- 19 3月, 2017 7 次提交
-
-
由 Quinn Tran 提交于
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Anil Gurumurthy 提交于
Signed-off-by: NAnil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Add routines to support T10 DIF tag. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NAnil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Joe Carnuccio 提交于
Cc: <stable@vger.kernel.org> Signed-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 09 2月, 2017 7 次提交
-
-
由 Joe Carnuccio 提交于
This patch simplifies SRB structure usage in driver. - Simplify sp->done() and sp->free() interfaces. - Remove sp->fcport->vha to use vha pointer from sp. - Use sp->vha context in qla2x00_rel_sp(). Signed-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Current code blindly does State Change Registration when the link is up. Move SCR behind fabric scan, so that arbitrated loop scan would not get erroneous error message. Some of the other improvements are as follows - Add session deletion for TPRLO and send acknowledgment for TPRLO. - Enable FW option to move ABTS, RIDA & PUREX from RSPQ to ATIOQ. - Save NPort ID early in link init. - Move ABTS & RIDA to ATIOQ helps in keeping command ordering and link up sequence ordering. - Save Nport ID and update VP map so that SCSI CMD/ATIO won't be dropped. - fcport alloc does the initializes memory to zero. Remove memset to zero since It might corrupt link list. - Turn off Registration for State Change MB in loop mode. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Himanshu Madhani 提交于
With support for dual mode in the driver, this mode becomes dead code. Remove reverse_ini_mode from code. Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Add switch to allow both Initiator Mode & Target mode to operate at the same time. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Current code merges qla_tgt_sess and fc_port structure into single fc_port structure representing same I-T nexus. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling of patch description ] Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 18 1月, 2017 1 次提交
-
-
由 Quinn Tran 提交于
Corrupted ATIO is defined as length of fcp_header & fcp_cmd payload is less than 0x38. It's the minimum size for a frame to carry 8..16 bytes SCSI CDB. The exchange will be dropped or terminated if corrupted. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> [ bvanassche: Fixed spelling in patch title ] Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
-
- 12 1月, 2017 2 次提交
-
-
由 Christoph Hellwig 提交于
Now that qla2xxx uses the IRQ layer affinity assignment, affinity won't change over the life time of a device and the notifiers are useless. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Christoph Hellwig 提交于
The first two or three vectors in qla2xxx adapter are global and not associated with a specific queue. They should not have IRQ affinity assigned. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 10 1月, 2017 1 次提交
-
-
由 Colin Ian King 提交于
Rename the vendor_indentifer and hba_indentifer fields to correct spelling. Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 15 12月, 2016 3 次提交
-
-
由 Quinn Tran 提交于
- Fix race condition between dpc_thread accessing Multiqueue resources and qla2x00_remove_one thread trying to free resource. - Fix out of order free for Multiqueue resources. Also, Multiqueue interrupts needs a workqueue. Interrupt needed to stop before the wq can be destroyed. Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Michael Hernandez 提交于
Replaced existing multiple queue functionality with framework that allows for the creation of pairs of request and response queues, either at start of day or dynamically. Queue pair creation depend on module parameter "ql2xmqsupport", which need to be enabled to create queue pair. Signed-off-by: NSawan Chandak <sawan.chandak@cavium.com> Signed-off-by: NMichael Hernandez <michael.hernandez@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Michael Hernandez 提交于
Replaces the old pci_enable_msi[x]* and pci_disable_msi[x] calls. Signed-off-by: NMichael Hernandez <michael.hernandez@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 18 11月, 2016 1 次提交
-
-
由 Johannes Thumshirn 提交于
Change FC drivers to use 'struct bsg_job' from bsg-lib.h instead of 'struct fc_bsg_job' from scsi_transport_fc.h and remove 'struct fc_bsg_job'. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Acked-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 15 9月, 2016 1 次提交
-
-
由 Christoph Hellwig 提交于
Instead of defining a local version of it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 16 7月, 2016 6 次提交
-
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sawan Chandak 提交于
During hot swap of PCI device, there can be PCI error on device, during normal driver unload. The race between normal driver unload and driver unload due to PCI error, can lead to system crash.Fix is to check if there is unload going on and allow that function to unload the driver. Signed-off-by: NSawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Joe Carnuccio 提交于
Properly initialize IO statistics to avoid initial 0xFFFFFFF (-1) values. Cleanup/simplify usage of pointer to statistics structure. Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 11 3月, 2016 1 次提交
-
-
由 Quinn Tran 提交于
#cat /sys/kernel/debug/qla2xxx/qla2xxx_31/tgt_sess qla2xxx_31 Port ID Port Name Handle ff:fc:01 21:fd:00:05:33:c7:ec:16 0 01:0e:00 21:00:00:24:ff:7b:8a:e4 1 01:0f:00 21:00:00:24:ff:7b:8a:e5 2 .... (Drop ->check_initiator_node_acl() parameter usage - nab) Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 24 2月, 2016 3 次提交
-
-
由 Harish Zunjarrao 提交于
Signed-off-by: NHarish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sawan Chandak 提交于
Signed-off-by: NSawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sawan Chandak 提交于
Signed-off-by: NSawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 08 1月, 2016 7 次提交
-
-
由 Quinn Tran 提交于
set ATIO/Request/Response Queues and Default number of outstanding command to 4k. Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
99% of the time the ATIOQ has SCSI command. The other 1% of time is something else. Most of the time this interrupt does not need to hold the hardware_lock. We're moving the ATIO interrupt thread to a different lock to reduce lock contention. Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Register to receive notification of when irq setting change occured. Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Sessions management (add, deleted, modify) currently are serialized through the hardware_lock. Hardware_lock is a high traffic lock. This lock is accessed by both the transmit & receive sides. Sessions management is now moved off to another lock call sess_lock. This is done to reduce lock contention and increase traffic throughput. Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Alexei Potashnik 提交于
Until now ack'ing of a new PLOGI has only been delayed if there was an existing session for the same WWN. Ack was released when the session deletion completed. If there was another WWN session with the same fc_id/loop_id pair (aka "conflicting session"), PLOGI was still ack'ed immediately. This potentially caused a problem when old session deletion logged fc_id/loop_id out of FW after new session has been established. Two work-arounds were attempted before: 1. Dropping PLOGIs until conflicting session goes away. 2. Detecting initiator being logged out of FW and issuing LOGO to force re-login. This patch introduces proper solution to the problem where PLOGI is held until either existing session with same WWN or any conflicting session goes away. Mechanism supports one session holding two PLOGI acks as well as one PLOGI ack being held by many sessions. Signed-off-by: NAlexei Potashnik <alexei@purestorage.com> Acked-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Alexei Potashnik 提交于
1. Initiator A is logged in with fc_id(1)/loop_id(1) 2. Initiator A re-logs in with fc_id(2)/loop_id(2) 3. Part of old session deletion async logoout for 1/1 is queued 4. Initiator B logs in with fc_id(1)/loop_id(1), starts passing data and creates session. 5. Async logo from 3 is processed by DPC and sent to FW Now initiator B has the session but is logged out from FW. This condition is detected first with CTIO error 29 at which point we should delete current session. During session deletion we will send LOGO to initiator to force re-login. Under rare circumstances initiator might be logged out of FW, not have driver session, but still think it's logged in. E.g. the above sequence plus session deletion due to re-config. Incoming commands will fail to create local session because initiator is not found in FW. In this case we also issue LOGO to initiator to force him re-login. Finally this patch fixes exchange leak when commands where received in logged out state. In this case loop_id must be set to FFFF when corresponding exchange is terminated. The patch modifies exchange termination to always use FFFF, since in certain scenarios it's impossible to tell whether command was received in logged in or logged out state. Signed-off-by: NAlexei Potashnik <alexei@purestorage.com> Acked-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Himanshu Madhani 提交于
This patch adds interface to send explicit LOGO explicit LOGO using using ELS commands from driver. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-