With DT support for Marvell XOR DMA engine, make use of it on Dove.
Also remove the now redundant code in DT board init for xor engines.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>

Since we got rid of the per-XOR channel 'mv_xor' driver, now the
per-XOR engine driver that used to be called 'mv_xor_shared' can
simply be named 'mv_xor'.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>

With true DT clock providers available switch Dove clock setup in DT-
enabled boards. While AUXDATA can be removed completely from bus probing,
some devices still don't know about DT at all. Therefore, some clock
aliases are created until the devices also move to DT.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Make use of DT support for the crypto engine on dove and remove
the obsolete init call.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

This patch fixes wrong clock names of lately added clock gates
for sata and gbe (mv64xx_eth).
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

During the review process of dove DT patches, Tauros2 cache
init call was changed and DT support added. This patch fixes
the call to Tauros2 init and adds a DT node. Moreover, plat/irq.h
include was missing from mach-dove/common.c.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

The functions for time management now take void __iomem pointers, so
we remove the temporary "unsigned long" casts from the mach-*/common.c
files.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

The registration functions for UARTs now take void __iomem pointers,
so we remove the temporary "unsigned long" casts from the
mach-*/common.c files.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

We now define all virtual base address constants using IOMEM() so that
those are naturally typed as void __iomem pointers, and we do the
necessary adjustements in the mach-dove code.

Note that we introduce a few temporary additional "unsigned long"
casts when calling into plat-orion functions. Those are removed by
followup patches converting plat-orion functions to void __iomem
pointers as well.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

This adds a generic DT_MACHINE for mach-dove. As with other orion based
SoCs there still is some glue code required to make all internal devices
work, i.e. auxdata is provided to pass clocks to corresponding device
drivers.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

This patch adds a dove specific setup function for the Marvell CESA
crypto engine available on orion based SoCs. Dove setup was just
missing a function to call orion_crypto_init with dove specific
setup.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

This patch adds clock gates from the clock gating control register
available on dove. All clock gates are hooked up to tclk, except for
gigabit ethernet controller (ge) which is a child of gephy to allow
both enabled/disabled at the same time.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

This patch synchronizes the clock setup of dove with other orion-based
platforms.

In dove_find_tclk there was a note about DOVE_SAMPLE_HI/LO register to
detect tclk. While it might be possible to set a different tclk frequency
with reset strapping the Dove datasheets don't tell anything about tclk
frequency here. Therefore, I removed that comment.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the orion include directories
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>

The tauros2_init has argument, change the calling of tauros2_init
to support argument.
Signed-off-by: NChao Xie <xiechao.mail@gmail.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

The mv643xx ethernet controller limits the packet size for the TX
checksum offloading. This patch sets this limits for Kirkwood and
Dove which have smaller limits that the default.

As a side note, this patch is an updated version of a patch sent some years
ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html
which seems to have been lost.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
Cc: <stable@vger.kernel.org>

The i/o regions are changed from 1MB to 64KB. It's likely that the 2nd
bus is not setup correctly.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

The last argument of orion_ge00_init() is actually the error
interrupt, so we should be using the correct value here.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Add missing __init markups to GPIO and timer functions.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

Let the machine pass to the platform which clock is used by the uart.
Enable the clock and use clk_get_rate() to determine its rate.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The t_clk is moved from the shared part of the ethernet driver into
the per port section. Each port can have its own gated clock, which it
needs to enable/disable, as oppossed to there being one clock shared
by all ports. In practice, only kirkwood supports this at the moment.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Remove now redundant tclk from SPI platform data. This makes the platform
data empty, so remove it.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Add tclk as a fixed rate clock for all platforms. In addition, on
kirkwood, add a gated clock for most of the clocks which can be gated.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJamie Lentin <jm@lentin.co.uk>
[mturquette@linaro.org: removed redundant CLKDEV_LOOKUP from Kconfig]
[mturquette@linaro.org: removed redundant clk.h from mach-dove/common.c]
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The patch "ARM: orion: Consolidate USB platform setup code.", commit
4fcd3f37 broke USB on TS-7800 and
other orion5x boards, because the wrong type of PHY was being passed
to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION
and all the others want EHCI_PHY_NA.

Allow the mach- code to tell the generic plat-orion code which USB PHY
enum to place into the platform data.

Version 2: Rebase to v3.3-rc2.
Reported-by: NAmbroz Bizjak <ambrop7@gmail.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NAmbroz Bizjak <ambrop7@gmail.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Hook these platforms restart code into the new restart hook rather than
using arch_reset().
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NMichael Walle <michael@walle.cc>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Move the *_mbus_dram_info structure into the orion platform and call it
orion_mbus_dram_info everywhere.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NMichael Walle <michael@walle.cc>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Commit 980f9f60 "ARM: orion: Consolidate SPI initialization."
broke it by overwriting the SPI0 registration.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Jesper Juhl pointed out there is a redundant include of
linux/serial_8250.h. However it turns out both are redundant.
This patch removes them both.
Reported-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

This change removes the interrupt resource. The driver does not use
it.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Changing eg 0xffffffff to DMA_BIT_MASK(32) etc allows easier
side by side comparision of identical code which can be consolidated.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

This patch makes the various mach dirs that use the plat-orion time
code pass in timer and bridge addresses explicitly, instead of having
plat-orion get those values by including a mach dir include file --
the latter mechanism is problematic if you want to support multiple
ARM platforms in the same kernel image.
Signed-off-by: NLennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

Signed-off-by: NMike Rapoport <mike@compulab.co.il>
CC: Saeed Bishara <saeed@marvell.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NChris Ball <cjb@laptop.org>