- 09 7月, 2016 6 次提交
-
-
由 Octavian Purdila 提交于
This patch allows SSDTs to be loaded from EFI variables. It works by specifying the EFI variable name containing the SSDT to be loaded. All variables with the same name (regardless of the vendor GUID) will be loaded. Note that we can't use acpi_install_table and we must rely on the dynamic ACPI table loading and bus re-scanning mechanisms. That is because I2C/SPI controllers are initialized earlier then the EFI subsystems and all I2C/SPI ACPI devices are enumerated when the I2C/SPI controllers are initialized. Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Octavian Purdila 提交于
This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Acked-by: NMark Brown <broonie@kernel.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Octavian Purdila 提交于
This patch adds supports for I2C device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Acked-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Octavian Purdila 提交于
Add support for ACPI reconfiguration notifiers to allow subsystems to react to changes in the ACPI tables that happen after the initial enumeration. This is similar with the way dynamic device tree notifications work. The reconfigure notifications supported for now are device add and device remove. Since ACPICA allows only one table notification handler, this patch makes the table notifier function generic and moves it out of the sysfs specific code. Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Octavian Purdila 提交于
If the ACPI tables change as a result of a dinamically loaded table and a bus rescan is required the enumeration/visited flag are not consistent. I2C/SPI are not directly enumerated in acpi_bus_attach(), however the visited flag is set. This makes it impossible to check if an ACPI device has already been enumerated by the I2C and SPI subsystems. To fix this issue we only set the visited flags if the device is not I2C or SPI. With this change we also need to remove setting visited to false from acpi_bus_attach(), otherwise if we rescan already enumerated I2C/SPI devices we try to re-enumerate them. Note that I2C/SPI devices can be enumerated either via a scan handler (when using PRP0001) or via regular device_attach(). In either case the flow goes through acpi_default_enumeration() which makes it the ideal place to mark the ACPI device as enumerated. Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Octavian Purdila 提交于
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 22 6月, 2016 5 次提交
-
-
由 Jon Masters 提交于
This patch adds support for ACPI_TABLE_UPGRADE for ARM64 To access initrd image we need to move initialization of linear mapping a bit earlier. The implementation of the feature acpi_table_upgrade() (drivers/acpi/tables.c) works with initrd data represented as an array in virtual memory. It uses some library utility to find the redefined tables in that array and iterates over it to copy the data to new allocated memory. So to access the initrd data via fixmap we need to rewrite it considerably. In x86 arch, kernel memory is already mapped by the time when acpi_table_upgrade() and acpi_boot_table_init() are called so I think that we can just move this mapping one function earlier too. Signed-off-by: NJon Masters <jcm@redhat.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@linaro.org> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Aleksey Makarov 提交于
We want to use the table upgrade feature in ARM64. Introduce a new configuration option that allows that. Signed-off-by: NAleksey Makarov <aleksey.makarov@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Aleksey Makarov 提交于
The constant that defines max phys address where the new upgraded ACPI table should be allocated is arch-specific. Move it to <asm/acpi.h> Signed-off-by: NAleksey Makarov <aleksey.makarov@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Aleksey Makarov 提交于
Refer initrd_start, initrd_end directly from drivers/acpi/tables.c. This allows to use the table upgrade feature in architectures other than x86. Also this simplifies header files. The patch renames acpi_table_initrd_init() to acpi_table_upgrade() (what reflects the purpose of the function) and removes the unneeded wraps early_acpi_table_init() and early_initrd_acpi_init(). Signed-off-by: NAleksey Makarov <aleksey.makarov@linaro.org> Acked-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Aleksey Makarov 提交于
The new memory allocated in acpi_table_initrd_init() is used to copy the upgraded tables to it. So it should be mapped with early_memunmap() instead of early_ioremap(). This is critical for ARM. Signed-off-by: NAleksey Makarov <aleksey.makarov@linaro.org> Acked-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 20 6月, 2016 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull UDF fixes and a reiserfs fix from Jan Kara: "A couple of udf fixes (most notably a bug in parsing UDF partitions which led to inability to mount recent Windows installation media) and a reiserfs fix for handling kstrdup failure" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: check kstrdup failure udf: Use correct partition reference number for metadata udf: Use IS_ERR when loading metadata mirror file entry udf: Don't BUG on missing metadata partition descriptor
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine fixes from Vinod Koul: "Some fixes has piled up, so time to send them upstream. These fixes include: - at_xdmac fixes for residue and other stuff - update MAINTAINERS for dma dt bindings - mv_xor fix for incorrect offset" * tag 'dmaengine-fix-4.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mv_xor: Fix incorrect offset in dma_map_page() dmaengine: at_xdmac: double FIFO flush needed to compute residue dmaengine: at_xdmac: fix residue corruption dmaengine: at_xdmac: align descriptors on 64 bits MAINTAINERS: Add file patterns for dma device tree bindings
-
- 19 6月, 2016 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Another batch of fixes for ARM SoC platforms. Most are smaller fixes. Two areas that are worth pointing out are: - OMAP had a handful of changes to voltage specs that caused a bit of churn, most of volume of change in this branch is due to this. - There are a couple of _rcuidle fixes from Paul that touch common code and came in through the OMAP tree since they were the ones who saw the problems. The rest is smaller changes across a handful of platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits) ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218 ARM: OMAP2+: timer: add probe for clocksources ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing arm: Use _rcuidle for smp_cross_call() tracepoints MAINTAINERS: Add myself as reviewer of ARM FSL/NXP ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON ARM: imx6ul: Fix Micrel PHY mask ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX ARM: dts: DRA74x: fix DSS PLL2 addresses ARM: OMAP2: Enable Errata 430973 for OMAP3 ARM: dts: socfpga: Add missing PHY phandle ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile ...
-
https://github.com/rogerq/linux由 Olof Johansson 提交于
OMAP-GPMC: Fixes for for v4.7-rc cycle: - Fix omap gpmc EXTRADELAY timing. The DT provided timings were wrongly used causing devices requiring extra delay timing to fail. * tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux: memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing + Linux 4.7-rc3 Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.7-rc cycle: - Fix dra7 for hardware issues limiting L4Per and L3init power domains to on state. Without this the devices may not work correctly after some time of use because of asymmetric aging. And related to this, let's also remove the unusable states. - Always select omap interconnect for am43x as otherwise the am43x only configurations will not boot properly. This can happen easily for any product kernels that leave out other SoCs to save memory. - Fix DSS PLL2 addresses that have gone unused for now - Select erratum 430973 for omap3, this is now safe to do and can save quite a bit of debugging time for people who may have left it out. * tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX ARM: dts: DRA74x: fix DSS PLL2 addresses ARM: OMAP2: Enable Errata 430973 for OMAP3 + Linux 4.7-rc2 Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.7-rc cycle: - Two boot warning fixes from the RCU tree that should have gotten merged several weeks ago already but did not because of issues with who merges them. Paul has now split the RCU warning fixes into sets for various maintainers. - Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes - Fix PM for omap3 boards using timer12 and gptimer, like the original beagleboard - Fix hangs on am437x-sk-evm by lowering the I2C bus speed * tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218 ARM: OMAP2+: timer: add probe for clocksources ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ arm: Use _rcuidle for smp_cross_call() tracepoints arm: Use _rcuidle tracepoint to allow use from idle Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Lee Jones 提交于
This patch fixes a non-booting issue in Mainline. When booting with a compressed kernel, we need to be careful how we populate memory close to DDR start. AUTO_ZRELADDR is enabled by default in multi-arch enabled configurations, which place some restrictions on where the kernel is placed and where it will be uncompressed to on boot. AUTO_ZRELADDR takes the decompressor code's start address and masks out the bottom 28 bits to obtain an address to uncompress the kernel to (thus a load address of 0x42000000 means that the kernel will be uncompressed to 0x40000000 i.e. DDR START on this platform). Even changing the load address to after the co-processor's shared memory won't render a booting platform, since the AUTO_ZRELADDR algorithm still ensures the kernel is uncompressed into memory shared with the first co-processor (0x40000000). Another option would be to move loading to 0x4A000000, since this will mean the decompressor will decompress the kernel to 0x48000000. However, this would mean a large chunk (0x44000000 => 0x48000000 (64MB)) of memory would essentially be wasted for no good reason. Until we can work with ST to find a suitable memory location to relocate co-processor shared memory, let's disable the shared memory nodes. This will ensure a working platform in the mean time. NB: The more observant of you will notice that we're leaving the DMU shared memory node enabled; this is because a) it is the only one in active use at the time of this writing and b) it is not affected by the current default behaviour which is causing issues. Fixes: fe135c63 (ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory) Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by Peter Griffin <peter.griffin@linaro.org> Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes The i.MX fixes for 4.7: - Correct Micrel PHY mask to fix the issue that i.MX6UL ethernet works in U-Boot but not in kernel. * tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx6ul: Fix Micrel PHY mask Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A couple of fixes for pmd_mknotpresent()/pmd_present() for LPAE systems" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8579/1: mm: Fix definition of pmd_mknotpresent ARM: 8578/1: mm: ensure pmd_present only checks the valid bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a bunch (65) of USB fixes for 4.7-rc4. Sorry about the quantity, I've been slow in getting these out. The majority are the "normal" gadget, musb, and xhci fixes, that we all are used to. There are also a few other tiny fixes resolving a number of reported issues that showed up in 4.7-rc1. All of these have been in linux-next" * tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits) usbip: rate limit get_frame_number message usb: musb: sunxi: Remove bogus "Frees glue" comment usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musb usb: echi-hcd: Add ehci_setup check before echi_shutdown usb: host: ehci-msm: Conditionally call ehci suspend/resume MAINTAINERS: Add file patterns for usb device tree bindings usb: host: ehci-tegra: Avoid getting the same reset twice usb: host: ehci-tegra: Grab the correct UTMI pads reset USB: mos7720: delete parport USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails phy: ti-pipe3: Program the DPLL even if it was already locked usb: musb: Stop bulk endpoint while queue is rotated usb: musb: Ensure rx reinit occurs for shared_fifo endpoints usb: musb: host: correct cppi dma channel for isoch transfer usb: musb: only restore devctl when session was set in backup usb: phy: Check initial state for twl6030 usb: musb: Use normal module_init for 2430 glue usb: musb: Remove pm_runtime_set_irq_safe usb: musb: Remove extra PM runtime calls from 2430 glue layer usb: musb: Return error value from musb_mailbox ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull IIO and staging fixes from Greg KH: "Here are a number of IIO and staging bugfixes for 4.7-rc4. Nothing huge, the normal amount of iio driver fixes, and some small staging driver bugfixes for some reported problems (2 are reverts of patches that went into 4.7-rc1). All have been in linux-next with no reported issues" * tag 'staging-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits) Revert "Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of sizeof type." Revert "Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)" staging: lustre: lnet: Don't access NULL NI on failure path iio: hudmidity: hdc100x: fix incorrect shifting and scaling iio: light apds9960: Add the missing dev.parent iio: Fix error handling in iio_trigger_attach_poll_func iio: st_sensors: Disable DRDY at init time iio: st_sensors: Init trigger before irq request iio: st_sensors: switch to a threaded interrupt iio: light: bh1780: assign a static name iio: bh1780: dereference the client properly iio: humidity: hdc100x: fix IIO_TEMP channel reporting iio:st_pressure: fix sampling gains (bring inline with ABI) iio: proximity: as3935: fix buffer stack trashing iio: proximity: as3935: remove triggered buffer processing iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output max44000: Remove scale from proximity iio: humidity: am2315: Remove a stray unlock iio: humidity: hdc100x: correct humidity integration time mask iio: pressure: bmp280: fix error message for wrong chip id ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core fixes from Greg KH: "Here are a small number of debugfs, ISA, and one driver core fix for 4.7-rc4. All of these resolve reported issues. The ISA ones have spent the least amount of time in linux-next, sorry about that, I didn't realize they were regressions that needed to get in now (thanks to Thorsten for the prodding!) but they do all pass the 0-day bot tests. The others have been in linux-next for a while now. Full details about them are in the shortlog below" * tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: isa: Dummy isa_register_driver should return error code isa: Call isa_bus_init before dependent ISA bus drivers register watchdog: ebc-c384_wdt: Allow build for X86_64 iio: stx104: Allow build for X86_64 gpio: Allow PC/104 devices on X86_64 isa: Allow ISA-style drivers on modern systems base: make module_create_drivers_dir race-free debugfs: open_proxy_open(): avoid double fops release debugfs: full_proxy_open(): free proxy on ->open() failure kernel/kcov: unproxify debugfs file's fops
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are a small number of char and misc driver fixes for 4.7-rc4. They resolve some minor issues that have been reported, and have all been in linux-next" * tag 'char-misc-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: coresight: Handle build path error coresight: Fix erroneous memset in tmc_read_unprepare_etr coresight: Fix tmc_read_unprepare_etr coresight: Fix NULL pointer dereference in _coresight_build_path extcon: palmas: Fix boot up state of VBUS when using GPIO detection mcb: Acquire reference to carrier module in core mcb: Acquire reference to device in probe mei: don't use wake_up_interruptible for wr_ctrl
-
- 18 6月, 2016 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "The most user visible change here is a fix for our recent superblock validation checks that were causing problems on non-4k pagesized systems" * 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: btrfs_check_super_valid: Allow 4096 as stripesize btrfs: remove build fixup for qgroup_account_snapshot btrfs: use new error message helper in qgroup_account_snapshot btrfs: avoid blocking open_ctree from cleaner_kthread Btrfs: don't BUG_ON() in btrfs_orphan_add btrfs: account for non-CoW'd blocks in btrfs_abort_transaction Btrfs: check if extent buffer is aligned to sectorsize btrfs: Use correct format specifier
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fix from Rafael Wysocki: "Revert a recent ACPICA commit that introduced a suspend-to-RAM regression on one system due to incorrect information in its ACPI tables that had not been taken into consideration at all before (and everything worked), but the commit in question started to use it" * tag 'acpi-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "Fixes for two recent regressions that may lead to degraded performance (operating performance points framework, intel_pstate). Specifics: - Fix a recent regression in the intel_pstate driver that may lead to degraded performance on some systems due to missing turbo state entry in the table returned by the ACPI _PSS object (Srinivas Pandruvada). - Fix a recent regression in the OPP (operating performance points) framework that may lead to degraded performance on some systems where the OPP table is created too early (Viresh Kumar)" * tag 'pm-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / OPP: Add 'UNKNOWN' status for shared_opp in struct opp_table cpufreq: intel_pstate: Adjust _PSS[0] freqeuency if needed
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID subsystem fixes from Jiri Kosina: - kernel panic fix in hid-elo from Oliver Neukum - Surface Pro 3 device quirk from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: multitouch: Add MT_QUIRK_NOT_SEEN_MEANS_UP to Surface Pro 3 HID: elo: kill not flush the work
-
由 William Breathitt Gray 提交于
The inline isa_register_driver stub simply allows compilation on systems with CONFIG_ISA disabled; the dummy isa_register_driver does not register an isa_driver at all. The inline isa_register_driver should return -ENODEV to indicate lack of support when attempting to register an isa_driver on such a system with CONFIG_ISA disabled. Cc: Matthew Wilcox <matthew@wil.cx> Reported-by: NSasha Levin <sasha.levin@oracle.com> Tested-by: Ye Xiaolong Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 William Breathitt Gray 提交于
The isa_bus_init function must be called before drivers which utilize the ISA bus driver are registered. A race condition for initilization exists if device_initcall is used (the isa_bus_init callback is placed in the same initcall level as dependent drivers which use module_init). This patch ensures that isa_bus_init is called first by utilizing postcore_initcall in favor of device_initcall. Fixes: a5117ba7 ("[PATCH] Driver model: add ISA bus") Cc: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 William Breathitt Gray 提交于
With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the WinSystems EBC-C384 watchdog timer driver to ISA_BUS_API, thus allowing it to build for X86_64 as it is expected to. Cc: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 William Breathitt Gray 提交于
With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the Apex Embedded Systems STX104 DAC driver to ISA_BUS_API, thus allowing it to build for X86_64 as it is expected to. Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: NJonathan Cameron <jic23@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 William Breathitt Gray 提交于
With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the PC/104 drivers to ISA_BUS_API, thus allowing them to build for X86_64 as they are expected to. Cc: Alexandre Courbot <gnurou@gmail.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 William Breathitt Gray 提交于
Several modern devices, such as PC/104 cards, are expected to run on modern systems via an ISA bus interface. Since ISA is a legacy interface for most modern architectures, ISA support should remain disabled in general. Support for ISA-style drivers should be enabled on a per driver basis. To allow ISA-style drivers on modern systems, this patch introduces the ISA_BUS_API and ISA_BUS Kconfig options. The ISA bus driver will now build conditionally on the ISA_BUS_API Kconfig option, which defaults to the legacy ISA Kconfig option. The ISA_BUS Kconfig option allows the ISA_BUS_API Kconfig option to be selected on architectures which do not enable ISA (e.g. X86_64). The ISA_BUS Kconfig option is currently only implemented for X86 architectures. Other architectures may have their own ISA_BUS Kconfig options added as required. Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
It's annoying to constantly see the same "Not yet implemented" message over and over with nothing able to be done about it, so rate limit it for now to keep user's logs "clean". Reported-by: NLars Täuber <lars.taeuber@web.de> Tested-by: NLars Täuber <lars.taeuber@web.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rafael J. Wysocki 提交于
* acpica-fixes: Revert "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()"
-
由 Rafael J. Wysocki 提交于
* pm-opp: PM / OPP: Add 'UNKNOWN' status for shared_opp in struct opp_table * pm-cpufreq-fixes: cpufreq: intel_pstate: Adjust _PSS[0] freqeuency if needed
-
由 Hans de Goede 提交于
This reverts commit b5e12ec3 ("Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of sizeof type."). This commit is wrong, the rtw_malloc2d helper function takes the size of the array elements as its 3th argument, whereas sizeof(*eFuseWord) gives the size of a pointer instead of the size of a u16. Since sizeof(void *) > sizeof(u16) this has no adverse effects, but it is still wrong. Cc: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hans de Goede 提交于
This reverts commit 99aded71 ("Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)"). This commit is wrong, as adapt->HalData has a type of "void *", so now we are allocating a much to small struct, which causes the driver to overwrite random memory which leads to a non working driver and various system crashes. Cc: Jacky Boen <aqiank@gmail.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-