select NEW_LEDS for now until the Kconfig dependencies have been
fixed.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

commit e26a28d1
    x86: olpc build fix

was a fix to a patch that was withdrawn/delayed and then erroneously
commited to x86.git. Revert it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

add the HAVE_UNSTABLE_SCHED_CLOCK, for architectures to select.

the next change utilizes it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

CONFIG_OLPC needs to depend on MGEODE_LX
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Daniel Drake <dsd@gentoo.org> reported:

In 2.6.23, if you unpacked a kernel source tarball and then
ran "make menuconfig" you'd be presented with this message:
    # using defaults found in arch/i386/defconfig

and the default options would be set.

The same thing in 2.6.24 does not give you any "using defaults" message, and
the default config options within menuconfig are rather blank (e.g. no PCI
support). You can work around this by explicitly running "make defconfig"
before menuconfig, but it would be nice to have the behaviour the way it was
for 2.6.23 (and the way it still is for other archs).

Fixed by adding a x86 specific defconfig list to Kconfig.

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10470
Tested-by: dsd@gentoo.org
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

the 'reboot_force' flag is a notion that non-PC subarchitectures do
not have.

also, unify the X86_BIOS_REBOOT option between 32-bit and 64-bit
and get rid of a few unnecessary Kconfig and Makefile complications
that way.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This adds support for OLPC XO hardware.  Open Firmware on XOs don't contain
the VSA, so it is necessary to emulate the PCI BARs in the kernel.  This also
adds functionality for running EC commands, and a CONFIG_OLPC.

A number of OLPC drivers depend upon CONFIG_OLPC.

olpc_ec_timeout is a hack to work around Embedded Controller bugs.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: geode_has_vsa build fix]
[akpm@linux-foundation.org: olpc_register_battery_callback doesn't exist]
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

iommu_is_span_boundary in lib/iommu-helper.c was exported for PARISC IOMMUs
(commit 3715863a).  SWIOTLB can use it instead
of the homegrown function.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Turn CONFIG_DMI into a selectable option if EMBEDDED is defined, in
order to be able to remove the DMI table scanning code if it's not
needed, and then reduce the kernel code size.

With CONFIG_DMI (i.e before) :

   text    data     bss     dec     hex filename
1076076  128656   98304 1303036  13e1fc vmlinux

Without CONFIG_DMI (i.e after) :

   text    data     bss     dec     hex filename
1068092  126308   98304 1292704  13b9a0 vmlinux

Result:

   text    data     bss     dec     hex filename
  -7984   -2348       0  -10332   -285c vmlinux

The new option appears in "Processor type and features", only when
CONFIG_EMBEDDED is defined.

This patch is part of the Linux Tiny project, and is based on previous work
done by Matt Mackall <mpm@selenic.com>.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Anvin" <hpa@zytor.com>
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Not all architectures define cache_line_size() so as suggested by Andrew move
the private implementations in mm/slab.c and mm/slob.c to <linux/cache.h>.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add basic KVM paravirt support. Avoid vm-exits on IO delays.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is the guest part of kvm clock implementation
It does not do tsc-only timing, as tsc can have deltas
between cpus, and it did not seem worthy to me to keep
adjusting them.

We do use it, however, for fine-grained adjustment.

Other than that, time comes from the host.

[randy dunlap: add missing include]
[randy dunlap: disallow on Voyager or Visual WS]
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Introduce GENERIC_FIND_FIRST_BIT and GENERIC_FIND_NEXT_BIT in
lib/Kconfig, defaulting to off. An arch that wants to use the
generic implementation now only has to use a select statement
to include them.

I added an always-y option (X86_CPU) to arch/x86/Kconfig.cpu
and used that to select the generic search functions. This
way ARCH=um SUBARCH=i386 automatically picks up the change
too, and arch/um/Kconfig.i386 can therefore be simplified a
bit. ARCH=um SUBARCH=x86_64 does things differently, but
still compiles fine. It seems that a "def_bool y" always
wins over a "def_bool n"?
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Switch x86_64 to generic find_first_bit. The x86_64-specific
implementation is not removed.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Generic versions of __find_first_bit and __find_first_zero_bit
are introduced as simplified versions of __find_next_bit and
__find_next_zero_bit. Their compilation and use are guarded by
a new config variable GENERIC_FIND_FIRST_BIT.

The generic versions of find_first_bit and find_first_zero_bit
are implemented in terms of the newly introduced __find_first_bit
and __find_first_zero_bit.

This patch does not remove the i386-specific implementation,
but it does switch i386 to use the generic functions by setting
GENERIC_FIND_FIRST_BIT=y for X86_32.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The versions with inline assembly are in fact slower on the machines I
tested them on (in userspace) (Athlon XP 2800+, p4-like Xeon 2.8GHz, AMD
Opteron 270). The i386-version needed a fix similar to 06024f21 to avoid
crashing the benchmark.

Benchmark using: gcc -fomit-frame-pointer -Os. For each bitmap size
1...512, for each possible bitmap with one bit set, for each possible
offset: find the position of the first bit starting at offset. If you
follow ;). Times include setup of the bitmap and checking of the
results.

		Athlon		Xeon		Opteron 32/64bit
x86-specific:	0m3.692s	0m2.820s	0m3.196s / 0m2.480s
generic:	0m2.622s	0m1.662s	0m2.100s / 0m1.572s

If the bitmap size is not a multiple of BITS_PER_LONG, and no set
(cleared) bit is found, find_next_bit (find_next_zero_bit) returns a
value outside of the range [0, size]. The generic version always returns
exactly size. The generic version also uses unsigned long everywhere,
while the x86 versions use a mishmash of int, unsigned (int), long and
unsigned long.

Using the generic version does give a slightly bigger kernel, though.

defconfig:	   text    data     bss     dec     hex filename
x86-specific:	4738555  481232  626688 5846475  5935cb vmlinux (32 bit)
generic:	4738621  481232  626688 5846541  59360d vmlinux (32 bit)
x86-specific:	5392395  846568  724424 6963387  6a40bb vmlinux (64 bit)
generic:	5392458  846568  724424 6963450  6a40fa vmlinux (64 bit)
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Linus pointed it out that PAT should not depend on NONPROMISC_DEVMEM.

Also make PAT non-default.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stephen Rothwell reported that linux-next did not build on powerpc64.

make optimized inlining dependent on architecture opt-in.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Linus pointed it out that PAT should not depend on NONPROMISC_DEVMEM.

Also make PAT non-default.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

  * Here is a simple patch to use an allocated array of cpumasks to
    represent cpumask_of_cpu() instead of constructing one on the stack.
    It's based on the Kconfig option "HAVE_CPUMASK_OF_CPU_MAP" which is
    currently only set for x86_64 SMP.  Otherwise the the existing
    cpumask_of_cpu() is used but has been changed to produce an lvalue
    so a pointer to it can be used.

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

For example, If the physical address layout on a two node system with 8 GB
memory is something like:
node 0: 0-2GB, 4-6GB
node 1: 2-4GB, 6-8GB

Current kernels fail to boot/detect this NUMA topology.

ACPI SRAT tables can expose such a topology which needs to be supported.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

simplified and streamlined kgdb support on x86, both 32-bit and 64-bit,
based on patch from:

  Subject: kgdb: core-lite
  From: Jason Wessel <jason.wessel@windriver.com>

[ and countless other authors - see the patch for details. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Move wakeup code to .c, so that video mode setting code can be shared
between boot and wakeup. Remove nasty assembly code in 64-bit case by
re-using trampoline code. Stack setup was fixed to clear high 16bits
of %esp, maybe that fixes some machines.

.c code sharing and morse code was done H. Peter Anvin, Sam Ravnborg
reviewed kbuild related stuff, and it seems okay to him. Rafael did
some cleanups.

[rjw:
* Made the patch stop breaking compilation on x86-32
* Added arch/x86/kernel/acpi/sleep.h
* Got rid of compiler warnings in arch/x86/kernel/acpi/sleep.c
* Fixed 32-bit compilation on x86-64 systems
* Added include/asm-x86/trampoline.h and fixed the non-SMP
  compilation on 64-bit x86
* Removed arch/x86/kernel/acpi/sleep_32.c which was not used
* Fixed some breakage caused by the integration of smpboot.c done
  under us in the meantime]
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

without this patch:

VOYAGER:
kernel/built-in.o: In function `crash_kexec':
(.text+0x28588): undefined reference to `machine_crash_shutdown'

VISWS:
kernel/built-in.o: In function `crash_kexec':
/next-20080401/kernel/kexec.c:1074: undefined reference to `machine_crash_shutdown'
make[1]: *** [.tmp_vmlinux1] Error 1

because arch/x86/kernel/reboot.c isn't built since CONFIG_X86_BIOS_REBOOT=n,
so machine_crash_shutdown() isn't available.

This patch does seem a small bit odd since the KEXEC help text says that
kexec is independent of the system firmware.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Allow the maximum number of nodes in an x86_64 system to
be configurable. This patch does NOT change the default value
but allows the value to be a config option.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix double help section in PAT Kconfig. Thanks to Randy Dunlap for catching
this bug.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Sets up pat_init() infrastructure.

PAT MSR has following setting.
	PAT
	|PCD
	||PWT
	|||
	000 WB		_PAGE_CACHE_WB
	001 WC		_PAGE_CACHE_WC
	010 UC-		_PAGE_CACHE_UC_MINUS
	011 UC		_PAGE_CACHE_UC

We are effectively changing WT from boot time setting to WC.
UC_MINUS is used to provide backward compatibility to existing /dev/mem
users(X).

reserve_memtype and free_memtype are new interfaces for maintaining alias-free
mapping. It is currently implemented in a simple way with a linked list and
not optimized. reserve and free tracks the effective memory type, as a result
of PAT and MTRR setting rather than what is actually requested in PAT.

pat_init piggy backs on mtrr_init as the rules for setting both pat and mtrr
are same.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We use the same routing as x86_64, moved now to setup.c.
Just with a few ifdefs inside.
Note that this routing uses prefill_possible_map().
It has the very nice side effect of allowing hotplugging of
cpus that are marked as present but disabled by acpi bios.
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The proper dependency check uncovered a few dependency problems,
the subarchitecture used a mixture of selects and depends on SMP
and PCI dependency was messed up.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

X86_HT is used for hyperthreading or multicore on 32-bit.
The X86_HT on 64-bit is different from 32-bit, it means hyperthreading only.
And X86_HT is not used on 64-bit except from cpu/initel_cacheinfo.c.

Unify X86_HT for hyperthreading or multicore.
Turn X86_HT on when X86_64 and SMP are enabled.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NRavikiran Thirumalai <kiran@scalemp.com>
Acked-by: NShai Fultheim <shai@scalemp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Semaphores are no longer performance-critical, so a generic C
implementation is better for maintainability, debuggability and
extensibility.  Thanks to Peter Zijlstra for fixing the lockdep
warning.  Thanks to Harvey Harrison for pointing out that the
unlikely() was unnecessary.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>

Move 00-INDEX entries to power/00-INDEX (and add entry for
pm_qos_interface.txt).

Update references to moved filenames.

Fix some trailing whitespace.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

quicklists cause a serious memory leak on 32-bit x86,
as documented at:

  http://bugzilla.kernel.org/show_bug.cgi?id=9991

the reason is that the quicklist pool is a special-purpose
cache that grows out of proportion. It is not accounted for
anywhere and users have no way to even realize that it's
the quicklists that are causing RAM usage spikes. It was
supposed to be a relatively small pool, but as demonstrated
by KOSAKI Motohiro, they can grow as large as:

  Quicklists:    1194304 kB

given how much trouble this code has caused historically,
and given that Andrew objected to its introduction on x86
(years ago), the best option at this point is to remove them.

[ any performance benefits of caching constructed pgds should
  be implemented in a more generic way (possibly within the page
  allocator), while still allowing constructed pages to be
  allocated by other workloads. ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add CONFIG_HAVE_KRETPROBES to the arch/<arch>/Kconfig file for relevant
architectures with kprobes support.  This facilitates easy handling of
in-kernel modules (like samples/kprobes/kretprobe_example.c) that depend on
kretprobes being present in the kernel.

Thanks to Sam Ravnborg for helping make the patch more lean.

Per Mathieu's suggestion, added CONFIG_KRETPROBES and fixed up dependencies.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most classic Pentiums don't have hardware virtualization extension,
and building kvm with Voyager, Visual Workstation, or NUMAQ
generates spurious failures.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>

It's always been broken, but recent fixes actually made it do something,
and now the brokenness shows up as the resulting kernel simply not
working at all.

So it used to be that you could enable this config option, and it just
didn't do anything.  Now we'd better stop people from enabling it by
mistake, since it _does_ do something, but does it so badly as to be
unusable.

Code to actually make it work is pending, but incomplete and won't be
merged into 2.6.25 in any case.
Acked-by: NArjan van de Ven <arjan@infradead.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The KVM configuration is no longer visible in the latest git tree. It looks
like it is selected by HAVE_SETUP_PER_CPU_AREA. I've moved HAVE_KVM to
under CONFIG_X86.
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>