Mostly copy/paste whitespace damage with a couple of nitpicks by
the checkpatch script. Fix the struct definition as requested by Ingo too.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
LKML-Reference: <1266880143-24943-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
--
 arch/x86/kernel/apic/hw_nmi.c |   14 +++++------
 arch/x86/kernel/traps.c       |    6 ++--
 include/linux/nmi.h           |    2 -
 kernel/nmi_watchdog.c         |   51 ++++++++++++++++++++----------------------
 4 files changed, 36 insertions(+), 37 deletions(-)

Ingo provided me a config that fails to compile with:

  arch/x86/built-in.o: In function
  `arch_trigger_all_cpu_backtrace': (.text+0x17e78): undefined
  reference to `apic' make: *** [.tmp_vmlinux1] Error 1

I realized I changed the compile behaviour of the nmi code by
not wrapping it with CONFIG_LOCAL_APIC.  To fix this I add a
compile check for ARCH_HAS_NMI_WATCHDOG around
arch_trigger_all_cpu_backtrace.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: a.p.zijlstra@chello.nl
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
LKML-Reference: <1266548212-24243-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Paul Mackerras brought up a good point that when fallbacking to
software events, I may have been lucky in my configuration.

Modified the code to explicit provide a new configuration for
software events.
Suggested-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1266357745-26671-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Re-arrange the code so that when someone disables nmi_watchdog
with:

  echo 0 > /proc/sys/kernel/nmi_watchdog

it releases the hardware reservation on the PMUs.  This allows
the oprofile module to grab those PMUs and do its thing.
Otherwise oprofile fails to load because the hardware is
reserved by the perf_events subsystem.

Tested using:

  oprofile --vm-linux --start

and watched it failed when nmi_watchdog is enabled and succeed
when:

  oprofile --deinit && echo 0 > /proc/sys/kernel/nmi_watchdog

is run.

Note:  this has the side quirk of having the nmi_watchdog latch
onto the software events instead of hardware events if oprofile
has already reserved the hardware first.  User beware! :-)
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
Cc: eranian@google.com
LKML-Reference: <1266357892-30504-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Not all arches have a PMU or have perf_event support for their
PMU.  The nmi_watchdog will fail in those cases.  Fallback to
using software events to generate nmi_watchdog traffic with
local apic interrupts.

Tested on a Pentium4 and it worked as expected, excepting for
detecting cpu lockups.

The problem with using software events as a cpu lock up detector
is the nmi_watchdog uses the logic that if local apic interrupts
stop incrementing then the cpu is probably locked up.  But with
software events we use the local apic to trigger the
nmi_watchdog callback to see if local apic interrupts are still
firing, which obviously they are otherwise we wouldn't have been
triggered.

The algorithm to detect cpu lock ups is the same as the old
nmi_watchdog. Perhaps we need to find a better way to detect
lock ups?
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
LKML-Reference: <1266013161-31197-3-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The original patch was x86_64 centric.  Changed the code to make
it less so.

ested by building and running on a powerpc.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
LKML-Reference: <1266013161-31197-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Determines if an arch has setup arch specific perf_events and
nmi_watchdog code.  This should restrict compiles to only those
arches ready.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
LKML-Reference: <1266013161-31197-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It wont even build on other platforms just yet - so restrict it
to x86 for now.

Cc: Don Zickus <dzickus@redhat.com>
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
Cc: peterz@infradead.org
LKML-Reference: <1265424425-31562-4-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

These are the bits that enable the new nmi_watchdog and safely
isolate the old nmi_watchdog.  Only one or the other can run,
not both at the same time.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
Cc: peterz@infradead.org
LKML-Reference: <1265424425-31562-4-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This is a new generic nmi_watchdog implementation using the perf
events infrastructure as suggested by Ingo.

The implementation is simple, just create an in-kernel perf
event and register an overflow handler to check for cpu lockups.

I created a generic implementation that lives in kernel/ and
the hardware specific part that for now lives in arch/x86.

This approach has a number of advantages:

 - It simplifies the x86 PMU implementation in the long run,
   in that it removes the hardcoded low-level PMU implementation
   that was the NMI watchdog before.

 - It allows new NMI watchdog features to be added in a central
   place.

 - It allows other architectures to enable the NMI watchdog,
   as long as they have perf events (that provide NMIs)
   implemented.

 - It also allows for more graceful co-existence of existing
   perf events apps and the NMI watchdog - before these changes
   the relationship was exclusive. (The NMI watchdog will 'spend'
   a perf event when enabled. In later iterations we might be
   able to piggyback from an existing NMI event without having
   to allocate a hardware event for the NMI watchdog - turning
   this into a no-hardware-cost feature.)

As for compatibility, we'll keep the old NMI watchdog code as
well until the new one can 100% replace it on all CPUs, old and
new alike.  That might take some time as the NMI watchdog has
been ported to many CPU models.

I have done light testing to make sure the framework works
correctly and it does.

 v2: Set the correct timeout values based on the old nmi
     watchdog
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
Cc: peterz@infradead.org
LKML-Reference: <1265424425-31562-3-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In order to handle a new nmi_watchdog approach, I need to move
the notify_die() routine out of nmi_watchdog_tick() and into
default_do_nmi(). This lets me easily swap out the old
nmi_watchdog with the new one with just a config change.

The change probably makes sense from a high level perspective
because the nmi_watchdog shouldn't be handling notify_die
routines anyway.  However, this move does change the semantics a
little bit.  Instead of checking on every nmi interrupt if the
cpus are stuck, only check them on the nmi_watchdog interrupts.

 v2: Move notify_die call into #idef block
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
Cc: peterz@infradead.org
LKML-Reference: <1265424425-31562-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fixes these warnings:

 arch/x86/kernel/alternative.c: In function 'alternatives_text_reserved':
 arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast
 arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast
 arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast
 arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast

Caused by:

  2cfa1978: ftrace/alternatives: Introducing *_text_reserved functions

Changes in v2:
  - Use local variables to compare, instead of type casts.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20100205171647.15750.37221.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Because we may have aliases, like __GI___strcoll_l in
/lib64/libc-2.10.2.so that appears in objdump as:

$ objdump --start-address=0x0000003715a86420 \
           --stop-address=0x0000003715a872dc -dS /lib64/libc-2.10.2.so

0000003715a86420 <__strcoll_l>:
  3715a86420:	55                   	push   %rbp
  3715a86421:	48 89 e5             	mov    %rsp,%rbp
  3715a86424:	41 57                	push   %r15
[root@doppio linux-2.6-tip]#

So look for the address exactly at the start of the line instead
so that annotation can work for in these cases.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265550376-12665-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

First, for programs and prelinked libraries, annotate code was
fooled by objdump output IPs (src->eip in the code) being
wrongly converted to absolute IPs. In such case there were no
conversion needed, but in

   src->eip = strtoull(src->line, NULL, 16);
   src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff

we were reading absolute address from objdump (e.g. 8048604) and
then almost doubling it, because eip & map->start are
approximately close for small programs.

Needless to say, that later, in record_precise_ip() there was no
matching with real runtime IPs.

And second, like with `perf annotate` the problem with
non-prelinked *.so was that we were doing rip -> objdump address
conversion wrong.

Also, because unlike `perf annotate`, `perf top` code does
annotation based on absolute IPs for performance reasons(*), new
helper for mapping objdump addresse to IP is introduced.

(*) we get samples info in absolute IPs, and since we do lots of
    hit-testing on absolute IPs at runtime in record_precise_ip(), it's
    better to convert objdump addresses to IPs once and do no conversion
    at runtime.

I also had to fix how objdump output is parsed (with hardcoded
8/16 characters format, which was inappropriate for ET_DYN dsos
with small addresses like '4ac')

Also note, that not all objdump output lines has associtated
IPs, e.g. look at source lines here:

    000004ac <my_strlen>:
    extern "C"
    int my_strlen(const char *s)
     4ac:   55                      push   %ebp
     4ad:   89 e5                   mov    %esp,%ebp
     4af:   83 ec 10                sub    $0x10,%esp
    {
        int len = 0;
     4b2:   c7 45 fc 00 00 00 00    movl   $0x0,-0x4(%ebp)
     4b9:   eb 08                   jmp    4c3 <my_strlen+0x17>

        while (*s) {
            ++len;
     4bb:   83 45 fc 01             addl   $0x1,-0x4(%ebp)
            ++s;
     4bf:   83 45 08 01             addl   $0x1,0x8(%ebp)

So we mark them with eip=0, and ignore such lines in annotate
lookup code.
Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
[ Note: one hunk of this patch was applied by Mike in 57d81889 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since mcount function can be called from everywhere,
it should be blacklisted. Moreover, the "mcount" symbol
is a special symbol name. So, it is better to put it in
the generic blacklist.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100205062433.3745.36726.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf top and perf record refuses to initialize on non-modular kernels:
refuse to initialize:

 $ perf top -v
  map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Setting _FILE_OFFSET_BITS and using O_LARGEFILE, lseek64, etc,
is redundant. Thanks H. Peter Anvin for pointing it out.

So, this patch removes O_LARGEFILE, lseek64, etc.
Suggested-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B6A8972.3070605@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We cannot assume that because hwc->idx == assign[i], we can avoid
reprogramming the counter in hw_perf_enable().

The event may have been scheduled out and another event may have been
programmed into this counter. Thus, we need a more robust way of
verifying if the counter still contains config/data related to an event.

This patch adds a generation number to each counter on each cpu. Using
this mechanism we can verify reliabilty whether the content of a counter
corresponds to an event.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4b66dc67.0b38560a.1635.ffffae18@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Avoid accidental misuse by failing to compile things
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Implement Intel Core Solo/Duo, aka.
Intel Architectural Performance Monitoring Version 1.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Pretty much all of the calls do perf_disable/perf_enable cycles, pull
that out to cut back on hardware programming.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove record freezing. Because kprobes never puts probe on
ftrace's mcount call anymore, it doesn't need ftrace to check
whether kprobes on it.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100202214925.4694.73469.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Check whether the address of new probe is already reserved by
ftrace or alternatives (on x86) when registering new probe.
If reserved, it returns an error and not register the probe.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <20100202214918.4694.94179.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introducing *_text_reserved functions for checking the text
address range is partially reserved or not. This patch provides
checking routines for x86 smp alternatives and dynamic ftrace.
Since both functions modify fixed pieces of kernel text, they
should reserve and protect those from other dynamic text
modifier, like kprobes.

This will also be extended when introducing other subsystems
which modify fixed pieces of kernel text. Dynamic text modifiers
should avoid those.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <20100202214911.4694.16587.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Disable kprobe booster when CONFIG_PREEMPT=y at this time,
because it can't ensure that all kernel threads preempted on
kprobe's boosted slot run out from the slot even using
freeze_processes().

The booster on preemptive kernel will be resumed if
synchronize_tasks() or something like that is introduced.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100202214904.4694.24330.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1265265106.6364.5.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

By relying on logic in dso__load_kernel_sym(), we can
automatically load vmlinux.

The only thing which needs to be adjusted, is how --sym-annotate
option is handled - now we can't rely on vmlinux been loaded
until full successful pass of dso__load_vmlinux(), but that's
not the case if we'll do sym_filter_entry setup in
symbol_filter().

So move this step right after event__process_sample() where we
know the whole dso__load_kernel_sym() pass is done.

By the way, though conceptually similar `perf top` still can't
annotate userspace - see next patches with fixes.
Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265223128-11786-9-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The problem was we were incorrectly calculating objdump
addresses for sym->start and sym->end, look:

For simple ET_DYN type DSO (*.so) with one function, objdump -dS
output is something like this:

    000004ac <my_strlen>:
    int my_strlen(const char *s)
     4ac:   55                      push   %ebp
     4ad:   89 e5                   mov    %esp,%ebp
     4af:   83 ec 10                sub    $0x10,%esp
    {

i.e. we have relative-to-dso-mapping IPs (=RIP) there.

For ET_EXEC type and probably for prelinked libs as well (sorry
can't test - I don't use prelink) objdump outputs absolute IPs,
e.g.

    08048604 <zz_strlen>:
    extern "C"
    int zz_strlen(const char *s)
     8048604:       55                      push   %ebp
     8048605:       89 e5                   mov    %esp,%ebp
     8048607:       83 ec 10                sub    $0x10,%esp
    {

So, if sym->start is always relative to dso mapping(*), we'll
have to unmap it for ET_EXEC like cases, and leave as is for
ET_DYN cases.

(*) and it is - we've explicitely made it relative. Look for
    adjust_symbols handling in dso__load_sym()

Previously we were always unmapping sym->start and for ET_DYN
dsos resulting addresses were wrong, and so objdump output was
empty.

The end result was that perf annotate output for symbols from
non-prelinked *.so had always 0.00% percents only, which is
wrong.

To fix it, let's introduce a helper for converting rip to
objdump address, and also let's document what map_ip() and
unmap_ip() do -- I had to study sources for several hours to
understand it.
Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265223128-11786-8-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Not to pollute too much 'perf annotate' debugging sessions.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-7-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We want to stream events as fast as possible to perf.data, and
also in the future we want to have splice working, when no
interception will be possible.

Using build_id__mark_dso_hit_ops to create the list of DSOs that
back MMAPs we also optimize disk usage in the build-id cache by
only caching DSOs that had hits.
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-6-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Because 'perf record' will have to find the build-ids in after
we stop recording, so as to reduce even more the impact in the
workload while we do the measurement.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-5-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

With the recent modifications done to untie the session and
symbol layers, 'perf probe' now can use just the symbols layer.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We can check using strcmp, most DSOs don't start with '[' so the
test is cheap enough and we had to test it there anyway since
when reading perf.data files we weren't calling the routine that
created this global variable and thus weren't setting it as
"loaded", which was causing a bogus:

  Failed to open [vdso], continuing without symbols

Message as the first line of 'perf report'.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While debugging a problem reported by Pekka Enberg by printing
the IP and all the maps for a thread when we don't find a map
for an IP I noticed that dso__load_sym needs to fixup these
extra maps it creates to hold symbols in different ELF sections
than the main kernel one.

Now we're back showing things like:

[root@doppio linux-2.6-tip]# perf report | grep vsyscall
     0.02%             mutt  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%            named  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%   NetworkManager  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%         gconfd-2  [kernel.kallsyms].vsyscall_0   [.] vgettimeofday
     0.01%  hald-addon-rfki  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.00%      dbus-daemon  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
[root@doppio linux-2.6-tip]#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I noticed while writing the first test in 'perf regtest' that to
just test the symbol handling routines one needs to create a
perf session, that is a layer centered on a perf.data file,
events, etc, so I untied these layers.

This reduces the complexity for the users as the number of
parameters to most of the symbols and session APIs now was
reduced while not adding more state to all the map instances by
only having data that is needed to split the kernel (kallsyms
and ELF symtab sections) maps and do vmlinux relocation on the
main kernel map.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Open perf data file with O_LARGEFILE flag since its size is
easily larger that 2G.

For example:

 # rm -rf perf.data
 # ./perf kmem record sleep 300

 [ perf record: Woken up 0 times to write data ]
 [ perf record: Captured and wrote 3142.147 MB perf.data
 (~137282513 samples) ]

 # ll -h perf.data
 -rw------- 1 root root 3.1G .....
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B68F32A.9040203@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix up a few small stylistic details:

 - use consistent vertical spacing/alignment
 - remove line80 artifacts
 - group some global variables better
 - remove dead code

Plus rename 'prof' to 'report' to make it more in line with other
tools, and remove the line/file keying as we really want to use
IPs like the other tools do.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Adding new subcommand "perf lock" to perf.

I have a lot of remaining ToDos, but for now perf lock can
already provide minimal functionality for analyzing lock
statistics.
Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add wait time and lock identification details.
Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-11-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ removed the file/line bits as we can do that better via IPs ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

linux/hash.h, hash header of kernel, is also useful for perf.

util/include/linuxhash.h includes linux/hash.h, so we can use
hash facilities (e.g. hash_long()) in perf now.
Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>