- 05 11月, 2008 1 次提交
-
-
由 Theodore Ts'o 提交于
Convert the unsigned longs that are most responsible for bloating the stack usage on 64-bit systems. Nearly all places in the ext3/4 code which uses "unsigned long" is probably a bug, since on 32-bit systems a ulong a 32-bits, which means we are wasting stack space on 64-bit systems. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 07 1月, 2009 1 次提交
-
-
由 Frank Mayhar 提交于
A few weeks ago I posted a patch for discussion that allowed ext4 to run without a journal. Since that time I've integrated the excellent comments from Andreas and fixed several serious bugs. We're currently running with this patch and generating some performance numbers against both ext2 (with backported reservations code) and ext4 with and without a journal. It just so happens that running without a journal is slightly faster for most everything. We did iozone -T -t 4 s 2g -r 256k -T -I -i0 -i1 -i2 which creates 4 threads, each of which create and do reads and writes on a 2G file, with a buffer size of 256K, using O_DIRECT for all file opens to bypass the page cache. Results: ext2 ext4, default ext4, no journal initial writes 13.0 MB/s 15.4 MB/s 15.7 MB/s rewrites 13.1 MB/s 15.6 MB/s 15.9 MB/s reads 15.2 MB/s 16.9 MB/s 17.2 MB/s re-reads 15.3 MB/s 16.9 MB/s 17.2 MB/s random readers 5.6 MB/s 5.6 MB/s 5.7 MB/s random writers 5.1 MB/s 5.3 MB/s 5.4 MB/s So it seems that, so far, this was a useful exercise. Signed-off-by: NFrank Mayhar <fmayhar@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 07 12月, 2008 1 次提交
-
-
由 Theodore Ts'o 提交于
This fixes a gcc warning but it doesn't appear able to result in a failure, since the primary way the loop is exited is the first conditional in the for loop, and at least for a consistent filesystem, the signed/unsigned should in practice never be exposed. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 29 10月, 2008 1 次提交
-
-
由 Theodore Ts'o 提交于
The original ext3 hash algorithms assumed that variables of type char were signed, as God and K&R intended. Unfortunately, this assumption is not true on some architectures. Userspace support for marking filesystems with non-native signed/unsigned chars was added two years ago, but the kernel-side support was never added (until now). Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 05 1月, 2009 1 次提交
-
-
由 Nick Piggin 提交于
With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: NNick Piggin <npiggin@suse.de> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 1月, 2009 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 10月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> [ All users removed in "switch all filesystems over to d_obtain_alias", aka commit 44003728 ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 10月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
Switch all users of d_alloc_anon to d_obtain_alias. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 10月, 2008 1 次提交
-
-
由 Theodore Ts'o 提交于
The ext4 filesystem is getting stable enough that it's time to drop the "dev" prefix. Also remove the requirement for the TEST_FILESYS flag. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 23 9月, 2008 1 次提交
-
-
由 Theodore Ts'o 提交于
This is a port of a patch from Linus which fixes a 200+ byte stack usage problem in ext4_get_parent(). It's more efficient to pass down only the actual parts of the dentry that matter: the parent inode and the name, instead of allocating a struct dentry on the stack. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 09 9月, 2008 2 次提交
-
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 12 7月, 2008 3 次提交
-
-
由 Li Zefan 提交于
dx_root_limit() will had some dead code which forced it to always return 20, and dx_node_limit to always return 22 for debugging purposes. Remove it. Acked-by: NAndreas Dilger <adilger@sun.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Li Zefan 提交于
ext4_next_entry() is used by the debugging function dx_show_leaf(), so it must be defined before that function. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Duane Griffin 提交于
ext4_dx_find_entry uses ext4_next_entry without verifying that the entry is valid. If its rec_len == 0 this causes an infinite loop. Refactor the loop to check the validity of entries before checking whether they match and moving onto the next one. There are other uses of ext4_next_entry in this file which also look problematic. They should be reviewed and fixed if/when we have a test-case that triggers them. This patch fixes the first case (image hdb.25.softlockup.gz) reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882. Signed-off-by: NDuane Griffin <duaneg@dghda.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
- 30 4月, 2008 2 次提交
-
-
由 Christoph Hellwig 提交于
Move ext4 headers out of include/linux. This is just the trivial move, there's some more thing that could be done later. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Jan Kara 提交于
The patch below makes ext4 update mtime and ctime of the directory into which we move file even if the directory entry already exists. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 17 4月, 2008 2 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Akinobu Mita 提交于
Check ext4_journal_get_write_access() errors. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Stephen Tweedie <sct@redhat.com> Cc: adilger@clusterfs.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mingming Cao <cmm@us.ibm.com>
-
- 29 4月, 2008 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
This patch enables extent-formatted normal symlinks. Using extents format allows a symlink to refer to a block number larger than 2^32 on large filesystems. We still don't enable extent format for fast symlinks, which are contained in the inode itself. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 26 2月, 2008 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
In addition, don't inherit EXT4_EXTENTS_FL from parent directory. If we have a directory with extent flag set and later mount the file system with -o noextents, the files created in that directory will also have extent flag set but we would not have called ext4_ext_tree_init for them. This will cause error later when we are verifying the extent header Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 16 2月, 2008 1 次提交
-
-
由 Theodore Ts'o 提交于
The ext4_dec_count() function is only needed when dropping the i_nlink count on inodes which are (or which could be) directories. If we *know* that the inode in question can't possibly be a directory, use drop_nlink or clear_nlink() if we know i_nlink is 1. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 22 2月, 2008 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
If ext4_mkdir() fails to allocate the initial block for the directory, don't leave behind a half-created directory inode with the link count left at one. This was caused by an inappropriate call to ext4_dec_count(). Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 08 2月, 2008 1 次提交
-
-
由 David Howells 提交于
Stop the EXT4 filesystem from using iget() and read_inode(). Replace ext4_read_inode() with ext4_iget(), and call that instead of iget(). ext4_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. ext4_fill_super() returns any error incurred when getting the root inode instead of EINVAL. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: N"Theodore Ts'o" <tytso@mit.edu> Acked-by: NJan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 2月, 2008 1 次提交
-
-
由 Valerie Clement 提交于
For fast symbolic links, the file content is stored in the i_block[] array, which is not compatible with the new file extents format. e2fsck reports error on such files because EXTENTS_FL is set. Don't set the EXTENTS_FL flag when creating fast symlinks. In the case of file migration, skip fast symbolic links. Signed-off-by: NValerie Clement <valerie.clement@bull.net> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 29 1月, 2008 3 次提交
-
-
由 Mariusz Kozlowski 提交于
The unused code found in ext3_find_entry() is also present (and still unused) in the ext4_find_entry() code. This patch removes it. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Aneesh Kumar K.V 提交于
This patch adds a new data type ext4_lblk_t to represent the logical file blocks. This is the preparatory patch to support large files in ext4 The follow up patch with convert the ext4_inode i_blocks to represent the number of blocks in file system block size. This changes makes it possible to have a block number 2**32 -1 which will result in overflow if the block number is represented by signed long. This patch convert all the block number to type ext4_lblk_t which is typedef to __u32 Also remove dead code ext4_ext_walk_space Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: NEric Sandeen <sandeen@redhat.com>
-
由 Jan Kara 提交于
With 64KB blocksize, a directory entry can have size 64KB which does not fit into 16 bits we have for entry lenght. So we store 0xffff instead and convert value when read from / written to disk. The patch also converts some places to use ext4_next_entry() when we are changing them anyway. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NMingming Cao <cmm@us.ibm.com>
-
- 18 10月, 2007 1 次提交
-
-
由 Eric Sandeen 提交于
CONFIG_EXT4_INDEX is not an exposed config option in the kernel, and it is unconditionally defined in ext4_fs.h. tune2fs is already able to turn off dir indexing, so at this point it's just cluttering up the code. Remove it. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 20 9月, 2007 2 次提交
-
-
由 Eric Sandeen 提交于
The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NAndreas Dilger <adilger@clusterfs.com> Tested-by: NJunjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
Convert asserts (BUGs) in dx_probe from bad on-disk data to recoverable errors with helpful warnings. With help catching other asserts from Duane Griffin <duaneg@dghda.com> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Acked-by: NDuane Griffin <duaneg@dghda.com> Acked-by: NTheodore Ts'o <tytso@mit.edu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2007 2 次提交
-
-
由 Andreas Dilger 提交于
This patch adds support to ext4 for allowing more than 65000 subdirectories. Currently the maximum number of subdirectories is capped at 32000. If we exceed 65000 subdirectories in an htree directory it sets the inode link count to 1 and no longer counts subdirectories. The directory link count is not actually used when determining if a directory is empty, as that only counts subdirectories and not regular files that might be in there. A EXT4_FEATURE_RO_COMPAT_DIR_NLINK flag has been added and it is set if the subdir count for any directory crosses 65000. A later fsck will clear EXT4_FEATURE_RO_COMPAT_DIR_NLINK if there are no longer any directory with >65000 subdirs. Signed-off-by: NAndreas Dilger <adilger@clusterfs.com> Signed-off-by: NKalpak Shah <kalpak@clusterfs.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Kalpak Shah 提交于
This patch adds nanosecond timestamps for ext4. This involves adding *time_extra fields to the ext4_inode to extend the timestamps to 64-bits. Creation time is also added by this patch. These extended fields will fit into an inode if the filesystem was formatted with large inodes (-I 256 or larger) and there are currently no EAs consuming all of the available space. For new inodes we always reserve enough space for the kernel's known extended fields, but for inodes created with an old kernel this might not have been the case. So this patch also adds the EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature flag(ro-compat so that older kernels can't create inodes with a smaller extra_isize). which indicates if the fields fitting inside s_min_extra_isize are available or not. If the expansion of inodes if unsuccessful then this feature will be disabled. This feature is only enabled if requested by the sysadmin. None of the extended inode fields is critical for correct filesystem operation. Signed-off-by: NAndreas Dilger <adilger@clusterfs.com> Signed-off-by: NKalpak Shah <kalpak@clusterfs.com> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 17 7月, 2007 1 次提交
-
-
由 Vasily Averin 提交于
After ext3 orphan list check has been added into ext3_destroy_inode() (please see my previous patch) the following situation has been detected: EXT3-fs warning (device sda6): ext3_unlink: Deleting nonexistent file (37901290), 0 Inode 00000101a15b7840: orphan list check failed! 00000773 6f665f00 74616d72 00000573 65725f00 06737270 66000000 616d726f ... Call Trace: [<ffffffff80211ea9>] ext3_destroy_inode+0x79/0x90 [<ffffffff801a2b16>] sys_unlink+0x126/0x1a0 [<ffffffff80111479>] error_exit+0x0/0x81 [<ffffffff80110aba>] system_call+0x7e/0x83 First messages said that unlinked inode has i_nlink=0, then ext3_unlink() adds this inode into orphan list. Second message means that this inode has not been removed from orphan list. Inode dump has showed that i_fop = &bad_file_ops and it can be set in make_bad_inode() only. Then I've found that ext3_read_inode() can call make_bad_inode() without any error/warning messages, for example in the following case: ... if (inode->i_nlink == 0) { if (inode->i_mode == 0 || !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ORPHAN_FS)) { /* this inode is deleted */ brelse (bh); goto bad_inode; ... Bad inode can live some time, ext3_unlink can add it to orphan list, but ext3_delete_inode() do not deleted this inode from orphan list. As result we can have orphan list corruption detected in ext3_destroy_inode(). However it is not clear for me how to fix this issue correctly. As far as i see is_bad_inode() is called after iget() in all places excluding ext3_lookup() and ext3_get_parent(). I believe it makes sense to add bad inode check to these functions too and call iput if bad inode detected. Signed-off-by: NVasily Averin <vvs@sw.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 6月, 2007 1 次提交
-
-
由 Dave Kleikamp 提交于
Replace a lot of spaces with tabs Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 09 5月, 2007 2 次提交
-
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitriy Monakhov 提交于
- ext3_dx_find_entry() exit with out setting proper error pointer - do_split() exit with out setting proper error pointer it is realy painful because many callers contain folowing code: de = do_split(handle,dir, &bh, frame, &hinfo, &retval); if (!(de)) return retval; <<< WOW retval wasn't changed by do_split(), so caller failed <<< but return SUCCESS :) - Rearrange do_split() error path. Current error path is realy ugly, all this up and down jump stuff doesn't make code easy to understand. [dmonakhov@sw.ru: fix annoying fake error messages] Signed-off-by: NMonakhov Dmitriy <dmonakhov@openvz.org> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NMonakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 2月, 2007 2 次提交
-
-
由 Eric Sandeen 提交于
- Naming is confusing, ext3_inc_count manipulates i_nlink not i_count - handle argument passed in is not used - ext3 and ext4 already call inc_nlink and dec_nlink directly in other places Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
Return -ENOENT from ext[34]_link if we've raced with unlink and i_nlink is 0. Doing otherwise has the potential to corrupt the orphan inode list, because we'd wind up with an inode with a non-zero link count on the list, and it will never get properly cleaned up & removed from the orphan list before it is freed. [akpm@osdl.org: build fix] Signed-off-by: NEric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-