MIGRATE_RECLAIMABLE allocations tend to be very bursty in nature like when
updatedb starts.  It is likely this will occur in situations where MAX_ORDER
blocks of pages are not free.  This means that updatedb can scatter
MIGRATE_RECLAIMABLE pages throughout the address space.  This patch is more
agressive about stealing blocks of pages for MIGRATE_RECLAIMABLE.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch chooses blocks with lower PFNs when placing kernel allocations.
This is particularly important during fallback in low memory situations to
stop unmovable pages being placed throughout the entire address space.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Grouping pages by mobility can only successfully operate when there are more
MAX_ORDER_NR_PAGES areas than mobility types.  When there are insufficient
areas, fallbacks cannot be avoided.  This has noticeable performance impacts
on machines with small amounts of memory in comparison to MAX_ORDER_NR_PAGES.
For example, on IA64 with a configuration including huge pages spans 1GiB with
MAX_ORDER_NR_PAGES so would need at least 4GiB of RAM before grouping pages by
mobility would be useful.  In comparison, an x86 would need 16MB.

This patch checks the size of vm_total_pages in build_all_zonelists(). If
there are not enough areas,  mobility is effectivly disabled by considering
all allocations as the same type (UNMOVABLE).  This is achived via a
__read_mostly flag.

With this patch, performance is comparable to disabling grouping pages
by mobility at compile-time on a test machine with insufficient memory.
With this patch, it is reasonable to get rid of grouping pages by mobility
a compile-time option.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In rare cases, the kernel needs to allocate a high-order block of pages
without sleeping.  For example, this is the case with e1000 cards configured
to use jumbo frames.  Migrating or reclaiming pages in this situation is not
an option.

This patch groups these allocations together as much as possible by adding a
new MIGRATE_TYPE.  The MIGRATE_HIGHATOMIC type are exactly what they sound
like.  Care is taken that pages of other migrate types do not use the same
blocks as high-order atomic allocations.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch marks a number of allocations that are either short-lived such as
network buffers or are reclaimable such as inode allocations.  When something
like updatedb is called, long-lived and unmovable kernel allocations tend to
be spread throughout the address space which increases fragmentation.

This patch groups these allocations together as much as possible by adding a
new MIGRATE_TYPE.  The MIGRATE_RECLAIMABLE type is for allocations that can be
reclaimed on demand, but not moved.  i.e.  they can be migrated by deleting
them and re-reading the information from elsewhere.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a fallback occurs, there will be free pages for one allocation type
stored on the list for another.  When a large steal occurs, this patch will
move all the free pages within one list to the other.

[y-goto@jp.fujitsu.com: fix BUG_ON check at move_freepages()]
[apw@shadowen.org: Move to using pfn_valid_within()]
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndy Whitcroft <andyw@uk.ibm.com>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Per-cpu pages can accidentally cause fragmentation because they are free, but
pinned pages in an otherwise contiguous block.  When this patch is applied,
the per-cpu caches are drained after the direct-reclaim is entered if the
requested order is greater than 0.  It simply reuses the code used by suspend
and hotplug.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The grouping mechanism has some memory overhead and a more complex allocation
path.  This patch allows the strategy to be disabled for small memory systems
or if it is known the workload is suffering because of the strategy.  It also
acts to show where the page groupings strategy interacts with the standard
buddy allocator.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The freelists for each migrate type can slowly become polluted due to the
per-cpu list.  Consider what happens when the following happens

1. A 2^(MAX_ORDER-1) list is reserved for __GFP_MOVABLE pages
2. An order-0 page is allocated from the newly reserved block
3. The page is freed and placed on the per-cpu list
4. alloc_page() is called with GFP_KERNEL as the gfp_mask
5. The per-cpu list is used to satisfy the allocation

This results in a kernel page is in the middle of a migratable region. This
patch prevents this leak occuring by storing the MIGRATE_ type of the page in
page->private. On allocate, a page will only be returned of the desired type,
else more pages will be allocated. This may temporarily allow a per-cpu list
to go over the pcp->high limit but it'll be corrected on the next free. Care
is taken to preserve the hotness of pages recently freed.

The additional code is not measurably slower for the workloads we've tested.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the core of the fragmentation reduction strategy.  It works by
grouping pages together based on their ability to migrate or be reclaimed.
Basically, it works by breaking the list in zone->free_area list into
MIGRATE_TYPES number of lists.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Here is the latest revision of the anti-fragmentation patches.  Of particular
note in this version is special treatment of high-order atomic allocations.
Care is taken to group them together and avoid grouping pages of other types
near them.  Artifical tests imply that it works.  I'm trying to get the
hardware together that would allow setting up of a "real" test.  If anyone
already has a setup and test that can trigger the atomic-allocation problem,
I'd appreciate a test of these patches and a report.  The second major change
is that these patches will apply cleanly with patches that implement
anti-fragmentation through zones.

kernbench shows effectively no performance difference varying between -0.2%
and +2% on a variety of test machines.  Success rates for huge page allocation
are dramatically increased.  For example, on a ppc64 machine, the vanilla
kernel was only able to allocate 1% of memory as a hugepage and this was due
to a single hugepage reserved as min_free_kbytes.  With these patches applied,
17% was allocatable as superpages.  With reclaim-related fixes from Andy
Whitcroft, it was 40% and further reclaim-related improvements should increase
this further.

Changelog Since V28
o Group high-order atomic allocations together
o It is no longer required to set min_free_kbytes to 10% of memory. A value
  of 16384 in most cases will be sufficient
o Now applied with zone-based anti-fragmentation
o Fix incorrect VM_BUG_ON within buffered_rmqueue()
o Reorder the stack so later patches do not back out work from earlier patches
o Fix bug were journal pages were being treated as movable
o Bias placement of non-movable pages to lower PFNs
o More agressive clustering of reclaimable pages in reactions to workloads
  like updatedb that flood the size of inode caches

Changelog Since V27

o Renamed anti-fragmentation to Page Clustering. Anti-fragmentation was giving
  the mistaken impression that it was the 100% solution for high order
  allocations. Instead, it greatly increases the chances high-order
  allocations will succeed and lays the foundation for defragmentation and
  memory hot-remove to work properly
o Redefine page groupings based on ability to migrate or reclaim instead of
  basing on reclaimability alone
o Get rid of spurious inits
o Per-cpu lists are no longer split up per-type. Instead the per-cpu list is
  searched for a page of the appropriate type
o Added more explanation commentary
o Fix up bug in pageblock code where bitmap was used before being initalised

Changelog Since V26
o Fix double init of lists in setup_pageset

Changelog Since V25
o Fix loop order of for_each_rclmtype_order so that order of loop matches args
o gfpflags_to_rclmtype uses gfp_t instead of unsigned long
o Rename get_pageblock_type() to get_page_rclmtype()
o Fix alignment problem in move_freepages()
o Add mechanism for assigning flags to blocks of pages instead of page->flags
o On fallback, do not examine the preferred list of free pages a second time

The purpose of these patches is to reduce external fragmentation by grouping
pages of related types together.  When pages are migrated (or reclaimed under
memory pressure), large contiguous pages will be freed.

This patch works by categorising allocations by their ability to migrate;

Movable - The pages may be moved with the page migration mechanism. These are
	generally userspace pages.

Reclaimable - These are allocations for some kernel caches that are
	reclaimable or allocations that are known to be very short-lived.

Unmovable - These are pages that are allocated by the kernel that
	are not trivially reclaimed. For example, the memory allocated for a
	loaded module would be in this category. By default, allocations are
	considered to be of this type

HighAtomic - These are high-order allocations belonging to callers that
	cannot sleep or perform any IO. In practice, this is restricted to
	jumbo frame allocation for network receive. It is assumed that the
	allocations are short-lived

Instead of having one MAX_ORDER-sized array of free lists in struct free_area,
there is one for each type of reclaimability.  Once a 2^MAX_ORDER block of
pages is split for a type of allocation, it is added to the free-lists for
that type, in effect reserving it.  Hence, over time, pages of the different
types can be clustered together.

When the preferred freelists are expired, the largest possible block is taken
from an alternative list.  Buddies that are split from that large block are
placed on the preferred allocation-type freelists to mitigate fragmentation.

This implementation gives best-effort for low fragmentation in all zones.
Ideally, min_free_kbytes needs to be set to a value equal to 4 * (1 <<
(MAX_ORDER-1)) pages in most cases.  This would be 16384 on x86 and x86_64 for
example.

Our tests show that about 60-70% of physical memory can be allocated on a
desktop after a few days uptime.  In benchmarks and stress tests, we are
finding that 80% of memory is available as contiguous blocks at the end of the
test.  To compare, a standard kernel was getting < 1% of memory as large pages
on a desktop and about 8-12% of memory as large pages at the end of stress
tests.

Following this email are 12 patches that implement thie page grouping feature.
 The first patch introduces a mechanism for storing flags related to a whole
block of pages.  Then allocations are split between movable and all other
allocations.  Following that are patches to deal with per-cpu pages and make
the mechanism configurable.  The next patch moves free pages between lists
when partially allocated blocks are used for pages of another migrate type.
The second last patch groups reclaimable kernel allocations such as inode
caches together.  The final patch related to groupings keeps high-order atomic
allocations.

The last two patches are more concerned with control of fragmentation.  The
second last patch biases placement of non-movable allocations towards the
start of memory.  This is with a view of supporting memory hot-remove of DIMMs
with higher PFNs in the future.  The biasing could be enforced a lot heavier
but it would cost.  The last patch agressively clusters reclaimable pages like
inode caches together.

The fragmentation reduction strategy needs to track if pages within a block
can be moved or reclaimed so that pages are freed to the appropriate list.
This patch adds a bitmap for flags affecting a whole a MAX_ORDER block of
pages.

In non-SPARSEMEM configurations, the bitmap is stored in the struct zone and
allocated during initialisation.  SPARSEMEM statically allocates the bitmap in
a struct mem_section so that bitmaps do not have to be resized during memory
hotadd.  This wastes a small amount of memory per unused section (usually
sizeof(unsigned long)) but the complexity of dynamically allocating the memory
is quite high.

Additional credit to Andy Whitcroft who reviewed up an earlier implementation
of the mechanism an suggested how to make it a *lot* cleaner.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after*
set_pte().  This is too late.  This patch removes lazy_mmu_prot_update and
add modfied set_pte() for flushing if necessary.

This patch flush icache of a page when
	new pte has exec bit.
	&& new pte has present bit
	&& new pte is user's page.
	&& (old *ptep is not present
            || new pte's pfn is not same to old *ptep's ptn)
	&& new pte's page has no Pg_arch_1 bit.
	   Pg_arch_1 is set when a page is cache consistent.

I think this condition checks are much easier to understand than considering
"Where sync_icache_dcache() should be inserted ?".

pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as
clean-up. So, I added it again.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In migration, a new page should be cache flushed before set_pte() in some
archs which have virtually-tagged cache.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Swappiness isn't a safe sysctl.  Setting it to 0 for example can hang a
system.  That's a corner case but even setting it to 10 or lower can waste
enormous amounts of cpu without making much progress.  We've customers who
wants to use swappiness but they can't because of the current
implementation (if you change it so the system stops swapping it really
stops swapping and nothing works sane anymore if you really had to swap
something to make progress).

This patch from Kurt Garloff makes swappiness safer to use (no more huge
cpu usage or hangs with low swappiness values).

I think the prev_priority can also be nuked since it wastes 4 bytes per
zone (that would be an incremental patch but I wait the nr_scan_[in]active
to be nuked first for similar reasons).  Clearly somebody at some point
noticed how broken that thing was and they had to add min(priority,
prev_priority) to give it some reliability, but they didn't go the last
mile to nuke prev_priority too.  Calculating distress only in function of
not-racy priority is correct and sure more than enough without having to
add randomness into the equation.

Patch is tested on older kernels but it compiles and it's quite simple
so...

Overall I'm not very satisified by the swappiness tweak, since it doesn't
rally do anything with the dirty pagecache that may be inactive.  We need
another kind of tweak that controls the inactive scan and tunes the
can_writepage feature (not yet in mainline despite having submitted it a
few times), not only the active one.  That new tweak will tell the kernel
how hard to scan the inactive list for pure clean pagecache (something the
mainline kernel isn't capable of yet).  We already have that feature
working in all our enterprise kernels with the default reasonable tune, or
they can't even run a readonly backup with tar without triggering huge
write I/O.  I think it should be available also in mainline later.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NKurt Garloff <garloff@suse.de>
Signed-off-by: NAndrea Arcangeli <andrea@suse.de>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function of GFP_LEVEL_MASK seems to be unclear.  In order to clear up
the mystery we get rid of it and replace GFP_LEVEL_MASK with 3 sets of GFP
flags:

GFP_RECLAIM_MASK	Flags used to control page allocator reclaim behavior.

GFP_CONSTRAINT_MASK	Flags used to limit where allocations can occur.

GFP_SLAB_BUG_MASK	Flags that the slab allocator BUG()s on.

These replace the uses of GFP_LEVEL mask in the slab allocators and in
vmalloc.c.

The use of the flags not included in these sets may occur as a result of a
slab allocation standing in for a page allocation when constructing scatter
gather lists.  Extraneous flags are cleared and not passed through to the
page allocator.  __GFP_MOVABLE/RECLAIMABLE, __GFP_COLD and __GFP_COMP will
now be ignored if passed to a slab allocator.

Change the allocation of allocator meta data in SLAB and vmalloc to not
pass through flags listed in GFP_CONSTRAINT_MASK.  SLAB already removes the
__GFP_THISNODE flag for such allocations.  Generalize that to also cover
vmalloc.  The use of GFP_CONSTRAINT_MASK also includes __GFP_HARDWALL.

The impact of allocator metadata placement on access latency to the
cachelines of the object itself is minimal since metadata is only
referenced on alloc and free.  The attempt is still made to place the meta
data optimally but we consistently allow fallback both in SLAB and vmalloc
(SLUB does not need to allocate metadata like that).

Allocator metadata may serve multiple in kernel users and thus should not
be subject to the limitations arising from a single allocation context.

[akpm@linux-foundation.org: fix fallback_alloc()]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a cpu is onlined on memory-less-node box, kernel panics due to touch
NULL pointer of pgdat->kswapd.  Current kswapd runs only nodes which have
memory.  So, calling of set_cpus_allowed() is not necessary for memory-less
node.

This is fix for it.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Here's a cut at fixing up uses of the online node map in generic code.

mm/shmem.c:shmem_parse_mpol()

	Ensure nodelist is subset of nodes with memory.
	Use node_states[N_HIGH_MEMORY] as default for missing
	nodelist for interleave policy.

mm/shmem.c:shmem_fill_super()

	initialize policy_nodes to node_states[N_HIGH_MEMORY]

mm/page-writeback.c:highmem_dirtyable_memory()

	sum over nodes with memory

mm/page_alloc.c:zlc_setup()

	allowednodes - use nodes with memory.

mm/page_alloc.c:default_zonelist_order()

	average over nodes with memory.

mm/page_alloc.c:find_next_best_node()

	skip nodes w/o memory.
	N_HIGH_MEMORY state mask may not be initialized at this time,
	unless we want to depend on early_calculate_totalpages() [see
	below].  Will ZONE_MOVABLE ever be configurable?

mm/page_alloc.c:find_zone_movable_pfns_for_nodes()

	spread kernelcore over nodes with memory.

	This required calling early_calculate_totalpages()
	unconditionally, and populating N_HIGH_MEMORY node
	state therein from nodes in the early_node_map[].
	If we can depend on this, we can eliminate the
	population of N_HIGH_MEMORY mask from __build_all_zonelists()
	and use the N_HIGH_MEMORY mask in find_next_best_node().

mm/mempolicy.c:mpol_check_policy()

	Ensure nodes specified for policy are subset of
	nodes with memory.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cpusets try to ensure that any node added to a cpuset's mems_allowed is
on-line and contains memory.  The assumption was that online nodes contained
memory.  Thus, it is possible to add memoryless nodes to a cpuset and then add
tasks to this cpuset.  This results in continuous series of oom-kill and
apparent system hang.

Change cpusets to use node_states[N_HIGH_MEMORY] [a.k.a.  node_memory_map] in
place of node_online_map when vetting memories.  Return error if admin
attempts to write a non-empty mems_allowed node mask containing only
memoryless-nodes.
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: NBob Picco <bob.picco@hp.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

GFP_THISNODE checks that the zone selected is within the pgdat (node) of the
first zone of a nodelist.  That only works if the node has memory.  A
memoryless node will have its first node on another pgdat (node).

GFP_THISNODE currently will return simply memory on the first pgdat.  Thus it
is returning memory on other nodes.  GFP_THISNODE should fail if there is no
local memory on a node.

Add a new set of zonelists for each node that only contain the nodes that
belong to the zones itself so that no fallback is possible.

Then modify gfp_type to pickup the right zone based on the presence of
__GFP_THISNODE.

Drop the existing GFP_THISNODE checks from the page_allocators hot path.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_pfn_range_for_nid() is called multiple times for each node at boot time.
Each time, it will warn about nodes with no memory, resulting in boot messages
like:

        Node 0 active with no memory
        Node 0 active with no memory
        Node 0 active with no memory
        Node 0 active with no memory
        Node 0 active with no memory
        Node 0 active with no memory
        On node 0 totalpages: 0
        Node 0 active with no memory
        Node 0 active with no memory
          DMA zone: 0 pages used for memmap
        Node 0 active with no memory
        Node 0 active with no memory
          Normal zone: 0 pages used for memmap
        Node 0 active with no memory
        Node 0 active with no memory
          Movable zone: 0 pages used for memmap

and so on for each memoryless node.

We already have the "On node N totalpages: ..." and other related messages, so
drop the "Node N active with no memory" warnings.
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Bob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need the check for a node with cpu in zone reclaim.  Zone reclaim will not
allow remote zone reclaim if a node has a cpu.

[Lee.Schermerhorn@hp.com: Move setup of N_CPU node state mask]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Online nodes now may have no memory.  The checks and initialization must
therefore be changed to no longer use the online functions.

This will correctly initialize the interleave on bootup to only target nodes
with memory and will make sys_move_pages return an error when a page is to be
moved to a memoryless node.  Similarly we will get an error if MPOL_BIND and
MPOL_INTERLEAVE is used on a memoryless node.

These are somewhat new semantics.  So far one could specify memoryless nodes
and we would maybe do the right thing and just ignore the node (or we'd do
something strange like with MPOL_INTERLEAVE).  If we want to allow the
specification of memoryless nodes via memory policies then we need to keep
checking for online nodes.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Processors on memoryless nodes must be able to fall back to remote nodes in
order to get a profiling buffer.  This may lead to excessive NUMA traffic but
I think we should allow this rather than failing.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The checks for node_online in the uncached allocator are made to make sure
that memory is available on these nodes.  Thus switch all the checks to use
N_HIGH_MEMORY and to N_ONLINE.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simply switch all for_each_online_node to for_each_node_state(NORMAL_MEMORY).
That way SLUB only operates on nodes with regular memory.  Any allocation
attempt on a memoryless node or a node with just highmem will fall whereupon
SLUB will fetch memory from a nearby node (depending on how memory policies
and cpuset describe fallback).
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Slab should not allocate control structures for nodes without memory.  This
may seem to work right now but its unreliable since not all allocations can
fall back due to the use of GFP_THISNODE.

Switching a few for_each_online_node's to N_NORMAL_MEMORY will allow us to
only allocate for nodes that have regular memory.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A node without memory does not need a kswapd.  So use the memory map instead
of the online map when starting kswapd.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

constrained_alloc() builds its own memory map for nodes with memory.  We have
that available in N_HIGH_MEMORY now.  So simplify the code.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

MPOL_INTERLEAVE currently simply loops over all nodes.  Allocations on
memoryless nodes will be redirected to nodes with memory.  This results in an
imbalance because the neighboring nodes to memoryless nodes will get
significantly more interleave hits that the rest of the nodes on the system.

We can avoid this imbalance by clearing the nodes in the interleave node set
that have no memory.  If we use the node map of the memory nodes instead of
the online nodes then we have only the nodes we want.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is necessary to know if nodes have memory since we have recently begun to
add support for memoryless nodes.  For that purpose we introduce a two new
node states: N_HIGH_MEMORY and N_NORMAL_MEMORY.

A node has its bit in N_HIGH_MEMORY set if it has any memory regardless of the
type of mmemory.  If a node has memory then it has at least one zone defined
in its pgdat structure that is located in the pgdat itself.

A node has its bit in N_NORMAL_MEMORY set if it has a lower zone than
ZONE_HIGHMEM.  This means it is possible to allocate memory that is not
subject to kmap.

N_HIGH_MEMORY and N_NORMAL_MEMORY can then be used in various places to insure
that we do the right thing when we encounter a memoryless node.

[akpm@linux-foundation.org: build fix]
[Lee.Schermerhorn@hp.com: update N_HIGH_MEMORY node state for memory hotadd]
[y-goto@jp.fujitsu.com: Fix memory hotplug + sparsemem build]
Signed-off-by: NLee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Why do we need to support memoryless nodes?

KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:

> For fujitsu, problem is called "empty" node.
>
> When ACPI's SRAT table includes "possible nodes", ia64 bootstrap(acpi_numa_init)
> creates nodes, which includes no memory, no cpu.
>
> I tried to remove empty-node in past, but that was denied.
> It was because we can hot-add cpu to the empty node.
> (node-hotplug triggered by cpu is not implemented now. and it will be ugly.)
>
>
> For HP, (Lee can comment on this later), they have memory-less-node.
> As far as I hear, HP's machine can have following configration.
>
> (example)
> Node0: CPU0   memory AAA MB
> Node1: CPU1   memory AAA MB
> Node2: CPU2   memory AAA MB
> Node3: CPU3   memory AAA MB
> Node4: Memory XXX GB
>
> AAA is very small value (below 16MB)  and will be omitted by ia64 bootstrap.
> After boot, only Node 4 has valid memory (but have no cpu.)
>
> Maybe this is memory-interleave by firmware config.

Christoph Lameter <clameter@sgi.com> wrote:

> Future SGI platforms (actually also current one can have but nothing like
> that is deployed to my knowledge) have nodes with only cpus. Current SGI
> platforms have nodes with just I/O that we so far cannot manage in the
> core. So the arch code maps them to the nearest memory node.

Lee Schermerhorn <Lee.Schermerhorn@hp.com> wrote:

> For the HP platforms, we can configure each cell with from 0% to 100%
> "cell local memory".  When we configure with <100% CLM, the "missing
> percentages" are interleaved by hardware on a cache-line granularity to
> improve bandwidth at the expense of latency for numa-challenged
> applications [and OSes, but not our problem ;-)].  When we boot Linux on
> such a config, all of the real nodes have no memory--it all resides in a
> single interleaved pseudo-node.
>
> When we boot Linux on a 100% CLM configuration [== NUMA], we still have
> the interleaved pseudo-node.  It contains a few hundred MB stolen from
> the real nodes to contain the DMA zone.  [Interleaved memory resides at
> phys addr 0].  The memoryless-nodes patches, along with the zoneorder
> patches, support this config as well.
>
> Also, when we boot a NUMA config with the "mem=" command line,
> specifying less memory than actually exists, Linux takes the excluded
> memory "off the top" rather than distributing it across the nodes.  This
> can result in memoryless nodes, as well.
>

This patch:

Preparation for memoryless node patches.

Provide a generic way to keep nodemasks describing various characteristics of
NUMA nodes.

Remove the node_online_map and the node_possible map and realize the same
functionality using two nodes stats: N_POSSIBLE and N_ONLINE.

[Lee.Schermerhorn@hp.com: Initialize N_*_MEMORY and N_CPU masks for non-NUMA config]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Tested-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NBob Picco <bob.picco@hp.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

prepare/commit_write no longer returns AOP_TRUNCATED_PAGE since OCFS2 and
GFS2 were converted to the new aops, so we can make some simplifications
for that.

[michal.k.k.piotrowski@gmail.com: fix warning]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement nobh in new aops.  This is a bit tricky.  FWIW, nobh_truncate is
now implemented in a way that does not create blocks in sparse regions,
which is a silly thing for it to have been doing (isn't it?)

ext2 survives fsx and fsstress. jfs is converted as well... ext3
should be easy to do (but not done yet).

[akpm@linux-foundation.org: coding-style fixes]
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Plug ocfs2 into the ->write_begin and ->write_end aops.

A bunch of custom code is now gone - the iovec iteration stuff during write
and the ocfs2 splice write actor.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNick Piggin <npiggin@suse.de>
Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Andries Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert udf to new aops.  Also seem to have fixed pagecache corruption in
udf_adinicb_commit_write -- page was marked uptodate when it is not.  Also,
fixed the silly setup where prepare_write was doing a kmap to be used in
commit_write: just do kmap_atomic in write_end.  Use libfs helpers to make
this easier.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: <bfennema@falcon.csc.calpoly.edu>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>