This patch adds more Dell systems and a Panasonic laptop with
STAC9200 codecs.
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds support for the Gateway NX860 system.
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Included is a patch against current alsa-kernel hg tip adding
quirks that Ubuntu Dapper/Edgy/Feisty contains.
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fixed some platform no sound and Add JD Function for below platform list:
     Sony(0x104d)  0x9015, 0x900e, 0x1f00
     Toshiba(0x1179)  DALLAS  0xff00, 0xff01
     Targa(0x1462) 0x28fb
     Asus(0x1043) A7J 0x060d
     Lenovo(0x17aa)  0x3bfd, 0x2085
     MEDION(0x17c0) MD2 0x4071
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

In some cases, mixer elements return -EINVAL because it couldn't
obtain proper amp_cap bits.  The patch improves the robustness,
trying the amp_cap query again in such a case.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Some verb tables (such as an Asus VT sent by IDT) contain only speaker
outs in the default pin configs, and no line-outs. In such a case the
speaker sequence numbers have to be used to order the speaker out
pins, just as is being done for line-out pins. Then, when speaker-outs
are copied to line-outs, the line-outs will be ordered properly.
Signed-off-by: NSteve Longerbeam <stevel@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

- Added ALC861VD Lenovo support (17aa:3802, 17aa:2066)
- Modify alc_subsystem_id
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix the retrival of widget connection list in the generic parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

The AMP mute bit is bit 7.  No real influence since no one uses this
definition yet, though...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix the auto-mute controls of ALC880 uniwill model.  Split to two
individual functions to handle HP and front-mic mutes.  For front-mic
mute, use snd_hda_codec_amp_update() to be consistent with mixer.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix AD1988 SPDIF playback route control for selecting ADC1-3.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

* fixed surround playback on stac922x. Pin direction control bits were
  not being set correctly in stac92xx_set_pinctl(). Specifically it
  would refuse to set the port as an output if the port was already
  configured as an input. Last hunk (#8).
* fixed an input mux bug on 92xx codecs. When there is more than one
  possible input calculated for the muxes, the actual mux widget never
  gets set from its reset default, which is index 0, in the stac9221
  case that is port E. So alsamixer/amixer/gnome-mixer report the Mic
  as being the selected input source, but in fact is something else
  (line-in port E in stac9221 case). Another problem with this is that
  if you actually try to set the mux input to 'Mic', nothing happens
  because *cur_val == idx (see snd_hda_input_mux_put). You have to
  actually toggle input source to line-in then back to mic to actually
  set the mux widget. Hunk #7.
* fixed some typos in patch_sigmatel.c. Hunk #6.
* fix to stac92xx_add_dyn_out_pins() that fixes surround playback on
  codecs with less that 4 DACs (stac9205 for example). It reads the widget
  caps cache created by hda_codec to count the total number of analog DACs
  found. It then uses that to determine whether there will be enough
  independent DACs available for line/mic switch controls. Hunk #1, #2,
  and #3.
* improvements to stac92xx_auto_fill_dac_nids() to make it more general.
  This fixes surround playback on some codecs in combination with the
  fix to stac92xx_add_dyn_out_pins() above. It reads the full connection
  list now, instead of just the first entry, and then locates an analog
  DAC in the list. If one is found and it's free, assign it to that line-out.
  If no free DAC is found for the line-out, return -ENODEV. It also makes
  sure to actually select the chosen DAC if more than one DAC is input to
  the pin. Hunks #4, #5.
Signed-off-by: NSteve Longerbeam <stevel@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Add MODULE_FIRMWARE() entries, where appropriate.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Since request_firmware() is no longer used when the internal firmware
images are used, it is no longer necessary to depend on FW_LOADER in
this case.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added a missing call to resume mixer controls for STAC92xx codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds support for 3 new HP laptops to the Conexant
'Venice' driver.
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

E-Mu 1010 is not currently supported yet. Needs development work.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Add handling of Intel-iMac-specific pinconfig of the sound card.
Intel-iMac now handled as a separated subsystem.
Signed-off-by: NSylvain FORET <sylvain.foret@anu.edu.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch is for ATI RS780 and R600 HDMI support.
Signed-off-by: NWolke Liu <wolke.liu@amd.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Prefer the name of audio codecs as the mixer name even if
modem codecs are probed before the audio codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Don't use request_firmware() if the internal firmwares are defined
via Kconfig.  Otherwise it results in a significant delay at loading
time (minutes).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fixed the model (asus-laptop) for ASUS A9rp with ALC660 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch fixes the headphone squeal and noise on Conexant CX20551
(Waikiki) audio.
Signed-off-by: NTobin Davis <gruemaster@email.uophx.edu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

- always set 256fs in SPDIF master clock mode
- disable deemphasis filter in AK4114 for Prodigy192
Signed-off-by: NPavel Hofman <dustin@seznam.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Some boards have the audio codec on slot #3 while the modem codec
on slot #0.  The driver should continue to probe the slots when
no audio codec is found.
This fixes the problem of no device on Toshiba A100 (and some other
ATI SB450 devices).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Use PIN_HP output type for HP pin widgets accordingly, instead of
always applying PIN_OUT.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added line_out_type field to auto_pin_cfg struct to provide the
pin type of default line_outs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds support for the Asus A8JN Laptop.
Other modes were tested, this one worked best.
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix the auto-configuration of 8-channel devices.  The sequence numbers
of usual 7.1 outputs are: 0/1/2/4 = Front/CLFE/Rear/Side
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

When intel8x0 driver is loaded in the crash kernel, it gets Oops
occasionally.  This is because the irq handler gets called before
the proper hardware initialization.  Now defer it after
snd_intel8x0_chip_init().
(reference: http://lkml.org/lkml/2007/3/5/252)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added the support for Gigabyte S-Series GA-M57SLI-S4 motherboard
(model=6stack-dig).
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix surround output on AD1986A codec 3stack model.
The following bugs are fixed:
- init verbs for 3stack disabled the shared surround outputs
- a channel mode change resulted in the mute of surrounds
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

First generation MacBooks were getting ignored by sigmatel drivers
and wrongly being identified as MACMINI. This patch makes them
identify as MACBOOK.
Signed-off-by: NAbhijit Bhopatkar <bainonline@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Trivial code clean-ups to follow the standard coding styles.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Merge hda-codec module to a single hda-intel module since this is the
only user right now.  Although hda-codec stuff is designed to be used
universally from different controller drivers, currently only one
controller interface (and compatibles) are used.  So, let's merge them
to a single module to save memory.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Allow opening the dedicated SPDIF stream while running on analog dup
mode.  Then the SPDIF stream is once reset and assigned for the new
stream.  It's useful for exclusive SPDIF output like AC3/DTS.
(In the former version, you had to close once the analog stream to
 play the exclusive digital stream.)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Trivial code clean-ups of patch_realtek.c: indent and whitespace fixes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added the support of 96kHz sample rate back.  Although the rate isn't
listed in the ACC_PAR_PCM bits but si3054 codecs do support this rate
explicitly.  Now fixed the deteciton code not to check this extra bit.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

- Add ALC662 support
- Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL]
- Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V]
- Add SKU ID for auto mode
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fixes:
--------
* correct card specific ice1724 initialization
* working IEC958 output of the card
* renamed capture controls
New features:
------------------
* analog input switch (line-in/mic)
* optional ak4114 based MI/ODI/O card detection & support: IEC958 input,
  digital input switch (toslink/coax)
Unresolved issues
-----------------------
* Analog and digital input enums are listed on playback panel of alsamixer,
  I do not know how to push them onto the capture one.
Signed-off-by: NPavel Hofman <dustin@seznam.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>