When transitioning away from vgacon the system tries to save the
current contents of the VGA memory, so that it can be cleanly handed
off to fbcon (or whatever comes afterwards).

The recent change

 commit 81b5c7bc
 Author: Alex Williamson <alex.williamson@redhat.com>
 Date:   Wed Aug 28 09:39:08 2013 -0600

    i915: Update VGA arbiter support for newer devices

caused i915 to disable VGA memory decode for the IGD when i915 is
initializing. Unfortunately that happens before the vgacon->fbcon
handoff so vgacon_save_screen() will read out all ones from the
VGA memory.

After the handoff fbcon will inherit the bogus state from vgacon,
and pre-fills the fb with matching contents. The end result is
a white rectangle in the top left corner of the screen, the size
of which matches the now inactive VGA console.

To remedy the situation delay the disabling of VGA memory until
the vgacon->fbcon handoff has happened.

Also rename i915_enable_vga to i915_enable_vga_mem to make
the relationship between these functions clearer.

Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ACPI has _BCM and _BQC methods to set and query the backlight
brightness, respectively. The ACPI opregion has variables BCLP and CBLV
to hold the requested and current backlight brightness, respectively.

The BCLP variable has range 0..255 while the others have range
0..100. This means the _BCM method has to scale the brightness for BCLP,
and the gfx driver has to scale the requested value back for CBLV. If
the _BQC method uses the CBLV variable (apparently some implementations
do, some don't) for current backlight level reporting, there's room for
rounding errors.

Use DIV_ROUND_UP for scaling back to CBLV to get back to the same values
that were passed to _BCM, presuming the _BCM simply uses bclp = (in *
255) / 100 for scaling to BCLP.

Reference: https://gist.github.com/aaronlu/6314920Reported-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NAaron Lu <aaron.lu@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Once again we find that Valleyview is ever so subtlety different from
the rest of its gen7 brethen. In this case, Valleyview has no support
for pageflipping from the RCS ring.

Fixes a regression from

commit ffe74d75
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Aug 26 20:58:12 2013 +0100

    drm/i915: Use RCS flips on Ivybridge+
Reported-by: N"Lee, Chon Ming" <chon.ming.lee@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68968Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Paulo reported that if he set the amount of reserved memory to 0, then
we emitted a warning about a conflict before disabling our use of stolen
memory. This was introduced with

commit eaba1b8f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Jul 4 12:28:35 2013 +0100

    drm/i915: Verify that our stolen memory doesn't conflict

and is simply fixed by checking for a no reservation first.
Reported-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we've started to clean up pending flips when the gpu hangs in

commit 96a02917
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Mon Feb 18 19:08:49 2013 +0200

    drm/i915: Finish page flips and update primary planes after a GPU reset

the gpu reset work now also grabs modeset locks. But since work items
on our private work queue are not allowed to do that due to the
flush_workqueue from the pageflip code this results in a neat
deadlock:

INFO: task kms_flip:14676 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kms_flip        D ffff88019283a5c0     0 14676  13344 0x00000004
 ffff88018e62dbf8 0000000000000046 ffff88013bdb12e0 ffff88018e62dfd8
 ffff88018e62dfd8 00000000001d3b00 ffff88019283a5c0 ffff88018ec21000
 ffff88018f693f00 ffff88018eece000 ffff88018e62dd60 ffff88018eece898
Call Trace:
 [<ffffffff8138ee7b>] schedule+0x60/0x62
 [<ffffffffa046c0dd>] intel_crtc_wait_for_pending_flips+0xb2/0x114 [i915]
 [<ffffffff81050ff4>] ? finish_wait+0x60/0x60
 [<ffffffffa0478041>] intel_crtc_set_config+0x7f3/0x81e [i915]
 [<ffffffffa031780a>] drm_mode_set_config_internal+0x4f/0xc6 [drm]
 [<ffffffffa0319cf3>] drm_mode_setcrtc+0x44d/0x4f9 [drm]
 [<ffffffff810e44da>] ? might_fault+0x38/0x86
 [<ffffffffa030d51f>] drm_ioctl+0x2f9/0x447 [drm]
 [<ffffffff8107a722>] ? trace_hardirqs_off+0xd/0xf
 [<ffffffffa03198a6>] ? drm_mode_setplane+0x343/0x343 [drm]
 [<ffffffff8112222f>] ? mntput_no_expire+0x3e/0x13d
 [<ffffffff81117f33>] vfs_ioctl+0x18/0x34
 [<ffffffff81118776>] do_vfs_ioctl+0x396/0x454
 [<ffffffff81396b37>] ? sysret_check+0x1b/0x56
 [<ffffffff81118886>] SyS_ioctl+0x52/0x7d
 [<ffffffff81396b12>] system_call_fastpath+0x16/0x1b
2 locks held by kms_flip/14676:
 #0:  (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffffa0316545>] drm_modeset_lock_all+0x22/0x59 [drm]
 #1:  (&crtc->mutex){+.+.+.}, at: [<ffffffffa031656b>] drm_modeset_lock_all+0x48/0x59 [drm]
INFO: task kworker/u8:4:175 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u8:4    D ffff88018de9a5c0     0   175      2 0x00000000
Workqueue: i915 i915_error_work_func [i915]
 ffff88018e37dc30 0000000000000046 ffff8801938ab8a0 ffff88018e37dfd8
 ffff88018e37dfd8 00000000001d3b00 ffff88018de9a5c0 ffff88018ec21018
 0000000000000246 ffff88018e37dca0 000000005a865a86 ffff88018de9a5c0
Call Trace:
 [<ffffffff8138ee7b>] schedule+0x60/0x62
 [<ffffffff8138f23d>] schedule_preempt_disabled+0x9/0xb
 [<ffffffff8138d0cd>] mutex_lock_nested+0x205/0x3b1
 [<ffffffffa0477094>] ? intel_display_handle_reset+0x7e/0xbd [i915]
 [<ffffffffa0477094>] ? intel_display_handle_reset+0x7e/0xbd [i915]
 [<ffffffffa0477094>] intel_display_handle_reset+0x7e/0xbd [i915]
 [<ffffffffa044e0a2>] i915_error_work_func+0x128/0x147 [i915]
 [<ffffffff8104a89a>] process_one_work+0x1d4/0x35a
 [<ffffffff8104a821>] ? process_one_work+0x15b/0x35a
 [<ffffffff8104b4a5>] worker_thread+0x144/0x1f0
 [<ffffffff8104b361>] ? rescuer_thread+0x275/0x275
 [<ffffffff8105076d>] kthread+0xac/0xb4
 [<ffffffff81059d30>] ? finish_task_switch+0x3b/0xc0
 [<ffffffff810506c1>] ? __kthread_parkme+0x60/0x60
 [<ffffffff81396a6c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810506c1>] ? __kthread_parkme+0x60/0x60
3 locks held by kworker/u8:4/175:
 #0:  (i915){.+.+.+}, at: [<ffffffff8104a821>] process_one_work+0x15b/0x35a
 #1:  ((&dev_priv->gpu_error.work)){+.+.+.}, at: [<ffffffff8104a821>] process_one_work+0x15b/0x35a
 #2:  (&crtc->mutex){+.+.+.}, at: [<ffffffffa0477094>] intel_display_handle_reset+0x7e/0xbd [i915]

This blew up while running kms_flip/flip-vs-panning-vs-hang-interruptible
on one of my older machines.

Unfortunately (despite the proper lockdep annotations for
flush_workqueue) lockdep still doesn't detect this correctly, so we
need to rely on chance to discover these bugs.

Apply the usual bugfix and schedule the reset work on the system
workqueue to keep our own driver workqueue free of any modeset lock
grabbing.

Note that this is not a terribly serious regression since before the
offending commit we'd simply have stalled userspace forever due to
failing to abort all outstanding pageflips.

v2: Add a comment as requested by Chris.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Whilst running the shrinker, we need to hold a reference as we unbind
the objects, or else we may end up waiting for and retiring requests,
which in turn may result in this object being freed.

This is very similar to the eviction code which also has to be very
careful to keep a reference to its objects as it retires and unbinds
them.

Another similarity, that Ben pointed out, is that as we may call
retire-requests, the unbound_list is outside of our control. We must
only process a single element of that list at a time, that is we can not
rely on the "safe" next pointer being valid after a call to
i915_vma_unbind().

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffffa0082892>] i915_gem_gtt_finish_object+0x68/0xbd [i915]
  PGD 758d3067 PUD ac0d6067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in: dm_mod snd_hda_codec_realtek iTCO_wdt iTCO_vendor_support pcspkr snd_hda_intel i2c_i801 snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd lpc_ich mfd_core soundcore battery ac option usb_wwan usbserial uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev i915 video button drm_kms_helper drm acpi_cpufreq mperf freq_table
  CPU: 1 PID: 16835 Comm: fbo-maxsize Not tainted 3.11.0-rc7_nightlytop_8fdad4_20130902_+ #7977
  task: ffff8800712106d0 ti: ffff880028e4a000 task.ti: ffff880028e4a000
  RIP: 0010:[<ffffffffa0082892>]  [<ffffffffa0082892>] i915_gem_gtt_finish_object+0x68/0xbd [i915]
  RSP: 0018:ffff880028e4b9e8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff880145734000 RCX: ffff880145735328
  RDX: ffff8801457353fc RSI: 0000000000000000 RDI: ffff88007597cc00
  RBP: ffff88007597cc00 R08: 0000000000000001 R09: ffff88014f257f00
  R10: ffffea0001d65f00 R11: 0000000000bba60b R12: ffff880149e5b000
  R13: ffff880145734001 R14: ffff88007597ccc8 R15: ffff88007597cc00
  FS:  00007ff5bc919740(0000) GS:ffff88014f240000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000008 CR3: 0000000028f4c000 CR4: 00000000001407e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Stack:
   0000000000000000 ffff88007597cc00 ffff8801440d6840 0000000000000000
   ffff880145734000 ffffffffa007c854 0000000000000010 ffff88007597c900
   0000000000018000 00000000004a1201 ffff88007597cc60 ffffffffa007d183
  Call Trace:
   [<ffffffffa007c854>] ? i915_vma_unbind+0xe2/0x1d1 [i915]
   [<ffffffffa007d183>] ? __i915_gem_shrink+0xf1/0x162 [i915]
   [<ffffffffa007d2ee>] ? i915_gem_object_get_pages_gtt+0xfa/0x303 [i915]
   [<ffffffffa00795f4>] ? i915_gem_object_get_pages+0x54/0x89 [i915]
   [<ffffffffa007cbda>] ? i915_gem_object_pin+0x238/0x5ce [i915]
   [<ffffffff812cba5f>] ? __sg_page_iter_next+0x2b/0x58
   [<ffffffffa0082056>] ? gen6_ppgtt_insert_entries+0xf2/0x114 [i915]
   [<ffffffffa007fe4b>] ? i915_gem_execbuffer_reserve_vma.isra.13+0x79/0x18d [i915]
   [<ffffffffa008017c>] ? i915_gem_execbuffer_reserve+0x21d/0x347 [i915]
   [<ffffffffa0080bfb>] ? i915_gem_do_execbuffer.isra.17+0x4f3/0xe61 [i915]
   [<ffffffffa00795f4>] ? i915_gem_object_get_pages+0x54/0x89 [i915]
   [<ffffffffa007e405>] ? i915_gem_pwrite_ioctl+0x743/0x7a5 [i915]
   [<ffffffffa0081a46>] ? i915_gem_execbuffer2+0x15e/0x1e4 [i915]
   [<ffffffffa000e20d>] ? drm_ioctl+0x2a5/0x3c4 [drm]
   [<ffffffffa00818e8>] ? i915_gem_execbuffer+0x37f/0x37f [i915]
   [<ffffffff816f64c0>] ? __do_page_fault+0x3ab/0x449
   [<ffffffff810be3da>] ? do_mmap_pgoff+0x2b2/0x341
   [<ffffffff810e49be>] ? vfs_ioctl+0x1e/0x31
   [<ffffffff810e5194>] ? do_vfs_ioctl+0x3ad/0x3ef
   [<ffffffff810e5224>] ? SyS_ioctl+0x4e/0x7e
   [<ffffffff816f88d2>] ? system_call_fastpath+0x16/0x1b
  Code: 52 0c a0 48 c7 c6 22 30 0d a0 31 c0 e8 ef 00 f9 ff bf c6 a7 00 00 e8 90 5d 24 e1 f6 85 13 01 00 00 10 75 44 48 8b 85 18 01 00 00 <8b> 50 08 48 8b 30 49 8b 84 24 88 02 00 00 48 89 c7 48 81 c7 98
  RIP  [<ffffffffa0082892>] i915_gem_gtt_finish_object+0x68/0xbd [i915]
  RSP <ffff880028e4b9e8>
  CR2: 0000000000000008

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68171Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
[danvet: Bikeshed the comments a bit as discussed with Chris.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

exynos_drm_connector.c now uses videomode helper API. Hence select
VIDEOMODE_HELPERS at DRM_EXYNOS level itself instead of at
DRM_EXYNOS_FIMD to avoid the following compilation error when FIMD
is not selected (introduced by commit cf796235a6 "drm/exynos: fimd:
replace struct fb_videomode with videomode"):
drivers/built-in.o: In function `exynos_drm_connector_get_modes':
drivers/gpu/drm/exynos/exynos_drm_connector.c:86:
undefined reference to `drm_display_mode_from_videomode'
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since commit 383ffda2 ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since commit 383ffda2 ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since commit 383ffda2 ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since commit 383ffda2 ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since commit 383ffda2 ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Exynos is a DT-only platform. Add this info to Kconfig.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

To address the case where physically contiguous memory
MAY NOT be a mandatory requirement for framebuffer for
the application calling exynos_drm_gem_dumb_create,
the patch adds a feature to get non physically contiguous
memory for framebuffer, if physically contiguous memory
allocation fails and if IOMMU is supported.
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NArun Kumar <arun.kk@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch moves platfrom_data and device tree parsing
to separate function.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch adds code to get signal polarization setting
from device tree display-timings node.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch replaces all occurrences of struct fb_videomode by
more accurate struct videomode. The change allows to remove
mode conversion function and simplifies clock divider calculation.
Clock configuration is moved to separate function.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch checks if a requested window supports alpha channel or not.

In case of s3c64xx, window 0 doesn't support alpha channel so if
the request pixel format is ARGB8888 then change it to XRGB8888.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch fixes wrong pixel format setting.

A pixel format is decided according to bpp and depth, or user-requested
format but fimd driver considered only bpp value to decide a proper pixel
format. So this patch makes a proper pixel format to be set according
to drm_framebuffer's pixel_format which is set by addfb with bpp and
depth, or addfb2 with user-requested format.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

devm_kzalloc can fail. Hence check the pointer to avoid NULL pointer
dereferencing.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

kzalloc already has built-in error messages. Hence remove
additional ones.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Add of.h explicitly for of_* APIs.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

kfree handles null pointers. Hence this check is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The exynos4 platform is only dt-based since 3.10, we should convert driver data
and ids to dt-based parsing methods. The rotator driver has a limit table to get
size limit of input picture. Each SoCs has slightly different limit value
compared with any others.
For example, exynos4210's max_size of RGB888 is 16k x 16k. But, others have
8k x 8k. Another example the exynos5250 should have multiple of 2 pixel size
for its X/Y axis. Thus, we should keep different tables for each of them.
This patch also includes desciptions of each nodes for the rotator and specifies
a example how to bind it.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Ensure that all externally accessed functions are correctly prototyped
when defined in each file by making sure the headers with the protoypes
are included in the file with the definition.
Signed-off-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch makes g2d power domain and clock to be controlled
through pm runtime interfaces instead of controlling them
respectively.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
connected with resolution 2560x1600, following error occured even with
IOMMU enabled:
[0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer.
[0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0

To address the cases where physically contiguous memory MAY NOT be a
mandatory requirement for fb, the patch adds a feature to get non physically
contiguous memory for fb if physically contiguous memory allocation fails
and if IOMMU is supported.
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NArun Kumar <arun.kk@samsung.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Suppress warning of unused-variables by adding a BUG()+return for invalid
audio-formats.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NAlex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

The dpll actually runs at the port clock so we don't need
to multiply it again with the pixel multiplier to get the
adjusted_mode.clock. This is in contrast to the ironlake
pixel clock readout code which uses the fdi dotclock: That
one does _not_ run with multiplied pixels.

This issue goes back to the original clock readout code added
in

commit f1f644dc
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Jun 27 00:39:25 2013 +0300

    drm/i915: get mode clock when reading the pipe config v9

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The sdvo input timing needs to be the actual mode, the sdvo
encoder automatically adjusts for the need of pixel doubling or
quadrupling. This was lost in pipe config conversion of the
pixel multiplier in

commit 6cc5f341
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Mar 27 00:44:53 2013 +0100

    drm/i915: add pipe_config->pixel_multiplier

While at it ditch the intel_ prefix from the crtc in
intel_sdvo_mode_set.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Historically we've run our own driver hotplug handling in our own
work-queue, which then launched the drm core hotplug handling in the
system workqueue. This is important since we flush our own driver
workqueue in the pageflip code while hodling modeset locks, and only
the drm hotplug code grabbed these locks. But with

commit 69787f7d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Oct 23 18:23:34 2012 +0000

    drm: run the hpd irq event code directly

this was changed and now we could deadlock in our flip handler if
there's a hotplug work blocking the progress of the crucial unpin
works. So this broke the careful deadlock avoidance implemented in

commit b4a98e57
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Nov 1 09:26:26 2012 +0000

    drm/i915: Flush outstanding unpin tasks before pageflipping

Since the rule thus far has been that work items on our own workqueue
may never grab modeset locks simply restore that rule again.

v2: Add a comment to the declaration of dev_priv->wq to warn readers
about the tricky implications of using it. Suggested by Chris Wilson.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Stuart Abercrombie <sabercrombie@chromium.org>
Reported-by: NStuart Abercrombie <sabercrombie@chromium.org>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/26239
Cc: stable@vger.kernel.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Squash in a comment at the place where we schedule the work.
Requested after-the-fact by Chris on irc since the hpd work isn't the
only place we botch this.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I was getting a order 4 allocation failure from kmalloc when testing some
game after a few days uptime with some suspend/resumes.

For big allocations vmalloc should be used instead.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some vbioses have extra useless entries after "the end" of the table. This is
problematic since all of the vbios I found with this issue redefine the
pwm freq divider to insane levels (52750 Hz instead of 2500), thus breaking
fan management.

The first solution to solve this mess would be to change the length of the
table. The solution I choose was simply to avoid setting the pwm freq twice
as the other redefinitions are harmless with our current parser.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Reported-by: NMariusz Bialonczyk <manio@skyboo.net>
Tested-by: NMariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

MSIs were only problematic on some old, broken chipsets. But now that we
already see systems where PCI legacy interrupts are somewhat flaky, it's
really time to move to MSIs.

v2 (Ben Skeggs): blacklist BR02 boards
Signed-off-by: NLucas Stach <dev@lynxeye.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes a VGA monitor with a dodgy red (in this case) pin not being
detected.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Commit ea9197cc effectively enabled the
use of an improved DAC detection code, but introduced a regression on
the original nv50 chipset, causing a ghost monitor to be detected.

v2 (Ben Skeggs): the offending line was likely a thinko, removed it for
all chipsets (tested nv50 and nve6 to cover entire range) and added
some additional debugging.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67382Tested-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

i2c_bit_add_bus can call the pre_xfer function, which expects the func
pointer to be set. Pass in func to the port creation logic so that it is
set before i2c_bit_add_bus.

See https://bugs.freedesktop.org/show_bug.cgi?id=68456Reported-by: NHans-Peter Deifel <hpdeifel@gmx.de>
Tested-by: NHans-Peter Deifel <hpdeifel@gmx.de>
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Therm uses 3 ptimer alarms. Two to drive the fan and one for polling the
temperature. When suspending/resuming, alarms will never be fired.
As we are checking if there isn't an alarm pending before rescheduling
another one, we end up never checking temperature or updating the
fan speed.

This commit also adds debug messages to be able to spot more easily
if this case happens again in the future. Sorry for the spam if you
activate the debug level though.
Tested-by: NDash Four <mr.dash.four@googlemail.com>

v2:
- fix temperature polling too
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Since alarms don't play well with suspend, it is important every alarm
user cancels his tasks before suspending.

The task should be rescheduled on resume.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NDash Four <mr.dash.four@googlemail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>