Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 163
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 12 11月, 2014 19 次提交
  3. 10 11月, 2014 6 次提交
    • M
      bnx2fc: fix tgt spinlock locking · dc6311dd
      由 Maurizio Lombardi 提交于 
      bnx2fc_queuecommand(): when allocating a new io_req, the tgt_lock
spinlock must be locked before calling bnx2fc_cmd_alloc().

The spinlock should also be kept locked until bnx2fc_post_io_req() has
been completed.
If not, a kernel thread may call bnx2fc_process_cq_compl() that extracts
the newly allocated io_req from hba->cmd_mgr->cmds and destroys it while
it is still being used by bnx2fc_post_io_req().

BUG: unable to handle kernel NULL pointer dereference at 000000000000004c
IP: [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc]
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.3/net/eth3/type
CPU 33
Modules linked in: autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc 8021q garp scsi_tgt stp llc cpufreq_ondemand freq_table pcc_cpufreq ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 power_meter microcode iTCO_wdt iTCO_vendor_support hpilo hpwdt sg bnx2x libcrc32c mdio serio_raw lpc_ich mfd_core shpchp ext4 jbd2 mbcache sd_mod crc_t10dif hpsa video output dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]

Pid: 7355, comm: bnx2fc_thread/3 Not tainted 2.6.32-431.el6.x86_64 #1 HP ProLiant BL460c Gen8
RIP: 0010:[<ffffffffa03130da>]  [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc]
RSP: 0018:ffff8820b0da3b68  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff882003801080 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff882003801100
RBP: ffff8820b0da3bc8 R08: ffffffff8160d4e8 R09: 0000000000000040
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88400e600e00
R13: ffff8840108fbe40 R14: ffff88200ffe5400 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8820b0da0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 000000000000004c CR3: 0000002010b67000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process bnx2fc_thread/3 (pid: 7355, threadinfo ffff88401f940000, task ffff884012f5f540)
Stack:
 ffff8820b0da3bc8 ffffffff81527303 ffff884000000020 ffff8820b0da3bd8
<d> ffff8820b0da3b98 000000028138931a ffff88400f506078 ffff88400e600e00
<d> ffff88200ffe5400 ffff88200ffe5590 0000000000000021 0000000000000002
Call Trace:
 <IRQ>
 [<ffffffff81527303>] ? printk+0x41/0x46
 [<ffffffffa03169bc>] bnx2fc_post_io_req+0x11c/0x440 [bnx2fc]
 [<ffffffff812825b9>] ? cpumask_next_and+0x29/0x50
 [<ffffffff8137ffd0>] ? scsi_done+0x0/0x60
 [<ffffffffa0316df7>] bnx2fc_queuecommand+0x117/0x140 [bnx2fc]
 [<ffffffff81380245>] scsi_dispatch_cmd+0xe5/0x310
 [<ffffffff81388b9e>] scsi_request_fn+0x5ee/0x7a0
 [<ffffffff812658f1>] __blk_run_queue+0x31/0x40
 [<ffffffff81265a40>] blk_run_queue+0x30/0x50
 [<ffffffff81387da6>] scsi_run_queue+0xc6/0x270
 [<ffffffff81260f92>] ? elv_requeue_request+0x52/0xa0
 [<ffffffff813897a0>] scsi_requeue_command+0x90/0xb0
 [<ffffffff81389b84>] scsi_io_completion+0x154/0x6c0
 [<ffffffff8137ff62>] scsi_finish_command+0xc2/0x130
 [<ffffffff8138a255>] scsi_softirq_done+0x145/0x170
 [<ffffffff8126e865>] blk_done_softirq+0x85/0xa0
 [<ffffffff8107a8e1>] __do_softirq+0xc1/0x1e0
 [<ffffffff8100c30c>] ? call_softirq+0x1c/0x30
 [<ffffffff8100c30c>] call_softirq+0x1c/0x30
 <EOI>
 [<ffffffff8100fa75>] ? do_softirq+0x65/0xa0
 [<ffffffff8107a40a>] local_bh_enable_ip+0x9a/0xb0
 [<ffffffff8152a4eb>] _spin_unlock_bh+0x1b/0x20
 [<ffffffffa0313937>] bnx2fc_process_cq_compl+0x257/0x2b0 [bnx2fc]
 [<ffffffffa03114ea>] bnx2fc_percpu_io_thread+0xea/0x160 [bnx2fc]
 [<ffffffffa0311400>] ? bnx2fc_percpu_io_thread+0x0/0x160 [bnx2fc]
 [<ffffffff8109aef6>] kthread+0x96/0xa0
 [<ffffffff8100c20a>] child_rip+0xa/0x20
 [<ffffffff8109ae60>] ? kthread+0x0/0xa0
 [<ffffffff8100c200>] ? child_rip+0x0/0x20
Code: 89 df 45 8b 7e 30 0f 85 75 01 00 00 89 d1 31 c0 c1 e9 03 83 e2 04 89 c9 f3 48 ab 74 06 c7 07 00 00 00 00 49 89 9c 24 88 01 00 00 <83> 7e 4c 01 b8 01 00 00 00 0f 84 e7 00 00 00 89 c2 0a 53 38 41
RIP  [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc]
 RSP <ffff8820b0da3b68>
CR2: 000000000000004c
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Acked-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      dc6311dd
    • J
      megaraid_sas: fix bug in handling return value of pci_enable_msix_range() · c12de882
      由 Jiang Liu 提交于 
      Function pci_enable_msix_range() may return negative values for error
conditions. So it's a bug by checking (pci_enable_msix_range() != 0)
for success and causes failure to megaraid driver when MSI is disabled.
[   16.487267] megaraid_sas 0000:02:00.0: Controller type: iMR
[   16.487275] genirq: Flags mismatch irq 0. 00000000 (megasas) vs. 00015a00 (tii
mer)
[   16.487347] megasas: Failed to register IRQ for vector 0.

Fixes: 8ae80ed1 "megaraid: Use pci_enable_msix_range() instead of pci_enable_msix()"
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Acked-by: NSumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # 3.17
      c12de882
    • A
      cxgb4i: send abort_rpl correctly · 7b07bf24
      由 Anish Bhatt 提交于 
      Connection retries were not being cleaned up correctly if they failed as a
result of link down. Applies on top of drivers-for-3.18.
Signed-off-by: NAnish Bhatt <anish@chelsio.com>
Signed-off-by: NKaren Xie <kxie@chelsio.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      7b07bf24
    • W
      scsi: TUR path is down after adapter gets reset with multipath · 333b2448
      由 wenxiong@linux.vnet.ibm.com 提交于 
      This patch fixes an issue with multipath ipr SAS devices which require a
start unit command to be issued following an adapter reset. Without this
patch, paths get marked failed following an adapter reset and since the
error handler never gets invoked to issue the start unit, the paths are
never recovered. Returning FAILED for this case ensures the error
handler wakes up to issue the start unit.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Tested-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      333b2448
    • C
      scsi: call device handler for failed TUR command · e925cc43
      由 Christoph Hellwig 提交于 
      Multipath devices using the TUR path checker need to see the sense
code for a failed TUR command in their device handler.  Since commit
14216561 we always return success for mid
layer issued TUR commands before calling the device handler, which
stopped the TUR path checker from working.

Move the call to the device handler check sense method before the early
return for TUR commands to give the device handler a chance to intercept
them.
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Tested-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
      e925cc43
    • C
      scsi: only re-lock door after EH on devices that were reset · 48379270
      由 Christoph Hellwig 提交于 
      Setups that use the blk-mq I/O path can lock up if a host with a single
device that has its door locked enters EH.  Make sure to only send the
command to re-lock the door to devices that actually were reset and thus
might have lost their state.  Otherwise the EH code might be get blocked
on blk_get_request as all requests for non-reset devices might be in use.

Cc: stable@vger.kernel.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NMeelis Roos <meelis.roos@ut.ee>
Tested-by: NMeelis Roos <meelis.roos@ut.ee>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
      48379270
  5. 08 11月, 2014 6 次提交
  7. 07 11月, 2014 2 次提交
    • J
      USB: cdc-acm: add quirk for control-line state requests · 2a8cdfde
      由 Johan Hovold 提交于 
      Add new quirk for devices that cannot handle control-line state
requests.

Note that we currently send these requests to all devices, regardless of
whether they claim to support it, but that errors are only logged if
support is claimed.

Since commit 0943d8ea ("USB: cdc-acm: use tty-port dtr_rts"), which
only changed the timings for these requests slightly, this has been
reported to cause occasional firmware crashes on Simtec Electronics
Entropy Key devices after re-enumeration. Enable the quirk for this
device.
Reported-by: NNix <nix@esperi.org.uk>
Tested-by: NNix <nix@esperi.org.uk>
Cc: stable <stable@vger.kernel.org>	# v3.16
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2a8cdfde
    • F
      tty: Fix pty master poll() after slave closes v2 · c4dc3046
      由 Francesco Ruggeri 提交于 
      Commit f95499c3 ("n_tty: Don't wait for buffer work in read() loop")
introduces a race window where a pty master can be signalled that the pty
slave was closed before all the data that the slave wrote is delivered.
Commit f8747d4a ("tty: Fix pty master read() after slave closes") fixed the
problem in case of n_tty_read, but the problem still exists for n_tty_poll.
This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done'
where test.py is:

import os, select, pty

(pid, pty_fd) = pty.fork()

if pid == 0:
   os.write(1, 'This string should be received by parent')
else:
   poller = select.epoll()
   poller.register( pty_fd, select.EPOLLIN )
   ready = poller.poll( 1 * 1000 )
   for fd, events in ready:
      if not events & select.EPOLLIN:
         print 'missed POLLIN event'
      else:
         print os.read(fd, 100)
   poller.close()

The string from the slave is missed several times.
This patch takes the same approach as the fix for read and special cases
this condition for poll.
Tested on 3.16.
Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c4dc3046
  9. 06 11月, 2014 7 次提交