- 10 1月, 2006 5 次提交
-
-
由 Dr. Werner Fink 提交于
- Driver support for live-ac3, firmware >= 2621 required. Signed-off-by: NDr. Werner Fink <werner@suse.de> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Marco Schluessler 提交于
- Fixed mpeg audio on spdif from Nexus-CA card (rev 2.3), definitions for sound chip MSP3415 Signed-off-by: NMarco Schluessler <marco@lordzodiac.de> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Oliver Endriss 提交于
- LNB power can now be switched off for Activy Budget-S rev GR/AL. Dishnetwork support fixed for Nova-S with bsbe1/lnbp21 frontend and Activy Budget-S rev AL. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Oliver Endriss 提交于
- Fixed dishnetwork support for Nexus-S rev 2.3 Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Andrew de Quincey 提交于
- Fixes for the topuptv/SCM mediaguard CAM module in KNC1 CI module Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
- 07 1月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
Now when kbuild passes KBUILD_MODNAME with "" do not __stringify it when used. Remove __stringnify for all users. This also fixes the output of: $ ls -l /sys/module/ drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia_core drwxr-xr-x 3 root root 0 2006-01-05 14:24 "processor" drwxr-xr-x 3 root root 0 2006-01-05 14:24 "psmouse" The quoting of the module names will be gone again. Thanks to GregKH + Kay Sievers for reproting this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 19 12月, 2005 1 次提交
-
-
由 Oliver Endriss 提交于
- Enable SPDIF output for DVB-S rev 2.3. Firmware 2623 or higher required. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
- 13 12月, 2005 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Clean up whitespaces at v4l/dvb files Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 12月, 2005 3 次提交
-
-
由 Carlos Silva 提交于
BUDGET_CI card depends on STV0297 demodulator. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
- Small cleanups: - make needlessly global functions static - every file should #include the headers containing the prototypes for it's global functions Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oliver Endriss 提交于
Fixed DiSEqC timing for saa7146-based budget cards (speed-up ioctls using SAA7146_I2C_SHORT_DELAY) Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 3 次提交
-
-
由 Oliver Endriss 提交于
stv0299_set_frontend(): reduced number of i2c transfers, set register 0x12 from inittab Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincy 提交于
Remove broken stv0299 enhanced tuning code Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Zwickel 提交于
This patch adds support for the Technotrend Budget Card S1500 with a BSBE1 frontend and the LNBP21. Signed-off-by: NMartin Zwickel <martin.zwickel@technotrend.de> Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 10月, 2005 1 次提交
-
-
由 Dmitry Torokhov 提交于
Input: convert drivers/media to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 9月, 2005 10 次提交
-
-
由 Karl Herz 提交于
Add PCI-ids of Siemens-DVB-C card with Technotrend manufacturer id. Signed-off-by: NKarl Herz <karl.herz@gmx.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oliver Endriss 提交于
Improved remote control support for av7110-based cards: o extended rc5 protocol, firmware >= 0x2620 required o key-up timer slightly adjusted o completely moved remote control code to av7110_ir.c o support for multiple ir receivers o for now, all av7110 cards share the same ir configuration and event device Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oliver Endriss 提交于
Disable COM_IF_LOCK workaround for firmware > 0x261f. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Disable superflous firmware handshake. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Enable frontend on KNC plus cards. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Fixes for CI interface. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Add support for TT DVB-C CI card. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 thomas schorpp 提交于
Add support for analog video inputs (CVBS and Y/C) of the analog module for the Siemens DVB-C card. Signed-off-by: Nthomas schorpp <t.schorpp@gmx.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Misc. fixes. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Oberritter 提交于
Pass a pointer to the i2c bus to the pll callbacks (stv0299 only). It was not possible to tell which i2c bus should be used if an adapter has multiple frontends on multiple i2c buses. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 9月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
This fixes the following compile error: ... LD .tmp_vmlinux1 drivers/built-in.o: In function `frontend_init': budget-av.c:(.text+0xb9448): undefined reference to `tda10046_attach' budget-av.c:(.text+0xb9518): undefined reference to `tda10021_attach' drivers/built-in.o: In function `philips_tu1216_request_firmware': budget-av.c:(.text+0xb937b): undefined reference to `request_firmware' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NJohannes Stezenbach <js@linuxtv.org> Acked-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 7月, 2005 1 次提交
-
-
由 Julian Scheel 提交于
The / in the driver name (budget dvb /w video in) is not a valid character for device names - removed it, now it works! Same for ttusb-budget. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJulian Scheel <julian@jusst.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 7月, 2005 13 次提交
-
-
由 Oliver Endriss 提交于
Timeout handling fixed, especially for preemtible kernels and/or high system load. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christophe Lucas 提交于
printk() calls should include appropriate KERN_* constant. Signed-off-by: NChristophe Lucas <clucas@rotomalug.org> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oliver Endriss 提交于
av7110_fe_lock_fix() modified in a way that it can be retried after -ERESTARTSYS Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Fix indentation and add some whitepsace between operators. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Change error handling in av7110_stop_feed() to stop as many filters as possible in case of errors. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Wolfgang Rohdewald 提交于
o propagate more errors back to caller or log them, mainly in av7110.c and av7110_av.c o fix error message in StartHWFilter o do not StopHWFilter for handle 0xffff Signed-off-by: NWolfgang Rohdewald <wolfgang@rohdewald.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Fix for QAM128 in VHF band suggested by Timo Helki. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dr. Werner Fink 提交于
Fixed typo in AUDUIO_CONTINUE ioctl: AUDIO_CMD_MUTE -> AUDIO_CMD_UNMUTE Signed-off-by: N"Dr. Werner Fink" <werner@suse.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Fix bug in timeout handling. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Wolfgang Rohdewald 提交于
o make sure ERESTARTSYS will be propagated o ReleaseBitmap: starting with Firmware 261e, also release when BMP_LOADING o removes unused #define BMP_LOADINGS o in many cases changed the return value from -1 to something more meaningful like ETIMEDOUT, EINVAL o changed syslog message timeout waiting for COMMAND such that it indicates what command did not complete o reduce # of arguments for LoadBitmap and BlitBitmap o av7110_osd_cmd: remove the out: label Signed-off-by: NWolfgang Rohdewald <wolfgang@rohdewald.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Support for new TT DVB-T-CI, thanks to Andre Weidemann Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Add support for s5h1420 frontend (new Technotrend/Hauppauge DVB-S SE). Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hartmut Hackmann 提交于
o added config options for IF frequency and AGC o support DSP boot from on board eeprom o added pll sleep call Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-