Properly initialize MD recovery flags when resuming device-mapper devices.

When a device-mapper device is suspended, all I/O must stop.  This is done by
calling 'md_stop_writes' and 'mddev_suspend'.  These calls in-turn manipulate
the recovery flags - including setting 'MD_RECOVERY_FROZEN'.  The DM device
may have been suspended while recovery was not yet complete, so the process
needs to pick-up where it left off.  Since 'mddev_resume' does not unset
'MD_RECOVERY_FROZEN' and set 'MD_RECOVERY_NEEDED', we must do it ourselves.
'MD_RECOVERY_NEEDED' can safely be set in 'mddev_resume', but 'MD_RECOVERY_FROZEN'
must be set outside of 'mddev_resume' due to how MD handles RAID reshaping.
(e.g.  It is possible for a user to delay reshaping a RAID5->RAID6 by purposefully
setting 'MD_RECOVERY_FROZEN'.  Clearing it in 'mddev_resume' would override the
desired behavior.)

Because 'mddev_resume' already unconditionally calls 'md_wakeup_thread(mddev->thread)'
there is no need to make this call from 'raid_resume' since it calls 'mddev_resume'.

Also clean up where  level_store calls mddev_resume() - it current
duplicates some of the funcitons of that call. - NB
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

We always should have allowed this.  A raid5 reshape doesn't change
the size of the bitmap, so not need to restrict it.

Also add a test to make sure we don't try to start a reshape on a
failed array.
Signed-off-by: NNeilBrown <neilb@suse.de>

If a reshape changes the size of the array, then we can now
update the bitmap to suit - so do so.
Signed-off-by: NNeilBrown <neilb@suse.de>

Now that bitmaps can be resized, we can allow an array to be resized
while the bitmap is present.

This only covers resizing that involves changing the effective size
of member devices, not resizing that changes the number of devices.
Signed-off-by: NNeilBrown <neilb@suse.de>

As a reshape may change the sync_size and/or chunk_size, we need
to update these whenever we write out the bitmap superblock.
Signed-off-by: NNeilBrown <neilb@suse.de>

This function will allocate the new data structures and copy
bits across from old to new, allowing for the possibility that the
chunksize has changed.

Use the same function for performing the initial allocation
of the structures.  This improves test coverage.

When bitmap_resize is used to resize an existing bitmap, it
only copies '1' bits in, not '0' bits.
So when allocating the bitmap, ensure everything is initialised
to ZERO.
Signed-off-by: NNeilBrown <neilb@suse.de>

Also take the opportunity to simplify CHUNK_BLOCK_RATIO.
Signed-off-by: NNeilBrown <neilb@suse.de>

The new "struct bitmap_counts" contains all the fields that are
related to counting the number of active writes in each bitmap chunk.

Having this separate will make it easier to change the chunksize
or overall size of a bitmap atomically.
Signed-off-by: NNeilBrown <neilb@suse.de>

This allows us to remove spinlock protection which is
more heavy-weight than simple atomics.
Signed-off-by: NNeilBrown <neilb@suse.de>

Using e.g. set_bit instead of __set_bit and using test_and_clear_bit
allow us to remove some locking and contract other locked ranges.

It is rare that we set or clear a lot of these bits, so gain should
outweigh any cost.
Signed-off-by: NNeilBrown <neilb@suse.de>

There functions really do one thing together: release the
'bitmap_storage'.  So make them just one function.

Since we removed the locking (previous patch), we don't need to zero
any fields before freeing them, so it all becomes a bit simpler.
Signed-off-by: NNeilBrown <neilb@suse.de>

There is no real value in freeing things the moment there is an error.
It is just as good to free the bitmap file and pages when the bitmap
is explicitly removed (and replaced?) or at shutdown.

With this gone, the bitmap will only disappear when the array is
quiescent, so we can remove some locking.

As the 'filemap' doesn't disappear now, include extra checks before
trying to write any of it out.
Also remove the check for "has it disappeared" in
bitmap_daemon_write().
Signed-off-by: NNeilBrown <neilb@suse.de>

All of these sites can only be called from process context with
irqs enabled, so using irqsave/irqrestore just adds noise.
Remove it.
Signed-off-by: NNeilBrown <neilb@suse.de>

We currently use '&' and '|' which isn't the norm in the kernel
and doesn't allow easy atomicity.
So change to bit numbers and {set,clear,test}_bit.
This allows us to remove a spinlock/unlock (which was dubious anyway)
and some other simplifications.
Signed-off-by: NNeilBrown <neilb@suse.de>

Just do single-bit manipulations on bitmap->flags and copy whole
value between that and sb->state.

This will allow next patch which changes how bit manipulations are
performed on bitmap->flags.

This does result in BITMAP_STALE not being set in sb by
bitmap_read_sb, however as the setting is determined by other
information in the 'sb' we do not lose information this way.
Normally, bitmap_load will be called shortly which will clear
BITMAP_STALE anyway.
Signed-off-by: NNeilBrown <neilb@suse.de>

This function isn't really needed.  It sets or clears a flag in both
bitmap->flags and sb->state.
However both times it is called, bitmap_update_sb is called soon
afterwards which copies bitmap->flags to sb->state.
So just make changes to bitmap->flags, and open-code those rather than
hiding in a function.
Signed-off-by: NNeilBrown <neilb@suse.de>

We should allocate memory for the storage-bitmap at create-time, not
load time.
Signed-off-by: NNeilBrown <neilb@suse.de>

This will allow allocation before swapping in a new bitmap.
Signed-off-by: NNeilBrown <neilb@suse.de>

This number is more generally useful, and bytes-in-last-page is
easily extracted from it.
Signed-off-by: NNeilBrown <neilb@suse.de>

This new 'struct bitmap_storage' reflects the external storage of the
bitmap.
Having this clearly defined will make it easier to change the storage
used while the array is active.
Signed-off-by: NNeilBrown <neilb@suse.de>

Most often we have the page number, not the page.  And that is what
the  *_page_attr() functions really want.  So change the arguments to
take that number.
Signed-off-by: NNeilBrown <neilb@suse.de>

Instead of allocating pages in read_sb_page, read_page and
bitmap_read_sb, allocate them all in bitmap_init_from disk.

Also replace the hack of calling "attach_page_buffers(page, NULL)" to
ensure that free_buffer() won't complain, by putting a test for
PagePrivate in free_buffer().
Signed-off-by: NNeilBrown <neilb@suse.de>

An md bitmap comprises two parts
 - internal counting of active writes per 'chunk'.
 - external storage of whether there are any active writes on
   each chunk

The second requires the first, but the first doesn't require the
second.

Not having backing storage means that the bitmap cannot expedite
resync after a crash, but it still allows us to expedite the recovery
of a recently-removed device.

So: allow a bitmap to exist even if there is no backing device.
In that case we default to 128M chunks.

A particular value of this is that we can remove and re-add a bitmap
(possibly of a different granularity) on a degraded array, and not
lose the information needed to fast-recover the missing device.

We don't actually activate these bitmaps yet - that will come
in a later patch.
Signed-off-by: NNeilBrown <neilb@suse.de>

If we are to allow bitmaps to be resized when the array is resized,
we need to know how much space there is.

So create an attribute to store this information and set appropriate
defaults.

It can be set more precisely via sysfs, or future metadata extensions
may allow it to be recorded.
Signed-off-by: NNeilBrown <neilb@suse.de>

There are two different 'pending' concepts in the handling of the
write intent bitmap.

Firstly, a 'page' from the bitmap (which container PAGE_SIZE*8 bits)
may have changes (bits cleared) that should be written in due course.
There is no hurry for these and the page will transition from
PENDING to NEEDWRITE and will then be written, though if it ever
becomes DIRTY it will be written much sooner and PENDING will be
cleared.

Secondly, a page of counters - which contains PAGE_SIZE/2 counters, one
for each bit, can usefully have a 'pending' flag which indicates if
any of the counters are low (2 or 1) and ready to be processed by
bitmap_daemon_work().  If this flag is clear we can skip the whole
page.

These two concepts are currently combined in the bitmap-file flag.
This causes a tighter connection between the counters and the bitmap
file than I would like - as I want to add some flexibility to the
bitmap file.

So introduce a new flag with the page-of-counters, and rewrite
bitmap_daemon_work() so that it handles the two different 'pending'
concepts separately.

This also allows us to clear BITMAP_PAGE_PENDING when we write out
a dirty page, which may occasionally reduce the number of times we
write a page.
Signed-off-by: NNeilBrown <neilb@suse.de>

REQ_SYNC is ignored in current raid5 code. Block layer does use it to do
policy,
for example ioscheduler. This patch adds it.
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

The two variables are useless.
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

If the allocation of rep1_bio fails, we currently don't free the 'bio'
of the same dev.

Reported by kmemleak.
Signed-off-by: Nmajianpeng <majianpeng@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

When attempting to fix a read error, it is acceptable to read from a
device that is recovering, provided the recovery has got past the
place we are reading from.  This makes the test for "can we read from
here" the same as the test in read_balance.
Signed-off-by: Nmajianpeng <majianpeng@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

This ensures that it is always freed - there were case where
we failed to free the page.
Reported-by: Nmajianpeng <majianpeng@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

dm-raid currently open-codes the freeing of some members of
and rdev.  It is more maintainable to have it call common code
from md.c which does this for all call-sites.

So remove free_disk_sb to md_rdev_clear, export it, and use it in
dm-raid.c
Signed-off-by: NNeilBrown <neilb@suse.de>

Reorders functions in raid6_algos as well as the preference check
to reduce the number of functions tested on initialization.

Also, creates symmetry between choosing the gen_syndrome functions
and choosing the recovery functions.
Signed-off-by: NJim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Test each combination of recovery and syndrome generation
functions.
Signed-off-by: NJim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Add SSSE3 optimized recovery functions, as well as a system
for selecting the most appropriate recovery functions to use.
Originally-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NJim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

<linux/module.h> drags in headers which are not visible to userspace,
thus breaking the build for the test program.
Signed-off-by: NJim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Optimize RAID5 xor checksumming by taking advantage of
256-bit YMM registers introduced in AVX.
Signed-off-by: NJim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

With CONFIG_PREEMPT=y, we need to disable preemption while benchmarking
RAID5 xor checksumming to ensure we're actually measuring what we think
we're measuring.
Signed-off-by: NJim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

In the existing do_xor_speed(), there is no guarantee that we actually
run do_2() for a full jiffy. We get the current jiffy, then run do_2()
until the next jiffy.

Instead, let's get the current jiffy, then wait until the next jiffy
to start our test.
Signed-off-by: NJim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

A 'near' or 'offset' lay RAID10 array can be reshaped to a different
'near' or 'offset' layout, a different chunk size, and a different
number of devices.
However the number of copies cannot change.

Unlike RAID5/6, we do not support having user-space backup data that
is being relocated during a 'critical section'.  Rather, the
data_offset of each device must change so that when writing any block
to a new location, it will not over-write any data that is still
'live'.

This means that RAID10 reshape is not supportable on v0.90 metadata.

The different between the old data_offset and the new_offset must be
at least the larger of the chunksize multiplied by offset copies of
each of the old and new layout. (for 'near' mode, offset_copies == 1).

A larger difference of around 64M seems useful for in-place reshapes
as more data can be moved between metadata updates.
Very large differences (e.g. 512M) seem to slow the process down due
to lots of long seeks (on oldish consumer graded devices at least).

Metadata needs to be updated whenever the place we are about to write
to is considered - by the current metadata - to still contain data in
the old layout.

[unbalanced locking fix from Dan Carpenter <dan.carpenter@oracle.com>]
Signed-off-by: NNeilBrown <neilb@suse.de>

We will soon be interpreting the layout (and chunksize etc) from
multiple places to support reshape.  So split it out into separate
function.
Signed-off-by: NNeilBrown <neilb@suse.de>