Installed debug handler will be used for guest debug support
and debug facility emulation features (patches for these
features will follow this patch).
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
[bharat.bhushan@freescale.com: Substantial changes]
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Now we use ESID_BITS of kernel address to build proto vsid. So rename
USER_ESIT_BITS to ESID_BITS
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

This patch change the kernel VSID range so that we limit VSID_BITS to 37.
This enables us to support 64TB with 65 bit VA (37+28). Without this patch
we have boot hangs on platforms that only support 65 bit VA.

With this patch we now have proto vsid generated as below:

We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
from mmu context id and effective segment id of the address.

For user processes max context id is limited to ((1ul << 19) - 5)
for kernel space, we use the top 4 context ids to map address as below
0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

VSID_BITS and VSID_BITS_1T depends on the context bits  and user esid
bits. Make the dependency explicit
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

This sets the DSCR (Data Stream Control Register) in the FSCR (Facility Status
& Control Register).

Also harmonise TAR (Target Address Register) FSCR bit definition too.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Since kmp takes 2 unsigned long args there should be a compat wrapper.
Since one isn't provided I think it's safer just to hook this up to not
implemented.  If we need it later we can do it properly then.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The BITOP_LE_SWIZZLE macro was used in the little-endian bitops functions
for powerpc.  But these functions were converted to generic bitops and
the BITOP_LE_SWIZZLE is not used anymore.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch makes the parameter old a const pointer to the old memory
slot and adds a new parameter named change to know the change being
requested: the former is for removing extra copying and the latter is
for cleaning up the code.
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds the new transactional memory archtected state to the signal context
in both 32 and 64 bit.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Here we add the helper functions to be used when context switching.  These
allow us to fully reclaim and recheckpoint a transaction.

We introduce a new paca field called tm_scratch to help us store away register
values when doing the low level tm reclaim register save.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add transactional memory paca scratch register to show_regs.  This is useful
for debugging.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Defines for MSR bits and transactional memory related SPRs TFIAR, TEXASR and
TEXASRU.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds new macros for saving and restoring checkpointed architected state
from and to the thread_struct.

It also adds some debugging macros for when your brain explodes trying to debug
your transactional memory enabled kernel.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Set of new archtected state for saving away on context switch.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Here we define the new instructions we need for transactional memory in the
kernel.  This is so we can support compiling with binutils that don't support
the new transactional memory instructions.

Transactional memory results in two sets of architected state (GPRs/VSRs
etc).

treclaim allows us to read the checkpointed state (from the tbegin) so that we
can store it away on a context switch.  It does this by overwriting the exiting
architected state, so you have to save that away before you treclaim.  treclaim
will also abort a transaction, so you can give a register value which contains
an abort reason.

trecheckpoint allows us to inject into the checkpointed state as if it were at
the tbegin.  It does this by copying the current architected state into the
checkpointed state.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The powerpc boot_paca symbol is now only used within the
early_setup() routine, so move it from its global definition
into early_setup().
Signed-off-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

To allow more control of the verbosity of ps3_result() add a check
for the preprocessor macro PS3_VERBOSE_RESULT that builds a verbose
verion of the ps3_result() routine.
Signed-off-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The CFAR (Come-From Address Register) is a useful debugging aid that
exists on POWER7 processors.  Currently HV KVM doesn't save or restore
the CFAR register for guest vcpus, making the CFAR of limited use in
guests.

This adds the necessary code to capture the CFAR value saved in the
early exception entry code (it has to be saved before any branch is
executed), save it in the vcpu.arch struct, and restore it on entry
to the guest.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler.  For these we currently just have a branch to an
out-of-line handler.  However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.

To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest.  We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler.  To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.

In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions.  Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.

Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7.  Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.

This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

__ARCH_WANT_SYS_RT_SIGACTION,
__ARCH_WANT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore
CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} -
can be assumed always set.

Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Current kvmppc_booke_handlers uses the same macro (KVM_HANDLER) and
all handlers are considered to be the same size. This will not be
the case if we want to use different macros for different handlers.

This patch improves the kvmppc_booke_handler so that it can
support different macros for different handlers.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
[bharat.bhushan@freescale.com: Substantial changes]
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Like other places, use thread_struct to get vcpu reference.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds support for enabling and context switching the Target
Address Register in Power8. The TAR is a new special purpose register
that can be used for computed branches with the bctar[l] (branch
conditional to TAR) instruction in the same manner as the count and link
registers.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix compile errors like those below:

  CC      arch/powerpc/perf/power7-pmu.o
   /home/git/linux/arch/powerpc/perf/power7-pmu.c:397:2: error: initialization from incompatible pointer type [-Werror]
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130205231938.GA24125@us.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix warnings:
symbol 'clockctl' was not declared. Should it be static?
symbol 'rate_clks' was not declared. Should it be static?
symbol 'dev_clks' was not declared. Should it be static?
symbol 'mpc5121_clk_init' was not declared. Should it be static?
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Add ability to configure chip select (CS) parameters for devices
that need different CS parameters setup after their configuration.
I.e. an FPGA device on LP bus can require different CS parameters
for its bus interface after loading firmware into it. A driver
can easily reconfigure the LPC CS parameters using this function.
Acked-by: NTimur Tabi <timur@tabi.org>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

SYSCALL_DEFINE and COMPAT_SYSCALL_DEFINE do all argument normalization
we need.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

	Switch from __ARCH_WANT_SYS_RT_SIGACTION to opposite
(!CONFIG_ODD_RT_SIGACTION); the only two architectures that
need it are alpha and sparc.  The reason for use of CONFIG_...
instead of __ARCH_... is that it's needed only kernel-side
and doing it that way avoids a mess with include order on many
architectures.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make some POWER7-specific perf events available in sysfs.

	$ /bin/ls -1 /sys/bus/event_source/devices/cpu/events/
	branch-instructions
	branch-misses
	cache-misses
	cache-references
	cpu-cycles
	instructions
	PM_BRU_FIN
	PM_BRU_MPRED
	PM_CMPLU_STALL
	PM_CYC
	PM_GCT_NOSLOT_CYC
	PM_INST_CMPL
	PM_LD_MISS_L1
	PM_LD_REF_L1
	stalled-cycles-backend
	stalled-cycles-frontend

where the 'PM_*' events are POWER specific and the others are the
generic events.

This will enable users to specify these events with their symbolic
names rather than with their raw code.

	perf stat -e 'cpu/PM_CYC' ...
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062528.GE13720@us.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make the generic perf events in POWER7 available via sysfs.

	$ ls /sys/bus/event_source/devices/cpu/events
	branch-instructions
	branch-misses
	cache-misses
	cache-references
	cpu-cycles
	instructions
	stalled-cycles-backend
	stalled-cycles-frontend

	$ cat /sys/bus/event_source/devices/cpu/events/cache-misses
	event=0x400f0

This patch is based on commits that implement this functionality on x86.
Eg:
	commit a4747393
	Author: Jiri Olsa <jolsa@redhat.com>
	Date:   Wed Oct 10 14:53:11 2012 +0200

	    perf/x86: Make hardware event translations available in sysfs

Changelog:[v2]
	[Jiri Osla] Drop EVENT_ID() macro since it is only used once.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062454.GD13720@us.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>