Fix possible incorrect link speed provision following rapid link speed change.
Clear link speed mask after each link change, and not only after link down.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NBarak Witkowski <barak@broadcom.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several KR registers were not set correctly back to default after
loopback test, so set those global registers over the global WC lane (zero)
rather than the current lane.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NBarak Witkowski <barak@broadcom.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of link flap avoidance between PXE boot and bnx2x, set the appropriate
PHY DEVAD even if LFA kicks in.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NBarak Witkowski <barak@broadcom.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix 1G KR link by restoring CL72 misc control register to default value rather
than 0.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NBarak Witkowski <barak@broadcom.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch corrects the ethtool get_ts_info functon which did not state that
software timestamping was supported, even though it is.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
CC: Stable <stable@vger.kernel.org> [3.5]
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
This is a batch of fixes intended for 3.7...

The biggest portion of this is a pull request from Johannes Berg:

"Please pull my mac80211.git tree per below to get a number of fixes. I
have included a patch from Antonio to fix a memcpy overrun, Felix's
patches for the antenna gain/tx power issues, a few mesh-related fixes
from Javier for mac80211 and my own patches to not access data that
might not be present in an skb at all as well as a patch (the duplicate
IE check one) to make mac80211 forward-compatible with potential future
spec extensions that use the same IE multiple times.

It's a bit bigger than I'd like maybe, but I think all of these are
worthwhile fixes at this point."

In addition...

Felix Fietkau fixes an ath9k use-after-free issue.

Stanislaw Gruszka adds a valid value check to rt2800.

Sven Eckelmann adds a check to only check a TID value in a BlockAck, for
frames that could be either a BlockAck or a normal Ack.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains fixes for your net tree, two of them
are due to relatively recent changes, one has been a longstanding bug,
they are:

* Fix incorrect usage of rt_gateway in the H.323 helper, from
  Julian Anastasov.

* Skip re-route in nf_nat code for ICMP traffic. If CONFIG_XFRM is
  enabled, we waste cycles to look up for the route again. This problem
  seems to be there since really long time. From Ulrich Weber.

* Fix mismatching section in nf_conntrack_reasm, from Hein Tibosch.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VXLAN confused flag versus bitmap on state.
Based on part of a earlier patch by David Stevens.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case
only one frame is currently available. The client will then answer using a
normal Ack instead of a BlockAck. This acknowledgement has no TID stored and
therefore the hardware is not able to provide us the corresponding TID.

The TID set by the hardware in the tx status descriptor has to be seen as
undefined and not as a valid TID value for normal acknowledgements. Doing
otherwise results in a massive amount of retransmissions and stalls of
connections.

Users may experience low bandwidth and complete connection stalls in
environments with transfers using multiple TIDs.

This regression was introduced in b11b160d
("ath9k: validate the TID in the tx status information").
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: stable@vger.kernel.org
Acked-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the
EEPROM, but step is equal to 0xff. This results on ridiculous delta
calculations and completely broke TX power settings.
Reported-and-tested-by: NPavel Lucik <pavel.lucik@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

bf->bf_next is only while buffers are chained as part of an A-MPDU
in the tx queue. When a tid queue is flushed (e.g. on tearing down
an aggregation session), frames can be enqueued again as normal
transmission, without bf_next being cleared. This can lead to the
old pointer being dereferenced again later.

This patch might fix crashes and "Failed to stop TX DMA!" messages.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

WARNING: net/ipv6/netfilter/nf_defrag_ipv6.o(.text+0xe0): Section mismatch in
reference from the function nf_ct_net_init() to the function
.init.text:nf_ct_frag6_sysctl_register()
The function nf_ct_net_init() references the function
__init nf_ct_frag6_sysctl_register().

In case nf_conntrack_ipv6 is compiled as a module, nf_ct_net_init could be
called after the init code and data are unloaded. Therefore remove the
"__net_init" annotation from nf_ct_frag6_sysctl_register().
Signed-off-by: NHein Tibosch <hein_tibosch@yahoo.es>
Acked-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

ICMP tuples have id in src and type/code in dst.
So comparing src.u.all with dst.u.all will always fail here
and ip_xfrm_me_harder() is called for every ICMP packet,
even if there was no NAT.
Signed-off-by: NUlrich Weber <ulrich.weber@sophos.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Pull networking fixes from David Miller:
 "This is what we usually expect at this stage of the game, lots of
  little things, mostly in drivers.  With the occasional 'oops didn't
  mean to do that' kind of regressions in the core code."

 1) Uninitialized data in __ip_vs_get_timeouts(), from Arnd Bergmann

 2) Reject invalid ACK sequences in Fast Open sockets, from Jerry Chu.

 3) Lost error code on return from _rtl_usb_receive(), from Christian
    Lamparter.

 4) Fix reset resume on USB rt2x00, from Stanislaw Gruszka.

 5) Release resources on error in pch_gbe driver, from Veaceslav Falico.

 6) Default hop limit not set correctly in ip6_template_metrics[], fix
    from Li RongQing.

 7) Gianfar PTP code requests wrong kind of resource during probe, fix
    from Wei Yang.

 8) Fix VHOST net driver on big-endian, from Michael S Tsirkin.

 9) Mallenox driver bug fixes from Jack Morgenstein, Or Gerlitz, Moni
    Shoua, Dotan Barak, and Uri Habusha.

10) usbnet leaks memory on TX path, fix from Hemant Kumar.

11) Use socket state test, rather than presence of FIN bit packet, to
    determine FIONREAD/SIOCINQ value.  Fix from Eric Dumazet.

12) Fix cxgb4 build failure, from Vipul Pandya.

13) Provide a SYN_DATA_ACKED state to complement SYN_FASTOPEN in socket
    info dumps.  From Yuchung Cheng.

14) Fix leak of security path in kfree_skb_partial().  Fix from Eric
    Dumazet.

15) Handle RX FIFO overflows more resiliently in pch_gbe driver, from
    Veaceslav Falico.

16) Fix MAINTAINERS file pattern for networking drivers, from Jean
    Delvare.

17) Add iPhone5 IDs to IPHETH driver, from Jay Purohit.

18) VLAN device type change restriction is too strict, and should not
    trigger for the automatically generated vlan0 device.  Fix from Jiri
    Pirko.

19) Make PMTU/redirect flushing work properly again in ipv4, from
    Steffen Klassert.

20) Fix memory corruptions by using kfree_rcu() in netlink_release().
    From Eric Dumazet.

21) More qmi_wwan device IDs, from Bjørn Mork.

22) Fix unintentional change of SNAT/DNAT hooks in generic NAT
    infrastructure, from Elison Niven.

23) Fix 3.6.x regression in xt_TEE netfilter module, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
  tilegx: fix some issues in the SW TSO support
  qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan
  net: usb: Fix memory leak on Tx data path
  net/mlx4_core: Unmap UAR also in the case of error flow
  net/mlx4_en: Don't use vlan tag value as an indication for vlan presence
  net/mlx4_en: Fix double-release-range in tx-rings
  bas_gigaset: fix pre_reset handling
  vhost: fix mergeable bufs on BE hosts
  gianfar_ptp: use iomem, not ioports resource tree in probe
  ipv6: Set default hoplimit as zero.
  NET_VENDOR_TI: make available for am33xx as well
  pch_gbe: fix error handling in pch_gbe_up()
  b43: Fix oops on unload when firmware not found
  mwifiex: clean up scan state on error
  mwifiex: return -EBUSY if specific scan request cannot be honored
  brcmfmac: fix potential NULL dereference
  Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"
  ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation
  rt2x00: usb: fix reset resume
  rtlwifi: pass rx setup error code to caller
  ...

Pull slave-dmaengine fixes from Vinod Koul:
 "Three fixes for slave dmanegine.

  Two are for typo omissions in sifr dmaengine driver and the last one
  is for the imx driver fixing a missing unlock"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: sirf: fix a typo in moving running dma_desc to active queue
  dmaengine: sirf: fix a typo in dma_prep_interleaved
  dmaengine: imx-dma: fix missing unlock on error in imxdma_xfer_desc()

Pull power management and ACPI fixes from Rafael J Wysocki:

 - Fix for a memory leak in acpi_bind_one() from Jesper Juhl.

 - Fix for an error code path memory leak in pm_genpd_attach_cpuidle()
   from Jonghwan Choi.

 - Fix for smp_processor_id() usage in preemptible code in powernow-k8
   from Andreas Herrmann.

 - Fix for a suspend-related memory leak in cpufreq stats from Xiaobing
   Tu.

 - Freezer fix for failure to clear PF_NOFREEZE along with PF_KTHREAD in
   flush_old_exec() from Oleg Nesterov.

 - acpi_processor_notify() fix from Alan Cox.

* tag 'pm+acpi-for-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: missing break
  freezer: exec should clear PF_NOFREEZE along with PF_KTHREAD
  Fix memory leak in cpufreq stats.
  cpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible code
  PM / Domains: Fix memory leak on error path in pm_genpd_attach_cpuidle
  ACPI: Fix memory leak in acpi_bind_one()

The code to allow EAPOL frames even when the station
isn't yet marked associated needs to check that the
incoming frame is long enough and due to paged RX it
also can't assume skb->data contains the right data,
it must use skb_copy_bits(). Fix this to avoid using
data that doesn't really exist.

Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

A number of places in the mesh code don't check that
the frame data is present and in the skb header when
trying to access. Add those checks and the necessary
pskb_may_pull() calls. This prevents accessing data
that doesn't actually exist.

To do this, export ieee80211_get_mesh_hdrlen() to be
able to use it in mac80211.

Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Due to pskb_may_pull() checking the skb length, all
non-management frames are checked on input whether
their 802.11 header is fully present. Also add that
check for management frames and remove a check that
is now duplicate. This prevents accessing skb data
beyond the frame end.

Cc: stable@vger.kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The mesh header can have address extension by a 4th
or a 5th and 6th address, but never both. Drop such
frames in 802.11 -> 802.3 conversion along with any
frames that have the wrong extension.

Cc: stable@vger.kernel.org
Reviewed-by: NJavier Cardona <javier@cozybit.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The 'ssid' field of the cfg80211_ibss_params is a u8 pointer and
its length is likely to be less than IEEE80211_MAX_SSID_LEN most
of the time.

This patch fixes the ssid copy in ieee80211_ibss_join() by using
the SSID length to prevent it from reading beyond the string.

Cc: stable@vger.kernel.org
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
[rewrapped commit message, small rewording]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Pull infiniband fixes from Roland Dreier:
 "Small batch of fixes for 3.7:
   - Fix crash in error path in cxgb4
   - Fix build error on 32 bits in mlx4
   - Fix SR-IOV bugs in mlx4"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() fails
  mlx4_core: Remove annoying debug messages from SR-IOV flow
  RDMA/cxgb4: Don't free chunk that we have failed to allocate
  IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualization
  IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF)
  IB/mlx4: Fix build error on platforms where UL is not 64 bits

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a bunch of USB fixes for the 3.7-rc tree.

  There's a lot of small USB serial driver fixes, and one larger one
  (the mos7840 driver changes are mostly just moving code around to fix
  problems.) Thanks to Johan Hovold for finding the problems and fixing
  them all up.

  Other than those, there is the usual new device ids, xhci bugfixes,
  and gadget driver fixes, nothing out of the ordinary.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (49 commits)
  xhci: trivial: Remove assigned but unused ep_ctx.
  xhci: trivial: Remove assigned but unused slot_ctx.
  xhci: Fix missing break in xhci_evaluate_context_result.
  xhci: Fix potential NULL ptr deref in command cancellation.
  ehci: Add yet-another Lucid nohandoff pci quirk
  ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions
  USB: mos7840: fix port_probe flow
  USB: mos7840: fix port-data memory leak
  USB: mos7840: remove invalid disconnect handling
  USB: mos7840: remove NULL-urb submission
  USB: qcserial: fix interface-data memory leak in error path
  USB: option: fix interface-data memory leak in error path
  USB: ipw: fix interface-data memory leak in error path
  USB: mos7840: fix port-device leak in error path
  USB: mos7840: fix urb leak at release
  USB: sierra: fix port-data memory leak
  USB: sierra: fix memory leak in probe error path
  USB: sierra: fix memory leak in attach error path
  USB: usb-wwan: fix multiple memory leaks in error paths
  USB: keyspan: fix NULL-pointer dereferences and memory leaks
  ...

Pull serial fix from Greg Kroah-Hartman:
 "Here is one patch, a revert of a omap serial driver patch that was
  causing problems, for your 3.7-rc tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: omap: fix software flow control"

Pull staging driver fixes from Greg Kroah-Hartman:
 "Here are some staging driver fixes for your 3.7-rc tree.

  Nothing major here, a number of iio driver fixups that were causing
  problems, some comedi driver bugfixes, and a bunch of tidspbridge
  warning squashing and other regressions fixed from the 3.6 release.

  All have been in the linux-next releases for a bit.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (32 commits)
  staging: tidspbridge: delete unused mmu functions
  staging: tidspbridge: ioremap physical address of the stack segment in shm
  staging: tidspbridge: ioremap dsp sync addr
  staging: tidspbridge: change type to __iomem for per and core addresses
  staging: tidspbridge: drop const from custom mmu implementation
  staging: tidspbridge: request the right irq for mmu
  staging: ipack: add missing include (implicit declaration of function 'kfree')
  staging: ramster: depends on NET
  staging: omapdrm: fix allocation size for page addresses array
  staging: zram: Fix handling of incompressible pages
  Staging: android: binder: Allow using highmem for binder buffers
  Staging: android: binder: Fix memory leak on thread/process exit
  staging: comedi: ni_labpc: fix possible NULL deref during detach
  staging: comedi: das08: fix possible NULL deref during detach
  staging: comedi: amplc_pc263: fix possible NULL deref during detach
  staging: comedi: amplc_pc236: fix possible NULL deref during detach
  staging: comedi: amplc_pc236: fix invalid register access during detach
  staging: comedi: amplc_dio200: fix possible NULL deref during detach
  staging: comedi: 8255_pci: fix possible NULL deref during detach
  staging: comedi: ni_daq_700: fix dio subdevice regression
  ...

Pull driver core fixes from Greg Kroah-Hartman:
 "Here are a number of firmware core fixes for 3.7, and some other minor
  fixes.  And some documentation updates thrown in for good measure.

  All have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation:Chinese translation of Documentation/arm64/memory.txt
  Documentation:Chinese translation of Documentation/arm64/booting.txt
  Documentation:Chinese translation of Documentation/IRQ.txt
  firmware loader: document kernel direct loading
  sysfs: sysfs_pathname/sysfs_add_one: Use strlcat() instead of strcat()
  dynamic_debug: Remove unnecessary __used
  firmware loader: sync firmware cache by async_synchronize_full_domain
  firmware loader: let direct loading back on 'firmware_buf'
  firmware loader: fix one reqeust_firmware race
  firmware loader: cancel uncache work before caching firmware

Pull char/misc driver fixes from Greg Kroah-Hartman:
 "Here are some driver fixes for 3.7.  They include extcon driver fixes,
  a hyper-v bugfix, and two other minor driver fixes.

  All of these have been in the linux-next releases for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  sonypi: suspend/resume callbacks should be conditionally compiled on CONFIG_PM_SLEEP
  Drivers: hv: Cleanup error handling in vmbus_open()
  extcon : register for cable interest by cable name
  extcon: trivial: kfree missed from remove path
  extcon: driver model release call not needed
  extcon: MAX77693: Add platform data for MUIC device to initialize registers
  extcon: max77693: Use max77693_update_reg for rmw operations
  extcon: Fix kerneldoc for extcon_set_cable_state and extcon_set_cable_state_
  extcon: adc-jack: Add missing MODULE_LICENSE
  extcon: adc-jack: Fix checking return value of request_any_context_irq
  extcon: Fix return value in extcon_register_interest()
  extcon: unregister compat link on cleanup
  extcon: Unregister compat class at module unload to fix oops
  extcon: optimising the check_mutually_exclusive function
  extcon: standard cable names definition and declaration changed
  extcon-max8997: remove usage of ret in max8997_muic_handle_charger_type_detach
  extcon: Remove duplicate inclusion of extcon.h header file

In commit 800179c9 ("This adds symlink and hardlink restrictions to
the Linux VFS"), the new link protections were enabled by default, in
the hope that no actual application would care, despite it being
technically against legacy UNIX (and documented POSIX) behavior.

However, it does turn out to break some applications.  It's rare, and
it's unfortunate, but it's unacceptable to break existing systems, so
we'll have to default to legacy behavior.

In particular, it has broken the way AFD distributes files, see

  http://www.dwd.de/AFD/

along with some legacy scripts.

Distributions can end up setting this at initrd time or in system
scripts: if you have security problems due to link attacks during your
early boot sequence, you have bigger problems than some kernel sysctl
setting. Do:

	echo 1 > /proc/sys/fs/protected_symlinks
	echo 1 > /proc/sys/fs/protected_hardlinks

to re-enable the link protections.

Alternatively, we may at some point introduce a kernel config option
that sets these kinds of "more secure but not traditional" behavioural
options automatically.
Reported-by: NNick Bowler <nbowler@elliptictech.com>
Reported-by: NHolger Kiehl <Holger.Kiehl@dwd.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # v3.6
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "Slightly a high amount of commits come from Adrian Knoth's HDSPM
  driver fixes.  Other than that, all small trival fixes or quirks that
  are pretty driver-specific."

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Only enable extra BCLK cycles when required
  ALSA: als3000: check for the kzalloc return value
  ALSA: sound/isa/opti9xx/miro.c: eliminate possible double free
  ALSA: hda - Fix silent headphone output from Toshiba P200
  ALSA: hdspm - Fix coding style in CTL_ELEM macros
  ALSA: hdspm - Fix typo in kcontrol element on RME MADI cards
  ALSA: hdspm - Fix sync_in detection on AES/AES32
  ALSA: hdspm - Fix sync_in reporting on RME MADI cards
  ALSA: hdspm - Also report autosync_sample_rate on MADI and MADIface
  ALSA: hdspm - Fix reported autosync_sample_rate
  ALSA: hdspm - Fix sync check reporting on all RME HDSPM cards
  ALSA: hdspm - Report external rate in slave mode on PCI MADI
  ALSA: hdspm - Allow DDS/Varispeed to be set from userspace
  ALSA: hda - add dock support for Thinkpad T430
  ASoC: ux500_msp_i2s: Fix devm_* and return code merge error
  ASoC: Ux500: Dispose of device nodes correctly

Pull DMA-mapping revert from Marek Szyprowski:
 "Due to my mistake, my previous pull request (merged as commit
  cff7b8ba: "Merge branch 'fixes_for_linus' ..") contained a patch
  which is aimed for v3.8 and lacks its dependences.  This pull request
  reverts it and fixes build break of ARM architecture."

* 'fixes_for_linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  Revert "ARM: dma-mapping: support debug_dma_mapping_error"

Pull x86 fixes from Ingo Molnar:
 "This fixes a couple of nasty page table initialization bugs which were
  causing kdump regressions.  A clean rearchitecturing of the code is in
  the works - meanwhile these are reverts that restore the
  best-known-working state of the kernel.

  There's also EFI fixes and other small fixes."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, mm: Undo incorrect revert in arch/x86/mm/init.c
  x86: efi: Turn off efi_enabled after setup on mixed fw/kernel
  x86, mm: Find_early_table_space based on ranges that are actually being mapped
  x86, mm: Use memblock memory loop instead of e820_RAM
  x86, mm: Trim memory in memblock to be page aligned
  x86/irq/ioapic: Check for valid irq_cfg pointer in smp_irq_move_cleanup_interrupt
  x86/efi: Fix oops caused by incorrect set_memory_uc() usage
  x86-64: Fix page table accounting
  Revert "x86/mm: Fix the size calculation of mapping tables"
  MAINTAINERS: Add EFI git repository location

Pull perf fixes from Ingo Molnar:
 "Most of the kernel diffstat relates to a group of Intel P6 and KNC
  (Xeon-Phi Knights Corner) PMU driver fixes, neither of which is in
  heavy use, so we took the fixes.

  The rest is diverse smallish fixes to the tooling and kernel side."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Remove unused variable in nhmex_rbox_alter_er()
  perf/x86: Enable overflow on Intel KNC with a custom knc_pmu_handle_irq()
  perf/x86: Remove cpuc->enable check on Intl KNC event enable/disable
  perf/x86: Make Intel KNC use full 40-bit width of counters
  perf/x86/uncore: Handle pci_read_config_dword() errors
  perf/x86: Remove P6 cpuc->enabled check
  perf/x86: Update/fix generic events on P6 PMU
  perf/x86: Fix P6 FP_ASSIST event constraint
  perf, cpu hotplug: Use cached value of smp_processor_id()
  perf, cpu hotplug: Run CPU_STARTING notifiers with irqs disabled
  x86/perf: Fix virtualization sanity check
  perf test: Fix exclude_guest parse events tests
  perf tools: do not flush maps on COMM for perf report
  perf help: Fix --help for builtins
  perf trace: Check if sample raw_data field is set
  perf trace: Validate syscall id before growing syscall table

Pull btrfs fixes from Chris Mason:
 "This has our series of fixes for the next rc.  The biggest batch is
  from Jan Schmidt, fixing up some problems in our subvolume quota code
  and fixing btrfs send/receive to work with the new extended inode
  refs."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: do not bug when we fail to commit the transaction
  Btrfs: fix memory leak when cloning root's node
  Btrfs: Use btrfs_update_inode_fallback when creating a snapshot
  Btrfs: Send: preserve ownership (uid and gid) also for symlinks.
  Btrfs: fix deadlock caused by the nested chunk allocation
  btrfs: Return EINVAL when length to trim is less than FSB
  Btrfs: fix memory leak in btrfs_quota_enable()
  Btrfs: send correct rdev and mode in btrfs-send
  Btrfs: extended inode refs support for send mechanism
  Btrfs: Fix wrong error handling code
  Fix a sign bug causing invalid memory access in the ino_paths ioctl.
  Btrfs: comment for loop in tree_mod_log_insert_move
  Btrfs: fix extent buffer reference for tree mod log roots
  Btrfs: determine level of old roots
  Btrfs: tree mod log's old roots could still be part of the tree
  Btrfs: fix a tree mod logging issue for root replacement operations
  Btrfs: don't put removals from push_node_left into tree mod log twice

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Merge tag 'efi-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent

Pull EFI fixes from Matt Fleming:

 "Fix oops with EFI variables on mixed 32/64-bit firmware/kernels and
  document EFI git repository location on kernel.org."

Conflicts:
	arch/x86/include/asm/efi.h
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This change correctly computes the header length and data length in
the fragments to avoid a bug where we would end up with extremely
slow performance.  Also adopt use of skb_frag_size() accessor.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: stable@vger.kernel.org [v3.6]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These devices provide QMI and ethernet functionality via a standard CDC
ethernet descriptor.  But when driven by cdc_ether, the QMI
functionality is unavailable because only cdc_ether can claim the USB
interface.  Thus blacklist the devices in cdc_ether and add their IDs to
qmi_wwan, which enables both QMI and ethernet simultaneously.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver anchors the tx urbs and defers the urb submission if
a transmit request comes when the interface is suspended.
Anchoring urb increments the urb reference count. These
deferred urbs are later accessed by calling usb_get_from_anchor()
for submission during interface resume. usb_get_from_anchor()
unanchors the urb but urb reference count remains same.
This causes the urb reference count to remain non-zero
after usb_free_urb() gets called and urb never gets freed.
Hence call usb_put_urb() after anchoring the urb to properly
balance the reference count for these deferred urbs. Also,
unanchor these deferred urbs during disconnect, to free them
up.
Signed-off-by: NHemant Kumar <hemantk@codeaurora.org>
Acked-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>