- 03 7月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Just did a directly merge from asm-ppc into asm-powerpc. This is the last header that we directly include from asm-powerpc. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 22 5月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 5月, 2007 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Add hooks to allow a paravirt implementation to track the lifetime of an mm. Paravirtualization requires three hooks, but only two are needed in common code. They are: arch_dup_mmap, which is called when a new mmap is created at fork arch_exit_mmap, which is called when the last process reference to an mm is dropped, which typically happens on exit and exec. The third hook is activate_mm, which is called from the arch-specific activate_mm() macro/function, and so doesn't need stub versions for other architectures. It's called when an mm is first used. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: linux-arch@vger.kernel.org Cc: James Bottomley <James.Bottomley@SteelEye.com> Acked-by: NIngo Molnar <mingo@elte.hu>
-
- 29 6月, 2006 1 次提交
-
-
由 Paul Mackerras 提交于
When we increased the address space per process to 2^44 bytes, the number of contexts that we could actually use reduced, but we forgot to decrease the MAX_CONTEXT definition. (Fortunately this would only cause problems if we actually had more than 512k user processes running.) This patch corrects the definition. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 12 6月, 2006 1 次提交
-
-
由 Paul Mackerras 提交于
The pgdir field in the paca was a leftover from the dynamic VSIDs patch, and is not used in the current kernel code. This removes it. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 1月, 2006 1 次提交
-
-
由 Arnd Bergmann 提交于
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 19 11月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
For these, I have just done the lame-o merge where the file ends up looking like: #ifndef CONFIG_PPC64 #include <asm-ppc/foo.h> #else ... contents from asm-ppc64/foo.h #endif so nothing has changed, really, except that we reduce include/asm-ppc64 a bit more. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 11月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 11月, 2005 1 次提交
-
-
由 David Gibson 提交于
Here's a revised version. This re-introduces the set_bits() function from ppc64, which I removed because I thought it was unused (it exists on no other arch). In fact it is used in the powermac interrupt code (but not on pSeries). - We use LARXL/STCXL macros to generate the right (32 or 64 bit) instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S - ppc32 previously used a full "sync" barrier at the end of test_and_*_bit(), whereas ppc64 used an "isync". The merged version uses "isync", since I believe that's sufficient. - The ppc64 versions of then minix_*() bitmap functions have changed semantics. Previously on ppc64, these functions were big-endian (that is bit 0 was the LSB in the first 64-bit, big-endian word). On ppc32 (and x86, for that matter, they were little-endian. As far as I can tell, the big-endian usage was simply wrong - I guess no-one ever tried to use minixfs on ppc64. - On ppc32 find_next_bit() and find_next_zero_bit() are no longer inline (they were already out-of-line on ppc64). - For ppc64, sched_find_first_bit() has moved from mmu_context.h to the merged bitops. What it was doing in mmu_context.h in the first place, I have no idea. - The fls() function is now implemented using the cntlzw instruction on ppc64, instead of generic_fls(), as it already was on ppc32. - For ARCH=ppc, this patch requires adding arch/powerpc/lib to the arch/ppc/Makefile. This in turn requires some changes to arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc. Built and running on G5. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 06 5月, 2005 1 次提交
-
-
由 David Gibson 提交于
This patch started as simply removing a few never-used macros from asm-ppc64/pgtable.h, then kind of grew. It now makes a bunch of cleanups to the ppc64 low-level header files (with corresponding changes to .c files where necessary) such as: - Abolishing never-used macros - Eliminating multiple #defines with the same purpose - Removing pointless macros (cases where just expanding the macro everywhere turns out clearer and more sensible) - Removing some cases where macros which could be defined in terms of each other weren't - Moving imalloc() related definitions from pgtable.h to their own header file (imalloc.h) - Re-arranging headers to group things more logically - Moving all VSID allocation related things to mmu.h, instead of being split between mmu.h and mmu_context.h - Removing some reserved space for flags from the PMD - we're not using it. - Fix some bugs which broke compile with STRICT_MM_TYPECHECKS. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-