- 26 7月, 2013 5 次提交
-
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
r600 dpm fixes, old school card dac fixes, lockup fixes endian fixes * 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: fix r600_enable_sclk_control() drm/radeon/dpm: implement force performance levels for rv6xx drm/radeon/dpm: fix displaygap programming on rv6xx drm/radeon/dpm: fix a typo in the rv6xx mclk setup drm/radeon: fix combios tables on older cards drm/radeon: improve dac adjust heuristics for legacy pdac drm/radeon: Another card with wrong primary dac adj drm/radeon: fix endian issues with DP handling (v3) drm/radeon/vm: only align the pt base to 32k drm/radeon: wait for 3D idle before using CP DMA
-
由 Alex Deucher 提交于
Actually program the correct register to enable engine clock scaling control. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Allows you to limit the selected power levels via sysfs. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Need to use the driver state rather than the register state since the displays may not be enabled when the power state is programmed. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Need to set high for the last two entries. Looks like a copy and paste typo. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 25 7月, 2013 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Ben Herrenschmidt: "Here is a series of powerpc fixes. It's a bit big, mostly because of the series of 11 "EEH" patches from Gavin. The EEH (Our IBM specific PCI/PCIe Enhanced Error Handling) code had been rotting for a while and this merge window saw a significant rework & fixing of it by Gavin Shan. However, that wasn't complete and left some open issues. There were still a few corner cases that didn't work properly, for example in relation to hotplug and devices without explicit error handlers. We had some patches but they weren't quite good enough yet so I left them off the 3.11 merge window. Gavin since then fixed it all up, we ran quite a few rounds of testing and it seems fairly solid (at least probably more than it has ever been). This should probably have made -rc1 but both Gavin and I took some vacation so it had to wait for -rc2. The rest is more bug fixes, mostly to new features recently added, for example, we missed the cpu table entry for one of the two models of P8 (we didn't realize they had different PVR [Processor Version Register] values), some module CRC issues, etc..." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (23 commits) powerpc/perf: BHRB filter configuration should follow the task powerpc/perf: Ignore separate BHRB privilege state filter request powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instruction powerpc/mm: Fix fallthrough bug in hpte_decode powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert() powerpc/eeh: Introdce flag to protect sysfs powerpc/eeh: Fix unbalanced enable for IRQ powerpc/eeh: Don't use pci_dev during BAR restore powerpc/eeh: Use partial hotplug for EEH unaware drivers powerpc/pci: Partial tree hotplug support powerpc/eeh: Use safe list traversal when walking EEH devices powerpc/eeh: Keep PE during hotplug powerpc/pci/hotplug: Don't need to remove from EEH cache twice powerpc/pci: Override pcibios_release_device() powerpc/eeh: Export functions for hotplug powerpc/eeh: Remove reference to PCI device powerpc: Fix the corrupt r3 error during MCE handling. powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMU powerpc/pseries: Drop "select HOTPLUG" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This push fixes a memory corruption issue in caam, as well as reverting the new optimised crct10dif implementation as it breaks boot on initrd systems. Hopefully crct10dif will be reinstated once the supporting code is added so that it doesn't break boot" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" crypto: caam - Fixed the memory out of bound overwrite issue
-
- 24 7月, 2013 33 次提交
-
-
由 Herbert Xu 提交于
This reverts commits 67822649 39761214 0b95a7f8 31d93962 2d31e518 Unfortunately this change broke boot on some systems that used an initrd which does not include the newly created crct10dif modules. As these modules are required by sd_mod under certain configurations this is a serious problem. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Anshuman Khandual 提交于
When the task moves around the system, the corresponding cpuhw per cpu strcuture should be popullated with the BHRB filter request value so that PMU could be configured appropriately with that during the next call into power_pmu_enable(). Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anshuman Khandual 提交于
Completely ignore BHRB privilege state filter request as we are already configuring that with privilege state filtering attribute for the accompanying PMU event. This would help achieve cleaner user space interaction for BHRB. This patch fixes a situation like this Before patch:- ------------ ./perf record -j any -e branch-misses:k ls Error: The sys_perf_event_open() syscall returned with 95 (Operation not supported) for event (branch-misses:k). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? Here 'perf record' actually copies over ':k' filter request into BHRB privilege state filter config and our previous check in kernel would fail that. After patch:- ------------- ./perf record -j any -e branch-misses:k ls perf perf.data perf.data.old test-mmap-ring [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (~102 samples)] Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Bjorn Helgaas 提交于
Mark pnv_pci_init_ioda2_phb() as __init. It is called only from an init function (pnv_pci_init()), and it calls an init function (pnv_pci_init_ioda_phb()): pnv_pci_init # init pnv_pci_init_ioda2_phb # non-init pnv_pci_init_ioda_phb # init This should fix a section mismatch warning. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
The sllp value is stored in mmu_psize_defs in such a way that we can easily OR the value to get the operand for slbmte instruction. ie, the L and LP bits are not contiguous. Decode the bits and use them correctly in tlbie. regression is introduced by 1f6aaacc "powerpc: Update tlbie/tlbiel as per ISA doc" Reported-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
We should not fallthrough different case statements in hpte_decode. Add break statement to break out of the switch. The regression is introduced by dcda287a "powerpc/mm: Simplify hpte_decode" Reported-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Denis Kirjanov 提交于
Commit 801eb73f introduced a bug while checking PTE flags. We have to drop the _PAGE_COHERENT flag when __PAGE_NO_CACHE is set and the cache update policy is not write-through (i.e. _PAGE_WRITETHRU is not set) Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> CC: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs entries for the corresponding EEH device (then PCI device) has been added or removed, in order to avoid race condition. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch fixes following issue: Unbalanced enable for IRQ 23 ------------[ cut here ]------------ WARNING: at kernel/irq/manage.c:437 : NIP [c00000000016de8c] .__enable_irq+0x11c/0x140 LR [c00000000016de88] .__enable_irq+0x118/0x140 Call Trace: [c000003ea1f23880] [c00000000016de88] .__enable_irq+0x118/0x140 (unreliable) [c000003ea1f23910] [c00000000016df08] .enable_irq+0x58/0xa0 [c000003ea1f239a0] [c0000000000388b4] .eeh_enable_irq+0xc4/0xe0 [c000003ea1f23a30] [c000000000038a28] .eeh_report_reset+0x78/0x130 [c000003ea1f23ac0] [c000000000037508] .eeh_pe_dev_traverse+0x98/0x170 [c000003ea1f23b60] [c0000000000391ac] .eeh_handle_normal_event+0x2fc/0x3d0 [c000003ea1f23bf0] [c000000000039538] .eeh_handle_event+0x2b8/0x2c0 [c000003ea1f23c90] [c000000000039600] .eeh_event_handler+0xc0/0x170 [c000003ea1f23d30] [c0000000000da9a0] .kthread+0xf0/0x100 [c000003ea1f23e30] [c00000000000a1dc] .ret_from_kernel_thread+0x5c/0x80 Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
While restoring BARs for one specific PCI device, the pci_dev instance should have been released. So it's not reliable to use the pci_dev instance on restoring BARs. However, we still need some information (e.g. PCIe capability position, header type) from the pci_dev instance. So we have to store those information to EEH device in advance. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
When EEH error happens to one specific PE, some devices with drivers supporting EEH won't except hotplug on the device. However, there might have other deivces without driver, or with driver without EEH support. For the case, we need do partial hotplug in order to make sure that the PE becomes absolutely quite during reset. Otherise, the PE reset might fail and leads to failure of error recovery. The current code doesn't handle that 'mixed' case properly, it either uses the error callbacks to the drivers, or tries hotplug, but doesn't handle a PE (EEH domain) composed of a combination of the two. The patch intends to support so-called "partial" hotplug for EEH: Before we do reset, we stop and remove those PCI devices without EEH sensitive driver. The corresponding EEH devices are not detached from its PE, but with special flag. After the reset is done, those EEH devices with the special flag will be scanned one by one. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
When EEH error happens to one specific PE, the device drivers of its attached EEH devices (PCI devices) are checked to see the further action: reset with complete hotplug, or reset without hotplug. However, that's not enough for those PCI devices whose drivers can't support EEH, or those PCI devices without driver. So we need do so-called "partial hotplug" on basis of PCI devices. In the situation, part of PCI devices of the specific PE are unplugged and plugged again after PE reset. The patch changes pcibios_add_pci_devices() so that it can support full hotplug and so-called "partial" hotplug based on device-tree or real hardware. It's notable that pci_of_scan.c has been changed for a bit in order to support the "partial" hotplug based on dev-tree. Most of the generic code already supports that, we just need to plumb it properly on our side. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Currently, we're trasversing the EEH devices list using list_for_each_entry(). That's not safe enough because the EEH devices might be removed from its parent PE while doing iteration. The patch replaces that with list_for_each_entry_safe(). Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
When we do normal hotplug, the PE (shadow EEH structure) shouldn't be kept around. However, we need to keep it if the hotplug an artifial one caused by EEH errors recovery. Since we remove EEH device through the PCI hook pcibios_release_device(), the flag "purge_pe" passed to various functions is meaningless. So the patch removes the meaningless flag and introduce new flag "EEH_PE_KEEP" to save the PE while doing hotplug during EEH error recovery. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Since pcibios_release_device() called by pci_stop_and_remove_bus_device() has removed the device from the EEH cache, we needn't do that again. Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch overrides pcibios_release_device() to release EEH resources (EEH cache, unbinding EEH device) for the indicated PCI device. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Make some functions public in order to support hotplug on either specific PCI bus or PCI device in future. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
We will rely on pcibios_release_device() to remove the EEH cache and unbind EEH device for the specific PCI device. So we shouldn't hold the reference to the PCI device from EEH cache and EEH device. Otherwise, pcibios_release_device() won't be called as we expected. The patch removes the reference to the PCI device in EEH core. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mahesh Salgaonkar 提交于
During Machine Check interrupt on pseries platform, R3 generally points to memory region inside RTAS (FWNMI) area. We see r3 corruption because when RTAS delivers the machine check exception it passes the address inside FWNMI area with the top most bit set. This patch fixes this issue by masking top two bit in machine check exception handler. Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
The presence or absence of EBB is advertised to userspace via the presence or absence of PPC_FEATURE2_EBB in cpu_user_features2. Because the kernel can be built without PMU support, we should only add PPC_FEATURE2_EBB to cpu_user_features2 when we successfully register the power8 PMU support. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Bolle 提交于
The Kconfig symbol HOTPLUG was removed with commit 40b31360 ("Finally eradicate CONFIG_HOTPLUG"). But there's still one select statement for that symbol. It seems that select statement was added after the patch to remove CONFIG_HOTPLUG was submitted. Anyhow, it is useless and can be dropped. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tiejun Chen 提交于
In hard_irq_disable(), we accessed the PACA before we hard disabled the interrupts, potentially causing a warning as get_paca() will us debug_smp_processor_id(). Move that to after the disabling, and also use local_paca directly rather than get_paca() to avoid several redundant and useless checks. Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Module CRCs are implemented as absolute symbols that get resolved by a linker script. We build an intermediate .o that contains an unresolved symbol for each CRC. genksysms parses this .o, calculates the CRCs and writes a linker script that "resolves" the symbols to the calculated CRC. Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols that need relocating and relocates them at boot. Commit d4703aef (module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y) added a hook to reverse the bogus relocations. Part of this patch created a symbol at 0x0: # head -2 /proc/kallsyms 0000000000000000 T reloc_start c000000000000000 T .__start This reloc_start symbol is causing lots of confusion to perf. It thinks reloc_start is a massive function that stretches from 0x0 to 0xc000000000000000 and we get various cryptic errors out of perf, including: problem incrementing symbol count, skipping event This patch removes the reloc_start linker script label and instead defines it as PHYSICAL_START. We also need to wrap it with CONFIG_PPC64 because the ppc32 kernel can set a non zero PHYSICAL_START at compile time and we wouldn't want to subtract it from the CRCs in that case. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
POWER8 comes with two different PVRs. This patch enables the additional PVR in the cputable. The existing entry (PVR=0x4b) is renamed to POWER8E and the new entry (PVR=0x4d) is given POWER8. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras由 Linus Torvalds 提交于
Pull EDAC fix from Tony Luck: "Fix EDAC lockdep splat" * tag 'please-pull-bp-edac' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Fix lockdep splat
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull device tree bug fixes and maintainership updates from Grant Likely: "This branch contains a couple of minor bug fixes and documentation additions, but the bulk of it are several changes to the MAINTAINERS file regarding the subsystems I've been involved with" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: of/irq: init struct resource to 0 in of_irq_to_resource() of/irq: Avoid calling list_first_entry() for empty list of: add vendor prefixes for hisilicon of: add vendor prefix for Qualcomm Atheros, Inc. MAINTAINERS: Fix incorrect status tag MAINTAINERS: Refactor device tree maintainership MAINTAINERS: Change device tree mailing list MAINTAINERS: Remove Grant Likely
-
由 Borislav Petkov 提交于
Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: NBorislav Petkov <bp@suse.de> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: NTony Luck <tony.luck@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup changes from Tejun Heo: "This contains two patches, both of which aren't fixes per-se but I think it'd be better to fast-track them. One removes bcache_subsys_id which was added without proper review through the block tree. Fortunately, bcache cgroup code is unconditionally disabled, so this was never exposed to userland. The cgroup subsys_id is removed. Kent will remove the affected (disabled) code through bcache branch. The other simplifies task_group_path_from_hierarchy(). The function doesn't currently have in-kernel users but there are external code and development going on dependent on the function and making the function available for 3.11 would make things go smoother" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: replace task_cgroup_path_from_hierarchy() with task_cgroup_path() cgroup: remove bcache_subsys_id which got added stealthily
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This is just a regular fixes pull, mostly nouveau and i915, the i915 ones fix RC6 on Sandybridge after suspend/resume, which I think people have be wanting for quite a while! Now you shouldn't wish for more patches, as the new mutex/reservation code found a number of problems with the qxl driver, and it currently makes lockdep angry, I'm working on a set of fixes for it, but its a bit large, I'll submit them separately later today or tomorrow once I've banged on them a bit more, just warning you in advance :-)" Yeah, I'm definitely over the whole "wish for more patches" thing. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/crtc-helper: explicit DPMS on after modeset drm/i915: fix up gt init sequence fallout drm/i915: Serialize almost all register access drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight drm/i915: correctly restore fences with objects attached drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off() drm/i915: Sanitize shared dpll state drm/i915: fix long-standing SNB regression in power consumption after resume v2 drm/i915: Preserve the DDI_A_4_LANES bit from the bios drm/i915: fix pfit regression for non-autoscaled resolutions drm/i915: fix up readout of the lvds dither bit on gen2/3 drm/nouveau: do not allow negative sizes for now drm/nouveau: add falcon interrupt handler drm/nouveau: use dedicated channel for async moves on GT/GF chipsets. drm/nouveau: bump fence timeout to 15 seconds drm/nouveau: do not unpin in nouveau_gem_object_del drm/nv50/kms: fix pin refcnt leaks drm/nouveau: fix some error-path leaks in fbcon handling code drm/nouveau: fix locking issues in page flipping paths
-
由 David Howells 提交于
Fix __wait_on_atomic_t() so that it calls the action func if the counter != 0 rather than if the counter is 0 so as to be analogous to __wait_on_bit(). Thanks to Yacine who found this by visual inspection. This will affect FS-Cache in that it will could fail to sleep correctly when trying to clean up after a netfs cookie is withdrawn. Reported-by: NYacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> cc: Milosz Tanski <milosz@adfin.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha由 Linus Torvalds 提交于
Pull alpha architecture fixes from Matt Turner: "This contains mostly clean ups and fixes but also an implementation of atomic64_dec_if_positive() and a pair of new syscalls" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: Use handle_percpu_irq for the timer interrupt alpha: Force the user-visible HZ to a constant 1024. alpha: Don't if-out dp264_device_interrupt. alpha: Use __builtin_alpha_rpcc alpha: Fix type compatibility warning for marvel_map_irq alpha: Generate dwarf2 unwind info for various kernel entry points. alpha: Implement atomic64_dec_if_positive alpha: Improve atomic_add_unless alpha: Modernize lib/mpi/longlong.h alpha: Add kcmp and finit_module syscalls alpha: locks: remove unused arch_*_relax operations alpha: kernel: typo issue, using '1' instead of '11' alpha: kernel: using memcpy() instead of strcpy() alpha: Convert print_symbol to %pSR
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull vhost fixes from Michael Tsirkin: "vhost: more fixes for 3.11 This includes some fixes for vhost net and scsi drivers. The test module has already been reworked to avoid rcu usage, but the necessary core changes are missing, we fixed this. Unlikely to affect any real-world users, but it's early in the cycle so, let's merge them" (It was earlier when Michael originally sent the email, but it somehot got missed in the flood, so here it is after -rc2) * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: Remove custom vhost rcu usage vhost-scsi: Always access vq->private_data under vq mutex vhost-net: Always access vq->private_data under vq mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse bugfixes from Miklos Szeredi: "These are bugfixes and a cleanup to the "readdirplus" feature" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: readdirplus: cleanup fuse: readdirplus: change attributes once fuse: readdirplus: fix instantiate fuse: readdirplus: sanity checks fuse: readdirplus: fix dentry leak
-