- 22 9月, 2015 1 次提交
-
-
由 Matthew Garrett 提交于
There's a bunch of cheap USB 10/100 devices based on QinHeng chipsets. The vendor driver supports the CH9100 and CH9200 devices, but the majority of the code is of the if (ch9100) {} else {} form, with the most significant difference being that CH9200 provides a real MII interface but CH9100 fakes one with a bunch of global variables and magic commands. I don't have a CH9100, so it's probably better if someone who does provides an independent driver for it. In any case, this is a lightly cleaned up version of the vendor driver with all the CH9100 code dropped. Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2015 1 次提交
-
-
Repost patch of driver for LAN7800 family of USB 2.0 & USB 3.0 to Gigabit Ethernet. - remove module param which can be configurable by standard mechanism. - remove other module parms except msg_level per review comment. - update to handle byte swap for statistics structure correctly. Signed-off-by: NWoojung Huh <woojung.huh@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2015 1 次提交
-
-
由 Luca Ceresoli 提交于
Just another AX88178-based 10/100/1000 USB-to-Ethernet dongle. This one shows up in lsusb as: "Sitecom Europe B.V. LN-028 Network USB 2.0 Adapter". Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 1月, 2015 1 次提交
-
-
由 Christoph Jaeger 提交于
Support for keyword 'boolean' will be dropped later on. No functional change. Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.comSigned-off-by: NChristoph Jaeger <cj@linux.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 07 8月, 2014 1 次提交
-
-
由 Francois Romieu 提交于
It must be tristate to avoid broken dependencies with kernel built-in usb network drivers when usb support is module only. When net config option is set, least surprize default should match usb. Wireless RNDIS USB driver used to select USB_USBNET. USB_USBNET now depends on USB_NET_DRIVERS so the latter should be selected as well. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 8月, 2014 1 次提交
-
-
由 Francois Romieu 提交于
USB network drivers are already handled in drivers/net/usb/Kconfig. Let's save the maintenance burden of dependencies in drivers/net/Makefile. The newly introduced USB_NET_DRIVERS umbrella config option defaults to 'y' so as to minimize the changes of behavior. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2014 1 次提交
-
-
由 Liu Junliang 提交于
Signed-off-by: NLiu Junliang <liujunliang_ljl@163.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2014 1 次提交
-
-
由 Liu Junliang 提交于
Signed-off-by: NLiu Junliang <liujunliang_ljl@163.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 1月, 2014 1 次提交
-
-
由 hayeswang 提交于
The r8152 could support RTL8153. Update the relative descriptor. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2013 1 次提交
-
-
由 Peter Korsgaard 提交于
The driver nowadays also support dm9620/dm9621a based USB 2.0 ethernet adapters, so adjust module/driver description and Kconfig help text to match. Signed-off-by: NPeter Korsgaard <peter@korsgaard.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2013 1 次提交
-
-
由 Enrico Mioso 提交于
This driver supports devices using the NCM protocol as an encapsulation layer for other protocols, like the E3131 Huawei 3G modem. This drivers approach was heavily inspired by the qmi_wwan/cdc_mbim approach & code model. Signed-off-by: NEnrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2013 1 次提交
-
-
由 Liu Junliang 提交于
Signed-off-by: NLiu Junliang <liujunliang_ljl@163.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2013 1 次提交
-
-
由 hayeswang 提交于
Add new driver for supporting Realtek RTL8152 Based USB 2.0 Ethernet Adapters Signed-off-by: NHayes Wang <hayeswang@realtek.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2013 1 次提交
-
-
由 Robert de Vries 提交于
The Kconfig file help information incorrectly mentions that the SMSC LAN75xx config option is for SMSC LAN95xx devices. Signed-off-by: NRobert de Vries <rhdv@xs4all.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2013 1 次提交
-
-
由 Freddy Xin 提交于
This is a resubmission. Added kfree() in ax88179_get_eeprom to prevent memory leakage. Modified "__le16 rxctl" to "u16 rxctl" in "struct ax88179_data" and removed pointless casts. Removed asix_init and asix_exit functions and added "module_usb_driver(ax88179_178a_driver)". Fixed endianness issue on big endian systems and verified this driver on iBook G4. Removed steps that change net->features in ax88179_set_features function. Added "const" to ethtool_ops structure and fixed the coding style of AX88179_BULKIN_SIZE array. Fixed the issue that the default MTU is not 1500. Added ax88179_change_mtu function and enabled the hardware jumbo frame function to support an MTU higher than 1500. Fixed indentation and empty line coding style errors. The _nopm version usb functions were added to access register in suspend and resume functions. Serveral variables allocted dynamically were removed and replaced by stack variables. ax88179_get_eeprom were modified from asix_get_eeprom in asix_common. This patch adds a driver for ASIX's AX88179 family of USB 3.0/2.0 to gigabit ethernet adapters. It's based on the AX88xxx driver but the usb commands used to access registers for AX88179 are completely different. This driver had been verified on x86 system with AX88179/AX88178A and Sitcomm LN-032 USB dongles. Signed-off-by: NFreddy Xin <freddy@asix.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2013 1 次提交
-
-
由 Joe Millenbach 提交于
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com> Reviewed-by: NJamey Sharp <jamey@minilop.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 1月, 2013 1 次提交
-
-
由 Kees Cook 提交于
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NKees Cook <keescook@chromium.org> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 11月, 2012 1 次提交
-
-
由 Steve Glendinning 提交于
This patch adds support for wol wakeup on unicast, broadcast, multicast and arp frames. Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2012 1 次提交
-
-
由 Steve Glendinning 提交于
This patch adds support for wol wakeup on unicast, broadcast, multicast and arp frames. The wakeup filter code isn't pretty, but it works. Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 10月, 2012 1 次提交
-
-
由 Bjørn Mork 提交于
Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2012 1 次提交
-
-
由 Christian Riesch 提交于
Since commit 16626b0c the asix driver depends on the phylib. Select phylib when the asix driver is selected. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: kernel-janitors@vger.kernel.org Signed-off-by: NChristian Riesch <christian.riesch@omicron.at> Tested-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 3月, 2012 1 次提交
-
-
由 Bjørn Mork 提交于
Fixes: drivers/built-in.o: In function `qmi_wwan_bind_shared': qmi_wwan.c:(.text+0x25b686): undefined reference to `usb_cdc_wdm_register' make[1]: *** [.tmp_vmlinux1] Error 1 Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NBjørn Mork <bjorn@mork.no> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2012 1 次提交
-
-
由 Bjørn Mork 提交于
Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 1月, 2012 1 次提交
-
-
由 Bjørn Mork 提交于
Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 6月, 2011 1 次提交
-
-
由 Marius B. Kotsbak 提交于
Introducing driver for the network port of Samsung Kalmia based USB LTE modems. It has also an ACM interface that previous patches associates with the "option" module. To access those interfaces, the modem must first be switched from modem mode using a tool like usb_modeswitch. As the proprietary protocol has been discovered by watching the MS Windows driver behavior, there might be errors in the protocol handling, but stable and fast connection has been established for hours with Norwegian operator NetCom that distributes this modem with their LTE/4G subscription. More and updated information about how to use this driver is available here: http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465 https://github.com/mkotsbak/Samsung-GT-B3730-linux-driverSigned-off-by: NMarius B. Kotsbak <marius@kotsbak.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
- 11 4月, 2011 1 次提交
-
-
由 simon 提交于
This patch adds support for the PL-25A1 by adding the appropriate USB ID's. This chip is used in the Belkin 'Windows Easy Transfer' Cables. Signed-off-by: NSimon Wood <simon@mungewell.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2011 1 次提交
-
-
由 Andrzej Zaborowski 提交于
This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: NAndrzej Zaborowski <balrogg@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2010 1 次提交
-
-
由 Alexey Orishko 提交于
The patch provides USB CDC NCM host driver support in the Linux Kernel. Changes: drivers/net/usb/cdc_ncm.c: - initial submission of the CDC NCM host driver; - verified on Intel 32/64 bit, Intel Atom, ST-Ericsson U8500 (ARM) - throughput measured over 100 Mbits duplex; - driver supports 16-bit NTB format only, but it is more than enough for transfers up to 64K; - driver can handle up to 32 datagrams in received NTB; - timer is used to collect several packets in Tx direction drivers/net/usb/Kconfig: - a new entry to compile CDC NCM host driver drivers/net/usb/Makefile: - a new entry to compile CDC NCM host driver Signed-off-by: NAlexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 9月, 2010 1 次提交
-
-
由 Ondrej Zary 提交于
This patch introduces cx82310_eth driver - driver for USB ethernet port of ADSL routers based on Conexant CX82310 chips. Such routers usually have ethernet port(s) too which are bridged together with the USB ethernet port, allowing the USB-connected machine to communicate to the network (and also internet through the ADSL, of course). This is my first driver, so please check thoroughly. As there's no protocol documentation, it was done with usbsnoop dumps from Windows driver, some parts (the commands) inspired by cxacru driver and also other usbnet drivers. The driver passed my testing - some real work and also pings sized from 0 to 65507 B. The only problem I found is the ifconfig error counter. When I return 0 (or 1 but empty skb) from rx_fixup(), usbnet increases the error counter although it's not an error condition (because packets can cross URB boundaries). Maybe the usbnet should be fixed to allow rx_fixup() to return empty skbs (or some other value, e.g. 2)? The USB ID of my device is 0x0572:0xcb01 which conflicts with some ADSL modems using cxacru driver (they probably use the same chipset but simpler firmware). The modems seem to use bDeviceClass 0 and iProduct "ADSL USB MODEM", my router uses bDeviceClass 255 and iProduct "USB NET CARD". The driver matches only devices with class 255 and checks for the iProduct string during init. I already posted a patch for the cxacru driver to ignore these devices. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 5月, 2010 1 次提交
-
-
由 Elina Pasheva 提交于
The following patch removes the default from the Kconfig entry for sierra_net driver as recommended. Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com> Signed-off-by: NRory Filer <rfiler@sierrawireless.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2010 1 次提交
-
-
由 Elina Pasheva 提交于
Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com> Signed-off-by: NRory Filer <rfiler@sierrawireless.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2010 1 次提交
-
-
由 Diego Giagio 提交于
Add new driver to use tethering with an iPhone device. After initial submission, apply fixes to fit the new driver into the kernel standards. There are still a couple of minor (almost cosmetic-level) issues, but the driver is fully functional right now. Signed-off-by: NL. Alberto Giménez <agimenez@sysvalve.es> Signed-off-by: NDiego Giagio <diego@giagio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2010 1 次提交
-
-
由 Steve Glendinning 提交于
This patch adds a driver for SMSC's LAN7500 family of USB 2.0 to gigabit ethernet adapters. It's loosely based on the smsc95xx driver but the device registers for LAN7500 are completely different. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2009 1 次提交
-
-
由 Torgny Johansson 提交于
Signed-off-by: NTorgny Johansson <torgny.johansson@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2009 1 次提交
-
-
由 Rémi Denis-Courmont 提交于
Many Nokia handsets support a Phonet interface to the cellular modem via a vendor-specific USB interface. CDC Phonet follows the Communications Device Class model, with one control interface, and and a pair of inactive and active data alternative interface. The later has two bulk endpoint, one per direction. This was tested against Nokia E61, Nokia N95, and the existing Phonet gadget function for the Linux composite USB gadget framework. Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 6月, 2009 1 次提交
-
-
由 Jonas Sjöquist 提交于
This patch adds five PID's to the whitelist set of devices. Devices added to the whitelist: Dell Wireless 5530 HSPA Ericsson Mobile Broadband Module variants (F3507g, F3607gw and F3307) Toshiba F3507g Signed-off-by: NJonas Sjöquist <jonas.sjoquist@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 5月, 2009 1 次提交
-
-
由 Omar Laazimani 提交于
This introduces a CDC Ethernet Emulation Model (EEM) host side driver to support USB EEM devices. EEM is different from the Ethernet Control Model (ECM) currently supported by the "CDC Ethernet" driver. One key difference is that it doesn't require of USB interface alternate settings to manage interface state; some maldesigned hardware can't handle that part of USB. It also avoids a separate USB interface for control and status updates. [ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet checks, improve fault handling, EEM conformance updates, cleanup ] Signed-off-by: NOmar Laazimani <omar.oberthur@gmail.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2009 1 次提交
-
-
由 Peter Holik 提交于
usb driver for intellon int51x1 based PLC like devolo dlan duo with improvements suggested by the guys of the mailinglist: - name and prefix with int51x1 (Florian Fainelli) - use conversion functions cpu_to_le16 / le16_to_cpu (Oliver Neukum) - use pskb_may_pull instead of skb->len (Ilpo Järvinen) - better code in tx_fixup (Ilpo Järvinen) - use gotos for error handling (Ilpo Järvinen) - better description (Jon Smirl) Signed-off-by: NPeter Holik <peter@holik.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-