Add a private data pointer to usbnet for rndis_wlan module to use.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Export rndis_host functions and also rename rndis_bind() to
generic_rndis_bind() for modules using rndis_host as base.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Split up rndis_host.c into rndis_host.h and rndis_base.c. This is done so
that rndis_wlan can reuse common parts with rndis_host.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use wlan device name for RNDIS wireless devices.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NBjorge Dijkstra <bjd@jooz.net>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RNDIS packet filter flags are not exactly the same as CDC flags
so we cannot reuse them.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NBjorge Dijkstra <bjd@jooz.net>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When bind fails after device was initialized, shutdown device properly
by sending RNDIS_MSG_HALT.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NBjorge Dijkstra <bjd@jooz.net>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rndis_command requires the caller to pass in a buffer of at least 1KB.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NBjorge Dijkstra <bjd@jooz.net>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just as ActiveSync devices, some regular RNDIS devices also lack
the CDC descriptors (e.g. devices based on BCM4320 WLAN chip).
This patch hardwires the CDC descriptors for all RNDIS style devices
when they are missing.
Signed-off-by: NBjorge Dijkstra <bjd@jooz.net>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rndis_unbind and usbnet_cdc_unbind don't return anything.
Signed-off-by: NBjorge Dijkstra <bjd@jooz.net>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Card reported by Ångström user:
http://bugs.openembedded.net/show_bug.cgi?id=3236

Socket 1:
   product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", ""
   manfid: 0x0156, 0x0002
   function: 6 (network)
Signed-off-by: NMarcin Juszkiewicz <openembedded@haerwu.biz>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were two identical prototypes for hostap_80211_rx() in
drivers/net/wireless/hostap/hostap_80211.h.

This patch fixes kernel Bugzilla #8930.

Reported by Christoph Burger-Scheidlin.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch does fix incorrect counting of memory allocated by kmalloc.
It seems that could lead to allocated memory overrun and corrupt
nearlaid memory area.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Acked-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously I've got an interrupt while removing the driver.
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixing unaligned memory access on the blackfin architecture (maybe on the
ARM also).
Signed-off-by: NIhar Hrachyshka <ihar.hrachyshka@promwad.com>
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

w/o the first change: if end == start you get MAX_JIFFY_OFFSET which
isn't what you want...

For the latter I think to be technically correct you need the +1 to
account for the jiffy between MAX_JIFFY_OFFSET and 0

(hmm w/ the 2nd change the first isn't strictly needed... ah well)
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Teach rfkill about wimax radios.

Had to define a KEY_WIMAX as a 'key for disabling only wimax radios',
as other radio technologies have. This makes sense as hardware has
specific keys for disabling specific radios.

The RFKILL enabling part is, otherwise, a copy and paste of any other
radio technology.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We must not transmit packets we're not able to encrypt.

This fixes a bug where in a tiny timeframe after machine resume
packets can get sent unencrypted and might leak information.

This also fixes three small resource leakages I spotted while fixing
the security problem. Properly deallocate the DMA slots in any DMA
allocation error path.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes suspend/resume.

We must not overwrite the MAC addresses on resume. Otherwise
the card won't ACK any packets anymore.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The problem is that priv->assoc_id is set when assoc. resp frame is
received. But, when it is set, LQ cmd is still not sent to the uCode, it is
done from bg_post_assoc, which is called through a workqueue.

On the other hand, when a tx arrives at the moment when this flag is set,
but LQ is still not sent, the if condition in tx_skb will not hold and
the frame will not be dropped.  Thus, it will be sent through
which is still not in the sta table in the uCoded.
Signed-off-by: NGregory Greenman <gregory.greenman@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nic controller's scheduler interrupt (CSR_INT_BIT_SCD) indicates
to the driver that scheduler finished to transmit the frame/frames.
This bit is not used and the tasklet should thus not be scheduled upon
its receipt.
Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Be consistent when using inline functions. If the function only used
once we move it to where it is used - no need for externs.
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The geo/channel information is obtained from the EEPROM, which is read
during probe. We can thus set up channel information at this time. This
helps us to support ioctl commands that rely on this before the interface
is brought up.

Clearly matches _init_channel_map with _free_channel_map and _init_geos
with _free_geos to ensure functions calling these routines can also call
their cleanup routines.

Fixes a few bugs:
- if channel information is not available when ioctl commands are
  issued then we get a NULL pointer oops. Having channel information
  set up during probe we can deal with ioctl commands without requiring
  interface to be brought up.
  This fixes bug: http://www.bughost.org/bugzilla/show_bug.cgi?id=1552
- Fix potential problem if user triggers probe/remove/probe sequence. The
  value of priv->channel_count was used to determine if channel map is
  set up. This value was never reset when channel map was removed.
- Fix memory leak: priv->modes need to be freed when device removed.
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a fix to patch "iwlwifi: fix iwl_mac_add_interface handler".
In that patch the return code was corrected for iwl3945, but not for
iwl4965.
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Cc: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMaarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I have been using the rtl8180 driver via the git kernel route for a while now and would like to suggest that the following local ammendment is included in the development tree in order to support the PCI device 1799:700f.

This device is found on the 'Belkin Wireless G Desktop Card' product, model 'F5D7000uk'.  From memory, the chip on the card is inscribed RTL8185L;  (I don't know the significance of the 'L', I'm afraid).
Signed-off-by: NAdrian Bassett <adrian.bassett@hotmail.co.uk>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a wrong condition for null qos data frames, causing us to
drop data frames needed for reordering as well.
Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This zeros out all microcode related memory before loading
the microcode.

This also fixes initialization of the MAC control register.
The _only_ place where we overwrite the contents of the MAC control
register is at the beginning of b43_chip_init().
All other places must do read() -> mask/set -> write() to not
overwrite existing bits.

This also adds a longer delay for waiting for the microcode
to initialize itself. It seems that the current timeout is sufficient
on all available devices, but there's no real reason why we shouldn't
wait for up to one second. Slow embedded devices might exist.
Better safe than sorry.

While at it, fix naming of MACCTL values.

This patch by Michael Buesch has been ported to b43legacy.
Signed-off-by: NStefano Brivio <stefano.brivio@polimi.it>
Acked-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We must kill rfkill in any error paths that trigger after rfkill init.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Acked-by: NStefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We must kill rfkill in any error paths that trigger after rfkill init.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* use only one debug level for beacon debugging: unify ATH5K_DEBUG_BEACON and
ATH5K_DEBUG_BEACON_PROC.

* remove debug level ATH5K_DEBUG_FATAL. doesn't make sense as a debug level -
if it's fatal it should be logged as an error.

* fancier printing of debug levels. cat /debugfs/ath5k/phy0/debug.

* allow debug levels to be changed by echoing their name into
/debugfs/ath5k/phy0/debug. this will toggle the state, when it was off it will
be turned on and vice versa.

* use copy_from_user() when reading from the debug files. use unsigned int for
better optimization. reduce buffer sizes on stack.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/debug.c:     Changes-licensed-under: GPL
drivers/net/wireless/ath5k/debug.h:     Changes-licensed-under: GPL
Signed-off-by: NBruno Randolf <bruno@thinktube.com>
Acked-by: NLuis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Acked-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When I introduced the alignment warning I forgot the A-MSDU case which
has a different requirement because each frame contains 14-byte 802.3
headers in front of the IP payload. This patch moves the alignment
warning to a place where we know whether we're dealing with an A-MSDU
frame and adjusts it accordingly.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A subtle merge error was introduced after re-queueing a patch for 2.6.24
instead of 2.6.25...
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It may be used by the modules nfs.ko and sunrpc.ko
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
[ Made it a regular export rather than GPL-only  - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
  Remove commented-out code copied from NFS
  NFS: Switch from intr mount option to TASK_KILLABLE
  Add wait_for_completion_killable
  Add wait_event_killable
  Add schedule_timeout_killable
  Use mutex_lock_killable in vfs_readdir
  Add mutex_lock_killable
  Use lock_page_killable
  Add lock_page_killable
  Add fatal_signal_pending
  Add TASK_WAKEKILL
  exit: Use task_is_*
  signal: Use task_is_*
  sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
  ptrace: Use task_is_*
  power: Use task_is_*
  wait: Use TASK_NORMAL
  proc/base.c: Use task_is_*
  proc/array.c: Use TASK_REPORT
  perfmon: Use task_is_*
  ...

Fixed up conflicts in NFS/sunrpc manually..

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  debug: turn ignore_loglevel into an early param
  sched: remove unused params
  sched: let +nice tasks have smaller impact
  sched: fix high wake up latencies with FAIR_USER_SCHED
  RCU: add help text for "RCU implementation type"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (299 commits)
  [ALSA] version 1.0.16rc2
  [ALSA] hda: fix Mic in as output
  [ALSA] emu10k1 - Another EMU0404 Board ID
  [ALSA] emu10k1 - Fix kthread handling at resume
  [ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.
  [ALSA] emu10k1 - Use enum for emu_model types
  [ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards
  [ALSA] emu10k1 - 1616(M) cardbus improvements
  [ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.
  [ALSA] emu10k1: Add comments regarding E-Mu ins and outs.
  [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
  [ALSA] es1938 - improve capture hw pointer reads
  [ALSA] HDA-Intel - Add support for Intel SCH
  [ALSA] hda: Add GPIO mute support to STAC9205
  [ALSA] hda-codec - Add Dell T3400 support
  [ALSA] hda-codec - Add model for HP DV9553EG laptop
  [ALSA] hda-codec - Control SPDIF as slave
  [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's
  [ALSA] Fix Oops with PCM OSS sync
  [ALSA] hda-codec - Add speaker automute to ALC262 HP models
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  asm-generic/tlb.h: build fix
  x86: uninline __pte_free_tlb() and __pmd_free_tlb()
  x86: fix small sparse warning
  x86: fix sparse warning in kernel/scx200_32.c
  x86: early_ioremap_reset fix 2
  x86: c_p_a clflush_cache_range fix
  x86: change_page_attr_clear fix
  x86: fix sparse warnings in intel_cacheinfo.c

i was debugging early crashes and wondered where all the printks
went. The reason: ignore_loglevel_setup() was not called yet ...
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This removes the extra struct task_struct *p parameter in inc_nr_running
and dec_nr_running functions.

Signed-off by: Jerry Stralko <gerb.stralko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Michel Dänzr has bisected an interactivity problem with
plus-reniced tasks back to this commit:

 810e95cc is first bad commit
 commit 810e95cc
 Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
 Date:   Mon Oct 15 17:00:14 2007 +0200

 sched: another wakeup_granularity fix

      unit mis-match: wakeup_gran was used against a vruntime

fix this by assymetrically scaling the vtime of positive reniced
tasks.
Bisected-by: NMichel Dänzer <michel@tungstengraphics.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>