1. 13 5月, 2008 11 次提交
  2. 12 5月, 2008 29 次提交
    • H
      types: s390: fix #ifdef reversal in <asm-s390/types.h> · 2ccdcfee
      H. Peter Anvin 提交于
      The #ifdef for the integer types was reversed; the standard pattern in
      these files are:
      
      #ifndef __s390x__
      /* 32-bit code */
      #else
      /* 64-bit code */
      #endif
      
      Stick with the original pattern, but make sure the 32-bit code
      actually comes first!
      
      Reported by Al Viro.
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      2ccdcfee
    • S
      cb0e8b0f
    • T
      [MIPS] Fix build failure in mips oprofile code · 005ca9a3
      Thiemo Seufer 提交于
      This patch fixes a warning-as-error induced build failure of 64bit MIPS
      kernels.
      Signed-off-by: NThiemo Seufer <ths@networkno.de>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      005ca9a3
    • T
      [MIPS] fix warning message on SMP kernels · 83738e30
      Thiemo Seufer 提交于
      This patch fixes a (harmless) warning message.
      Signed-off-by: NThiemo Seufer <ths@networkno.de>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      83738e30
    • A
      [MIPS] markeins: build fix · b01273f1
      Adrian Bunk 提交于
      This patch fixes the following build errror caused by
      commit 7dffa3c6
      (ntp: handle leap second via timer):
      
      <--  snip  -->
      
      ...
        CC      arch/mips/emma2rh/markeins/setup.o
      /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/emma2rh/markeins/setup.c:79: error: conflicting types for 'clock'
      /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/clocksource.h:96: error: previous declaration of 'clock' was here
      make[2]: *** [arch/mips/emma2rh/markeins/setup.o] Error 1
      
      <--  snip  -->
      
      [Ralf: reformated to 80 colums after the fix and marked emma2rh_clock as
      __initdata]
      Signed-off-by: NAdrian Bunk <bunk@kernel.org>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      b01273f1
    • C
    • R
      [MIPS] Get rid of __ilog2 · ddc0d009
      Ralf Baechle 提交于
      56a6b1eb was a bit too conservative and
      left __ilog2 around which is only used as an internal function for other
      bitops.
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      ddc0d009
    • T
      [MIPS] Fix __fls for non-MIPS32/MIPS64 cpus · fcd84f2f
      Thomas Bogendoerfer 提交于
      Only MIPS32 and MIPS64 CPUs implement clz/dclz. Therefore don't export
      __ilog2() for non MIPS32/MIPS64 cpus and use generic __fls bitop code for
      these cpus.
      Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      fcd84f2f
    • S
      [MIPS] XXS1500 code style cleanup · 7ff83f21
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - remove needless parentheses;
      
      - remove unneeded numeric literal type cast;
      
      - insert spaces between operator and its operands;
      
      - remove excess new lines;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the structure initializer;
      
      - fix typos, capitalize acronyms, etc. in the comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      7ff83f21
    • S
      [MIPS] MTX-1 code style cleanup · 1ff1a78c
      Sergei Shtylyov 提交于
      Fix many errors and warnings given by checkpatch.pl:
      
      - space after opening and before closing parentheses;
      
      - use of C99 // comments;
      
      - leading spaces instead of tabs;
      
      - brace not on the same line with 'else' in the 'if' statement;
        statement;
      
      - printk() without KERN_* facility level;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      - including <asm/gpio.h> instead of <linux/gpio.h>.
      
      In addition to these changes, also do the following:
      
      - insert spaces between operator and its operands;
      
      - replace tab between the function type and name with space in
        mtx1_pci_idsel() declaration;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the array/structure
        initializers;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      1ff1a78c
    • S
      [MIPS] Pb1200/DBAu1200 code style cleanup · c3d1d5c8
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - initialization of a 'static' variable to 0;
      
      - space after opening and before closing parentheses;
      
      - missing space between 'for' and opening parenthesis;
      
      - macros with complex values not enclosed in parentheses;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - using simple_strtol() where strict_strtol() could be used;
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - mention DBAu1200 board in the Makefile;
      
      - replace the group of #include/#ifdef directives by a single
        #include <au1xxx.h> since this header contains the needed stuff;
      
      - properly indent the blocks;
      
      - insert spaces between operator and its operands, remove excess spaces
        there;
      
      - remove needless parentheses and add some for clarity;
      
      - replace numeric literals/expressions with the matching macros;
      
      - remove space after the type cast's closing parenthesis;
      
      - reduce pb1200_setup_cascade() to the single 'return' statement;
      
      - reduce the number of printed empty lines in the so-called CPLD
        workaround;
      
      - remove #undef AU1X00_EXTERNAL_INT since that macro is not defined
        anywhere;
      
      - replace spaces after the macro name with tabs in the #define directives;
      
      - remove excess tabs after the macro name in the #define directives;
      
      - fix typo in the BCSR_RESETS_PWMR1mUX macro's name;
      
      - group all Pb1200 PCMCIA definitions together;
      
      - put the function's result type and name/parameters on the same line;
      
      - insert missing and remove excess new lines;
      
      - make the multi-line comment style consistent with the kernel style
        elsewhere by adding empty first line and/or adding space/asterisk on
        their left side;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - combine some comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      c3d1d5c8
    • S
      [MIPS] Pb1550 code style cleanup · 6afabe6c
      Sergei Shtylyov 提交于
      Fix a few errors and warnings given by checkpatch.pl:
      
      - macros with complex values not enclosed in parentheses;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - replace numeric literals with the matching macros;
      
      - properly indent the code and the array initializers;
      
      - insert spaces between operator and its operands, also remove excess spaces
        there;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the array initializers;
      
      - replace spaces after the macro name with tabs in the #define directives, also
        sometimes insert space there for better looks;
      
      - remove excess tabs after the macro name in the #define directives;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first line;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      6afabe6c
    • S
      [MIPS] Pb1500 code style cleanup · 2091a17f
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - replace numeric literals/expressions with the matching macros;
      
      - insert spaces between operator and its operands;
      
      - properly indent the code and the array initializers;
      
      - remove useless #if dirctive from board_setup();
      
      - remove needless parentheses;
      
      - remove unneeded type casts;
      
      - remove excess new lines;
      
      - make hexadecimal literals all lower case;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the array initializers;
      
      - replace spaces after the macro name with tabs in the #define directives,
        also sometimes insert space there for better looks;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      2091a17f
    • S
      [MIPS] Pb1100 code style cleanup · be1c3c1e
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - space between asterisk and variable name;
      
      - use of C99 // comments;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - properly indent the code;
      
      - remove space after the type cast's closing parenthesis;
      
      - replace numeric literals/expressions with the matching macros;
      
      - replace spaces after the macro name with tabs in the #define directives,
        and sometimes insert spaces there;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - make the multi-line comment style consistent with the kernel style
        elsewhere by adding empty first line;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      be1c3c1e
    • S
      [MIPS] Pb1000 code style cleanup · 7916c354
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - brace not on the same line with condition in the 'switch' statement;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - properly indent the 'switch' statement;
      
      - remove needless parentheses;
      
      - insert spaces between operator and its operands;
      
      - replace numeric literals/expressions with the matching macros;
      
      - remove useless #if dirctive from board_setup();
      
      - remove unneeded numeric literal type casts;
      
      - remove space after the type cast's closing parenthesis;
      
      - replace spaces after the macro name with tabs in the #define directives, and
        sometimes insert spaces there;
      
      - remove excess new lines;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first/last line;
      
      - combine some comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      7916c354
    • S
      [MIPS] DBAu1xx0 code style cleanup · abd14cc0
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - macros with complex values not enclosed in parentheses;
      
      - leading spaces instead of tabs;
      
      - printk() without KERN_* facility level;
      
      - using simple_strtol() where strict_strtol() could be used;
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - initialize variable instead of assigning value later where it makes sense;
      
      - insert spaces between operator and its operands, also remove excess spaces
        there;
      
      - remove unneeded numeric literal type casts;
      
      - remove needless parentheses;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the array initializers;
      
      - replace spaces after the macro name with tabs in the #define directives;
      
      - remove excess tabs after the macro name in the #define directives;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first/last line;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      abd14cc0
    • S
      [MIPS] Alchemy PCI code style cleanup · a9633279
      Sergei Shtylyov 提交于
      Fix 15 errors and 4 warnings given by checkpatch.pl:
      
      - space between the asterisk and variable name;
      
      - space after opening and before closing parentheses;
      
      - leading spaces instead of tabs;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - combine the nested 'if' statements into one when possible;
      
      - remove needless parentheses;
      
      - add missing and remove excess spaces between operator and its operands;
      
      - fix printk() format specifiers mismatching the argument types;
      
      - put the function's result type and name/parameters on the same line;
      
      - insert missing and remove excess new lines;
      
      - properly indent multi-line expressions;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first line;
      
      - fix typos, capitalize acronyms, etc. in the comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      a9633279
    • S
      [MIPS] Alchemy common code style cleanup · c1dcb14e
      Sergei Shtylyov 提交于
      Fix many errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - missing space between the type and asterisk in a variable declaration;
      
      - space between the asterisk and function/variable name;
      
      - leading spaces instead of tabs;
      
      - space after opening and before closing parentheses;
      
      - initialization of a 'static' variable to 0;
      
      - missing spaces around assignement/comparison operator;
      
      - brace not on the same line with condition (or 'else') in the 'if'/'switch'
        statement;
      
      - missing space between 'if'/'for'/'while' and opening parenthesis;
      
      - use of assignement in 'if' statement's condition;
      
      - printk() without KERN_* facility level;
      
      - EXPORT_SYMBOL() not following its function immediately;
      
      - unnecessary braces for single-statement block;
      
      - adding new 'typedef' (where including <linux/types.h> will do);
      
      - use of 'extern' in the .c file (where it can be avoided by including header);
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - insert missing space after opening brace and/or before closing brace in the
        structure initializers;
      
      - insert spaces between operator and its operands;
      
      - put the function's result type and name/parameters on the same line;
      
      - properly indent multi-line expressions;
      
      - remove commented out code;
      
      - remove useless initializers and code;
      
      - remove needless parentheses;
      
      - fix broken/excess indentation;
      
      - add missing spaces between operator and its operands;
      
      - insert missing and remove excess new lines;
      
      - group 'else' and 'if' together where possible;
      
      - make au1xxx_platform_init() 'static';
      
      - regroup variable declarations in pm_do_freq() for prettier look;
      
      - replace numeric literals with the matching macros;
      
      - fix printk() format specifiers mismatching the argument types;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first line and/or adding space on their left side;
      
      - make two-line comments that only have one line of text one-line;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - fix/remove obsolete references in the comments;
      
      - reformat some comments;
      
      - add comment about the CPU:counter clock ratio to calc_clock();
      
      - update MontaVista copyright;
      
      - remove Pete Popov's and Steve Longerbeam's old email addresses...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      c1dcb14e
    • S
      [MIPS] Alchemy common headers style cleanup · ff6814d5
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - space after opening and before closing parentheses;
      
      - opening brace following 'struct' not on the same line;
      
      - leading spaces instead of tabs;
      
      - use of C99 // comments;
      
      - macros with complex values not enclosed in parentheses;
      
      - missing space between the type and asterisk in a variable declaration;
      
      - space between asterisk and function name;
      
      - including <asm/io.h> instead of <linux/io.h> and <asm/irq.h> instead of
        <linux/irq.h>;
      
      - use of '__inline__' instead of 'inline';
      
      - space between function name and opening parenthesis;
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - remove needless parentheses;
      
      - insert spaces between operator and its operands;
      
      - replace spaces after the macro name with tabs in the #define directives and
        after the type in the structure field declarations;
      
      - remove excess tabs after the macro name in the #define directives and in the
        'extern' variable declarations;
      
      - remove excess spaces between # and define for the SSI_*_MASK macros to align
        with other such macros;
      
      - put '||' operator on the same line with its first operand;
      
      - properly indent multi-line function prototypes;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first line and/or adding space/asterisk on their left side;
      
      - make two-line comments that only have one line of text one-line;
      
      - convert the large multi-line comment in au1xxx_ide.h into several one-liners,
        replace spaces with tabs there;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - insert missing and remove excess new lines;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's and Steve Longerbeam's old email addresses...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      ff6814d5
    • R
      [MIPS] Add empty argument parenthesis to GCC_IMM_ASM · ad1d77a3
      Ralf Baechle 提交于
      This is to clarify that GCC_IMM_ASM does not take an argument as the
      context of the macro's invocation seems to imply.
      
      As suggested by Maciej W. Rozycki (macro@linux-mips.org).
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      ad1d77a3
    • J
      [MIPS] msp_hwbutton.c: minor irq handler cleanups · 1c9e919f
      Jeff Garzik 提交于
      - remove always-true test
      
      - neaten request_irq() indentation
      
      This change's main purpose is to prepare for the patchset in
      jgarzik/misc-2.6.git#irq-remove, that explores removal of the
      never-used 'irq' argument in each interrupt handler.
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      1c9e919f
    • A
      [MIPS] unexport __kmap_atomic_to_page · a6406304
      Adrian Bunk 提交于
      This patch removes the no longer used export of __kmap_atomic_to_page.
      Signed-off-by: NAdrian Bunk <bunk@kernel.org>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      a6406304
    • R
      [MIPS] Initialize max_pfn again. · dc3bf353
      Ralf Baechle 提交于
      This was dropped by
      
      commit a0d9e2d891e4cf54676c430da63bd4a17d1cdb80 (lmo)
      commit b6f1f0de (ko)
      Author: Franck Bui-Huu <vagabon.xyz@gmail.com>
      Date:   Fri Aug 11 17:51:48 2006 +0200
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      dc3bf353
    • R
      [MIPS] IRIX: Handle do_brk() error return correctly. · f4324f3e
      Ralf Baechle 提交于
      do_brk's return value was stored in an unsigned long variable before being
      tested for less than zero making the test always fail.  Also do_brk's
      called irix_map_prda_page wasn't forwarding do_brk() success.
      
      Bug checking the return value of do_brk() and initial fix for it found
      by Roel Kluin <12o3l@tiscali.nl>.
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      f4324f3e
    • K
    • R
      [MIPS] Don't use max_pfn which is no longer initialized these days. · 9f2546ad
      Ralf Baechle 提交于
      Still won't play nicely with esotheric configurations such as discontig
      memory ...
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      9f2546ad
    • R
      d0e7ba06
    • K
    • S
      [MIPS] Alchemy: SMBus resource fix · 8e07c2c6
      Sergei Shtylyov 提交于
      The Alchemy platform code registers the SMBus device using the virtual
      address of its registers instead of the physical one -- fix this, taking
      into account that actually the whole megabyte is decoded by any of the
      programmable serial controllers (one of which is SMBus), and that all the
      Alchemy peripherals are directly mappable into KSEG1 kernel space and
      therefore ioremap() call would just boil down to CKSEG1ADDR() invocation.
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      8e07c2c6