- 23 1月, 2018 16 次提交
-
-
由 Vasily Gorbik 提交于
__ksymtab sections created for exported symbols are not needed during the decompressor phase and could be discarded to save the memory. The source of those exports is ebcdic.o, which is linked into both vmlinux and boot/compressed/vmlinux. .eh_frame section is also unused and could be discarded from boot/compressed/vmlinux. The same has been done for vmlinux in: "s390/kernel: emit CFI data in .debug_frame and discard .eh_frame sections". Signed-off-by: NVasily Gorbik <gor@linux.vnet.ibm.com> Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Eugene Syromiatnikov 提交于
For some reason, the implementation of some 16-bit ID system calls (namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast instead of low2highgid/low2highuid macros for converting [GU]IDs, which led to incorrect handling of value of -1 (which ought to be considered invalid). Discovered by strace test suite. Cc: stable@vger.kernel.org Signed-off-by: NEugene Syromiatnikov <esyr@redhat.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Previously, the generated dis.h and facilities.h header files have been stored in include/generated. Because they are s390 specific, store them in the arch/s390/include/generated/asm/ directory. Also update references to the header files respectively. To prevent name collisions with those header files in asm/ that include the generated ones, rename the generated headers files and add an -defs suffix. Also update the generators to create the ifdef guards respectively. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Update the uapi/asm/unistd.h to include the generated compat and 64-bit version of the unistd.h and, as well as, the unistd_nr.h header file. Also remove the arch/s390/kernel/syscalls.S file and use the generated system call table, syscall_table.h, instead. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Generate the system call specific files from the archheaders and archprepare make targets. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Introduce the syscalltbl script to read the system call table and generate respective uapi unistd.h header files. Also it generates the contents syscalls.S - the real system call table - which is included by arch/s390/kernel/entry.S. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Add a table that lists available system calls and their entry functions. With this change, adding new system calls become fairly easy: 1. Add a new table entry consisting of the system call number, abi (common or 64/31 bit only), and the entry functions. 2. If necessary, create a compat syscall wrapper. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Vasily Gorbik 提交于
.rodata.compressed section contains compressed linux image and is quite large. By swapping text and rodata.compressed sections, the decompressor code ends up between 0x11000 and 0x100000 addresses, which makes it easier: - to distinguish the decompressor phase from decompressed code (which lives above 0x100000, except for small startup_continue), - define break points which don't intersect with the main kernel image later. Signed-off-by: NVasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Vasily Gorbik 提交于
"__section(data)" has to be "__section(.data)". __section(data) produces extra "data" section in addition to ".data" section. Signed-off-by: NVasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Vasily Gorbik 提交于
bss section is cleared before ipl.c code is called or global variables are used nowadays. Remove stale comment and __section(.data) from few global variables. Also removes static/global variables initialization to 0. Signed-off-by: NVasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Vasily Gorbik 提交于
A couple of the low core offsets are repeatedly used throughout head.S and are hard coded. Replace them with corresponding constants from asm-offsets.h to improve readability. Signed-off-by: NVasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Fixes: 8bc1e4ec ("s390/disassembler: generate opcode tables from text file") Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
-
由 Heiko Carstens 提交于
The 64 bit system call table contains three entries that come without a matching NR_<name> entry in unistd.h. In fact all three of them do not make sense on 64 bit, but only for compat processes. llseek and mmap2 were specifically introduced for 32 bit / compat processes. getrlimit is wired up twice, so that only the entry that comes with a corresponding NR_getrlimit needs to be kept. The other entries can be removed, since it seems very unlikely that this will break user space. Reported-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Pravin Shedge 提交于
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: NPravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Höppner 提交于
In dasd_term_IO() ccw_device_clear() is called and the return code is checked afterwards. Though, the return codes -EIO and -EBUSY will never be returned and can therefore be removed from the check. In dasd_start_IO() the return code of either ccw_device_tm_start() or ccw_device_start() is checked. However, neither of them returns -ETIMEDOUT. Remove that check as well. Signed-off-by: NJan Höppner <hoeppner@linux.vnet.ibm.com> Acked-by: NStefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christophe JAILLET 提交于
Use 'seq_printf(m, "...%*phN...")' instead of duplicating its implementation. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: NStefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 13 12月, 2017 4 次提交
-
-
由 Hendrik Brueckner 提交于
Revise and add CFI CFA and register rule annotations to the vDSO functions for proper stack unwinding and debugging. Because glibc might call the vDSO in special ways, the vDSO code does not rely on a stack frame created by the caller. The TOD clock value can be therefore not stored in the pre-allocated stack area and additional stack space is required. To correctly annotate these situations with CFI, the .cfi_val_offset directive is required to create relative offsets on the value of the stack register %r15. Because the .cfi_val_offset directive is available with recent GNU assembler versions only, additional checks are necessary. Note that if the vDSO is assembled with an older assembler version, stack unwinding and debugging from within the vDSO code might not be possible. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Using perf probe and libdw on kernel modules failed to find CFI data for symbols. The CFI data is stored in the .eh_frame section. The elfutils libdw is not able to extract the CFI data correctly, because the .eh_frame section requires "non-simple" relocations for kernel modules. The suggestion is to avoid these "non-simple" relocations by emitting the CFI data in the .debug_frame section. Let gcc emit respective directives by specifying the -fno-asynchronous-unwind-tables option. Using the .debug_frame section for CFI data, the .eh_frame section becomes unused and, thus, discard it for kernel and modules builds The vDSO requires the .eh_frame section and, hence, emit the CFI data in both, the .eh_frame and .debug_frame sections. See also discussion on elfutils/libdw bugzilla: https://sourceware.org/bugzilla/show_bug.cgi?id=22452Suggested-by: NMark Wielaard <mark@klomp.org> Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
In a virtualized setup lazy flushing can lead to the hypervisor running out of resources when lots of guest pages need to be pinned. In this situation simply trigger a global flush to give the hypervisor a chance to free some of these resources. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
git://git.infradead.org/linux-platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver fixes from Darren Hart: - Correct an error in the evdev protocol in asus-wireless which results in dropped key events in recent versions of libinput - Add a quirk for keyboard lighting for a specific Dell laptop - Silence a static analysis warning regarding unchecked return values of small kmalloc() allocations in dell-wmi * tag 'platform-drivers-x86-v4.15-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: dell-wmi: check for kmalloc() errors platform/x86: asus-wireless: send an EV_SYN/SYN_REPORT between state changes platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410
-
- 12 12月, 2017 9 次提交
-
-
由 Dan Carpenter 提交于
This allocation won't fail in the current kernel because it's small but not checking for kmalloc() failures introduces static checker warnings so let's fix it. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NMario Limonciello <mario.limonciello@dell.com> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Peter Hutterer 提交于
Sending the switch state change twice within the same frame is invalid evdev protocol and only works if the client handles keys immediately as well. Processing events immediately is incorrect, it forces a fake order of events that does not exist on the device. Recent versions of libinput changed to only process the device state and SYN_REPORT time, so now the key event is lost. https://bugs.freedesktop.org/show_bug.cgi?id=104041Signed-off-by: NPeter Hutterer <peter.hutterer@who-t.net> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Pali Rohár 提交于
This machine reports number of keyboard backlight led levels, instead of value of the last led level index. Therefore max_brightness properly needs to be subtracted by 1 to match led max_brightness API. Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Reported-by: NGabriel M. Elder <gabriel@tekgnowsys.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu fix from Tejun Heo: "Just one patch to work around CRIS boot problem caused by a recent change which freed a temporary boot data structure. The root cause is on CRIS side but it doesn't seem trivial to fix. For now, work around by skipping freeing on CRIS" * 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: hack to let the CRIS architecture to boot until they clean up
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: - Prateek posted a couple patches to fix a deadlock involving cpuset and workqueue. It unfortunately caused a different deadlock and the recent workqueue hotplug simplification removed the original deadlock, so Prateek's two patches are reverted for now. - The new stat code was missing u64_stats initialization. Fixed. - Doc and other misc changes * 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: add warning about RT not being supported on cgroup2 Revert "cgroup/cpuset: remove circular dependency deadlock" Revert "cpuset: Make cpuset hotplug synchronous" cgroup: properly init u64_stats debug cgroup: use task_css_set instead of rcu_dereference cpuset: Make cpuset hotplug synchronous cgroup/cpuset: remove circular dependency deadlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue fixes from Tejun Heo: - Lai's hotplug simplifications inadvertently fix a possible deadlock involving cpuset and workqueue - CPU isolation fix which was reverted due to the changes in the housekeeping code resurrected - A trivial unused include removal * 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: remove unneeded kallsyms include workqueue/hotplug: remove the workaround in rebind_workers() workqueue/hotplug: simplify workqueue_offline_cpu() workqueue: respect isolated cpus when queueing an unbound work main: kernel_start: move housekeeping_init() before workqueue_init_early()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Nothing too interesting. David Milburn improved a corner case misbehavior during hotplug. Other than that, minor driver-specific fixes" * 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: sata_down_spd_limit should return if driver has not recorded sstatus speed ahci: mtk: Change driver name to ahci-mtk ahci: qoriq: refine port register configuration pata_pdc2027x : make pdc2027x_*_timing structures const pata_pdc2027x: Remove unnecessary error check ata: mediatek: Fix typo in module description
-
git://github.com/cminyard/linux-ipmi由 Linus Torvalds 提交于
Pull IPMI fixes from Corey Minyard. * tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi: ipmi_si: fix crash on parisc ipmi_si: Fix oops with PCI devices ipmi: Stop timers before cleaning up the module
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This push fixes the following issues: - buffer overread in RSA - potential use after free in algif_aead. - error path null pointer dereference in af_alg - forbid combinations such as hmac(hmac(sha3)) which may crash - crash in salsa20 due to incorrect API usage" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: salsa20 - fix blkcipher_walk API usage crypto: hmac - require that the underlying hash algorithm is unkeyed crypto: af_alg - fix NULL pointer dereference in crypto: algif_aead - fix reference counting of null skcipher crypto: rsa - fix buffer overread when stripping leading zeroes
-
- 11 12月, 2017 9 次提交
-
-
由 Sergey Senozhatsky 提交于
The filw was converted from print_symbol() to %pf some time ago (044c782c "workqueue: fix checkpatch issues"). kallsyms does not seem to be needed anymore. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Mikulas Patocka 提交于
This patch fixes ipmi crash on parisc introduced in the kernel 4.15-rc. The pointer io.io_setup is not initialized and thus it causes crash in try_smi_init when attempting to call new_smi->io.io_setup. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com>
-
由 Corey Minyard 提交于
When the IPMI PCI code was split out, some code was consolidated for setting the io_setup field in the io structure. The PCI code needed this set before registration to probe register spacing, though, so restore the old code for that function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197999Signed-off-by: NCorey Minyard <cminyard@mvista.com> Tested-by: NMeelis Roos <mroos@linux.ee>
-
由 Linus Torvalds 提交于
-
由 Jeff Layton 提交于
HPFS does not set SB_I_VERSION and does not use the i_version counter internally. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NMikulas Patocka <mikulas@twibright.com> Reviewed-by: NMikulas Patocka <mikulas@twibright.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
sign_extend32 counts the sign bit parameter from 0, not from 1. So we have to use "11" for 12th bit, not "12". This mistake means we have not allowed negative op and cmp args since commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") till now. Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from David Sterba: "This contains a few fixes (error handling, quota leak, FUA vs nobarrier mount option). There's one one worth mentioning separately - an off-by-one fix that leads to overwriting first byte of an adjacent page with 0, out of bounds of the memory allocated by an ioctl. This is under a privileged part of the ioctl, can be triggerd in some subvolume layouts" * tag 'for-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Fix possible off-by-one in btrfs_search_path_in_tree Btrfs: disable FUA if mounted with nobarrier btrfs: fix missing error return in btrfs_drop_snapshot btrfs: handle errors while updating refcounts in update_ref_for_cow btrfs: Fix quota reservation leak on preallocated files
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: - A revert of all SCPI changes from the 4.15 merge window. They had regressions on the Amlogic platforms, and the submaintainer isn't around to fix these bugs due to vacation, etc. So we agreed to revert and revisit in next release cycle. - A series fixing a number of bugs for ARM CCN interconnect, around module unload, smp_processor_id() in preemptable context, and fixing some memory allocation failure checks. - A handful of devicetree fixes for different platforms, fixing warnings and errors that were previously ignored by the compiler. - The usual set of mostly minor fixes for different platforms. * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM64: dts: meson-gx: fix UART pclk clock name ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv ARM: dts: Fix dm814x missing phy-cells property ARM: dts: Fix elm interrupt compiler warning bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left. bus: arm-cci: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Simplify code bus: arm-ccn: Check memory allocation failure bus: arm-ccn: constify attribute_group structures. firmware: arm_scpi: Revert updates made during v4.15 merge window arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv arm64: dts: sort vendor subdirectories in Makefile alphabetically meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry arm64: dts: uniphier: remove unnecessary interrupt-parent ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "ARM: - A number of issues in the vgic discovered using SMATCH - A bit one-off calculation in out stage base address mask (32-bit and 64-bit) - Fixes to single-step debugging instructions that trap for other reasons such as MMMIO aborts - Printing unavailable hyp mode as error - Potential spinlock deadlock in the vgic - Avoid calling vgic vcpu free more than once - Broken bit calculation for big endian systems s390: - SPDX tags - Fence storage key accesses from problem state - Make sure that irq_state.flags is not used in the future x86: - Intercept port 0x80 accesses to prevent host instability (CVE) - Use userspace FPU context for guest FPU (mainly an optimization that fixes a double use of kernel FPU) - Do not leak one page per module load - Flush APIC page address cache from MMU invalidation notifiers" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: x86: fix APIC page invalidation KVM: s390: Fix skey emulation permission check KVM: s390: mark irq_state.flags as non-usable KVM: s390: Remove redundant license text KVM: s390: add SPDX identifiers to the remaining files KVM: VMX: fix page leak in hardware_setup() KVM: VMX: remove I/O port 0x80 bypass on Intel hosts x86,kvm: remove KVM emulator get_fpu / put_fpu x86,kvm: move qemu/guest FPU switching out to vcpu_run KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion KVM: arm/arm64: kvm_arch_destroy_vm cleanups KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner kvm: arm: don't treat unavailable HYP mode as an error KVM: arm/arm64: Avoid attempting to load timer vgic state without a vgic kvm: arm64: handle single-step of hyp emulated mmio instructions kvm: arm64: handle single-step during SError exceptions kvm: arm64: handle single-step of userspace mmio instructions kvm: arm64: handle single-stepping trapped instructions KVM: arm/arm64: debug: Introduce helper for single-step arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one ...
-
- 10 12月, 2017 2 次提交
-
-
由 Olof Johansson 提交于
* fixes: ARM64: dts: meson-gx: fix UART pclk clock name ARM: dts: Fix dm814x missing phy-cells property ARM: dts: Fix elm interrupt compiler warning bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left. bus: arm-cci: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Simplify code bus: arm-ccn: Check memory allocation failure bus: arm-ccn: constify attribute_group structures. meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node
-
由 Olof Johansson 提交于
Merge tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic fixes for v4.15-rc - GPIO interrupt fixes - socinfo fix for GX series - fix typo * tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gx: fix UART pclk clock name meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node Signed-off-by: NOlof Johansson <olof@lixom.net>
-