The current mpic code creates a linear revmap just big enough for all
the sources, which happens to miss the IPIs and timers on some machines.

This will in turn break when the irqdomain code loses the fallback of
doing a linear search when the revmap fails (and really slows down IPIs
otherwise).

This happens for example on the U4 based Apple machines such as the
dual core PowerMac G5s.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 9778b696 accidentally added
a .rej file (probably my fault), remove it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This reverts commit fbd24153.

This commit is subtly buggy: kstrto*int() can return an error but
it's not checked in every path. simple_strtoul() on the other hand
could not fail, so this patch subtly intruduces new failure modes.
Signed-off-by: NShuah Khan <shuahkhan@gmail.com>
Link: http://lkml.kernel.org/r/1338424803.3569.5.camel@lorien2Signed-off-by: NIngo Molnar <mingo@kernel.org>

This enables the new EXYNOS5 platforms in the defconfig, and enables DT
support on EXYNOS4.

Other options enabled: USB host, EXT3/4, regulators and tps65090,
networking and a few of the common usb ethernet adapters as well as the
smsc911x controller used on some boards.

I enabled EFI_PARTITION, since it's used on some filesystem images I'm
using. I didn't see a need to keep Solaris and BSD partition format
still enabled.

Finally, framebuffer console, logo and fonts were enabled.

Note that enabling some of these options introduces build coverage
previously missing, thus introducing a few build errors and warnings
for which fixes have been sent out already.
Signed-off-by: NOlof Johansson <olof@lixom.net>
[kgene.kim@samsung.com: restored exynos4_defconfig from original]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This SoC has two PWM channels
Signed-off-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: NRoland Stigge <stigge@antcom.de>

Signed-off-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: NRoland Stigge <stigge@antcom.de>

LPC32xx SoC has a 128 bits unique id that can be used as a system
serial number, if none has been provided by atags or dt.
Signed-off-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: NRoland Stigge <stigge@antcom.de>

Signed-off-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: NRoland Stigge <stigge@antcom.de>

Fixups are executed once the pci-device is found which is during boot
process so __init seems fine as long as the platform does not support
hotplug.
However it is possible to remove the PCI bus at run time and have it
rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call
the fixups again.

[ralf@linux-mips.org: Made piixirqmap[] in malta_piix_func0_fixup()
__initdata.]
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit: 37778088 [bug.h: need linux/kernel.h
for TAINT_WARN.] breaks all MIPS builds.

  CC      arch/mips/kernel/machine_kexec.o
In file included from include/linux/kernel.h:20:0,
                 from include/asm-generic/bug.h:35,
                 from /home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bug.h:41,
                 from /home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bitops.h:20,
                 from include/linux/bitops.h:22,
                 from include/linux/signal.h:38,
                 from include/linux/elfcore.h:5,
                 from include/linux/kexec.h:60,
                 from arch/mips/kernel/machine_kexec.c:9:
include/linux/log2.h: In function '__ilog2_u32':
include/linux/log2.h:34:2: error: implicit declaration of function 'fls' [-Werror=implicit-function-declaration]
include/linux/log2.h: In function '__ilog2_u64':
include/linux/log2.h:42:2: error: implicit declaration of function 'fls64' [-Werror=implicit-function-declaration]
include/linux/log2.h: In function '__roundup_pow_of_two':
include/linux/log2.h:63:2: error: implicit declaration of function 'fls_long' [-Werror=implicit-function-declaration]
In file included from include/linux/bitops.h:22:0,
                 from include/linux/signal.h:38,
                 from include/linux/elfcore.h:5,
                 from include/linux/kexec.h:60,
                 from arch/mips/kernel/machine_kexec.c:9:
/home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bitops.h: At top level:
/home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bitops.h:615:19: error: static declaration of 'fls' follows non-static declaration
include/linux/log2.h:34:9: note: previous implicit declaration of 'fls' was here
In file included from /home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bitops.h:651:0,
                 from include/linux/bitops.h:22,
                 from include/linux/signal.h:38,
                 from include/linux/elfcore.h:5,
                 from include/linux/kexec.h:60,
                 from arch/mips/kernel/machine_kexec.c:9:
include/asm-generic/bitops/fls64.h:18:28: error: static declaration of 'fls64' follows non-static declaration
include/linux/log2.h:42:9: note: previous implicit declaration of 'fls64' was here
In file included from include/linux/signal.h:38:0,
                 from include/linux/elfcore.h:5,
                 from include/linux/kexec.h:60,
                 from arch/mips/kernel/machine_kexec.c:9:
include/linux/bitops.h:160:24: error: conflicting types for 'fls_long'
include/linux/log2.h:63:16: note: previous implicit declaration of 'fls_long' was here
cc1: all warnings being treated as errors

make[2]: *** [arch/mips/kernel/machine_kexec.o] Error 1
Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: yuasa@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Linuxppc-dev <linuxppc-dev@ozlabs.org>
Cc: Linux MIPS Mailing List <linux-mips@linux-mips.org>
Cc: Linux-sh list <linux-sh@vger.kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Patchwork: https://patchwork.linux-mips.org/patch/4000/Tested-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since we have delayed irq enabling to ->smp_finish()
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Just to catch a potential issue.
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3852/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To prevent a problem as commit 5fbd036b [sched: Cleanup cpu_active madness]
and commit 2baab4e9 [sched: Fix select_fallback_rq() vs cpu_active/cpu_online]
try to resolve, move set_cpu_online() to the brought up CPU and with irq
disabled.
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3851/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We have move irq enable to ->smp_finish. Place ->smp_finish() a little
late to prepare for move set_cpu_online() into start_secondary.
And it's not necessary to call cpu_set(cpu, cpu_callin_map) and
synchronise_count_slave() with irq enabled.
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3850/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To prepare for smoothing set_cpu_[active|online]() mess up
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3848/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To prepare for smoothing set_cpu_[active|online]() mess up
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3847/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To prepare for smoothing set_cpu_[active|online]() mess up
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3846/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To prepare for smoothing set_cpu_[active|online]() mess up
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3845/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When building oprofile as a module for R10000 or R7000 class processors,
E9000 or MIPSxx class cores since 3572a2c3
[MIPS: make oprofile use cp0_perfcount_irq if it is set] an

ERROR: "cp0_compare_irq" [arch/mips/oprofile/oprofile.ko] undefined!

error will happen.  Fixed by exporting cp0_compare_irq.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The IPsec clock bit is 18 and not 17.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: mpm@selenic.com
Cc: herbert@gondor.apana.org.au
Patchwork: https://patchwork.linux-mips.org/patch/3323/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

cc1: warnings being treated as errors
arch/mips/kernel/perf_event_mipsxx.c:166: error: 'counters_per_cpu_to_total' defined but not used
make[2]: *** [arch/mips/kernel/perf_event_mipsxx.o] Error 1
make[2]: *** Waiting for unfinished jobs....

It was first introduced by 82091564 [MIPS:
perf: Add support for 64-bit perf counters.] in 3.2.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: david.daney@cavium.com
Patchwork: https://patchwork.linux-mips.org/patch/3357/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

show_backtrace() was passed a NULL pointer which caused paging
request fail. Set to current task as other architectures (ARM,
etc) do when passed a NULL task pointer.
Signed-off-by: NVincent Wen <vincentwenlinux@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/3524/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
Cc: Danny Kukawka <dkukawka@suse.de>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3369/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt. If there were one however
compilation would fail with

	error: $variablename causes a section type conflict

because a section containing const variables is marked read only and so
cannot contain non-const variables.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel@pengutronix.de
Patchwork: https://patchwork.linux-mips.org/patch/3565/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix the following build breakage in v3.4-rc1:

  CC      kernel/irq_work.o
In file included from include/linux/irq_work.h:4:0,
                 from kernel/irq_work.c:10:
include/linux/llist.h: In function 'llist_del_all':
include/linux/llist.h:178:2: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3568/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NLeonid Yegoshin <yegoshin@mips.com>
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3792/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3883/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

warning: (BCM47XX_BCMA) selects BCMA_DRIVER_PCI_HOSTMODE which has unmet direct dependencies (BCMA_POSSIBLE && BCMA && MIPS && BCMA_HOST_PCI)
warning: (BCM47XX_BCMA) selects BCMA_DRIVER_PCI_HOSTMODE which has unmet direct dependencies (BCMA_POSSIBLE && BCMA && MIPS && BCMA_HOST_PCI)
Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3882/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Extractd from Steven J. Hill's https://patchwork.linux-mips.org/patch/3603/.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Improper alignment can lead to unbootable systems and/or random
crashes.

[ralf@linux-mips.org: This is a lond standing bug since
6eb10bc9 (kernel.org) rsp.
c422a10917f75fd19fa7fe070aaaa23e384dae6f (lmo) [MIPS: Clean up linker script
using new linker script macros.] so dates back to 2.6.32.]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/3881/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

There are ACPI and SMB devices in the 0x1000..0x1fff address range.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3581/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[ralf@linux-mips.org: Cosmetic changes; also fixed up r2300_switch.S and
octeon_switch.S which needed similar modifications.]
Signed-off-by: NLeonid Yegoshin <yegoshin@mips.com>
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3784/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This affects certain 4Kc cores.
Signed-off-by: NDouglas Leung <douglas@mips.com>
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3855/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove usage of the '__attribute__((alias("...")))' hack that aliased
to integer arrays containing micro-assembled instructions. This hack
breaks when building a microMIPS kernel. It also makes the code much
easier to understand.

[ralf@linux-mips.org: Added back export of the clear_page and copy_page
symbols so certain modules will work again.  Also fixed build with
CONFIG_SIBYTE_DMA_PAGEOPS enabled.]
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3866/Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's a bloody bog standard MIPS64R2 core with just a new PrId ID.  Iow
that essentially means Linux just panics because it doesn't know how to
name the core.

[ralf@linux-mips.org: Split original patch into several smaller patches.]
Signed-off-by: NLeonid Yegoshin <yegoshin@mips.com>
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3792/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Adding core definitions for Altera's SOCFPGA ARM platform.
Mininum support for Altera's SOCFPGA Cyclone 5 hardware.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Reviewed-by: NPavel Machek <pavel@denx.de>
Reviewed-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

On Origen board, we have 2 status leds, so adding them as heartbeat and
mmc0 by default. The patch basically adds the platform data required by
leds-gpio driver.
Signed-off-by: NRicardo Salveti de Araujo <ricardo.salveti@linaro.org>
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>