Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4l2_m2m_poll didn't support events, but that's essential if you want to
be able to use control events for example.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The g_mbus_fmt operation only needs to return the current mbus frame
format and doesn't need to configure the hardware to do so. Fix it to
avoid requiring the chip to be powered on when calling the operation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The g_mbus_fmt operation only needs to return the current mbus frame
format and doesn't need to configure the hardware to do so. Fix it to
avoid requiring the chip to be powered on when calling the operation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The g_mbus_fmt operation only needs to return the current mbus frame
format and doesn't need to configure the hardware to do so. Fix it to
avoid requiring the chip to be powered on when calling the operation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There will be no soc_camera_device instance with a soc-camera device is
used with a non soc-camera host, so we won't be able to pass the
soc_camera_device fake platform device to board code. Pass the physical
device instead.

The argument is currently not used by any board file so this is safe.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The soc-camera module exports functions that are needed by soc-camera
client drivers even when not running in soc-camera mode. Replace the
platform_driver_probe() with a platform_driver_register() call to avoid
module load failures if no soc-camera device is present.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Zero all fields after the first type field.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The VIDIOC_DV_TIMINGS_CAP ioctl check wasn't added to determine_valid_ioctls().
This caused this ioctl to always return -ENOTTY.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The auto selection of pertinent helper chips (VIDEO_HELPER_CHIPS_AUTO)
should select the ADV7343 and THS7303 driver, which is used by VPIF
display driver.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add generic build configuration for vpif capture
and display drivers as it is common for DM6467/DA850/OMAP-L138.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add clock enable and disable in probe and remove functions.
Probe will succeed only if the device clock is provided instead of
assuming that the clock is always enabled. VPIF clock has to be
dealt with during suspend and resume. Implement power management
callbacks to VPIF driver to disable/enable clock on suspend/resume
respectively.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement power management operations - suspend and resume as part of
dev_pm_ops for VPIF capture driver.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement power management operations - suspend and resume as part of
dev_pm_ops for VPIF display driver.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add hardware clipping support for VPIF output data. This
is needed as it is possible that the external encoder
might get confused between the FF or 00 which are a part
of the data and that of the SAV or EAV codes.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch migrates VPIF display driver to videobuf2 framework.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch migrates VPIF capture driver to videobuf2 framework.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Size up the memory for the buffers from the buffer pool allocated in board
file.  Then adjust the reqbuf count depending the available memory.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Size up the memory for the buffers from the buffer pool allocated in board
file.  Then adjust the reqbuf count depending the available memory.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

fix setting of data width in config_vpif_params() function,
which was wrongly set.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

omap-l138 shares the interrupt between capture and display.
Make sure we are able to request for the same irq number
by making a shared irq request.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

change the dm646x specific strings in the driver to make
them generic across platforms. In this case change all the
strings which have a dm646x connotation to vpif which is a
platform independent ip.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As the same interrupt is shared between capture and display devices,
sometimes we get isr calls where the interrupt might not genuinely belong
to capture or display. Hence, add a condition in the isr to check for
interrupt ownership and channel number to make sure we do not
service wrong interrupts.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

from commit a8f3c203
restore the mapping scheme for uncached buffers,
which was changed in a common scheme for cached and uncached.
This apparently was wrong, and was probably intended only for cached buffers.
the fix fixes the crash observed while mapping uncached buffers.
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NHadli, Manjunath <manjunath.hadli@ti.com>
Acked-by: NFederico Vaga <federico.vaga@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This driver consists of 2 parts, a generic tea5777 driver and a driver
for the Griffin radioSHARK v2 USB radio receiver, which is the only driver
using the generic tea5777 for now.

This first version only implements FM support, once the the new
VIDIOC_ENUM_FREQ_BANDS API is upstream I'll also add AM support.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Commit efbceecd, adds a number of helper
functions for ctrl related ioctls to v4l2-ioctl.c, these helpers assume that
if file->private_data != NULL, it points to a v4l2_fh, which is only the case
for drivers which actually use v4l2_fh.

This breaks for example bttv which use the "filedata" pointer for its own uses,
and now all the ctrl ioctls try to use whatever its filedata points to as
v4l2_fh and think it has a ctrl_handler, leading to:

[  142.499214] BUG: unable to handle kernel NULL pointer dereference at 0000000000000021
[  142.499270] IP: [<ffffffffa01cb959>] v4l2_queryctrl+0x29/0x230 [videodev]
[  142.514649]  [<ffffffffa01c7a77>] v4l_queryctrl+0x47/0x90 [videodev]
[  142.517417]  [<ffffffffa01c58b1>] __video_do_ioctl+0x2c1/0x420 [videodev]
[  142.520116]  [<ffffffffa01c7ee6>] video_usercopy+0x1a6/0x470 [videodev]
...

This patch adds the missing test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags) tests
to the ctrl ioctl helpers v4l2_fh paths, fixing the issues with for example
the bttv driver.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

And document V4L2_CID_AUTOBRIGHTNESS.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When the v4l2_device release handler gets called the kobject under
vdev->dev has already been released, so we cannot use kobject_name on
it (which video_device_node_name does).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As it cannot be changed while streaming.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These are broken with my test cam and I've been unable to fix them.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The konica needs a freaking large time (circa 6.5 seconds) to "boot", and
does not want to be bothered while doing so, so sleep for 6 seconds, and
then query its status register at 100ms intervals until it becomes ready.

This removes the "reg_w err: -32" messages shown in dmesg whenever a
konica cam gets initialized, and also fixes the camera not working when
an app tries to use it directly after it has been plugged in and after
a suspend/resume cycle.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

1) The gspca-core's suspend/resume code is such that resume being called after
a reset is safe / ok.

2) All devices tested sofar seem to need the reset_resume callback to work
properly over a suspend

3) The USB-core won't call the reset_resume callback for devices which don't
need it

Thus it seems the simplest and the best to just add the callback to all
sub-drivers, rather then adding the callbacks one-by-one as each driver gets
tested with suspend/resume.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Various gspca-subdrivers have a JPEG quality control which only changes
the quantization tables in the JPEG headers send to user-space without
making any changes to the settings of the bridge. Remove these bogus / wrong
controls.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>