Finally add support to detect a local IPV6_DONTFRAG event
and return the relevant data to the user if they've enabled
IPV6_RECVPATHMTU on the socket.  The next recvmsg() will
return no data, but have an IPV6_PATHMTU as ancillary data.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add dontfrag argument to relevant functions for
IPV6_DONTFRAG support, as well as allowing the value
to be passed-in via ancillary cmsg data.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add underlying data structure changes and basic setsockopt()
and getsockopt() support for IPV6_RECVPATHMTU, IPV6_PATHMTU,
and IPV6_DONTFRAG.  IPV6_PATHMTU is actually fully functional
at this point.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since .size is set properly in "struct pernet_operations l2tp_eth_net_ops",
allocating space for "struct l2tp_eth_net" by hand is not correct, even causes
memory leakage.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since .size is set properly in "struct pernet_operations l2tp_net_ops",
allocating space for "struct l2tp_net" by hand is not correct, even causes
memory leakage.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/wireless/ath/ath9k/phy.c
	drivers/net/wireless/iwlwifi/iwl-6000.c
	drivers/net/wireless/iwlwifi/iwl-debugfs.c

Add support to bnx2x to extract Toeplitz hash out of the receive
descriptor for use in skb->rxhash.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sky2 status ring must be big enough to handle worst case number
of status messages. It was being oversized (to handle dual port cards),
and excessive number of tx ring entries were allowed. This patch reduces
the footprint and makes sure the value is enough.

Later patch to add RSS increases the number of possible Rx status elements.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

remove DCB_PROTO_VERSION as we don't do netlink versioning
Signed-off-by: NScott Feldman <scofeldm@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change magic numbers to identifiers for X25 interface.
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Acked-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change magic numbers to identifiers for X25 interface.
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change magic numbers to identifiers for X25 interface.
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change magic numbers to identifiers for X25 interface.
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change magic numbers to identifiers for X25 interface.
also minor check patch formatting.
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Acked-by: NKarsten Keil <isdn@linux-pingi.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

V2 Feedback from John Hughes.
- Add header for userspace implementations such as xot/xoe to use
- Use explicit values for interface stability
- No changes to driver patches

V1
- Use identifiers instead of magic numbers for X25 layer 3 to device interface.
- Also fixed checkpatch notes on updated code.

[ Add new user header to include/linux/Kbuild  -DaveM ]
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__sk_dst_get() might be called from softirq, with socket lock held.

[  159.026180] include/net/sock.h:1200 invoked rcu_dereference_check()
without protection!
[  159.026261] 
[  159.026261] other info that might help us debug this:
[  159.026263] 
[  159.026425] 
[  159.026426] rcu_scheduler_active = 1, debug_locks = 0
[  159.026552] 2 locks held by swapper/0:
[  159.026609]  #0:  (&icsk->icsk_retransmit_timer){+.-...}, at:
[<ffffffff8104fc15>] run_timer_softirq+0x105/0x350
[  159.026839]  #1:  (slock-AF_INET){+.-...}, at: [<ffffffff81392b8f>]
tcp_write_timer+0x2f/0x1e0
[  159.027063] 
[  159.027064] stack backtrace:
[  159.027172] Pid: 0, comm: swapper Not tainted
2.6.34-rc5-03707-gde498c89-dirty #36
[  159.027252] Call Trace:
[  159.027306]  <IRQ>  [<ffffffff810718ef>] lockdep_rcu_dereference
+0xaf/0xc0
[  159.027411]  [<ffffffff8138e4f7>] tcp_current_mss+0xa7/0xb0
[  159.027537]  [<ffffffff8138fa49>] tcp_write_wakeup+0x89/0x190
[  159.027600]  [<ffffffff81391936>] tcp_send_probe0+0x16/0x100
[  159.027726]  [<ffffffff81392cd9>] tcp_write_timer+0x179/0x1e0
[  159.027790]  [<ffffffff8104fca1>] run_timer_softirq+0x191/0x350
[  159.027980]  [<ffffffff810477ed>] __do_softirq+0xcd/0x200
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an SKF_AD_HATYPE field to the packet ancilliary data area, giving
access to skb->dev->type, as reported in the sll_hatype field.

When capturing packets on a PF_PACKET/SOCK_RAW socket bound to all
interfaces, there doesn't appear to be a way for the filter program to
actually find out the underlying hardware type the packet was captured
on. This patch adds such ability.

This patch also handles the case where skb->dev can be NULL, such as on
netlink sockets.
Signed-off-by: NPaul Evans <leonerd@leonerd.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Account for TSO segments of an skb in TCP_MIB_OUTSEGS counter.  Without
doing this, the counter can be off by orders of magnitude from the
actual number of segments sent.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update version to indicate IDC(fw recovery) changes.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We do netif_device_attach, even if resource allocation fails.
Driver callbacks can be called, if device is attached.
All these callbacks need to be protected by ADAPTER_UP_MAGIC check.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rcv producer value should be read in spin-lock.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver should not go ahead with fw recovery if fails to acquire
semaphore.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Defining macro to set and clear driver state.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now any pci-func can start fw, whoever sees the reset ack first.
Before this, pci-func which sets the RESET state has the responsibility
to start fw.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Different class of drivers co-exist for CNA device,
there is some minimal interaction that will be required amongst
the drivers for performing some device level operations.

All the driver should follow inter driver coexistence document.

Fixing polling interval and spelling mistake.
Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added additional driver statistics to track errors in rcv/tx path.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds IPv6 support for RFC5082 Generalized TTL Security Mechanism.  

Not to users of mapped address; the IPV6 and IPV4 socket options are seperate.
The server does have to deal with both IPv4 and IPv6 socket options
and the client has to handle the different for each family.

On client:
	int ttl = 255;
	getaddrinfo(argv[1], argv[2], &hint, &result);

	for (rp = result; rp != NULL; rp = rp->ai_next) {
		s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol);
		if (s < 0) continue;

		if (rp->ai_family == AF_INET) {
			setsockopt(s, IPPROTO_IP, IP_TTL, &ttl, sizeof(ttl));
		} else if (rp->ai_family == AF_INET6) {
			setsockopt(s, IPPROTO_IPV6,  IPV6_UNICAST_HOPS, 
					&ttl, sizeof(ttl)))
		}
			
		if (connect(s, rp->ai_addr, rp->ai_addrlen) == 0) {
		   ...

On server:
	int minttl = 255 - maxhops;
   
	getaddrinfo(NULL, port, &hints, &result);
	for (rp = result; rp != NULL; rp = rp->ai_next) {
		s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol);
		if (s < 0) continue;

		if (rp->ai_family == AF_INET6)
			setsockopt(s, IPPROTO_IPV6,  IPV6_MINHOPCOUNT,
					&minttl, sizeof(minttl));
		setsockopt(s, IPPROTO_IP, IP_MINTTL, &minttl, sizeof(minttl));
			
		if (bind(s, rp->ai_addr, rp->ai_addrlen) == 0)
			break
...
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This way GSO packets don't get handled differently.

With help from Eric Dumazet.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>

If some skb are queued to our backlog, we are delaying IPI sending at
the end of net_rx_action(), increasing latencies. This defeats the
queueing, since we want to quickly dispatch packets to the pool of
worker cpus, then eventually deeply process our packets.

It's better to send IPI before processing our packets in upper layers,
from process_backlog().

Change the _and_disable_irq suffix to _and_enable_irq(), since we enable
local irq in net_rps_action(), sorry for the confusion.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also put t4_write_indirect() inside "#if 0" to avoid a "defined but not
used" compile warning.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the correct direction of byte-swapping function to fix a mistake
shown by sparse endianness checking -- c.fl0id is __be16.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NDimitris Michailidis <dm@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric's recent patch added __force, but this
place would seem to require actually doing
a byte order conversion so the printk is
consistent across architectures.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At this point, skb->destructor is not the original one (stored in
DEV_GSO_CB(skb)->destructor)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Force serialization of userspace-triggered DLPAR/mem operations
Signed-off-by: NThomas Klein <tklein@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reset a port's resources only if they're actually in an error state
Signed-off-by: NThomas Klein <tklein@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds platform data to the ks8842 driver.

Via the platform data a MAC address, to be used by the controller,
can be passed.

To ensure this MAC address is used, the MAC address is written
after each hardware reset.
Signed-off-by: NRichard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the always true #if 1. Also the unecessary re-test of ei_local->irqlock
and the unreachable printk format string.
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

kill_fasync() uses a central rwlock, candidate for RCU conversion, to
avoid cache line ping pongs on SMP.

fasync_remove_entry() and fasync_add_entry() can disable IRQS on a short
section instead during whole list scan.

Use a spinlock per fasync_struct to synchronize kill_fasync_rcu() and
fasync_{remove|add}_entry(). This spinlock is IRQ safe, so sock_fasync()
doesnt need its own implementation and can use fasync_helper(), to
reduce code size and complexity.

We can remove __kill_fasync() direct use in net/socket.c, and rename it
to kill_fasync_rcu().
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>