Similar to what is implemented in bonding. User is able to ask team
driver to send IGMP rejoins in case port is enabled or disabled. Using
previously introduced netdev notifier.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, bond_resend_igmp_join_requests() looks for vlans attached to
bonding device, bridge where bonding act as port manually. It does not
care of other scenarios, like stacked bonds or team device above. Make
this more generic and use netdev notifier to propagate the event to
upper devices and to actually call ip_mc_rejoin_groups().
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Acked-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When port is enabled or disabled, allow to notify peers by unsolicitated
NAs or gratuitous ARPs. Disabled by default.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for iproute2 command 'bridge fdb replace ...'.
The rtnletlink call back function ndo_fdb_add will be called
with the NLM_F_REPLACE flag set.
Simply return -EOPNOTSUP.

Resubmitted because net-next was closed last week.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to replace an existing entry found in the
vxlan fdb database. The entry in question is identified
by its unicast mac address and the destination information
is changed. If the entry is not found, it is added in the
forwarding database. This is similar to changing an entry
in the neighbour table.

Multicast mac addresses can not be changed with the replace
option.

This is useful for virtual machine migration when the
destination of a target virtual machine changes. The replace
feature can be used instead of delete followed by add.

Resubmitted because net-next was closed last week.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuchung Cheng says:

====================
This patch series improve RTT sampling in three ways:
1. Sample RTT during fast recovery and reordering events.
2. Favor ack-based RTT to timestamps because of broken TS ECR fields
3. Consolidate the RTT measurement logic.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If RTT is not available because Karn's check has failed or no
new packet is acked, use the RTT measured from SACK to estimate
the RTO. The sender can continue to estimate the RTO during loss
recovery or reordering event upon receiving non-partial ACKs.

This also changes when the RTO is re-armed. Previously it is
only re-armed when some data is cummulatively acknowledged (i.e.,
SND.UNA advances), but now it is re-armed whenever RTT estimator
is updated. This feature is particularly useful to reduce spurious
timeout for buffer bloat including cellular carriers [1], and
RTT estimation on reordering events.

[1] "An In-depth Study of LTE: Effect of Network Protocol and
 Application Behavior on Performance", In Proc. of SIGCOMM 2013
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Take RTT sample if an ACK selectively acks some sequences that
have never been retransmitted. The Karn's algorithm does not apply
even if that ACK (s)acks other retransmitted sequences, because it
must been generated by an original but perhaps out-of-order packet.
There is no ambiguity. In case when multiple blocks are newly
sacked because of ACK losses the earliest block is used to
measure RTT, similar to cummulative ACKs.

Such RTT samples allow the sender to estimate the RTO during loss
recovery and packet reordering events. It is still useful even with
TCP timestamps. That's because during these events the SND.UNA may
not advance preventing RTT samples from TS ECR (thus the FLAG_ACKED
check before calling tcp_ack_update_rtt()).  Therefore this new
RTT source is complementary to existing ACK and TS RTT mechanisms.

This patch does not update the RTO. It is done in the next patch.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prefer packet timings to TS-ecr for RTT measurements when both
sources are available. That's because broken middle-boxes and remote
peer can return packets with corrupted TS ECR fields. Similarly most
congestion controls that require RTT signals favor timing-based
sources as well. Also check for bad TS ECR values to avoid RTT
blow-ups. It has happened on production Web servers.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The first patch consolidates SYNACK and other RTT measurement to use a
central function tcp_ack_update_rtt(). A (small) bonus is now SYNACK
RTT measurement happens after PAWS check, potentially reducing the
impact of RTO seeding on bad TCP timestamps values.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fabio Estevam says:

====================
This series improves clock handling in the driver by not enabling/disabling
the optional ptp and enet_out clocks unconditionally, check for the return value
of clk_prepare_enable and also handle clk_ptp in suspend/resume.

Remove an unneeded check in platform_get_resource() and also use
devm_request_irq() that can help to simplify the code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NFrank Li <lznuaa@gmail.com>

Using devm_request_irq() can make the code smaller and cleaner.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As devm_ioremap_resource() is used, there is no need to explicitely check the
return value from platform_get_resource(), as this is something that
devm_ioremap_resource() takes care by itself.

Also, place platform_get_resource() prior to devm_ioremap_resource() for
better code readability.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

clk_ptp should also be enabled in fec_resume() and disabled in fec_suspend().
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On fec_probe the clocks are enabled in the following order:

clk_ahb -> clk_ipg -> clk_enet_out -> clk_ptp

, so in the error and remove paths we should disabled them in the opposite
order.

Also fix the order in the suspend/resume functions.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

clk_enet_out and clk_ptp are optional clocks, so we should not enable/disable
them unconditionally.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds transmit time stamping to the tun/tap driver. Similar
support already exists for UDP, can, and raw packets.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the private error queue delivery function from the
af_packet code to the core socket method. In this way, network layers
only needing the error queue for transmit time stamping can share common
code.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add poll controller function for velocity nic.
Signed-off-by: NAmit Uttamchandani <auttamchandani@logicube.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Suggested by coccinelle and manually verified.
Signed-off-by: NAlexandru Juncu <alexj@rosedu.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Applied error fixes suggested by checpatch.pl
Signed-off-by: NDragos Foianu <dragos.foianu@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "A couple interesting SKB fragment handling fixes, plus the usual small
  bits here and there:

   1) Fix 64-bit divide build failure on 32-bit platforms in mlx5, from
      Tim Gardner.

   2) Get rid of a stupid reimplementation on "%*phC" in our sysfs MAC
      address printing helper.

   3) Fix NETIF_F_SG capability advertisement in hyperv driver, if the
      device can't do checksumming offloads then it shouldn't say it can
      do SG either.  From Haiyang Zhang.

   4) bgmac needs to depend on PHYLIB, from Hauke Mehrtens.

   5) Don't leak DMA mappings on mapping failures, from Neil Horman.

   6) We need to reset the transport header of SKBs in ipv4 before we
      attempt to perform early socket demux, just like ipv6 does.  From
      Eric Dumazet.

   7) Add missing locking on vxlan device removal, from Stephen
      Hemminger.

   8) xen-netfront has to make two passes over an SKB to prepare it for
      transfer.  One pass calculates the number of slots needed, the
      second massages the SKB and fills the slots.  Unfortunately, the
      first pass doesn't calculate the number of slots properly so we
      can end up trying to build a MAX_SKB_FRAGS + 1 SKB which doesn't
      work out so well.  Fix from Jan Beulich with help and discussion
      with several others.

   9) Fix a similar problem in tun and macvtap, which have to split up
      scatter-gather elements at PAGE_SIZE boundaries.  Don't do
      zerocopy if it would result in a > MAX_SKB_FRAGS skb.  Fixes from
      Jason Wang.

  10) On receive, once we've decoded the VLAN state completely, clear
      skb->vlan_tci.  Otherwise demuxed tunnels underneath can trigger
      the VLAN code again, corrupting the packet.  Fix from Eric
      Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  vlan: fix a race in egress prio management
  vlan: mask vlan prio bits
  macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
  tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
  pkt_sched: sch_qfq: remove a source of high packet delay/jitter
  xen-netfront: pull on receive skb may need to happen earlier
  vxlan: add necessary locking on device removal
  hyperv: Fix the NETIF_F_SG flag setting in netvsc
  net: Fix sysfs_format_mac() code duplication.
  be2net: Fix to avoid hardware workaround when not needed
  macvtap: do not assume 802.1Q when send vlan packets
  macvtap: fix the missing ret value of TUNSETQUEUE
  ipv4: set transport header earlier
  mlx5 core: Fix __udivdi3 when compiling for 32 bit arches
  bgmac: add dependency to phylib
  net/irda: fixed style issues in irlan_eth
  ethtool: fixed trailing statements in ethtool
  ndisc: bool initializations should use true and false
  atl1e: unmap partially mapped skb on dma error and free skb

Pull x86 fixes from Peter Anvin:
 "Trying again to get the fixes queue, including the fixed IDT alignment
  patch.

  The UEFI patch is by far the biggest issue at hand: it is currently
  causing quite a few machines to boot.  Which is sad, because the only
  reason they would is because their BIOSes touch memory that has
  already been freed.  The other major issue is that we finally have
  tracked down the root cause of a significant number of machines
  failing to suspend/resume"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Make sure IDT is page aligned
  x86, suspend: Handle CPUs which fail to #GP on RDMSR
  x86/platform/ce4100: Add header file for reboot type
  Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()"
  efivars: check for EFI_RUNTIME_SERVICES

Pull md bug fixes from NeilBrown:
 "Sorry boss, back at work now boss.  Here's them nice shiny patches ya
  wanted.  All nicely tagged and justified for -stable and everyfing:

  Three bug fixes for md in 3.10

  3.10 wasn't a good release for md.  The bio changes left a couple of
  bugs, and an md "fix" created another one.

  These three patches appear to fix the issues and have been tagged for
  -stable"

* tag 'md-3.11-fixes' of git://neil.brown.name/md:
  md/raid1: fix bio handling problems in process_checks()
  md: Remove recent change which allows devices to skip recovery.
  md/raid10: fix two problems with RAID10 resync.

Pull drm fixes from Dave Airlie:
 "You'll be terribly disappointed in this, I'm not trying to sneak any
  features in or anything, its mostly radeon and intel fixes, a couple
  of ARM driver fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits)
  drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
  drm/radeon/dpm/atom: fix broken gcc harder
  drm/radeon/dpm/atom: restructure logic to work around a compiler bug
  drm/radeon/dpm: fix atom vram table parsing
  drm/radeon: fix an endian bug in atom table parsing
  drm/radeon: add a module parameter to disable aspm
  drm/rcar-du: Use the GEM PRIME helpers
  drm/shmobile: Use the GEM PRIME helpers
  uvesafb: Really allow mtrr being 0, as documented and warn()ed
  radeon kms: do not flush uninitialized hotplug work
  drm/radeon/dpm/sumo: handle boost states properly when forcing a perf level
  drm/radeon: align VM PTBs (Page Table Blocks) to 32K
  drm/radeon: allow selection of alignment in the sub-allocator
  drm/radeon: never unpin UVD bo v3
  drm/radeon: fix UVD fence emit
  drm/radeon: add fault decode function for CIK
  drm/radeon: add fault decode function for SI (v2)
  drm/radeon: add fault decode function for cayman/TN (v2)
  drm/radeon: use radeon device for request firmware
  drm/radeon: add missing ttm_eu_backoff_reservation to radeon_bo_list_validate
  ...

egress_priority_map[] hash table updates are protected by rtnl,
and we never remove elements until device is dismantled.

We have to make sure that before inserting an new element in hash table,
all its fields are committed to memory or else another cpu could
find corrupt values and crash.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 48cc32d3
("vlan: don't deliver frames for unknown vlans to protocols")
Florian made sure we set pkt_type to PACKET_OTHERHOST
if the vlan id is set and we could find a vlan device for this
particular id.

But we also have a problem if prio bits are set.

Steinar reported an issue on a router receiving IPv6 frames with a
vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device,
because skb->vlan_tci is set.

Forwarded frame is completely corrupted : We can see (8100:4000)
being inserted in the middle of IPv6 source address :

16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 >
9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64
       0x0000:  0000 0029 8000 c7c3 7103 0001 a0ae e651
       0x0010:  0000 0000 ccce 0b00 0000 0000 1011 1213
       0x0020:  1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
       0x0030:  2425 2627 2829 2a2b 2c2d 2e2f 3031 3233

It seems we are not really ready to properly cope with this right now.

We can probably do better in future kernels :
vlan_get_ingress_priority() should be a netdev property instead of
a per vlan_dev one.

For stable kernels, lets clear vlan_tci to fix the bugs.
Reported-by: NSteinar H. Gunderson <sesse@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.

Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.

This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.

We can do further optimization on top.

This bug were introduced from b92946e2
(macvtap: zerocopy: validate vectors before building skb).

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.

Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.

This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.

We can do further optimization on top.

The bug were introduced from commit 0690899b
(tun: experimental zero copy tx support)

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

QFQ+ inherits from QFQ a design choice that may cause a high packet
delay/jitter and a severe short-term unfairness. As QFQ, QFQ+ uses a
special quantity, the system virtual time, to track the service
provided by the ideal system it approximates. When a packet is
dequeued, this quantity must be incremented by the size of the packet,
divided by the sum of the weights of the aggregates waiting to be
served. Tracking this sum correctly is a non-trivial task, because, to
preserve tight service guarantees, the decrement of this sum must be
delayed in a special way [1]: this sum can be decremented only after
that its value would decrease also in the ideal system approximated by
QFQ+. For efficiency, QFQ+ keeps track only of the 'instantaneous'
weight sum, increased and decreased immediately as the weight of an
aggregate changes, and as an aggregate is created or destroyed (which,
in its turn, happens as a consequence of some class being
created/destroyed/changed). However, to avoid the problems caused to
service guarantees by these immediate decreases, QFQ+ increments the
system virtual time using the maximum value allowed for the weight
sum, 2^10, in place of the dynamic, instantaneous value. The
instantaneous value of the weight sum is used only to check whether a
request of weight increase or a class creation can be satisfied.

Unfortunately, the problems caused by this choice are worse than the
temporary degradation of the service guarantees that may occur, when a
class is changed or destroyed, if the instantaneous value of the
weight sum was used to update the system virtual time. In fact, the
fraction of the link bandwidth guaranteed by QFQ+ to each aggregate is
equal to the ratio between the weight of the aggregate and the sum of
the weights of the competing aggregates. The packet delay guaranteed
to the aggregate is instead inversely proportional to the guaranteed
bandwidth. By using the maximum possible value, and not the actual
value of the weight sum, QFQ+ provides each aggregate with the worst
possible service guarantees, and not with service guarantees related
to the actual set of competing aggregates. To see the consequences of
this fact, consider the following simple example.

Suppose that only the following aggregates are backlogged, i.e., that
only the classes in the following aggregates have packets to transmit:
one aggregate with weight 10, say A, and ten aggregates with weight 1,
say B1, B2, ..., B10. In particular, suppose that these aggregates are
always backlogged. Given the weight distribution, the smoothest and
fairest service order would be:
A B1 A B2 A B3 A B4 A B5 A B6 A B7 A B8 A B9 A B10 A B1 A B2 ...

QFQ+ would provide exactly this optimal service if it used the actual
value for the weight sum instead of the maximum possible value, i.e.,
11 instead of 2^10. In contrast, since QFQ+ uses the latter value, it
serves aggregates as follows (easy to prove and to reproduce
experimentally):
A B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 A A A A A A A A A A B1 B2 ... B10 A A ...

By replacing 10 with N in the above example, and by increasing N, one
can increase at will the maximum packet delay and the jitter
experienced by the classes in aggregate A.

This patch addresses this issue by just using the above
'instantaneous' value of the weight sum, instead of the maximum
possible value, when updating the system virtual time.  After the
instantaneous weight sum is decreased, QFQ+ may deviate from the ideal
service for a time interval in the order of the time to serve one
maximum-size packet for each backlogged class. The worst-case extent
of the deviation exhibited by QFQ+ during this time interval [1] is
basically the same as of the deviation described above (but, without
this patch, QFQ+ suffers from such a deviation all the time). Finally,
this patch modifies the comment to the function qfq_slot_insert, to
make it coherent with the fact that the weight sum used by QFQ+ can
now be lower than the maximum possible value.

[1] P. Valente, "Extending WF2Q+ to support a dynamic traffic mix",
Proceedings of AAA-IDEA'05, June 2005.
Signed-off-by: NPaolo Valente <paolo.valente@unimore.it>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg KH:
 "Here are some driver core patches for 3.11-rc2.  They aren't really
  bugfixes, but a bunch of new helper macros for drivers to properly
  create attribute groups, which drivers and subsystems need to fix up a
  ton of race issues with incorrectly creating sysfs files (binary and
  normal) after userspace has been told that the device is present.

  Also here is the ability to create binary files as attribute groups,
  to solve that race condition, which was impossible to do before this,
  so that's my fault the drivers were broken.

  The majority of the .c changes is indenting and moving code around a
  bit.  It affects no existing code, but allows the large backlog of 70+
  patches that I already have created to start flowing into the
  different subtrees, instead of having to live in my driver-core tree,
  causing merge nightmares in linux-next for the next few months.

  These were finalized too late for the -rc1 merge window, which is why
  they were didn't make that pull request, testing and review from
  others didn't happen until a few weeks ago, and then there's the whole
  distraction of the past few days, which prevented these from getting
  to you sooner, sorry about that.

  Oh, and there's a bugfix for the documentation build warning in here
  as well.  All of these have been in linux-next this week, with no
  reported problems"

* tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver-core: fix new kernel-doc warning in base/platform.c
  sysfs: use file mode defines from stat.h
  sysfs: add more helper macro's for (bin_)attribute(_groups)
  driver core: add default groups to struct class
  driver core: Introduce device_create_groups
  sysfs: prevent warning when only using binary attributes
  sysfs: add support for binary attributes in groups
  driver core: device.h: add RW and RO attribute macros
  sysfs.h: add BIN_ATTR macro
  sysfs.h: add ATTRIBUTE_GROUPS() macro
  sysfs.h: add __ATTR_RW() macro

Pull hwmon fix from Guenter Roeck:
 "Single patch to staticize a local variable"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (abx500) Staticize abx500_temp_attributes

Pull phase two of __cpuinit removal from Paul Gortmaker:
 "With the __cpuinit infrastructure removed earlier, this group of
  commits only removes the function/data tagging that was done with the
  various (now no-op) __cpuinit related prefixes.

  Now that the dust has settled with yesterday's v3.11-rc1, there
  hopefully shouldn't be any new users leaking back in tree, but I think
  we can leave the harmless no-op stubs there for a release as a
  courtesy to those who still have out of tree stuff and weren't paying
  attention.

  Although the commits are against the recent tag to allow for minor
  context refreshes for things like yesterday's v3.11-rc1~ slab content,
  the patches have been largely unchanged for weeks, aside from such
  trivial updates.

  For detail junkies, the largely boring and mostly irrelevant history
  of the patches can be viewed at:

    http://git.kernel.org/cgit/linux/kernel/git/paulg/cpuinit-delete.git

  If nothing else, I guess it does at least demonstrate the level of
  involvement required to shepherd such a treewide change to completion.

  This is the same repository of patches that has been applied to the
  end of the daily linux-next branches for the past several weeks"

* 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (28 commits)
  block: delete __cpuinit usage from all block files
  drivers: delete __cpuinit usage from all remaining drivers files
  kernel: delete __cpuinit usage from all core kernel files
  rcu: delete __cpuinit usage from all rcu files
  net: delete __cpuinit usage from all net files
  acpi: delete __cpuinit usage from all acpi files
  hwmon: delete __cpuinit usage from all hwmon files
  cpufreq: delete __cpuinit usage from all cpufreq files
  clocksource+irqchip: delete __cpuinit usage from all related files
  x86: delete __cpuinit usage from all x86 files
  score: delete __cpuinit usage from all score files
  xtensa: delete __cpuinit usage from all xtensa files
  openrisc: delete __cpuinit usage from all openrisc files
  m32r: delete __cpuinit usage from all m32r files
  hexagon: delete __cpuinit usage from all hexagon files
  frv: delete __cpuinit usage from all frv files
  cris: delete __cpuinit usage from all cris files
  metag: delete __cpuinit usage from all metag files
  tile: delete __cpuinit usage from all tile files
  sh: delete __cpuinit usage from all sh files
  ...

Pull sound fixes from Takashi Iwai:
 "Except for a slightly big OMAP changes, all rest are small, mostly
  boring changes; all either 3.11 regression fixes or stable materials.

   - ASoC OMAP fixes due to non-DT OMAP4 removals
   - Other ASoC driver changes (sglt5000, wm8978, wm8948, samsung)
   - Fix missing locking for snd_pcm_stop() calls in many drivers
   - Fix the blocking request_module() in OSS sequencer
   - Fix old OSS vwsnd driver builds
   - Add a new HD-audio HDMI codec ID"

* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
  ALSA: seq-oss: Initialize MIDI clients asynchronously
  ALSA: hda - Add new GPU codec ID to snd-hda
  staging: line6: Fix unlocked snd_pcm_stop() call
  [media] saa7134: Fix unlocked snd_pcm_stop() call
  ASoC: s6000: Fix unlocked snd_pcm_stop() call
  ASoC: atmel: Fix unlocked snd_pcm_stop() call
  ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call
  ALSA: usx2y: Fix unlocked snd_pcm_stop() call
  ALSA: ua101: Fix unlocked snd_pcm_stop() call
  ALSA: 6fire: Fix unlocked snd_pcm_stop() call
  ALSA: atiixp: Fix unlocked snd_pcm_stop() call
  ALSA: asihpi: Fix unlocked snd_pcm_stop() call
  sound: oss/vwsnd: Always define vwsnd_mutex
  sound: oss/vwsnd: Add missing inclusion of linux/delay.h
  ASoC: wm8978: enable symmetric rates
  ASoC: omap-mcbsp: Use different method for DMA request when booted with DT
  ASoC: omap-dmic: Do not use platform_get_resource_byname() for DMA
  ASoC: omap-mcpdm: Do not use platform_get_resource_byname() for DMA
  ASoC: omap-pcm: Request the DMA channel differently when DT is involved
  ASoC: Samsung: Set RFS and BFS in slave mode
  ...

Fixes builds
* 'drm/3.11/fixes' of git://linuxtv.org/pinchartl/fbdev:
  drm/rcar-du: Use the GEM PRIME helpers
  drm/shmobile: Use the GEM PRIME helpers

Recent change to use bio_copy_data() in raid1 when repairing
an array is faulty.

The underlying may have changed the bio in various ways using
bio_advance and these need to be undone not just for the 'sbio' which
is being copied to, but also the 'pbio' (primary) which is being
copied from.

So perform the reset on all bios that were read from and do it early.

This also ensure that the sbio->bi_io_vec[j].bv_len passed to
memcmp is correct.

This fixes a crash during a 'check' of a RAID1 array.  The crash was
introduced in 3.10 so this is suitable for 3.10-stable.

Cc: stable@vger.kernel.org (3.10)
Reported-by: NJoe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

commit 7ceb17e8
    md: Allow devices to be re-added to a read-only array.

allowed a bit more than just that.  It also allows devices to be added
to a read-write array and to end up skipping recovery.

This patch removes the offending piece of code pending a rewrite for a
subsequent release.

More specifically:
 If the array has a bitmap, then the device will still need a bitmap
 based resync ('saved_raid_disk' is set under different conditions
 is a bitmap is present).
 If the array doesn't have a bitmap, then this is correct as long as
 nothing has been written to the array since the metadata was checked
 by ->validate_super.  However there is no locking to ensure that there
 was no write.

Bug was introduced in 3.10 and causes data corruption so
patch is suitable for 3.10-stable.

Cc: stable@vger.kernel.org (3.10)
Reported-by: NJoe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

1/ When an different between blocks is found, data is copied from
   one bio to the other.  However bv_len is used as the length to
   copy and this could be zero.  So use r10_bio->sectors to calculate
   length instead.
   Using bv_len was probably always a bit dubious, but the introduction
   of bio_advance made it much more likely to be a problem.

2/ When preparing some blocks for sync, we don't set BIO_UPTODATE
   except on bios that we schedule for a read.  This ensures that
   missing/failed devices don't confuse the loop at the top of
   sync_request write.
   Commit 8be185f2 "raid10: Use bio_reset()"
   removed a loop which set BIO_UPTDATE on all appropriate bios.
   So we need to re-add that flag.

These bugs were introduced in 3.10, so this patch is suitable for
3.10-stable, and can remove a potential for data corruption.

Cc: stable@vger.kernel.org (3.10)
Reported-by: NBrassow Jonathan <jbrassow@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

more DPM fixes for radeon.

* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
  drm/radeon/dpm/atom: fix broken gcc harder
  drm/radeon/dpm/atom: restructure logic to work around a compiler bug
  drm/radeon/dpm: fix atom vram table parsing
  drm/radeon: fix an endian bug in atom table parsing
  drm/radeon: add a module parameter to disable aspm