This patch reduces redundant spin_lock operations in alloc_nid_failed().
The alloc_nid_failed() does not need to delete entry and add one again
by triggering spin_lock and spin_unlock redundantly.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

 o mkfs.f2fs supports no discard option.
 o fixed volume label size in 512 bytes.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Commit - fa9150a8 - replaces a call to generic_writepages() in
f2fs_write_data_pages() with write_cache_pages(), with a function pointer
argument pointing to routine: __f2fs_writepage.

  -> https://git.kernel.org/linus/fa9150a84ca333f68127097c4fa1eda4b3913a22

  This patch adds a NULL pointer check in f2fs_write_data_pages() to avoid
  a possible NULL pointer dereference, in case if - mapping->a_ops->writepage -
  is NULL.
Signed-off-by: NP J P <ppandit@redhat.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Like below, there are 8 segment bitmaps for SSR victim candidates.

enum dirty_type {
	DIRTY_HOT_DATA,		/* dirty segments assigned as hot data logs */
	DIRTY_WARM_DATA,	/* dirty segments assigned as warm data logs */
	DIRTY_COLD_DATA,	/* dirty segments assigned as cold data logs */
	DIRTY_HOT_NODE,		/* dirty segments assigned as hot node logs */
	DIRTY_WARM_NODE,	/* dirty segments assigned as warm node logs */
	DIRTY_COLD_NODE,	/* dirty segments assigned as cold node logs */
	DIRTY,			/* to count # of dirty segments */
	PRE,			/* to count # of entirely obsolete segments */
	NR_DIRTY_TYPE
};

The upper 6 bitmaps indicates segments dirtied by active log areas respectively.
And, the DIRTY bitmap integrates all the 6 bitmaps.

For example,
 o DIRTY_HOT_DATA : 1010000
 o DIRTY_WARM_DATA: 0100000
 o DIRTY_COLD_DATA: 0001000
 o DIRTY_HOT_NODE : 0000010
 o DIRTY_WARM_NODE: 0000001
 o DIRTY_COLD_NODE: 0000000
In this case,
 o DIRTY          : 1111011,

 which means that we should guarantee the consistency between DIRTY and other
 bitmaps concreately.

However, the SSR mode selects victims freely from any log types, which can set
multiple bits across the various bitmap types.

So, this patch eliminates this inconsistency.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In order to do GC more reliably, I'd like to lock the vicitm summary page
until its GC is completed, and also prevent any checkpoint process.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a new condition that allocates free segments in the current
active section even if SSR is needed.
Otherwise, f2fs cannot allocate remained free segments in the section since
SSR finds dirty segments only.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The foreground GCs are triggered under not enough free sections.
So, we should not skip moving valid blocks in the victim segments.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch removes a bitmap for victim segments selected by foreground GC, and
modifies the other bitmap for victim segments selected by background GC.

1) foreground GC bitmap
 : We don't need to manage this, since we just only one previous victim section
   number instead of the whole victim history.
   The f2fs uses the victim section number in order not to allocate currently
   GC'ed section to current active logs.

2) background GC bitmap
 : This bitmap is used to avoid selecting victims repeatedly by background GCs.
   In addition, the victims are able to be selected by foreground GCs, since
   there is no need to read victim blocks during foreground GCs.

   By the fact that the foreground GC reclaims segments in a section unit, it'd
   be better to manage this bitmap based on the section granularity.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When allocating a new segment under the LFS mode, we should keep the section
boundary.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In get_node_page, we do not need to call lock_page all the time.

If the node page is cached as uptodate,

1. grab_cache_page locks the page,
2. read_node_page unlocks the page, and
3. lock_page is called for further process.

Let's avoid this.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Let's use a macro to get the total number of sections.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

A macro should not use duplicate parameter names.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Use kmemdup instead of kzalloc and memcpy.
Signed-off-by: NAlexandru Gheorghiu <gheorghiuandru@gmail.com>
Acked-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When we recover fsync'ed data after power-off-recovery, we should guarantee
that any parent inode number should be correct for each direct inode blocks.

So, let's make the following rules.

- The fsync should do checkpoint to all the inodes that were experienced hard
links.

- So, the only normal files can be recovered by roll-forward.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In the checkpoint flow, the f2fs investigates the total nat cache entries.
Previously, if an entry has NULL_ADDR, f2fs drops the entry and adds the
obsolete nid to the free nid list.
However, this free nid will be reused sooner, resulting in its nat entry miss.
In order to avoid this, we don't need to drop the nat cache entry at this moment.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch removes data_version check flow during the fsync call.
The original purpose for the use of data_version was to avoid writng inode
pages redundantly by the fsync calls repeatedly.
However, when user can modify file meta and then call fsync, we should not
skip fsync procedure.
So, let's remove this condition check and hope that user triggers in right
manner.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We should handle errors during the recovery flow correctly.
For example, if we get -ENOMEM, we should report a mount failure instead of
conducting the remained mount procedure.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Correct spelling typo in comments
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In function check_nid_range, there is no need to trigger BUG_ON and make kernel stop.
Instead it could just check and indicate the inode number to be EINVAL.
Update the return path in do_read_inode to use the return from check_nid_range.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
[Jaegeuk: replace BUG_ON with WARN_ON]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

validate super block is not returning with proper values.
When failure from sb_bread it should reflect there is an EIO otherwise
it should return of EINVAL.
Returning, '1' is not conveying proper message as the return type.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

make use of F2FS_NAME_LEN for name length checking,
change return conditions at few places, by assigning
storing the errorvalue in 'error' and making a common
exit path.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Change f2fs so that a warning is emitted when an attempt is made to
mount a filesystem with the unsupported discard option.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The fsync call should be ended after flushing the in-device caches.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The build_free_nid should not add free nids over nm_i->max_nid.
But, there was a hole that invalid free nid was added by the following scenario.

Let's suppose nm_i->max_nid = 150 and the last NAT page has 100 ~ 200 nids.

build_free_nids
  - get_current_nat_page loads the last NAT page
  - scan_nat_page can add 100 ~ 200 nids
    -> Bug here!
So, when scanning an NAT page, we should check each candidate whether it is
over max_nid or not.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If the return value of releasepage is equal to zero, the page cannot be reclaimed.
Instead, we should return 1 in order to reclaim clean pages.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When we build new free nids, let's scan the just next NAT page instead of
skipping a couple of previously scanned pages in order to reuse free nids in
there.
Otherwise, we can use too much wide range of nids even though several nids were
deallocated, and also their node pages can be cached in the node_inode's address
space.
This means that we can retain lots of clean pages in the main memory, which
induces mm's reclaiming overhead.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Currently, f2fs doesn't reclaim any node pages.
However, if we found that a node page was truncated by checking its block
address with zero during f2fs_write_node_page, we should not skip that node
page and return zero to reclaim it.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch reduces redundant locking and unlocking pages during read operations.
In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page.
And then, when we need to modify any data finally, let's lock the page so that
we can avoid lock contention.

[readpage rule]
- The f2fs_readpage returns unlocked page, or released page too in error cases.
- Its caller should handle read error, -EIO, after locking the page, which
  indicates read completion.
- Its caller should check PageUptodate after grab_cache_page.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In all the breaking conditions in get_node_path, 'n' is used to
track index in offset[] array, but while breaking out also, in all
paths n++ is done.
So, remove the ++ from breaking paths. Also, avoid
reset of 'level=0' in first case.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The maximum filename length supported in linux is 255 characters.
So let's follow that.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Optimize and change return path in lookup_free_nid_list
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We can remove the call to find_get_page to get a page from the cache
and check for up-to-date, instead we can make use of grab_cache_page
part itself to fetch the page from the cache.
So, removing the call and moving the PageUptodate at proper place, also
taken care of moving the lock_page condition in the page_hit part.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The caller of get_nid should be careful not to put lower value than
NODE_DIR1_BLOCK in case of level is zero.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously, f2fs reads several node pages ahead when get_dnode_of_data is called
with RDONLY_NODE flag.
And, this flag is set by the following functions.
- get_data_block_ro
- get_lock_data_page
- do_write_data_page
- truncate_blocks
- truncate_hole

However, this readahead mechanism is initially introduced for the use of
get_data_block_ro to enhance the sequential read performance.

So, let's clarify all the cases with the additional modes as follows.

enum {
	ALLOC_NODE,	/* allocate a new node page if needed */
	LOOKUP_NODE,	/* look up a node without readahead */
	LOOKUP_NODE_RA,	/*
			 * look up a node with readahead called
			 * by get_datablock_ro.
			 */
}
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>

The get_node_page_ra tries to:
1. grab or read a target node page for the given nid,
2. then, call ra_node_page to read other adjacent node pages in advance.

So, when we try to read a target node page by #1, we should submit bio with
READ_SYNC instead of READA.
And, in #2, READA should be used.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>

If the node page was truncated, its block address became zero.
This means that we don't need to write the node page, but have to unlock
NODE_WRITE, decrease the number of dirty node pages, and then unlock_page
before returning the f2fs_write_node_page with zero.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Use div_u64 to fix overflow when calculating utilization.
*long int* is 4-bytes on 32-bit so (user blocks * 100) might be
overflow if disk size is over e.g. 512GB.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Pull x86 fixes from Peter Anvin:
 "Several boot fixes (MacBook, legacy EFI bootloaders), another
  please-don't-brick fix, and some minor stuff."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Do not try to sync identity map for non-mapped pages
  x86, doc: Be explicit about what the x86 struct boot_params requires
  x86: Don't clear efi_info even if the sentinel hits
  x86, mm: Make sure to find a 2M free block for the first mapped area
  x86: Fix 32-bit *_cpu_data initializers
  efivarfs: return accurate error code in efivarfs_fill_super()
  efivars: efivarfs_valid_name() should handle pstore syntax
  efi: be more paranoid about available space when creating variables
  iommu, x86: Add DMA remap fault reason
  x86, smpboot: Remove unused variable

Pull drm fixes from Dave Airlie:
 "Misc radeon, nouveau, mgag200 and intel fixes.

  The intel fixes should contain the fix for the touchpad on the
  Chromebook - hey I'm an input maintainer now!"

Hate to pee on your parade, Dave, but I don't think being an input
maintainer is necessarily something to strive for..

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits)
  drm/tegra: drop "select DRM_HDMI"
  drm: Documentation typo fixes
  drm/mgag200: Bug fix: Renesas board now selects native resolution.
  drm/mgag200: Reject modes that are too big for VRAM
  drm/mgag200: 'fbdev_list' in 'struct mga_fbdev' is not used
  drm/radeon: don't check mipmap alignment if MIP_ADDRESS is FMASK
  drm/radeon: skip MC reset as it's probably not hung
  drm/radeon: add primary dac adj quirk for R200 board
  drm/radeon: don't set hpd, afmt interrupts when interrupts are disabled
  drm/i915: Turn off hsync and vsync on ADPA when disabling crt
  drm/i915: Fix incorrect definition of ADPA HSYNC and VSYNC bits
  drm/i915: also disable south interrupts when handling them
  drm/i915: enable irqs earlier when resuming
  drm/i915: Increase the RC6p threshold.
  DRM/i915: On G45 enable cursor plane briefly after enabling the display plane.
  drm/nv50-: prevent some races between modesetting and page flipping
  drm/nouveau/i2c: drop parent refcount when creating ports
  drm/nv84: fix regression in page flipping
  drm/nouveau: Fix typo in init_idx_addr_latched().
  drm/nouveau: Disable AGP on PowerPC again.
  ...

Pull ACPI and power management fixes from Rafael J Wysocki:

 - Two fixes for the new intel_pstate driver from Dirk Brandewie.

 - Fix for incorrect usage of the .find_bridge() callback from struct
   acpi_bus_type in the USB core and subsequent removal of that callback
   from Rafael J Wysocki.

 - ACPI processor driver cleanups from Chen Gang and Syam Sidhardhan.

 - ACPI initialization and error messages fix from Joe Perches.

 - Operating Performance Points documentation improvement from Nishanth
   Menon.

 - Fixes for memory leaks and potential concurrency issues and sysfs
  attributes leaks during device removal in the core device PM QoS code
  from Rafael J Wysocki.

 - Calxeda Highbank cpufreq driver simplification from Emilio López.

 - cpufreq comment cleanup from Namhyung Kim.

 - Fix for a section mismatch in Calxeda Highbank interprocessor
   communication code from Mark Langsdorf (this is not a PM fix strictly
   speaking, but the code in question went in through the PM tree).

* tag 'pm+acpi-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq / intel_pstate: Do not load on VM that does not report max P state.
  cpufreq / intel_pstate: Fix intel_pstate_init() error path
  ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  ACPI / glue: Add .match() callback to struct acpi_bus_type
  ACPI / porocessor: Beautify code, pr->id is u32 which is never < 0
  ACPI / processor: Remove redundant NULL check before kfree
  ACPI / Sleep: Avoid interleaved message on errors
  PM / QoS: Remove device PM QoS sysfs attributes at the right place
  PM / QoS: Fix concurrency issues and memory leaks in device PM QoS
  cpufreq: highbank: do not initialize array with a loop
  PM / OPP: improve introductory documentation
  cpufreq: Fix a typo in comment
  mailbox, pl320-ipc: remove __init from probe function