- 15 3月, 2012 1 次提交
-
-
由 Christoph Hellwig 提交于
Switch the quota code over to use the generic XFS statistics infrastructure. While the legacy /proc/fs/xfs/xqm and /proc/fs/xfs/xqmstats interfaces are preserved for now the statistics that still have a meaning with the current code are now also available from /proc/fs/xfs/stats. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 14 3月, 2012 5 次提交
-
-
由 Christoph Hellwig 提交于
Add an in-memory only flag to say we logged timestamps only, and use it to check if fdatasync can optimize away the log force. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Add a new ili_fields member to the inode log item to isolate the in-memory flags from the ones that actually go to the log. This will allow tracking timestamp-only updates for fdatasync and O_DSYNC in the next patch and prepares for divorcing the on-disk log format from the in-memory log item a little further down the road. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Move all code messing with the inode log item flags into xfs_inode_item_format to make sure xfs_inode_item_size really only calculates the the number of vectors, but doesn't modify any state of the inode item. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Timestamps on regular files are the last metadata that XFS does not update transactionally. Now that we use the delaylog mode exclusively and made the log scode scale extremly well there is no need to bypass that code for timestamp updates. Logging all updates allows to drop a lot of code, and will allow for further performance improvements later on. Note that this patch drops optimized handling of fdatasync - it will be added back in a separate commit. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Do not use unlogged metadata updates and the VFS dirty bit for updating the file size after writeback. In addition to causing various problems with updates getting delayed for far too long this also drags in the unscalable VFS dirty tracking, and is one of the few remaining unlogged metadata updates. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 06 3月, 2012 3 次提交
-
-
由 Christoph Hellwig 提交于
If we convert and unwritten extent past the current i_size log the size update as part of the extent manipulation transactions instead of doing an unlogged metadata update later. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Replace xfs_ioend_new_eof with a new inline xfs_new_eof helper that doesn't require and ioend, and is available also outside of xfs_aops.c. Also make the code a bit more clear by using a normal if statement instead of a slightly misleading MIN(). Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
The new concurrency managed workqueues are cheap enough that we can create per-filesystem instead of global workqueues. This allows us to remove the trylock or defer scheme on the ilock, which is not helpful once we have outstanding log reservations until finishing a size update. Also allow the default concurrency on this workqueues so that I/O completions blocking on the ilock for one inode do not block process for another inode. Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 01 3月, 2012 3 次提交
-
-
由 Christoph Hellwig 提交于
Now that XFS takes quota reservations into account there is no need to flush anything before reporting quotas - in addition to beeing fully transactional all quota information is also 100% coherent with the rest of the filesystem now. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Report all quota usage including the currently pending reservations. This avoids the need to flush delalloc space before gathering quota information, and matches quota enforcement, which already takes the reservations into account. This fixes xfstests 270. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
The is no good reason to have these two separate, and for the next change we would need the full struct xfs_dquot in xfs_qm_export_dquot, so better just fold the code now instead of changing it spuriously. Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 26 2月, 2012 1 次提交
-
-
由 Alex Elder 提交于
At the end of xfs_reclaim_inode(), the inode is locked in order to we wait for a possible concurrent lookup to complete before the inode is freed. This synchronization step was taking both the ILOCK and the IOLOCK, but the latter was causing lockdep to produce reports of the possibility of deadlock. It turns out that there's no need to acquire the IOLOCK at this point anyway. It may have been required in some earlier version of the code, but there should be no need to take the IOLOCK in xfs_iget(), so there's no (longer) any need to get it here for synchronization. Add an assertion in xfs_iget() as a reminder of this assumption. Dave Chinner diagnosed this on IRC, and Christoph Hellwig suggested no longer including the IOLOCK. I just put together the patch. Signed-off-by: NAlex Elder <elder@dreamhost.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 23 2月, 2012 13 次提交
-
-
由 Christoph Hellwig 提交于
Split the log regrant case out of xfs_log_reserve into a separate function, and merge xlog_grant_log_space and xlog_regrant_write_log_space into their respective callers. Also replace the XFS_LOG_PERM_RESERV flag, which easily got misused before the previous cleanups with a simple boolean parameter. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Add a new data structure to allow sharing code between the log grant and regrant code. Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
The tic->t_wait waitqueues can never have more than a single waiter on them, so we can easily replace them with a task_struct pointer and wake_up_process. Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Remove the now unused opportunistic parameter, and use the the xlog_writeq_wake and xlog_reserveq_wake helpers now that we don't have to care about the opportunistic wakeups. Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
There is no reason to wake up log space waiters when unlocking inodes or dquots, and the commit log has no explanation for this function either. Given that we now have exact log space wakeups everywhere we can assume the reason for this function was to paper over log space races in earlier XFS versions. Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
The only reason that xfs_log_space_wake had to do opportunistic wakeups was that the old xfs_log_move_tail calling convention didn't allow for exact wakeups when not updating the log tail LSN. Since this issue has been fixed we can do exact wakeups now. Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Currently xfs_log_move_tail has a tail_lsn argument that is horribly overloaded: it may contain either an actual lsn to assign to the log tail, 0 as a special case to use the last sync LSN, or 1 to indicate that no tail LSN assignment should be performed, and we should opportunisticly wake up at one task waiting for log space even if we did not move the LSN. Remove the tail lsn assigned from xfs_log_move_tail and make the two callers use xlog_assign_tail_lsn instead of the current variant of partially using the code in xfs_log_move_tail and partially opencoding it. Note that means we grow an addition lock roundtrip on the AIL lock for each bulk update or delete, which is still far less than what we had before introducing the bulk operations. If this proves to be a problem we can still add a variant of xlog_assign_tail_lsn that expects the lock to be held already. Also rename the remainder of xfs_log_move_tail to xfs_log_space_wake as that name describes its functionality much better. Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Mitsuo Hayasaka 提交于
This patch is a cleanup of quota check on disk blocks and inodes reservations, and changes it as follows. (1) add a total_count variable to store the total number of current usages and new reservations for disk blocks and inodes, respectively. (2) make it more readable to check if the local variables softlimit and hardlimit are positive. It has been changed as follows. if (softlimit > 0ULL) -> if (softlimit) if (hardlimit > 0ULL) -> if (hardlimit) This is because they are defined as xfs_qcnt_t which is unsigned. Signed-off-by: NMitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 22 2月, 2012 2 次提交
-
-
由 Mitsuo Hayasaka 提交于
The xfs checks quota when reserving disk blocks and inodes. In the block reservation, it checks if the total number of blocks including current usage and new reservation exceed quota. In the inode reservation, it checks using the total number of inodes including only current usage without new reservation. However, this inode quota check works well since the caller of xfs_trans_dquot() always sets the argument of the number of new inode reservation to 1 or 0 and inode is reserved one by one in current xfs. To make it more general, this patch changes it to the same way as the block quota check. Signed-off-by: NMitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com> (cherry picked from commit c922bbc8)
-
由 Mitsuo Hayasaka 提交于
In general, quota allows us to use disk blocks and inodes up to each limit, that is, they are available if they don't exceed their limitations. Current xfs sets their available ranges to lower than them except disk inode quota check. So, this patch changes the ranges to not beyond them. Signed-off-by: NMitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com> (cherry picked from commit 20f12d8a)
-
- 14 2月, 2012 1 次提交
-
-
由 Jesper Juhl 提交于
It looks to me like the two ASSERT()s in xfs_trans_add_item() really want to do a compare (==) rather than assignment (=). This patch changes it from the latter to the former. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NBen Myers <bpm@sgi.com> (cherry picked from commit 05293485)
-
- 11 2月, 2012 1 次提交
-
-
由 Christoph Hellwig 提交于
Stop reusing dquots from the freelist when allocating new ones directly, and implement a shrinker that actually follows the specifications for the interface. The shrinker implementation is still highly suboptimal at this point, but we can gradually work on it. This also fixes an bug in the previous lock ordering, where we would take the hash and dqlist locks inside of the freelist lock against the normal lock ordering. This is only solvable by introducing the dispose list, and thus not when using direct reclaim of unused dquots for new allocations. As a side-effect the quota upper bound and used to free ratio values in /proc/fs/xfs/xqm are set to 0 as these values don't make any sense in the new world order. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com> (cherry picked from commit 04da0c81)
-
- 04 2月, 2012 3 次提交
-
-
由 Chandra Seetharaman 提交于
Define new macro XFS_ALL_QUOTA_ACTIVE and simply some usage of quota macros. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Chandra Seetharaman 提交于
Change xfs_sb_from_disk() interface to take a mount pointer instead of a superblock pointer. This is to print mount point specific error messages in future fixes. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Chandra Seetharaman 提交于
Define a new function xfs_inode_dquot() that takes a inode pointer and a disk quota type and returns the quota pointer for the specified quota type. This simplifies the xfs_qm_dqget() error path significantly. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 03 2月, 2012 2 次提交
-
-
由 Chandra Seetharaman 提交于
Create a new function xfs_this_quota_on() that takes a xfs_mount data structure and a disk quota type and returns true if the specified type of quota is ON in the xfs_mount data structure. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Amit Sahrawat 提交于
Removing the macro, as this is no more needed in the code. Tried to find the reference when it was last used - but the usage for this seemed to have been dropped long time ago. Signed-off-by: NAmit Sahrawat <amit.sahrawat83@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 01 2月, 2012 2 次提交
-
-
由 Mitsuo Hayasaka 提交于
When a system tries to mount a filesystem (FS) using UUID, the xfs returns -EINVAL and shows a message if a FS with the same UUID has been already mounted. It is useful to output the duplicate UUID with it. Signed-off-by: NMitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Mitsuo Hayasaka 提交于
The kmem_realloc() in xfs is given KM_* memory allocation flags. And it allocates memory using kmalloc() after they are converted to gfp_mask flags. In xlog_recover_add_to_cont_trans(), 0u is passed to kmem_realloc(), instead of them. I guess it is preferred to use them, and here memory must be allocated but don't have to be done with GFP_ATOMIC. So, this patch changes it to KM_SLEEP. Signed-off-by: NMitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 26 1月, 2012 1 次提交
-
-
由 Jan Kara 提交于
Commit b52a360b forgot to call xfs_iunlock() when it detected corrupted symplink and bailed out. Fix it by jumping to 'out' instead of doing return. CC: stable@kernel.org CC: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: NJan Kara <jack@suse.cz> Reviewed-by: NAlex Elder <elder@kernel.org> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
-
- 20 1月, 2012 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/accounting, proc: Fix /proc/stat interrupts sum * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore x86/kprobes: Fix typo transferred from Intel manual * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits x86, tsc: Fix SMI induced variation in quick_pit_calibrate() x86, opcode: ANDN and Group 17 in x86-opcode-map.txt x86/kconfig: Move the ZONE_DMA entry under a menu x86/UV2: Add accounting for BAU strong nacks x86/UV2: Ack BAU interrupt earlier x86/UV2: Remove stale no-resources test for UV2 BAU x86/UV2: Work around BAU bug x86/UV2: Fix BAU destination timeout initialization x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode x86: Get rid of dubious one-bit signed bitfield
-