After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory.  Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>

net_dev is being de-referenced without proper checking; fix it.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some commands sent by smartd will offline the device.
With this change applied, smartd sill not monitor the device anymore.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Invoke cn_netlink_send() in a work context as opposed being called
in the context of  channel callback. On entry into the channel callback
code the channel inbound spin lock is held and deferring to a work
context avoids having to invoke cn_netlink_send() while holding
the inbound lock. As part of this adjustment, also increase the
timeout value for waiting for the user level component of KVP.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The host gurantees that there can be only one kvp transaction active
against the guest. So, the transaction active state is needed only to
protect against spurious user level calls. The current code had a race
condition where the guest could prematurely return because the previous
transaction state was not cleared - this state was being cleared after
sending the response to the host and there was a window where the host
could notify the guest of a new transaction before the transaction active
state was properly set.
Also deal with the case when the user mode component
does not respond in a timely fashion correctly.
I would like to thank Long Li <longli@microsoft.com>
for identifying the problem.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Diagnosed-by: NLong Li <longli@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Basically make use of the gpio array functions.
Technically the free doesn't need as much info
as given here, but this keeps it clean and easy
to follow.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This should never have been exposed to userspace
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Just convert the raw reads in this patch.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is needed to ensure the required name attribute is
created. Using an id table is the route most consistent
with other drivers.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There are far too many possible part numbers that are
not covered in here to have such a generic name.
So move to naming after one of the supported parts.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Straight forward conversion.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Follows directly from change made in previous patch.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Ensure naming reflects what is measured, not how it is done.
Resolvers can measure the same thing for starters.
IIO_GYRO->IIO_ANGL_VEL to ensure consistent naming.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Trivial conversion.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Scraps the pointless name define and adds an id table.
It's not technically required in drivers with only one supported
part but it does make the probe code more consistent.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When the new allocation code was introduced a stray pointer
to iio_dev structure was left in the chip state structure.
This was never set but was then registered with the core.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No functional change, just a trivial tidy up so all drivers
do the same thing.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver ported over to hwmon where it fits much better.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Absorb related code into brcmf_add_if/brcmf_del_if. This is part
of the net device interface clean up.
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some elements in structure brcmf_if are unused at all or
redundant. This patch cleans it up.
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Throughout the data structures within the driver several references
to the driver variables were stored. As the storage and access
functions are now consolidated into srom.c those references are
no longer needed and have been removed.
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function is called once with parameter 'off' fixed to zero. This
parameter has been removed.
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The storage of variables obtained from srom are now stored in a linked
list and lookup is done based on the enumerated identifier.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In the srom variable tables fields were identified using string
identifiers. This has been replaced by enumeration identifiers.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The driver variables from srom are stored in memory with string
identifiers and the caller needed to use this string identifier
to retrieve a driver variable. The commit changes the calling
code replacing strings with enumerated identifiers.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In the driver several driver variables were looked up that are
not supported by the srom code. These have been removed.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function brcmf_sdbrcm_bus_stop() terminates the watchdog and dpc
thread, but this function can be called from the dpc thread itself.
Stopping the dpc thread is only done when it is not the 'current'
thread.
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The driver contained locking macros which map directly to the
lock function provided by the kernel. It does not provide any
additional value so these have been removed.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The functions getvar() and getintvar() had to pass the buffer
containing the driver variables. Now they pass the structure
containing this buffer hiding what type of buffer/container
is used for storing the driver variables.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The phy code used its own driver variable lookup functions which were
duplicates of those in the brcmsmac driver (in srom.c). The phy code
now uses the functions in srom.c through the phy_shim interface.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove some single line functions for bus register/unregister interface
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

threads_only is always true as we never use the tasklet implementation.
So related code is removed.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The driver uses variables which are stored in string format. Using
strings as variable identifiers is disliked by the community. The
driver has been cleaned up and the only module providing these
variables is srom.c. The variable retrieval functions have been
moved to srom.c in preparation of a more likable way to store and
lookup these driver variables.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A bug was introduced by the following commit (Sep 13):

    staging: brcm80211: use endian annotated structures in brcmsmac

Result was that 64 bits systems will not be able to acquire an IP address.
Also the rmmod crashed. This has been fixed and retested on a Sparc64.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Dpc and timer events can now be traced. Combined with Mac80211
driver callback tracing, all entry points into the driver can now
be traced.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NAlwin Beukers <alwin@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removed the brcms_c_nmode_validate function as it only checks N-mode
capability, which should always be true.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Combined if statements in brcms_c_edcf_setparams and brcms_c_wme_setparams functions.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- removed brcms_b_dotxstatus
- changed 'fatal' argument of brcms_b_txstatus from INOUT to OUT.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- removed copying field wlc->machwcap from brcms_hardware to brcms_c_info
  during module attach.
- field wlc->machwcap was written but never read. Therefore it was removed.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- removed call to brcms_b_tx_fifo_suspended on receipt of TX FIFO suspend/flush
  completion signal.
- removed brcms_b_tx_fifo_suspended function as it is not being used elsewhere.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>