提交 · 4911ccdb9d052d0389353cec5cc591a3669f39cb · openanolis / cloud-kernel

04 12月, 2011 20 次提交
- M
  ASoC: Convert WM2000 into a standard CODEC driver · 4911ccdb
  由 Mark Brown 提交于 12月 02, 2011
```
We've been able to handle external amps for a while now.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  4911ccdb
- M
  ASoC: Convert wm2000 to use regmap API · 8aa1fe81
  由 Mark Brown 提交于 12月 02, 2011
```
The driver wasn't even using the ASoC common code.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  8aa1fe81
- M
  ASoC: Remove unused struct wm2000_setup_data · 012d12db
  由 Mark Brown 提交于 12月 02, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  012d12db
- M
  ASoC: Convert WM8728 to table based control init · e41d5a3b
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  e41d5a3b
- M
  ASoC: Convert WM8711 to table based control init · 2f5374d8
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  2f5374d8
- M
  ASoC: Convert WM8750 to table based DAPM and control init · 0f185e3f
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  0f185e3f
- M
  ASoC: Convert WM8741 to table based DAPM and control init · 0e62780f
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  0e62780f
- M
  ASoC: Convert WM8580 to table based DAPM and control init · f235c649
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  f235c649
- M
  ASoC: Convert WM8510 to table based DAPM and control init · b6709f3b
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  b6709f3b
- M
  ASoC: Convert WM8400 to table based DAPM and control init · b4505ab1
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  b4505ab1
- M
  ASoC: Convert WM8350 to table based DAPM and control init · e6c94e9f
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  e6c94e9f
- M
  ASoC: Convert WM9090 to devm_kzalloc() · 455b91bf
  由 Mark Brown 提交于 12月 02, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  455b91bf
- M
  ASoC: Convert WM8750 to devm_kzalloc() · 2edaed82
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  2edaed82
- M
  ASoC: Convert WM8741 to devm_kzalloc() · 5aefb306
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  5aefb306
- M
  ASoC: Convert WM8400 to devm_kzalloc() · b903c0ed
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  b903c0ed
- M
  ASoC: Convert WM8350 to devm_kzalloc() · 0d1fe0d4
  由 Mark Brown 提交于 12月 03, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  0d1fe0d4
- M
  ASoC: Convert WM2000 to devm_kzalloc() · b03e96e4
  由 Mark Brown 提交于 12月 02, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  b03e96e4
- M
  ASoC: Remove unused AUDIO_NAME define from WM8960 · 6cd4eb95
  由 Mark Brown 提交于 12月 02, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  6cd4eb95
- M
  ASoC: Remove I2C ifdefs from WM8960 · 3a0d077f
  由 Mark Brown 提交于 12月 02, 2011
```
The driver only supports I2C as the control interface.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  3a0d077f
- M
  ASoC: Remove unused -codec from Wolfson device driver names · 091edccf
  由 Mark Brown 提交于 12月 02, 2011
```
Devices that aren't MFDs don't need to distinguish this.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  091edccf
03 12月, 2011 10 次提交

ASoC: WM8903: Create default platform data structure · c0eb27cf

由 Stephen Warren 提交于 12月 02, 2011

When no platform data is supplied, point pdata at a default platform
structure. This enables two future changes:

a) Defines the default platform data values in a single place.
b) There is always a valid pdata pointer, so some conditional code can
   be simplified by a later patch.

Based on work by John Bonesio, but significantly reworked since then.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

c0eb27cf

ASoC: Move initial WM8903 identification and reset to I2C probe · 7d46a528

由 Mark Brown 提交于 12月 02, 2011

Get control of the device earlier and avoid trying to do an ASoC probe
on a card that won't work.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

7d46a528

ASoC: Convert WM8903 to direct regmap API usage · ee244ce4

由 Mark Brown 提交于 12月 02, 2011

Converting to an rbtree cache as regcache doesn't have a flat cache.
Since the top of the register map is fairly sparse this should be an
overall win.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

ee244ce4

ASoC: Don't resync WM8903 register cache on reset · 82ae55db

由 Mark Brown 提交于 12月 02, 2011

We only do this on initial power on so it's at best a waste of time as
the core will have already defaulted to the same values.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

82ae55db

ASoC: Use a normal cache sync for WM8903 · 45e96755

由 Mark Brown 提交于 12月 02, 2011

The driver used to use a complicated method to sync the register cache
after having brought the bias level up to standby in resume due to the
use of the write sequencer to manage the initial power up. Now that we
don't use the write sequencer there is no need for this and we can just
use snd_soc_cache_sync() directly.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

45e96755

ASoC: WM8903 only supports I2C so don't ifdef it · 88a1b12b

由 Mark Brown 提交于 12月 02, 2011

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

88a1b12b

ASoC: Use table based control init for WM8903 · f4a10837

由 Mark Brown 提交于 12月 02, 2011

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

f4a10837

ASoC: Convert WM8903 to devm_kzalloc() · 2950cd22

由 Mark Brown 提交于 12月 03, 2011

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NStephen Warren <swarren@nvidia.com>

2950cd22

ASoC: Mark WM8994 ADC muxes as virtual · 87b86ade

由 Mark Brown 提交于 8月 14, 2011

Since they don't actually have power bits but do have events associated
with them it's important that we bootstrap their state properly which
making them virtual does.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

87b86ade

ASoC: Convert WM8994 MICBIASes to supply widgets · 91e20854

由 Mark Brown 提交于 12月 02, 2011

There are some in tree systems using the driver but none use the MICBIAS
widgets.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

91e20854

02 12月, 2011 5 次提交

ASoC: Add missing err label · 3631e8d4

由 Mark Brown 提交于 12月 02, 2011

Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

3631e8d4

ASoC: WM8903: Disallow all invalid gpio_cfg pdata values · 6f526f0a

由 Stephen Warren 提交于 12月 01, 2011

The GPIO registers are 15 bits wide. Hence values, higher than 0x7fff are
not legal GPIO register values. Modify the pdata.gpio_cfg handling code
to reject all illegal values, not just WM8903_GPIO_NO_CONFIG (0x8000). This
will allow the later use of 0xffffffff as an invalid value in future device
tree bindings, meaning "don't touch this GPIO's configuration".
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

6f526f0a

ASoC: Drop unused state parameter from CODEC suspend callback · 84b315ee

由 Lars-Peter Clausen 提交于 12月 02, 2011

The existence of this parameter is purely historical. None of the CODEC drivers
uses it and we always pass in the same value anyway, so it should be safe to
remove it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NLiam Girdwood <lrg@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

84b315ee

ASoC: Make WM8962 beep a signal generator · 36c6b54c

由 Mark Brown 提交于 11月 27, 2011

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>

36c6b54c

M
ASoC: Make WM5100 tone generator widgets signal generators · dea8e237
由 Mark Brown 提交于 11月 27, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>
```
dea8e237

01 12月, 2011 5 次提交

ASoC: Convert WM8994 to devm_kzalloc() · 7270cebe

由 Mark Brown 提交于 12月 01, 2011

Still have a manual free in there for some realloc()ed memory as there's
no devm version of that.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

7270cebe

ASoC: Add platform data for WM8958/WM1811 microphone detection rates · cd1707a9

由 Mark Brown 提交于 12月 01, 2011

Allow systems to override the default microphone detection rates using
platform data in case the settings are not suitable (eg, due to an
unusually noisy jack).
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

cd1707a9

ASoC: Ensure we reconfigure WM8958 microphone detection on rate changes · 52ac7ab2

由 Mark Brown 提交于 12月 01, 2011

We don't need to rerun DAPM if the clock source is the same but we do
need to adjust the microphone detection rate in case we are moving from
an audio to a non-audio rate.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

52ac7ab2

ASoC: Implement support for WM1811A jack detection · af6b6fe4

由 Mark Brown 提交于 11月 30, 2011

The WM1811A features an advanced low power accessory detection subsystem
which allows the device to be maintained in a very low power state while
the system is idle without sacrificing any accessory detection features.

Implement software support for this, automatically managing the power
configuration of the device depending on the detected accessory.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

af6b6fe4

ASoC: Rename WM8994 detecting flag to mic_detecting · 157a75e6

由 Mark Brown 提交于 11月 30, 2011

More specific and avoids confusion with a following change.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

157a75e6

openanolis / cloud-kernel 接近 2 年 前同步成功

openanolis / cloud-kernel
接近 2 年前同步成功