The Moorestown platform requires IOAPIC for all interrupts from the
south complex, since there is no legacy PIC.

Furthermore, Moorestown I/O requires PCI.  Moorestown PCI depends on PCI MMCONFIG
and DIRECT method to perform device enumeration, as there is no PCI BIOS.

[ hpa: rewrote commit message ]
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1267120934-9505-1-git-send-email-jacob.jun.pan@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

If we don't have any Moorestown CPU support compiled in, we don't need
the Moorestown PCI support either.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B858E89.7040807@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The NUMAQ initialization sets x86_init.pci.init to pci_numaq_init,
which obviously isn't defined if CONFIG_PCI isn't defined.  This
dependency was implicit in the past, because pci_numaq_init was
invoked from arch/x86/pci/legacy.c, which itself was conditioned on
CONFIG_PCI.

I suspect that no NUMA-Q machines without PCI were ever built, so
instead of complicating the code by adding #ifdefs or stub functions,
just disable this bit of the configuration space.

[ hpa: rewrote the checkin comment ]
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A321EE1F@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

While probing for the PCI fixed BAR capability in the extended PCI
configuration space we need to make sure raw_pci_ext_ops is
actually initialized.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A321E8F7@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Remove duplicated cfg[i].vector assignment.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B8493A0.6080501@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

nr_legacy_irqs and its ilk have moved to legacy_pic.

-v2: there is one in ioapic_.c
Singed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B84AAC4.2020204@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Add Moorestown platform clock setup code to the x86_init abstraction.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318D2D4@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Moorestown platform does not have PIT or HPET platform timers.  Instead it
has a bank of eight APB timers.  The number of available timers to the os
is exposed via SFI mtmr tables.  All APB timer interrupts are routed via
ioapic rtes and delivered as MSI.
Currently, we use timer 0 and 1 for per cpu clockevent devices, timer 2
for clocksource.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318D2D2@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

vRTC information is obtained from SFI tables on Moorestown, this patch parses
these tables and assign the information.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D0D@orsmsx508.amr.corp.intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Moorestown platform timer information is obtained from SFI FW tables.
This patch parses SFI table then assign the irq information to mp_irqs.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D0B@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch added Moorestown platform specific PCI init functions.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D0A@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Moorestown has no legacy PIC; point it to the null legacy PIC.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D09@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The Moorestown platform only has a few devices that actually support
PCI config cycles.  The rest of the devices use an in-RAM MCFG space
for the purposes of device enumeration and initialization.

There are a few uglies in the fake support, like BAR sizes that aren't
a power of two, sizing detection, and writes to the real devices, but
other than that it's pretty straightforward.

Another way to think of this is not really as PCI at all, but just a
table in RAM describing which devices are present, their capabilities
and their offsets in MMIO space.  This could have been done with a
special new firmware table on this platform, but given that we do have
some real PCI devices too, simply describing things in an MCFG type
space was pretty simple.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D08@orsmsx508.amr.corp.intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Some ioapic extern functions are used when CONFIG_X86_IO_APIC is not
defined.  We need the dummy functions to avoid a compile time error.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318DA07@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Moorestown platform needs apic ready early for the system timer irq
which is delievered via ioapic.  Should not impact other platforms.

In the longer term, once ioapic setup is moved before late time init,
we will not need this patch to do early apic enabling.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D07@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Move legacy_pic chip dummy functions out of init section as they might
be referenced at run time.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318D3AA@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Conflicts:
	arch/x86/kernel/apic/io_apic.c

Merge reason:
	Conflicts in arch/x86/kernel/apic/io_apic.c

Resolved Conflicts:
	arch/x86/kernel/apic/io_apic.c
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Merge reason: conflict in arch/x86/kernel/apic/io_apic.c

Resolved Conflicts:
	arch/x86/kernel/apic/io_apic.c
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The ioapic_disable_legacy() call is no longer needed for platforms do
not have legacy pic. the legacy pic abstraction has taken care it
automatically.

This patch also initialize irq-related static variables based on
information obtained from legacy_pic.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A30A7660@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch replaces legacy PIC-related global variable and functions
with the new legacy_pic abstraction.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D04@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch makes i8259A like legacy programmable interrupt controller
code into a driver so that legacy pic functions can be selected at
runtime based on platform information, such as HW subarchitecure ID.
Default structure of legacy_pic maintains the current code path for
x86pc.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D03@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Some secondary clockevent setup code needs to call request_irq, which
will cause fake stack check failure in schedule() if voluntary
preemption model is chosen.  It is safe to have stack canary
initialized here early, since start_secondary() does not return.
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D02@orsmsx508.amr.corp.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Since we already track the number of legacy vectors by nr_legacy_irqs, we
can avoid use static vector allocations -- we can use dynamic one.
Signed-off-by: NAlek Du <alek.du@intel.com>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D01@orsmsx508.amr.corp.intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Platforms like Moorestown want to override the pcibios_fixup_irqs
default function. Add it to x86_init.pci.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D00@orsmsx508.amr.corp.intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Moorestown wants to reuse pcibios_init_irq but needs to provide its
own implementation of pci_enable_irq. After we distangled the init we
can move the init_irq call to x86_init and remove the pci_enable_irq
!= NULL check in pcibios_init_irq. pci_enable_irq is compile time
initialized to pirq_enable_irq and the special cases which override it
(visws and acpi) set the x86_init function pointer to noop. That
allows MSRT to override pci_enable_irq and otherwise run
pcibios_init_irq unmodified.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFF@orsmsx508.amr.corp.intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The PCI initialization in pci_subsys_init() is a mess. pci_numaq_init,
pci_acpi_init, pci_visws_init and pci_legacy_init are called and each
implementation checks and eventually modifies the global variable
pcibios_scanned.

x86_init functions allow us to do this more elegant. The pci.init
function pointer is preset to pci_legacy_init. numaq, acpi and visws
can modify the pointer in their early setup functions. The functions
return 0 when they did the full initialization including bus scan. A
non zero return value indicates that pci_legacy_init needs to be
called either because the selected function failed or wants the
generic bus scan in pci_legacy_init to happen (e.g. visws).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFE@orsmsx508.amr.corp.intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

For use by code that needs to walk extended capability lists before
pci_dev structures are set up.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFD@orsmsx508.amr.corp.intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Version 4: use get_irq_chip_data() in destroy_irq() to get rid of some
local vars.

When two drivers are setting up MSI-X at the same time via
pci_enable_msix() there is a race.  See this dmesg excerpt:

[   85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X
[   85.170611]   alloc irq_desc for 99 on node -1
[   85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X
[   85.170614]   alloc kstat_irqs on node -1
[   85.170616] alloc irq_2_iommu on node -1
[   85.170617]   alloc irq_desc for 100 on node -1
[   85.170619]   alloc kstat_irqs on node -1
[   85.170621] alloc irq_2_iommu on node -1
[   85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X
[   85.170626]   alloc irq_desc for 101 on node -1
[   85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X
[   85.170630]   alloc kstat_irqs on node -1
[   85.170631] alloc irq_2_iommu on node -1
[   85.170635]   alloc irq_desc for 102 on node -1
[   85.170636]   alloc kstat_irqs on node -1
[   85.170639] alloc irq_2_iommu on node -1
[   85.170646] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000088

As you can see igb and ixgbe are both alternating on create_irq_nr()
via pci_enable_msix() in their probe function.

ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe
choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and
calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data =
NULL via dynamic_irq_init().

igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[]
via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this:

	cfg_new = irq_desc_ptrs[102]->chip_data;
	if (cfg_new->vector != 0)
		continue;

This hits the NULL deref.

Another possible race exists via pci_disable_msix() in a driver or in
the number of error paths that call free_msi_irqs():

destroy_irq()
dynamic_irq_cleanup() which sets desc->chip_data = NULL
...race window...
desc->chip_data = cfg;

Remove the save and restore code for cfg in create_irq_nr() and
destroy_irq() and take the desc->lock when checking the irq_cfg.
Reported-and-analyzed-by: NBrandon Philips <bphilips@suse.de>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <20100207210250.GB8256@jenkins.home.ifup.org>
Signed-off-by: NBrandon Phiilps <bphilips@suse.de>
Cc: stable@kernel.org
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Right now xen's use of the x86 and ia64 handle_irq is just bizarre and very
fragile as it is very non-obvious the function exists and is is used by
code out in drivers/....  Luckily using handle_irq is completely unnecessary,
and we can just use the generic irq apis instead.

This still leaves drivers/xen/events.c as a problematic user of the generic
irq apis it has "static struct irq_info irq_info[NR_IRQS]" but that can be
fixed some other time.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <4B7CAAD2.10803@kernel.org>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka
CONFIG_NR_CPUS.

Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on
normal config.

-v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of
     NR_CPUS.
-v3: add doc in kernel-parameters.txt according to Andrew.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-34-git-send-email-yinghai@kernel.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Tony Luck <tony.luck@intel.com>

So keep nr_irqs == NR_IRQS.  With radix trees is matters less.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-33-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Use radix_tree irq_desc_tree instead of irq_desc_ptrs.

-v2: according to Eric and cyrill to use radix_tree_lookup_slot and
     radix_tree_replace_slot
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-32-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Add replace_irq_desc() instead of poking at the array directly.

-v2: remove unneeded boundary check in replace_irq_desc
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-31-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Prepare for using radix trees in early_irq_init().
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-30-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

mem_init is moved early already.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-29-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

On the iMac9,1 /sbin/reboot results in a black mangled screen. Adding
this DMI entry gets the machine to reboot cleanly as it should.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
LKML-Reference: <1266362249-3337-1-git-send-email-justinmattock@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

nmi_lock must be a spinning spinlock in -rt.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>