- 26 2月, 2012 2 次提交
-
-
由 Rami Rosen 提交于
The patch removes unneeded method typedef declaration (icv_update_fn_t ) and the two struct declarations which appear in its prototype (struct hash_desc and struct scatterlist) in net/xfrm.h. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
- 25 2月, 2012 23 次提交
-
-
由 Bruce Allan 提交于
Rename e1000e_reload_nvm() to e1000e_reload_nvm_generic() to signify the function is used for more than one MAC-family type, and set and use it as a MAC ops function pointer to be consistent with the driver design. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Remove reference to non-existant function. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Rename e1000e_config_collision_dist() to e1000e_config_collision_dist_generic() to signify the function is used for more than one MAC-family type, and set and use it as a MAC ops function pointer to be consistent with the driver design. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Call the MAC ops setup_physical_interface function pointer instead of the MAC-family-specific function to conform to the rest of the driver design. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Replace e1000_check_reset_block() inline function with calls to the PHY ops check_reset_block function pointer. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Replace e1000_check_mng_mode() inline function with calls to the MAC ops check_mng_mode function pointer. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Rename e1000e_setup_link() to e1000e_setup_link_generic() to signify the function is used for more than one MAC-family type. The 82571-family has a custom setup_link function which also calls the generic function. The ich8lan-family has a custom function which should just be called via the function pointer. The 80003es2lan-family just uses the generic function. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Rename e1000e_id_led_init() to e1000e_id_led_init_generic() to signify the function is used for more than one MAC-family type. For the ich8lan MAC family, some MACs use the generic function and others use the function e1000_id_led_init_pchlan(). In all cases where e1000e_id_led_init() was called directly, change to call the function pointer to be consistent with the driver design. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pm instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Acked-by: NOliver Neukum <oliver@neukum.name> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Acked-by: NLennert Buytenhek <kernel@wantstofly.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Use memcpy to set the address to dev->dev_addr in set_mac_address, instead of mxing it up in a for loop with printing a debug msg. Check also if the given address is valid. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Danny Kukawka 提交于
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 2月, 2012 15 次提交
-
-
由 Tushar Dave 提交于
Use pr_<level> for printk Use temporary instead of multiple pr_conts Coalesce formats. Save a few bytes of object code too: $ size drivers/net/ethernet/intel/e1000/e1000_main.o* text data bss dec hex filename 60507 369 14120 74996 124f4 drivers/net/ethernet/intel/e1000/e1000_main.o.new 60717 369 14176 75262 125fe drivers/net/ethernet/intel/e1000/e1000_main.o.old Removed printing of pktdata. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTushar Dave <tushar.n.dave@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Joe Perches 提交于
Separate a complicated bit of e1000_config_dsp_after_link_change into a new static function e1000_1000Mb_check_cable_length. Reduces indentation and adds a bit of clarity. Signed-off-by: NJoe Perches <joe@perches.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Recent discussions on LKML, kernel-janitors, linux-wireless and netdev have suggested boolean comparisons should use logical operators instead of equality comparisons with true/false. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ben Greear 提交于
This allows the NIC to receive the Ethernet FCS and pass it up the stack, allowing sniffers and other interested programs to inspect the FCS. Signed-off-by: NBen Greear <greearb@candelatech.com>
-
由 Ben Greear 提交于
This allows the NIC to receive packets with bad FCS and Runts, which can help when sniffing. NOTE: r8169, at least on my NIC, silently drops packets with bad FCS instead of counting them. It seems they are only received in any fashion if the RxCRC flag is set (which this patch allows). Signed-off-by: NBen Greear <greearb@candelatech.com>
-
由 Ben Greear 提交于
This allows the NIC to pass the Ethernet FCS on up the stack, and is useful when sniffing networks. Signed-off-by: NBen Greear <greearb@candelatech.com>
-
由 Ben Greear 提交于
This allows the NIC to receive Runts and frames with bad Ethernet Frame Checksums (FCS). Useful to sniffing & diagnosing bad networks. Signed-off-by: NBen Greear <greearb@candelatech.com>
-
由 Ben Greear 提交于
This allows the NIC to pass the Ethernet Frame Checksum (FCS) up the stack. Useful when sniffing packets. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ben Greear 提交于
Good for testing the RX logic for bad CRC handling. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ben Greear 提交于
This allows the NIC to receive all frames available, including those with bad FCS, un-matched vlans, ethernet control frames, and more. Tested by sending frames with bad FCS. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ben Greear 提交于
This flag requests that network devices pass all received frames up the stack, even ones with errors such as invalid FCS (frame check sum). This will allow sniffers to see bad packets and perhaps give the user some idea how to fix the problem. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ben Greear 提交于
This can aid with testing the RX logic for bad CRCs. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ben Greear 提交于
This is useful for testing RX handling of frames with bad CRCs. Requires driver support to actually put the packet on the wire properly. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ben Greear 提交于
This enables enabling/disabling reception of the Ethernet FCS. This can be useful when sniffing packets. For e1000e, enabling RXFCS can change the default behaviour for how the NIC handles CRC. Disabling RXFCS will take the NIC back to defaults, which can be configured as part of the module options. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-