- 10 5月, 2016 5 次提交
-
-
由 Tom Herbert 提交于
We only need to reset network header here. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Need to use adjusted protocol value for setting inner protocol. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
GRE for IPv6 does not properly translate for GRE flags to tunnel flags and vice versa. This patch fixes that. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
In ip6gre_tnl_link_config set t->tun_len and t->hlen correctly for the configuration. For hard_header_len and mtu calculation include IPv6 header and encapsulation overhead. In ip6gre_tunnel_init_common set t->tun_len and t->hlen correctly for the configuration. Revert to setting hard_header_len instead of needed_headroom. Tested: ./ip link add name tun8 type ip6gretap remote \ 2401:db00:20:911a:face:0:27:0 local \ 2401:db00:20:911a:face:0:25:0 ttl 225 Gives MTU of 1434. That is equal to 1500 - 40 - 14 - 4 - 8. ./ip link add name tun8 type ip6gretap remote \ 2401:db00:20:911a:face:0:27:0 local \ 2401:db00:20:911a:face:0:25:0 ttl 225 okey 123 Gives MTU of 1430. That is equal to 1500 - 40 - 14 - 4 - 8 - 4. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Move l3mdev_rt6_dst_by_oif and l3mdev_get_saddr to l3mdev.c. Collapse l3mdev_get_rt6_dst into l3mdev_rt6_dst_by_oif since it is the only user and keep the l3mdev_get_rt6_dst name for consistency with other hooks. A follow-on patch adds more code to these functions making them long for inlined functions. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2016 2 次提交
-
-
由 David Ahern 提交于
Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Responses for packets to unused ports are getting lost with L3 domains. IPv4 has ip_send_unicast_reply for sending TCP responses which accounts for L3 domains; update the IPv6 counterpart tcp_v6_send_response. For icmp the L3 master check needs to be moved up in icmp6_send to properly respond to UDP packets to a port with no listener. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 5月, 2016 3 次提交
-
-
由 Pablo Neira Ayuso 提交于
The dprintf() and duprintf() functions are enabled at compile time, these days we have better runtime debugging through pr_debug() and static keys. On top of this, this debugging is so old that I don't expect anyone using this anymore, so let's get rid of this. IP_NF_ASSERT() is still left in place, although this needs that NETFILTER_DEBUG is enabled, I think these assertions provide useful context information when reading the code. Note that ARP_NF_ASSERT() has been removed as there is no user of this. Kill also DEBUG_ALLOW_ALL and a couple of pr_error() and pr_debug() spots that are inconsistently placed in the code. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Arnd Bergmann 提交于
The ipv6 gre implementation was cleaned up to share more code with the ipv4 version, but it can be enabled even when NET_IPGRE_DEMUX is disabled, resulting in a link error: net/built-in.o: In function `gre_rcv': :(.text+0x17f5d0): undefined reference to `gre_parse_header' ERROR: "gre_parse_header" [net/ipv6/ip6_gre.ko] undefined! This adds a Kconfig dependency to prevent that now invalid configuration. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 308edfdf ("gre6: Cleanup GREv6 receive path, call common GRE functions") Acked-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
It's easier for gre_parse_header to return the header length instead of filing it into a parameter. That way, the callers that don't care about the header length can just check whether the returned value is lower than zero. In gre_err, the tunnel header must not be pulled. See commit b7f8fe25 ("gre: do not pull header in ICMP error processing") for details. This patch reduces the conflict between the mentioned commit and commit 95f5c64c ("gre: Move utility functions to common headers"). Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2016 2 次提交
-
-
由 Nicolas Dichtel 提交于
The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR. Fixes: 65d7ab8d ("net: Identifier Locator Addressing module") CC: Tom Herbert <tom@herbertland.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Wang 提交于
In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: NWei Wang <weiwan@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2016 7 次提交
-
-
由 Tom Herbert 提交于
Changes in GREv6 transmit path: - Call gre_checksum, remove gre6_checksum - Rename ip6gre_xmit2 to __gre6_xmit - Call gre_build_header utility function - Call ip6_tnl_xmit common function - Call ip6_tnl_change_mtu, eliminate ip6gre_tunnel_change_mtu Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
A few generic changes to generalize tunnels in IPv6: - Export ip6_tnl_change_mtu so that it can be called by ip6_gre - Add tun_hlen to ip6_tnl structure. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
This patch renames ip6_tnl_xmit2 to ip6_tnl_xmit and exports it. Other users like GRE will be able to call this. The original ip6_tnl_xmit function is renamed to ip6_tnl_start_xmit (this is an ndo_start_xmit function). Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
- Create gre_rcv function. This calls gre_parse_header and ip6gre_rcv. - Call ip6_tnl_rcv. Doing this and using gre_parse_header eliminates most of the code in ip6gre_rcv. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Some basic changes to make IPv6 tunnel receive path look more like IPv4 path: - Make ip6_tnl_rcv non-static so that GREv6 and others can call it - Make ip6_tnl_rcv look like ip_tunnel_rcv - Switch to gro_cells_receive - Make ip6_tnl_rcv non-static and export it Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
UDP uses the generic socket backlog code, and this will soon be changed to not disable BH when protocol is called back. We need to use appropriate SNMP accessors. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We want to to make TCP stack preemptible, as draining prequeue and backlog queues can take lot of time. Many SNMP updates were assuming that BH (and preemption) was disabled. Need to convert some __NET_INC_STATS() calls to NET_INC_STATS() and some __TCP_INC_STATS() to TCP_INC_STATS() Before using this_cpu_ptr(net->ipv4.tcp_sk) in tcp_v4_send_reset() and tcp_v4_send_ack(), we add an explicit preempt disabled section. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2016 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
This is a forward-port of the original patch from Andrzej Hajda, he said: "IS_ERR_VALUE should be used only with unsigned long type. Otherwise it can work incorrectly. To achieve this function xt_percpu_counter_alloc is modified to return unsigned long, and its result is assigned to temporary variable to perform error checking, before assigning to .pcnt field. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581" Original patch from Andrzej is here: http://patchwork.ozlabs.org/patch/582970/ This patch has clashed with input validation fixes for x_tables. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 28 4月, 2016 9 次提交
-
-
由 Eric Dumazet 提交于
IPv6 ICMP stats are atomics anyway. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename IP6_UPD_PO_STATS_BH() to __IP6_UPD_PO_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename IP6_INC_STATS_BH() to __IP6_INC_STATS() and IP6_ADD_STATS_BH() to __IP6_ADD_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename NET_INC_STATS_BH() to __NET_INC_STATS() and NET_ADD_STATS_BH() to __NET_ADD_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename ICMP6_INC_STATS_BH() to __ICMP6_INC_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename TCP_INC_STATS_BH() to __TCP_INC_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename UDP_INC_STATS_BH() to __UDP_INC_STATS(), and UDP6_INC_STATS_BH() to __UDP6_INC_STATS() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In the old days (before linux-3.0), SNMP counters were duplicated, one for user context, and one for BH context. After commit 8f0ea0fe ("snmp: reduce percpu needs by 50%") we have a single copy, and what really matters is preemption being enabled or disabled, since we use this_cpu_inc() or __this_cpu_inc() respectively. We therefore kill SNMP_INC_STATS_USER(), SNMP_ADD_STATS_USER(), NET_INC_STATS_USER(), NET_ADD_STATS_USER(), SCTP_INC_STATS_USER(), SNMP_INC_STATS64_USER(), SNMP_ADD_STATS64_USER(), TCP_ADD_STATS_USER(), UDP_INC_STATS_USER(), UDP6_INC_STATS_USER(), and XFRM_INC_STATS_USER() Following patches will rename __BH helpers to make clear their usage is not tied to BH being disabled. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Similar to 3bfd8472 ("net: Use passed in table for nexthop lookups") for IPv4, if the route spec contains a table id use that to lookup the next hop first and fall back to a full lookup if it fails (per the fix 4c9bcd11 ("net: Fix nexthop lookups")). Example: root@kenny:~# ip -6 ro ls table red local 2100:1::1 dev lo proto none metric 0 pref medium 2100:1::/120 dev eth1 proto kernel metric 256 pref medium local 2100:2::1 dev lo proto none metric 0 pref medium 2100:2::/120 dev eth2 proto kernel metric 256 pref medium local fe80::e0:f9ff:fe09:3cac dev lo proto none metric 0 pref medium local fe80::e0:f9ff:fe1c:b974 dev lo proto none metric 0 pref medium fe80::/64 dev eth1 proto kernel metric 256 pref medium fe80::/64 dev eth2 proto kernel metric 256 pref medium ff00::/8 dev red metric 256 pref medium ff00::/8 dev eth1 metric 256 pref medium ff00::/8 dev eth2 metric 256 pref medium unreachable default dev lo metric 240 error -113 pref medium root@kenny:~# ip -6 ro add table red 2100:3::/64 via 2100:1::64 RTNETLINK answers: No route to host Route add fails even though 2100:1::64 is a reachable next hop: root@kenny:~# ping6 -I red 2100:1::64 ping6: Warning: source address might be selected on device other than red. PING 2100:1::64(2100:1::64) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::64: icmp_seq=1 ttl=64 time=1.33 ms With this patch: root@kenny:~# ip -6 ro add table red 2100:3::/64 via 2100:1::64 root@kenny:~# ip -6 ro ls table red local 2100:1::1 dev lo proto none metric 0 pref medium 2100:1::/120 dev eth1 proto kernel metric 256 pref medium local 2100:2::1 dev lo proto none metric 0 pref medium 2100:2::/120 dev eth2 proto kernel metric 256 pref medium 2100:3::/64 via 2100:1::64 dev eth1 metric 1024 pref medium local fe80::e0:f9ff:fe09:3cac dev lo proto none metric 0 pref medium local fe80::e0:f9ff:fe1c:b974 dev lo proto none metric 0 pref medium fe80::/64 dev eth1 proto kernel metric 256 pref medium fe80::/64 dev eth2 proto kernel metric 256 pref medium ff00::/8 dev red metric 256 pref medium ff00::/8 dev eth1 metric 256 pref medium ff00::/8 dev eth2 metric 256 pref medium unreachable default dev lo metric 240 error -113 pref medium Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2016 8 次提交
-
-
由 David Ahern 提交于
It was a simple idea -- save IPv6 configured addresses on a link down so that IPv6 behaves similar to IPv4. As always the devil is in the details and the IPv6 stack as too many behavioral differences from IPv4 making the simple idea more complicated than it needs to be. The current implementation for keeping IPv6 addresses can panic or spit out a warning in one of many paths: 1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in rt6_fill_node while handling a route dump request. 2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in fib6_del 3. Panic in fib6_purge_rt because rt6i_ref count is not 1. The root cause of all these is references related to the host route for an address that is retained. So, this patch deletes the host route every time the ifdown loop runs. Since the host route is deleted and will be re-generated an up there is no longer a need for the l3mdev fix up. On the 'admin up' side move addrconf_permanent_addr into the NETDEV_UP event handling so that it runs only once versus on UP and CHANGE events. All of the current panics and warnings appear to be related to addresses on the loopback device, but given the catastrophic nature when a bug is triggered this patch takes the conservative approach and evicts all host routes rather than trying to determine when it can be re-used and when it can not. That can be a later optimizaton if desired. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 841645b5. Ok, this puts the feature back. I've decided to apply David A.'s bug fix and run with that rather than make everyone wait another whole release for this feature. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Support checksum neutral ILA as described in the ILA draft. The low order 16 bits of the identifier are used to contain the checksum adjustment value. The csum-mode parameter is added to described checksum processing. There are three values: - adjust transport checksum (previous behavior) - do checksum neutral mapping - do nothing On output the csum-mode in the ila_params is checked and acted on. If mode is checksum neutral mapping then to mapping and set C-bit. On input, C-bit is checked. If it is set checksum-netural mapping is done (regardless of csum-mode in ila params) and C-bit will be cleared. If it is not set then action in csum-mode is taken. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Change model of xlat to be used only for input where lookup is done on the locator part of an address (comparing to locator_match as key in rhashtable). This is needed for checksum neutral translation which obfuscates the low order 16 bits of the identifier. It also permits hosts to be in muliple ILA domains (each locator can map to a different SIR address). A check is also added to disallow translating non-ILA addresses (check of type in identifier). Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add structures for identifiers, locators, and an ila address which is composed of a locator and identifier and in6_addr can be cast to it. This includes a three bit type field and enums for the types defined in ILA I-D. In ILA lwt don't allow user to set a translation for a non-ILA address (type of identifier is zero meaning it is an IID). This also requires that the destination prefix is at least 65 bytes (64 bit locator and first byte of identifier). Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We should call consume_skb(skb) when skb is properly consumed, or kfree_skb(skb) when skb must be dropped in error case. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts the following three commits: 70af921d 799977d9 f1705ec1 The feature was ill conceived, has terrible semantics, and has added nothing but regressions to the already fragile ipv6 stack. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2016 1 次提交
-
-
由 Liping Zhang 提交于
ip6_route_output() will never return a NULL pointer, so there's no need to check it. Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 22 4月, 2016 1 次提交
-
-
由 Nicolas Dichtel 提交于
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2016 1 次提交
-
-
由 Konstantin Khlebnikov 提交于
Separated from previous patch for readability. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-