Avoids a crash on pre-DP asics that support HDMI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This reverts commit b9729b17.

This seems to break the cursor on resume for lots of systems.

Cc: stable@vger.kernel.org

We only should do so when the BO_VA was actually mapped.
Otherwise we get a nice error message on the next CS.

v2: It actually doesn't matter if it was invalidated or not,
    if it was mapped we need to clear the area where it was mapped.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com> (v1)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In order for hibernation to reliably work we need to properly turn
off the SDMA block, sadly after numerous attemps i haven't not found
proper sequence for clean and full shutdown. So simply reset both
SDMA block, this makes hibernation works reliably on sea island GPU
family (CI)

Hibernation and suspend to ram were tested (several times) on :
Bonaire
Hawaii
Mullins
Kaveri
Kabini

Cc: stable@vger.kernel.org
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In order for hibernation to reliably work we need to cleanup more
thoroughly the compute ring. Hibernation is different from suspend
resume as when we resume from hibernation the hardware is first
fully initialize by regular kernel then freeze callback happens
(which correspond to a suspend inside the radeon kernel driver)
and turn off each of the block. It turns out we were not cleanly
shutting down the compute ring. This patch fix that.

Hibernation and suspend to ram were tested (several times) on :
Bonaire
Hawaii
Mullins
Kaveri
Kabini

Changed since v1:
  - Factor the ring stop logic into a function taking ring as arg.

Cc: stable@vger.kernel.org
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use kzalloc for allocating one thing rather than
kcalloc(1...

The semantic patch that makes this change is as follows:

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
          ...)
// </smpl>
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Reviewed-by: NVaneet Narang <v.narang@samsung.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds three new interfaces to kfd2kgd interface file of radeon.

The interfaces are:

- Check if a specific VMID has a valid PASID mapping
- Retrieve the PASID which is mapped to a specific VMID
- Issue a VMID invalidation request to the ATC
Signed-off-by: NAlexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds new interface functions to the kfd2kgd interface file. The
new functions allow to perform H/W debugger operations by writing to GPU
registers.
Signed-off-by: NYair Shachar <yair.shachar@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch deinlines indirect register accessor functions.

These functions perform two mmio accesses, framed by spin lock/unlock.
Spin lock/unlock by itself takes more than 50 cycles in ideal case
(if lock is exclusively cached on current CPU).

With this .config: http://busybox.net/~vda/kernel_config,
after uninlining these functions have sizes and callsite counts
as follows:

r600_uvd_ctx_rreg: 111 bytes, 4 callsites
r600_uvd_ctx_wreg: 113 bytes, 5 callsites
eg_pif_phy0_rreg: 106 bytes, 13 callsites
eg_pif_phy0_wreg: 108 bytes, 13 callsites
eg_pif_phy1_rreg: 107 bytes, 13 callsites
eg_pif_phy1_wreg: 108 bytes, 13 callsites
rv370_pcie_rreg: 111 bytes, 21 callsites
rv370_pcie_wreg: 113 bytes, 24 callsites
r600_rcu_rreg: 111 bytes, 16 callsites
r600_rcu_wreg: 113 bytes, 25 callsites
cik_didt_rreg: 106 bytes, 10 callsites
cik_didt_wreg: 107 bytes, 10 callsites
tn_smc_rreg: 106 bytes, 126 callsites
tn_smc_wreg: 107 bytes, 116 callsites
eg_cg_rreg: 107 bytes, 20 callsites
eg_cg_wreg: 108 bytes, 52 callsites

Functions r100_mm_rreg() and r100_mm_rreg() have a fast path and
a locked (slow) path. This patch deinlines only slow path.

r100_mm_rreg_slow: 78 bytes, 2083 callsites
r100_mm_wreg_slow: 81 bytes, 3570 callsites

Reduction in code size is more than 65,000 bytes:

    text     data      bss       dec     hex filename
85740176 22294680 20627456 128662312 7ab3b28 vmlinux.before
85674192 22294776 20627456 128598664 7aa4288 vmlinux
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We have that bug for years and some users report side effects when fixing it on older hardware.

So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The value was much too low, which could cause the userspace visible
vblank counter to move backwards when the hardware counter wrapped
around.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is theoretically possible that a swapped out BO gets the
same GTT address, but different backing pages while being swapped in.

Instead just use another VA state to note updated areas.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- make it static
- fix mask/bool handling for last param
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Avoids a crash when a monitor is hotplugged and the encoder
and connector are not linked yet.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=90681Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This breaks too many things.

bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=99041
https://bugs.freedesktop.org/show_bug.cgi?id=90681

This reverts commit 0f55db36.

Cc: stable@vger.kernel.org

Enabling audio may enable different pll dividers.  Don't share
plls if the monitors differ in audio support.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=98751Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Since we are messing with state in the worker.

v2: drop the changes in the mst worker
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the generic mechanism to declare a bitmap instead of unsigned long.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some of the vce clocks are automatic, others need to
be manually enabled.  For ease, just disable cg when
vce is active.

v2: rebased, call vce_v1_0_enable_mgcg directly
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initial support for VCE 1.0 using newest firmware.

v2: rebased
v3: fix for TN
v4: fix FW size calculation
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements the function to set the vce clocks
on TN hardware.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For setting clocks with VCE v1.0

v2: (chk) rebased on current tree
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They seem to work fine with the kernel interface.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Previously we were completely over allocating, fix this
by actually implementing the size calculation.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Userspace will be able to tell whether a GPU reset occured by comparing
an old referece value of the counter with a new value.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

That atom table does not check these bits.  Fixes aux
regressions on some boards.
Reported-by: NMalte Schröder <malte@tnxip.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Retry the dpcd fetch several times.  Some eDP panels
fail several times before the fetch is successful.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73530Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.

The function currently enables the timestamp interrupt and the
bad opcode interrupt.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This causes an oops as we haven't initialised the mst
layer.
Reported-by: NDave Jones <&lt;davej@codemonkey.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The mapping range is inclusive between starting and ending addresses.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Saving the current UVD state on suspend and restoring it on resume
just doesn't work reliable. Just close cleanup all sessions on suspend.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

MPEG 2/4 are only supported since UVD3.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Invalid messages can crash the hw otherwise.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Invalid handles can crash the hw.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We shouldn't try to reserve and wait for a BO that isn't bound. Otherwise
we can run into a deadlock if we have a fault during binding the BO.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>