- 30 5月, 2018 4 次提交
-
-
由 Ilia Lin 提交于
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, the CPU frequency subset and voltage value of each OPP varies based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables defines the voltage and frequency value based on the msm-id in SMEM and speedbin blown in the efuse combination. The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC to provide the OPP framework with required information. This is used to determine the voltage and frequency value for each OPP of operating-points-v2 table when it is parsed by the OPP framework. Signed-off-by: NIlia Lin <ilialin@codeaurora.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Reviewed-by: NAmit Kucheria <amit.kucheria@linaro.org> Tested-by: NAmit Kucheria <amit.kucheria@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Use the static SRCU initializer for `cpufreq_transition_notifier_list'. This avoids the init_cpufreq_transition_notifier_list() initcall. Its only purpose is to initialize the SRCU notifier once during boot and set another variable which is used as an indicator whether the init was perfromed before cpufreq_register_notifier() was used. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
There are macros for static initializer for the three out of four possible notifier types, that are: ATOMIC_NOTIFIER_HEAD() BLOCKING_NOTIFIER_HEAD() RAW_NOTIFIER_HEAD() This patch provides a static initilizer for the forth type to make it complete. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Tao Wang 提交于
If the policy limits are updated via cpufreq_update_policy() and subsequently via sysfs, the limits stored in user_policy may be set incorrectly. For example, if both min and max are set via sysfs to the maximum available frequency, user_policy.min and user_policy.max will also be the maximum. If a policy notifier triggered by cpufreq_update_policy() lowers both the min and the max at this point, that change is not reflected by the user_policy limits, so if the max is updated again via sysfs to the same lower value, then user_policy.max will be lower than user_policy.min which shouldn't happen. In particular, if one of the policy CPUs is then taken offline and back online, cpufreq_set_policy() will fail for it due to a failing limits check. To prevent that from happening, initialize the min and max fields of the new_policy object to the ones stored in user_policy that were previously set via sysfs. Signed-off-by: NKevin Wangtao <kevin.wangtao@hisilicon.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 21 5月, 2018 11 次提交
-
-
由 Dmitry Osipenko 提交于
Currently tegra20-cpufreq kernel module isn't getting autoloaded because there is no device associated with the module, this is one of two patches that resolves the module autoloading. This patch adds a module alias that will associate the tegra20-cpufreq kernel module with the platform device, other patch will instantiate the actual platform device. And now it makes sense to wrap cpufreq driver into a platform driver for consistency. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Nothing prevents Tegra20 CPUFreq module to be unloaded, hence allow it to be built as a non-builtin kernel module. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Don't even try to request the clocks during of module initialization on non-Tegra20 machines (this is the case for a multi-platform kernel) for consistency. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Remove unneeded variable initialization solely for consistency. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Remove unnecessary parentheses as suggested by the checkpatch script. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NThierry Reding <treding@nvidia.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Remove checking of the CPU number for consistency as it won't ever fail unless there is a severe bug in the cpufreq core. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Properly put requested clocks in the module init/exit code. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
The EMC driver has been gone 4 years ago, since the commit a7cbe92c ("ARM: tegra: remove tegra EMC scaling driver"). Remove the EMC clock usage as it does nothing. We may consider re-implementing the EMC scaling later, probably using PM Memory Bandwidth QoS API. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Remove unused/unneeded headers and sort them in the alphabet order. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NThierry Reding <treding@nvidia.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Remove unneeded blank line and replace whitespaces with a tab in the code for consistency. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dmitry Osipenko 提交于
Change module description to be in line with the other Tegra drivers, just for consistency. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 19 5月, 2018 1 次提交
-
-
由 Rafael J. Wysocki 提交于
-
- 15 5月, 2018 4 次提交
-
-
由 Simon Horman 提交于
This reverts commit 034def59. This is no longer needed since the following commit and to the best of my knowledge is not relied on by any upstream DTS: edeec420 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Simon Horman 提交于
This reverts commit bea2ebca. This is no longer needed since the following commit and to the best of my knowledge is not relied on by any upstream DTS: edeec420 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Doug Smythies 提交于
Allow use of the trace_pstate_sample trace function when the intel_pstate driver is in passive mode. Since the core_busy and scaled_busy fields are not used, and it might be desirable to know which path through the driver was used, either intel_cpufreq_target or intel_cpufreq_fast_switch, re-task the core_busy field as a flag indicator. The user can then use the intel_pstate_tracer.py utility to summarize and plot the trace. Note: The core_busy feild still goes by that name in include/trace/events/power.h and within the intel_pstate_tracer.py script and csv file headers, but it is graphed as "performance", and called core_avg_perf now in the intel_pstate driver. Sometimes, in passive mode, the driver is not called for many tens or even hundreds of seconds. The user needs to understand, and not be confused by, this limitation. Signed-off-by: NDoug Smythies <dsmythies@telus.net> Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Miquel Raynal 提交于
Armada-37xx driver registers a cpufreq-dt driver. Not having CONFIG_CPUFREQ_DT selected leads to a silent abort during the probe. Prevent that situation by having the former depending on the latter. Fixes: 92ce45fb (cpufreq: Add DVFS support for Armada 37xx) Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 14 5月, 2018 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/pti updates from Thomas Gleixner: "A mixed bag of fixes and updates for the ghosts which are hunting us. The scheduler fixes have been pulled into that branch to avoid conflicts. - A set of fixes to address a khread_parkme() race which caused lost wakeups and loss of state. - A deadlock fix for stop_machine() solved by moving the wakeups outside of the stopper_lock held region. - A set of Spectre V1 array access restrictions. The possible problematic spots were discuvered by Dan Carpenters new checks in smatch. - Removal of an unused file which was forgotten when the rest of that functionality was removed" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Remove unused file perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map() perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_* perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[] sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[] sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[] sched/core: Introduce set_special_state() kthread, sched/wait: Fix kthread_parkme() completion issue kthread, sched/wait: Fix kthread_parkme() wait-loop sched/fair: Fix the update of blocked load when newly idle stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fix from Thomas Gleixner: "Revert the new NUMA aware placement approach which turned out to create more problems than it solved" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf tooling fixes from Thomas Gleixner: "Another small set of perf tooling fixes and updates: - Revert "perf pmu: Fix pmu events parsing rule", as it broke Intel PT event description parsing (Arnaldo Carvalho de Melo) - Sync x86's cpufeatures.h and kvm UAPI headers with the kernel sources, suppressing the ABI drift warnings (Arnaldo Carvalho de Melo) - Remove duplicated entry for westmereep-dp in Intel's mapfile.csv (William Cohen) - Fix typo in 'perf bench numa' options description (Yisheng Xie)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "perf pmu: Fix pmu events parsing rule" tools headers kvm: Sync ARM UAPI headers with the kernel sources tools headers kvm: Sync uapi/linux/kvm.h with the kernel sources tools headers: Sync x86 cpufeatures.h with the kernel sources perf vendor events intel: Remove duplicated entry for westmereep-dp in mapfile.csv perf bench numa: Fix typo in options
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping fix from Christoph Hellwig: "Just one little fix from Jean to avoid a harmless but very annoying warning, especially for the drm code" * tag 'dma-mapping-4.17-5' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: silent unwanted warning "buffer is full"
-
- 13 5月, 2018 4 次提交
-
-
由 Viresh Kumar 提交于
cpufreq_notify_transition() calls __cpufreq_notify_transition() for each CPU of a policy. There is a lot of code in __cpufreq_notify_transition() though which isn't required to be executed for each CPU, like checking about disabled cpufreq or irqs, adjusting jiffies, updating cpufreq stats and some debug print messages. This commit merges __cpufreq_notify_transition() into cpufreq_notify_transition() and modifies cpufreq_notify_transition() to execute minimum amount of code for each CPU. Also fix the kerneldoc for cpufreq_notify_transition() while at it. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "Some small SMB3 fixes for 4.17-rc5, some for stable" * tag '4.17-rc4-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: directory sync should not return an error cifs: smb2ops: Fix listxattr() when there are no EAs cifs: smbd: Enable signing with smbdirect cifs: Allocate validate negotiation request through kmalloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal fixes from Zhang Rui: - fix NULL pointer dereference on module load/probe for int3403_thermal driver - fix an emergency shutdown issue on exynos thermal driver * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: exynos: Propagate error value from tmu_read() thermal: exynos: Reading temperature makes sense only when TMU is turned on thermal: int3403_thermal: Fix NULL pointer deref on module load / probe
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Just a few NVMe fixes this round - one fixing a use-after-free, one fixes the return value after controller reset, and the last one fixes an issue where some drives will spuriously EIO. We should get these into 4.17" * tag 'for-linus-20180511' of git://git.kernel.dk/linux-block: nvme: add quirk to force medium priority for SQ creation nvme: Fix sync controller reset return nvme: fix use-after-free in nvme_free_ns_head
-
- 12 5月, 2018 11 次提交
-
-
由 Jean Delvare 提交于
If DMA_ATTR_NO_WARN is passed to swiotlb_alloc_buffer(), it should be passed further down to swiotlb_tbl_map_single(). Otherwise we escape half of the warnings but still log the other half. This is one of the multiple causes of spurious warnings reported at: https://bugs.freedesktop.org/show_bug.cgi?id=104082Signed-off-by: NJean Delvare <jdelvare@suse.de> Fixes: 0176adb0 ("swiotlb: refactor coherent buffer allocation") Cc: Christoph Hellwig <hch@lst.de> Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Takashi Iwai <tiwai@suse.de> Cc: stable@vger.kernel.org # v4.16
-
由 Mel Gorman 提交于
This reverts commit 7347fc87. Srikar Dronamra pointed out that while the commit in question did show a performance improvement on ppc64, it did so at the cost of disabling active CPU migration by automatic NUMA balancing which was not the intent. The issue was that a serious flaw in the logic failed to ever active balance if SD_WAKE_AFFINE was disabled on scheduler domains. Even when it's enabled, the logic is still bizarre and against the original intent. Investigation showed that fixing the patch in either the way he suggested, using the correct comparison for jiffies values or introducing a new numa_migrate_deferred variable in task_struct all perform similarly to a revert with a mix of gains and losses depending on the workload, machine and socket count. The original intent of the commit was to handle a problem whereby wake_affine, idle balancing and automatic NUMA balancing disagree on the appropriate placement for a task. This was particularly true for cases where a single task was a massive waker of tasks but where wake_wide logic did not apply. This was particularly noticeable when a futex (a barrier) woke all worker threads and tried pulling the wakees to the waker nodes. In that specific case, it could be handled by tuning MPI or openMP appropriately, but the behavior is not illogical and was worth attempting to fix. However, the approach was wrong. Given that we're at rc4 and a fix is not obvious, it's better to play safe, revert this commit and retry later. Signed-off-by: NMel Gorman <mgorman@techsingularity.net> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: efault@gmx.de Cc: ggherdovich@suse.cz Cc: hpa@zytor.com Cc: matt@codeblueprint.co.uk Cc: mpe@ellerman.id.au Link: http://lkml.kernel.org/r/20180509163115.6fnnyeg4vdm2ct4v@techsingularity.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rbtree: include rcu.h scripts/faddr2line: fix error when addr2line output contains discriminator ocfs2: take inode cluster lock before moving reflinked inode from orphan dir mm, oom: fix concurrent munlock and oom reaper unmap, v3 mm: migrate: fix double call of radix_tree_replace_slot() proc/kcore: don't bounds check against address 0 mm: don't show nr_indirectly_reclaimable in /proc/vmstat mm: sections are not offlined during memory hotremove z3fold: fix reclaim lock-ups init: fix false positives in W+X checking lib/find_bit_benchmark.c: avoid soft lockup in test_find_first_bit() KASAN: prohibit KASAN+STRUCTLEAK combination MAINTAINERS: update Shuah's email address
-
Since commit c1adf200 ("Introduce rb_replace_node_rcu()") rbtree_augmented.h uses RCU related data structures but does not include the header file. It works as long as it gets somehow included before that and fails otherwise. Link: http://lkml.kernel.org/r/20180504103159.19938-1-bigeasy@linutronix.deSigned-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Changbin Du 提交于
When addr2line output contains discriminator, the current awk script cannot parse it. This patch fixes it by extracting key words using regex which is more reliable. $ scripts/faddr2line vmlinux tlb_flush_mmu_free+0x26 tlb_flush_mmu_free+0x26/0x50: tlb_flush_mmu_free at mm/memory.c:258 (discriminator 3) scripts/faddr2line: eval: line 173: unexpected EOF while looking for matching `)' Link: http://lkml.kernel.org/r/1525323379-25193-1-git-send-email-changbin.du@intel.com Fixes: 6870c016 ("scripts/faddr2line: show the code context") Signed-off-by: NChangbin Du <changbin.du@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: NeilBrown <neilb@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ashish Samant 提交于
While reflinking an inode, we create a new inode in orphan directory, then take EX lock on it, reflink the original inode to orphan inode and release EX lock. Once the lock is released another node could request it in EX mode from ocfs2_recover_orphans() which causes downconvert of the lock, on this node, to NL mode. Later we attempt to initialize security acl for the orphan inode and move it to the reflink destination. However, while doing this we dont take EX lock on the inode. This could potentially cause problems because we could be starting transaction, accessing journal and modifying metadata of the inode while holding NL lock and with another node holding EX lock on the inode. Fix this by taking orphan inode cluster lock in EX mode before initializing security and moving orphan inode to reflink destination. Use the __tracker variant while taking inode lock to avoid recursive locking in the ocfs2_init_security_and_acl() call chain. Link: http://lkml.kernel.org/r/1523475107-7639-1-git-send-email-ashish.samant@oracle.comSigned-off-by: NAshish Samant <ashish.samant@oracle.com> Reviewed-by: NJoseph Qi <jiangqi903@gmail.com> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Acked-by: NJun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
Since exit_mmap() is done without the protection of mm->mmap_sem, it is possible for the oom reaper to concurrently operate on an mm until MMF_OOM_SKIP is set. This allows munlock_vma_pages_all() to concurrently run while the oom reaper is operating on a vma. Since munlock_vma_pages_range() depends on clearing VM_LOCKED from vm_flags before actually doing the munlock to determine if any other vmas are locking the same memory, the check for VM_LOCKED in the oom reaper is racy. This is especially noticeable on architectures such as powerpc where clearing a huge pmd requires serialize_against_pte_lookup(). If the pmd is zapped by the oom reaper during follow_page_mask() after the check for pmd_none() is bypassed, this ends up deferencing a NULL ptl or a kernel oops. Fix this by manually freeing all possible memory from the mm before doing the munlock and then setting MMF_OOM_SKIP. The oom reaper can not run on the mm anymore so the munlock is safe to do in exit_mmap(). It also matches the logic that the oom reaper currently uses for determining when to set MMF_OOM_SKIP itself, so there's no new risk of excessive oom killing. This issue fixes CVE-2018-1000200. Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1804241526320.238665@chino.kir.corp.google.com Fixes: 21292580 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") Signed-off-by: NDavid Rientjes <rientjes@google.com> Suggested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
radix_tree_replace_slot() is called twice for head page, it's obviously a bug. Let's fix it. Link: http://lkml.kernel.org/r/20180423072101.GA12157@hori1.linux.bs1.fc.nec.co.jp Fixes: e71769ae ("mm: enable thp migration for shmem thp") Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: NMatthew Wilcox <willy@infradead.org> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <zi.yan@sent.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Laura Abbott 提交于
The existing kcore code checks for bad addresses against __va(0) with the assumption that this is the lowest address on the system. This may not hold true on some systems (e.g. arm64) and produce overflows and crashes. Switch to using other functions to validate the address range. It's currently only seen on arm64 and it's not clear if anyone wants to use that particular combination on a stable release. So this is not urgent for stable. Link: http://lkml.kernel.org/r/20180501201143.15121-1-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com> Tested-by: NDave Anderson <anderson@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alexey Dobriyan <adobriyan@gmail.com>a Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roman Gushchin 提交于
Don't show nr_indirectly_reclaimable in /proc/vmstat, because there is no need to export this vm counter to userspace, and some changes are expected in reclaimable object accounting, which can alter this counter. Link: http://lkml.kernel.org/r/20180425191422.9159-1-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Tatashin 提交于
Memory hotplug and hotremove operate with per-block granularity. If the machine has a large amount of memory (more than 64G), the size of a memory block can span multiple sections. By mistake, during hotremove we set only the first section to offline state. The bug was discovered because kernel selftest started to fail: https://lkml.kernel.org/r/20180423011247.GK5563@yexl-desktop After commit, "mm/memory_hotplug: optimize probe routine". But, the bug is older than this commit. In this optimization we also added a check for sections to be in a proper state during hotplug operation. Link: http://lkml.kernel.org/r/20180427145257.15222-1-pasha.tatashin@oracle.com Fixes: 2d070eab ("mm: consider zone which is not fully populated to have holes") Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-