Add the USB ID for Terratec Cinergy S2 Rev.3 (0ccd:0102).

Curiously dvb-usb-ids included already the USB ID for TERRATEC_CINERGY_S2_R3 even if the device was not supported.
Reported-by: NChristian Knippel <namerp@googlemail.com>
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The DW2102 DVB-S/S2 driver uses the info() logging function from
dvb-usb.h. This function already appends a newline to the provided log
message, causing the dmesg output from DW2102 to include blank lines.
Fix this by removing the newline in the calls to info().
Signed-off-by: NJonathan McDowell <noodles@earth.li>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Right now, dw2102 assumes that the USB IDs will be either at
an external header or defined internally. That doesn't sound
right.

So, let's move the definitions to just one place.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On the particular case when the product id is 0x2101 we have requested
for a firmware but after processing it we missed releasing it.
Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

TeVii S662 is a USB 2.0 DVB-S2 tuner that's identical to TechnoTrend
S2-4600 tuner. Add the USB ID to dw2102 driver.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

ts2020.h was already included a few lines earlier. Remove the unnecessary entry.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Convert the TT S2-4600 USB tuner to use the I2C binding for attaching
the demodulator instead of the old m88ds3103_attach method.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The Terratec Cinergy S2 USB BOX uses a Montage M88TS2022 tuner
and a M88DS3103 demodulator, same as Technotrend TT-connect S2-4600.
This patch adds the missing USB Product ID to make it work.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that this was defined at usb-id.h, update the values for
USB_PID_TERRATEC_CINERGY_S2_R1 and USB_PID_TERRATEC_CINERGY_S2_R2.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVB API was originally defined using typedefs. This is against
Kernel CodingStyle, and there's no good usage here. While we can't
remove its usage on userspace, we can avoid its usage in Kernelspace.

So, let's do it.

This patch was generated by this shell script:

	for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done

While here, make CodingStyle fixes on the affected lines.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*

If the streaming_ctrl is called to enable TS before demod has locked
the TS will be empty. Copied the solution from the dvbsky driver for the
TechnoTrend S2-4600 device: when the state changes from unlock to
lock, call su3000_streaming_ctrl again.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

While reading the MAC address for SU3000-based devices the system was
printing excessive debug information in the logs:

Output before the patch:

[ 1515.780692] bc 00 00 00 00 00
[ 1515.781440] bc ea 00 00 00 00
[ 1515.782251] bc ea 2b 00 00 00
[ 1515.783094] bc ea 2b 46 00 00
[ 1515.783816] bc ea 2b 46 12 00
[ 1515.784565] bc ea 2b 46 12 92
[ 1515.784571] dvb-usb: MAC address: bc:ea:2b:46:12:92

Output after the patch:

[ 3803.495706] dvb-usb: MAC address: bc:ea:2b:46:12:92
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

TeVii S482 is a PCIe device with two tuners that actually contains two
USB devices. The devices are visible in the lsusb printout.

Bus 006 Device 002: ID 9022:d483 TeVii Technology Ltd.
Bus 007 Device 002: ID 9022:d484 TeVii Technology Ltd.

The device itself works exactly with the same settings as TechnoTrend
TT-connect S2-4600. Firmware for DS3103 demodulator is required:
http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/

This patch should be applied on top of the TT S2-4600 patch:
https://patchwork.linuxtv.org/patch/28818/Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/dvb-usb/dw2102.c:440 dw2104_i2c_transfer() warn: inconsistent indenting
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Change ts2022 driver to ts2020 driver. ts2020 driver supports
both tuner chip models.

That affects TechnoTrend TT-connect S2-4600 DVB-S/S2 device, which
Olli just added.

Cc: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

TechnoTrend TT-connect S2-4600 is a USB2.0 DVB-S/S2 tuner using the popular
Montage M88DS3103/M88TS2022 demod/tuner.

The demodulator needs a firmware. Antti posted a firmware when releasing
support for PCTV 461e, available here:
http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Prepare the dw2102 driver for tuner drivers that are implemented as I2C
drivers (such as m88ts2022). The I2C client is stored in to the state
and released at disconnect.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Two separate state structs are defined for different devices inside the
dw2102. Combine them, as both only contain one element.

This will also make it easier to further cleanup the driver.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/dvb-usb/dw2102.c:670:65: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1601:32: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1644:40: warning: restricted __le16 degrades to integer
drivers/media/usb/dvb-usb/dw2102.c:1904:34: warning: symbol 'p1100' was not declared. Should it be static?
drivers/media/usb/dvb-usb/dw2102.c:1911:34: warning: symbol 's660' was not declared. Should it be static?
drivers/media/usb/dvb-usb/dw2102.c:1930:34: warning: symbol 'p7500' was not declared. Should it be static?
drivers/media/usb/dvb-usb/dw2102.c:1937:34: warning: symbol 's421' was not declared. Should it be static?
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Right now the protocol information is not preserved, rc-core gets handed a
scancode but has no idea which protocol it corresponds to.

This patch (which required reading through the source/keymap for all drivers,
not fun) makes the protocol information explicit which is important
documentation and makes it easier to e.g. support multiple protocols with one
decoder (think rc5 and rc-streamzap). The information isn't used yet so there
should be no functional changes.

[m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing]
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Geniatech T220 init fixed - reset cmd from windows driver and fixed TS bus config for cxd2820r.
Signed-off-by: NEvgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

We recently introduced some new error paths but the unlocks are missing.
Fixes: 0065a79a ('[media] dw2102: Don't use dynamic static allocation')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Use RC Core instead of the legacy RC.
DVBWorld, TBS, TeVii, Prof hardware decode only NEC remotes (one byte code).
Geniatech hardware decode only RC5 (two bytes).
+ New keymap for Geniatech HDStar (SU3000).
Signed-off-by: NEvgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Support for Geniatech T220 DVB-T/T2/C USB stick.
Signed-off-by: NEvgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
	drivers/media/usb/dvb-usb/dw2102.c:368:1: warning: 'dw2102_earda_i2c_transfer' uses dynamic stack allocation [enabled by default]
	drivers/media/usb/dvb-usb/dw2102.c:449:1: warning: 'dw2104_i2c_transfer' uses dynamic stack allocation [enabled by default]
	drivers/media/usb/dvb-usb/dw2102.c:512:1: warning: 'dw3101_i2c_transfer' uses dynamic stack allocation [enabled by default]
	drivers/media/usb/dvb-usb/dw2102.c:621:1: warning: 's6x0_i2c_transfer' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer to be the max size of
a control URB payload data (64 bytes).
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

[media] media: dvb-frontends: ts2020: Added in a option for frequency divider value for s600 devices

When the tuner part of the ds3000 driver was split to share code with the m88rs2000 driver, the ts2020 driver used
the frequency divider value from the m88rs2000 driver.  However the ds3000 driver requires a different value, and this
resulted in some frequecies being invisible to the tuner.  This patch adds back in the value needed for the ds3000 driver
and configured as an option in the dw2102 frontend driver.
It may also apply to su3000 devices, which use the same ds3000 driver, but for now it is only applied to the s660 device.
Signed-off-by: NJohn Horan <knasher@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

ts2020.h was included twice.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Added support for the GOTVIEW SatelliteHD card which is based on
Montage M88DS3000 and works very well with this driver.
Signed-off-by: NAndrey Pavlenko <andrey.a.pavlenko@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Terratec Cinergy S2 USB HD Rev.2 support.
This commit is a corrected cherry-pick of 03228792 which got reverted in
b7e38636 because it was rebased incorrectly and introduced compilation
errors.
Signed-off-by: NStephan Hilb <stephan@ecshi.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Tuner part of Montage rs2000 chip is similar to ts2020 tuner.
Patch to use ts2020 code.

[mchehab@redhat.com: a few CodingStyle fixes]
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

TeVii s660 and others have LED for lock indication.
Let's use it in right order.
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

DVB-S chip is Montage m88rs2000, so initial patch is simple.
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

make the other drivers take use of the separate ts2020 driver
Signed-off-by: NKonstantin Dimitrov <kosio.dimitrov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NRémi Cardona <remi.cardona@smartjog.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As media/dvb will be removed, move it to a proper place.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This reverts commit 03228792.

drivers/media/dvb/dvb-usb/dw2102.c:1478:18: error: ‘USB_PID_TEVII_S421’ undeclared here (not in a function)
drivers/media/dvb/dvb-usb/dw2102.c:1479:18: error: ‘USB_PID_TEVII_S632’ undeclared here (not in a function)
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Terratec Cinergy S2 USB HD Rev.2 support.
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

media_build/v4l/dw2102.c:151:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
media_build/v4l/dw2102.c:224:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
media_build/v4l/dw2102.c:279:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
media_build/v4l/dw2102.c:352:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
media_build/v4l/dw2102.c:435:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
media_build/v4l/dw2102.c:499:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

dw2102_properties et al refer to entries in the USB-id table using
hard-coded indices, as in "&dw2102_table[6]", which means adding new
entries before the end of the list has the potential to introduce bugs
in code elsewhere in the file.

Use C99-style initializers with symbolic names for each index to avoid
this.  This way, other device tables wanting to reuse the USB ids can
use expressions like "&dw2102_table[TEVII_S630]" that do not change as
the entries in the table are reordered.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>