration.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701360.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Both acpi_get_nodes() and amd_get_nodes() are only necessary when
CONFIG_NUMA_EMU is enabled, so avoid compiling them when the option is
disabled.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701210.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

It is almost the same as smp_register_lapic_addr(). We just need to
let smp_read_mpc() call smp_register_lapic_addr() when early==1.

Add the apic_printk to smp_register_lapic_address()
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF681.3030509@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Not only the naming of the files was confusing, it was even more so for
the function and variable names.

Renamed the K8 NB and NUMA stuff that is also used on other AMD
platforms. This also renames the CONFIG_K8_NUMA option to
CONFIG_AMD_NUMA and the related file k8topology_64.c to
amdtopology_64.c. No functional changes intended.
Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

The file names are somehow misleading as the code is not specific to
AMD K8 CPUs anymore. The files accomodate code for other AMD CPU
northbridges as well.

Same is true for the config option which is valid for AMD CPU
northbridges in general and not specific to K8.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100917160343.GD4958@loge.amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

1.include linux/memblock.h directly. so later could reduce e820.h reference.
2 this patch is done by sed scripts mainly

-v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

boot_cpu_id is there for historical reasons and was renamed to
boot_cpu_physical_apicid in patch:

 c70dcb74 x86: change boot_cpu_id to boot_cpu_physical_apicid

However, there are some remaining occurrences of boot_cpu_id that are
never touched in the kernel and thus its value is always 0.

This patch removes boot_cpu_id completely.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
LKML-Reference: <1279731838-1522-8-git-send-email-robert.richter@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Move the find_smp_config() call to before bootmem is initialized.
Use reserve_early() instead of reserve_bootmem() in it.

This simplifies the code, we only need to call find_smp_config()
once and can remove the now unneeded reserve parameter from
x86_init_mpparse::find_smp_config.

We thus also reduce x86's dependency on bootmem allocations.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B0BB9F2.70907@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To eventually interleave emulated nodes over physical nodes, we
need to know the physical topology of the machine without actually
registering it.  This does the k8 node setup in two parts:
detection and registration.  NUMA emulation can then used the
physical topology detected to setup the address ranges of emulated
nodes accordingly.  If emulation isn't used, the k8 nodes are
registered as normal.

Two formals are added to the x86 NUMA setup functions: `acpi' and
`k8'. These represent whether ACPI or K8 NUMA has been detected;
both cannot be true at the same time.  This specifies to the NUMA
emulation code whether an underlying physical NUMA topology exists
and which interface to use.

This patch deals solely with separating the k8 setup path into
Northbridge detection and registration steps and leaves the ACPI
changes for a subsequent patch.  The `acpi' formal is added here,
however, to avoid touching all the header files again in the next
patch.

This approach also ensures emulated nodes will not span physical
nodes so the true memory latency is not misrepresented.

k8_get_nodes() may now be used to export the k8 physical topology
of the machine for NUMA emulation.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Convert all printk's in arch/x86/mm/k8topology_64.c to use
pr_info() or pr_err() appropriately.

Adds log levels for messages currently lacking them.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251517440.14754@chino.kir.corp.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

don't register early, so we don't need to clear actived regions if it fail
to get node hash shift or wild set in nb config.

also remove nodeids array that is not needed
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

and use max_pfn directly.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

sparse mutters:
arch/x86/mm/k8topology_64.c:108:7: warning: symbol 'nodeid' shadows an earlier one
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

k8_scan_nodes is global and needs a prototype. Add the header file
which contains it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[mingo@elte.hu: split from "x86_64: get boot_cpu_id as early for k8_scan_nodes]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

For example, If the physical address layout on a two node system with 8 GB
memory is something like:
node 0: 0-2GB, 4-6GB
node 1: 2-4GB, 6-8GB

Current kernels fail to boot/detect this NUMA topology.

ACPI SRAT tables can expose such a topology which needs to be supported.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>