- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2007 1 次提交
-
-
由 David S. Miller 提交于
Do this even for non-blocking sockets. This avoids the silly -EAGAIN that applications can see now, even for non-blocking sockets in some cases (f.e. connect()). With help from Venkat Tekkirala. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 12月, 2006 1 次提交
-
-
由 David S. Miller 提交于
When this code was converted to use sk_for_each() the logic for the "best hash chain length" code was reversed, breaking everything. The original code was of the form: size = 0; do { if (++size >= best_size_so_far) goto next; } while ((sk = sk->next) != NULL); best_size_so_far = size; best = result; next:; and this got converted into: sk_for_each(sk2, node, head) if (++size < best_size_so_far) { best_size_so_far = size; best = result; } Which does something very very different from the original. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2006 7 次提交
-
-
由 Gerrit Renker 提交于
This patch consolidates set/getsockopt code between UDP(-Lite) v4 and 6. The justification is that UDP(-Lite) is a transport-layer protocol and therefore the socket option code (at least in theory) should be AF-independent. Furthermore, there is the following code reduplication: * do_udp{,v6}_getsockopt is 100% identical between v4 and v6 * do_udp{,v6}_setsockopt is identical up to the following differerence --v4 in contrast to v4 additionally allows the experimental encapsulation types UDP_ENCAP_ESPINUDP and UDP_ENCAP_ESPINUDP_NON_IKE --the remainder is identical between v4 and v6 I believe that this difference is of little relevance. The advantages in not duplicating twice almost completely identical code. The patch further simplifies the interface of udp{,v6}_push_pending_frames, since for the second argument (struct udp_sock *up) it always holds that up = udp_sk(sk); where sk is the first function argument. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
... into anonymous union of __wsum and __u32 (csum and csum_offset resp.) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
udp_push_pending_frames is only referenced within net/ipv4/udp.c and hence can remain static. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2006 1 次提交
-
-
由 Olaf Kirch 提交于
Make udp_encap_rcv use pskb_may_pull IPsec with NAT-T breaks on some notebooks using the latest e1000 chipset, when header split is enabled. When receiving sufficiently large packets, the driver puts everything up to and including the UDP header into the header portion of the skb, and the rest goes into the paged part. udp_encap_rcv forgets to use pskb_may_pull, and fails to decapsulate it. Instead, it passes it up it to the IKE daemon. Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 10月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
UDP tracks corking status through the pending variable. The IP layer also tracks it through the socket write queue. It is possible for the two to get out of sync when MSG_PROBE is used. This patch changes UDP to check the write queue to ensure that the two stay in sync. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2006 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
->faddr is net-endian; annotated as such, variables inferred to be net-endian annotated. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 6 次提交
-
-
由 David S. Miller 提交于
This also kills a warning while building ipv6: net/ipv6/udp.c: In function ‘udp_v6_get_port’: net/ipv6/udp.c:66: warning: passing argument 3 of ‘udp_get_port’ from incompatible pointer type Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It is not referenced outside of net/ipv4/udp.c any longer. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This patch creates one common function which is called by udp_v4_get_port() and udp_v6_get_port(). As a result, * duplicated code is removed * udp_port_rover and local port lookup can now be removed from udp.h * further savings follow since the same function will be used by UDP-Litev4 and UDP-Litev6 In contrast to the patch sent in response to Yoshifujis comments (fixed by this variant), the code below also removes the EXPORT_SYMBOL(udp_port_rover), since udp_port_rover can now remain local to net/ipv4/udp.c. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Bligh 提交于
Signed-off-by: NMartin Bligh <mbligh@google.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Patrick McHardy 提交于
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose checksum still needs to be completed) and CHECKSUM_COMPLETE (for incoming packets, device supplied full checksum). Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Yekkirala 提交于
This labels the flows that could utilize IPSec xfrms at the points the flows are defined so that IPSec policy and SAs at the right label can be used. The following protos are currently not handled, but they should continue to be able to use single-labeled IPSec like they currently do. ipmr ip_gre ipip igmp sit sctp ip6_tunnel (IPv6 over IPv6 tunnel device) decnet Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2006 1 次提交
-
-
由 Panagiotis Issaris 提交于
Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 21 3月, 2006 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
No code changes, just tidying up, in some cases moving EXPORT_SYMBOLs to just after the function exported, etc. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Mishin 提交于
This patch extends {get|set}sockopt compatibility layer in order to move protocol specific parts to their place and avoid huge universal net/compat.c file in the future. Signed-off-by: NDmitry Mishin <dim@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
Keep the conntrack reference until policy checks have been performed for IPsec NAT support. The reference needs to be dropped before a packet is queued to avoid having the conntrack module unloadable. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2006 3 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Since udp_checksum_init always returns 0 there is no point in having it return a value. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When a packet is obtained from skb_recv_datagram with MSG_PEEK enabled it is left on the socket receive queue. This means that when we detect a checksum error we have to be careful when trying to free the packet as someone could have dequeued it in the time being. Currently this delicate logic is duplicated three times between UDPv4, UDPv6 and RAWv6. This patch moves them into a one place and simplifies the code somewhat. This is based on a suggestion by Eric Dumazet. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2005 1 次提交
-
-
由 Herbert Xu 提交于
Here is the patch that introduces the generic skb_checksum_complete which also checks for hardware RX checksum faults. If that happens, it'll call netdev_rx_csum_fault which currently prints out a stack trace with the device name. In future it can turn off RX checksum. I've converted every spot under net/ that does RX checksum checks to use skb_checksum_complete or __skb_checksum_complete with the exceptions of: * Those places where checksums are done bit by bit. These will call netdev_rx_csum_fault directly. * The following have not been completely checked/converted: ipmr ip_vs netfilter dccp This patch is based on patches and suggestions from Stephen Hemminger and David S. Miller. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 9月, 2005 1 次提交
-
-
由 Stephen Hemminger 提交于
A UDP packet may contain extra data that needs to be trimmed off. But when doing so, UDP forgets to fixup the skb checksum if CHECKSUM_HW is being used. I think this explains the case of a NFS receive using skge driver causing 'udp hw checksum failures' when interacting with a crufty settop box. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2005 3 次提交
-
-
由 Eric Dumazet 提交于
This patch puts mostly read only data in the right section (read_mostly), to help sharing of these data between CPUS without memory ping pongs. On one of my production machine, tcp_statistics was sitting in a heavily modified cache line, so *every* SNMP update had to force a reload. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Lots of places just needs the states, not even linux/tcp.h, where this enum was, needs it. This speeds up development of the refactorings as less sources are rebuilt when things get moved from net/tcp.h. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 8月, 2005 1 次提交
-
-
由 Heikki Orsila 提交于
Here's a small patch to cleanup NETDEBUG() use in net/ipv4/ for Linux kernel 2.6.13-rc5. Also weird use of indentation is changed in some places. Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2005 1 次提交
-
-
由 Herbert Xu 提交于
Steven Hand <Steven.Hand@cl.cam.ac.uk> wrote: > > Reconstructed forward trace: > > net/ipv4/udp.c:1334 spin_lock_irq() > net/ipv4/udp.c:1336 udp_checksum_complete() > net/core/skbuff.c:1069 skb_shinfo(skb)->nr_frags > 1 > net/core/skbuff.c:1086 kunmap_skb_frag() > net/core/skbuff.h:1087 local_bh_enable() > kernel/softirq.c:0140 WARN_ON(irqs_disabled()); The receive queue lock is never taken in IRQs (and should never be) so we can simply substitute bh for irq. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2005 1 次提交
-
-
由 Jesper Juhl 提交于
Ross moved. Remove the bad email address so people will find the correct one in ./CREDITS. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 20 4月, 2005 1 次提交
-
-
由 Herbert Xu 提交于
The following patch just makes the header part of the skb writeable. This is needed since we modify the IP headers just a few lines below. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-