- 17 6月, 2012 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs compile warning fixes from Chris Mason. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: cast devid to unsigned long long for printk %llu Btrfs: init old_generation in get_old_root
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile update from Chris Metcalf: "This one-line bug fix unbreaks glibc robust mutexes (among other things no doubt), from code merged in during the 3.5 merge window but which we had been running internally at Tilera for almost a year." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: fix bug in get_user() for 4-byte values
-
git://github.com/schandinat/linux-2.6由 Linus Torvalds 提交于
Pull fbdev fixes from Florian Tobias Schandinat: - two fixes for s3c-fb by Jingoo Han (including a fix for a potential division by zero) - a couple of randconfig fixes by Arnd Bergmann - a cleanup for bfin_adv7393fb by Emil Goode * tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6: video: s3c-fb: fix possible division by zero in s3c_fb_calc_pixclk video: s3c-fb: clear SHADOWCON register when clearing hardware window registers drivers/tosa: driver needs I2C and SPI to compile drivers/savagefb: use mdelay instead of udelay video/console: automatically select a font video/ili9320: do not mark exported functions __devexit drivers/video: use correct __devexit_p annotation video: bfin_adv7393fb: Convert to kstrtouint_from_user
-
由 Chris Metcalf 提交于
The definition of 32-bit values in the 64-bit tilegx architecture is that they should be sign-extended regardless of whether they are considered signed or unsigned by the compiler. Accordingly, we need to use an "ld4s" rather than "ld4u" to load and sign-extend for get_user(). This fixes glibc bug 14238 (see http://sourceware.org/bugzilla), introduced during the 3.5 merge window. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 16 6月, 2012 17 次提交
-
-
由 Hugh Dickins 提交于
Minchan Kim reports that when a system has many swap areas, and tmpfs swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read back the page cannot locate it, and the read fails with -ENOMEM. Whoops. Yes, I blindly followed read_swap_header()'s pte_to_swp_entry( swp_entry_to_pte()) technique for determining maximum usable swap offset, without stopping to realize that that actually depends upon the pte swap encoding shifting swap offset to the higher bits and truncating it there. Whereas our radix_tree swap encoding leaves offset in the lower bits: it's swap "type" (that is, index of swap area) that was truncated. Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header(). This does not reduce the usable size of a swap area any further, it leaves it as claimed when making the original commit: no change from 3.0 on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB per swapfile on i386 with PAE. It's not a change I would have risked five years ago, but with x86_64 supported for ten years, I believe it's appropriate now. Hmm, and what if some architecture implements its swap pte with offset encoded below type? That would equally break the maximum usable swap offset check. Happily, they all follow the same tradition of encoding offset above type, but I'll prepare a check on that for next. Reported-and-Reviewed-and-Tested-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NHugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org [3.1, 3.2, 3.3, 3.4] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a couple of minor fixes, one for a preempt warning in the mpt2sas driver and one is a config failure with the new sd async domain." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Fix sd_probe_domain config problem [SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptible
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Fix a couple of mount regressions due to the recent cleanups. - Fix an Oops in the open recovery code - Fix an rpc_pipefs upcall hang that results from some of the net namespace work from 3.4.x (stable kernel candidate). - Fix a couple of write and o_direct regressions that were found at last weeks Bakeathon testing event in Ann Arbor." * tag 'nfs-for-3.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: add an endian notation for sparse NFSv4.1: integer overflow in decode_cb_sequence_args() rpc_pipefs: allow rpc_purge_list to take a NULL waitq pointer NFSv4 do not send an empty SETATTR compound NFSv2: EOF incorrectly set on short read NFS: Use the NFS_DEFAULT_VERSION for v2 and v3 mounts NFS: fix directio refcount bug on commit NFSv4: Fix unnecessary delegation returns in nfs4_do_open NFSv4.1: Convert another trivial printk into a dprintk NFS4: Fix open bug when pnfs module blacklisted NFS: Remove incorrect BUG_ON in nfs_found_client NFS: Map minor mismatch error to protocol not support error. NFS: Fix a commit bug NFS4: Set parsed mount data version to 4 NFSv4.1: Ensure we clear session state flags after a session creation NFSv4.1: Convert a trivial printk into a dprintk NFSv4: Fix up decode_attr_mdsthreshold NFSv4: Fix an Oops in the open recovery code NFSv4.1: Fix a request leak on the back channel
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Pull DMA-mapping fixes from Marek Szyprowski: "A set of minor fixes for dma-mapping code (ARM and x86) required for Contiguous Memory Allocator (CMA) patches merged in v3.5-rc1." * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: x86: dma-mapping: fix broken allocation when dma_mask has been provided ARM: dma-mapping: fix debug messages in dmabounce code ARM: mm: fix type of the arm_dma_limit global variable ARM: dma-mapping: Add missing static storage class specifier
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
Pull PowerPC fix from Paul Mackerras: "Just one commit, and a one-liner at that, but an important one; without it hard_irq_disable() does nothing on powerpc." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: Make hard_irq_disable() actually hard-disable interrupts
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull two nfsd bugfixes from J. Bruce Fields. * 'for-3.5' of git://linux-nfs.org/~bfields/linux: nfsd4: BUG_ON(!is_spin_locked()) no good on UP kernels NFS: hard-code init_net for NFS callback transports
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull five Xen bug-fixes from Konrad Rzeszutek Wilk: - When booting as PVHVM we would try to use PV console - but would not validate the parameters causing us to crash during restore b/c we re-use the wrong event channel. - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge and tried to use it. - Under AMD machines would advertise the APERFMPERF resulting in needless amount of MSRs from the guest. - A global value (xen_released_pages) was not subtracted at bootup when pages were added back in. This resulted in the balloon worker having the wrong account of how many pages were truly released. - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback. * tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: mark local pages as FOREIGN in the m2p_override xen/setup: filter APERFMPERF cpuid feature out xen/balloon: Subtract from xen_released_pages the count that is populated. xen/pci: Check for PCI bridge before using it. xen/events: Add WARN_ON when quick lookup found invalid type. xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness. xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN xen/hvc: Collapse error logic.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of tiny fixes for the USB core and drivers for 3.5-rc3 A bunch of gadget fixes, and new device ids, as well as some fixes for a number of different regressions that have been reported recently. We also fixed some PCI host controllers to resolve a long-standing bug with a whole class of host controllers that have been plaguing people for a number of kernel releases, preventing their systems from suspending properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (41 commits) USB: fix gathering of interface associations usb: ehci-sh: fix illegal phy_init() running when platform_data is NULL usb: cdc-acm: fix devices not unthrottled on open Fix OMAP EHCI suspend/resume failure (i693) USB: ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused usb: use usb_serial_put in usb_serial_probe errors USB: EHCI: Fix build warning in xilinx ehci driver USB: fix PS3 EHCI systems xHCI: Increase the timeout for controller save/restore state operation xhci: Don't free endpoints in xhci_mem_cleanup() xhci: Fix invalid loop check in xhci_free_tt_info() xhci: Fix error path return value. USB: Checking the wrong variable in usb_disable_lpm() usb-storage: Add 090c:1000 to unusal-devs USB: serial-generic: use a single set of device IDs USB: serial: Enforce USB driver and USB serial driver match USB: add NO_D3_DURING_SLEEP flag and revert 151b6128 USB: option: add more YUGA device ids USB: mos7840: Fix compilation of usb serial driver USB: option: fix memory leak ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide由 Linus Torvalds 提交于
Pull IDE fixes from David S. Miller: 1) Two fixes to icside, one for a build failure and another for a warning. From Christian Dietrich. 2) Fix a bit operation that did erroneous masking, from Julia Lawall. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: drivers/ide/ide-cs.c: adjust suspicious bit operation ide: icside.c: fix printk format string compile warning ide: icside.c: Fix compile with CONFIG_BLK_DEV_IDEDMA_ICS=n
-
由 Chris Mason 提交于
Avoid warning in 32 bit machines Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc update from David S. Miller: "This just removes some sparc headers that were never, ever, used." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove two unused headers
-
由 Chris Mason 提交于
gcc was giving an uninit variable warning here. Strictly speaking we don't need to init it, but this will make things much less error prone. Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Fix topology checks on AMD MCM CPUs x86/mm: Fix some kernel-doc warnings x86, um: Correct syscall table type attributes breaking gcc 4.8
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: watchdog: Quiet down the boot messages perf/x86: Fix broken LBR fixup code tracing: Have tracing_off() actually turn tracing off
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull core updates (RCU and locking) from Ingo Molnar: "Most of the diffstat comes from the RCU slow boot regression fixes, but there's also a debuggability improvements/fixes." * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: memblock: Document memblock_is_region_{memory,reserved}() rcu: Precompute RCU_FAST_NO_HZ timer offsets rcu: Move RCU_FAST_NO_HZ per-CPU variables to rcu_dynticks structure rcu: Update RCU_FAST_NO_HZ tracing for lazy callbacks rcu: RCU_FAST_NO_HZ detection of callback adoption spinlock: Indicate that a lockup is only suspected kdump: Execute kmsg_dump(KMSG_DUMP_PANIC) after smp_send_stop() panic: Make panic_on_oops configurable
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull target updates from Nicholas Bellinger: "This series contains post merge qla_target.c / tcm_qla2xxx bugfixes from the past weeks, including the patch to allow target-core to use an optional session shutdown callback to help address an active I/O shutdown bug in tcm_qla2xxx code (Joern). Also included is a target regression bugfix releated to explict ALUA target port group CDB emulation that is CC'ed to stable (Roland)." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: Remove version.h header file inclusion tcm_qla2xxx: Handle malformed wwn strings properly tcm_qla2xxx: tcm_qla2xxx_handle_tmr() can be static qla2xxx: Don't leak commands we give up on in qlt_do_work() qla2xxx: Don't crash if we can't find cmd for failed CTIO tcm_qla2xxx: Don't insert nacls without sessions into the btree target: Return error to initiator if SET TARGET PORT GROUPS emulation fails tcm_qla2xxx: Clear session s_id + loop_id earlier during shutdown tcm_qla2xxx: Convert to TFO->put_session() usage target: Add TFO->put_session() caller for HW fabric session shutdown
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs update from Chris Mason: "The dates look like I had to rebase this morning because there was a compiler warning for a printk arg that I had missed earlier. These are all fixes, including one to prevent using stale pointers for device names, and lots of fixes around transaction abort cleanups (Josef, Liu Bo). Jan Schmidt also sent in a number of fixes for the new reference number tracking code. Liu Bo beat me to updating the MAINTAINERS file. Since he thought to also fix the git url, I kept his commit." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits) Btrfs: update MAINTAINERS info for BTRFS FILE SYSTEM Btrfs: destroy the items of the delayed inodes in error handling routine Btrfs: make sure that we've made everything in pinned tree clean Btrfs: avoid memory leak of extent state in error handling routine Btrfs: do not resize a seeding device Btrfs: fix missing inherited flag in rename Btrfs: fix incompat flags setting Btrfs: fix defrag regression Btrfs: call filemap_fdatawrite twice for compression Btrfs: keep inode pinned when compressing writes Btrfs: implement ->show_devname Btrfs: use rcu to protect device->name Btrfs: unlock everything properly in the error case for nocow Btrfs: fix btrfs_destroy_marked_extents Btrfs: abort the transaction if the commit fails Btrfs: wake up transaction waiters when aborting a transaction Btrfs: fix locking in btrfs_destroy_delayed_refs Btrfs: pass locked_page into extent_clear_unlock_delalloc if theres an error Btrfs: fix race in tree mod log addition Btrfs: add btrfs_next_old_leaf ...
-
- 15 6月, 2012 18 次提交
-
-
由 Liu Bo 提交于
Update to the latest btrfs's maintainer mail and git repo. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
the items of the delayed inodes were forgotten to be freed, this patch fixes it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
Since we have two trees for recording pinned extents, we need to go through both of them to make sure that we've done everything clean. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
We've forgotten to clear extent states in pinned tree, which will results in space counter mismatch and memory leak: WARNING: at fs/btrfs/extent-tree.c:7537 btrfs_free_block_groups+0x1f3/0x2e0 [btrfs]() ... space_info 2 has 8380416 free, is not full space_info total=12582912, used=4096, pinned=4096, reserved=0, may_use=0, readonly=4194304 btrfs state leak: start 29364224 end 29376511 state 1 in tree ffff880075f20090 refs 1 ... Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
Seeding devices are not supposed to change any more. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
When we move a file into a directory with compression flag, we need to inherite BTRFS_INODE_COMPRESS and clear BTRFS_INODE_NOCOMPRESS as well. But if we move a file into a directory without compression flag, we need to clear both of them. It is the way how our setflags deals with compression flag, so keep the same behaviour here. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
-
由 Paul Mackerras 提交于
At present, hard_irq_disable() does nothing on powerpc because of this code in include/linux/interrupt.h: #ifndef hard_irq_disable #define hard_irq_disable() do { } while(0) #endif So we need to make our hard_irq_disable be a macro. It was previously a macro until commit 7230c564 ("powerpc: Rework lazy-interrupt handling") changed it to a static inline function. Cc: stable@vger.kernel.org Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org> -- arch/powerpc/include/asm/hw_irq.h | 3 +++ 1 file changed, 3 insertions(+)
-
由 Li Zefan 提交于
It's a bug, but it happens to work, as BTRFS_COMPRESS_LZO == 2, which has only one bit set. Signed-off-by: NLi Zefan <lizefan@huawei.com>
-
由 Li Zefan 提交于
If a file has 3 small extents: | ext1 | ext2 | ext3 | Running "btrfs fi defrag" will only defrag the last two extents, if those extent mappings hasn't been read into memory from disk. This bug was introduced by commit 17ce6ef8 ("Btrfs: add a check to decide if we should defrag the range") The cause is, that commit looked into previous and next extents using lookup_extent_mapping() only. While at it, remove the code that checks the previous extent, since it's sufficient to check the next extent. Signed-off-by: NLi Zefan <lizefan@huawei.com>
-
由 Josef Bacik 提交于
I removed this in an earlier commit and I was wrong. Because compression can return from filemap_fdatawrite() without having actually set any of it's pages as writeback() it can make filemap_fdatawait() do essentially nothing, and then we won't find any ordered extents because they may not have been created yet. So not only does this make fsync() completely useless, but it will also screw up if you truncate on a non-page aligned offset since we zero out the end and then wait on ordered extents and then call drop caches. We can drop the cache before the io completes and then we try to unpin the extent we just wrote we won't find it and everything goes sideways. So fix this by putting it back and put a giant comment there to keep me from trying to remove it in the future. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
A user reported lots of problems using compression on the new code and it turns out part of the problem was that igrab() was failing when we added a new ordered extent. This is because when writing out an inode under compression we immediately return without actually doing anything to the pages, and then in another thread at some point down the line actually do the ordered dance. The problem is between the point that we start writeback and we actually add the ordered extent we could be trying to reclaim the inode, which makes igrab() return NULL. So we need to do an igrab() when we create the async extent and then drop it when we are done with it. This makes sure we stay pinned in memory until the ordered extent can get a reference on it and we are good to go. With this patch we no longer panic in btrfs_finish_ordered_io(). Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
Because btrfs can remove the device that was mounted we need to have a ->show_devname so that in this case we can print out some other device in the file system to /proc/mount. So if there are multiple devices in a btrfs file system we will just print the device with the lowest devid that we can find. This will make everything consistent and deal with device removal properly. The drawback is if you mount with a device that is higher than the lowest devicd it won't show up as the mounted device in /proc/mounts, but this is a small price to pay. This was inspired by Miao Xie's patch. Thanks, Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
I was getting hung on umount when a transaction was aborted because a range of one of the free space inodes was still locked. This is because the nocow stuff doesn't unlock anything on error. This fixed the problem and I verified that is what was happening. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
So we're forcing the eb's to have their ref count set to 1 so invalidatepage works but this breaks lots of things, for example root nodes, and is just plain wrong, we don't need to just evict all of this stuff. Also drop the invalidatepage altogether and add a page_cache_release(). With this patch we no longer hang when trying to access the root nodes after an aborted transaction and we no longer leak memory. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
If a transaction commit fails we don't abort it so we don't set an error on the file system. This patch fixes that by actually calling the abort stuff and then adding a check for a fs error in the transaction start stuff to make sure it is caught properly. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
I was getting lots of hung tasks and a NULL pointer dereference because we are not cleaning up the transaction properly when it aborts. First we need to reset the running_transaction to NULL so we don't get a bad dereference for any start_transaction callers after this. Also we cannot rely on waitqueue_active() since it's just a list_empty(), so just call wake_up() directly since that will do the barrier for us and such. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-