Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 13 11月, 2019 6 次提交
  3. 12 10月, 2019 1 次提交
    • W
      KVM: X86: Fix userspace set invalid CR4 · 21874027
      由 Wanpeng Li 提交于 
      commit 3ca94192278ca8de169d78c085396c424be123b3 upstream.

Reported by syzkaller:

	WARNING: CPU: 0 PID: 6544 at /home/kernel/data/kvm/arch/x86/kvm//vmx/vmx.c:4689 handle_desc+0x37/0x40 [kvm_intel]
	CPU: 0 PID: 6544 Comm: a.out Tainted: G           OE     5.3.0-rc4+ #4
	RIP: 0010:handle_desc+0x37/0x40 [kvm_intel]
	Call Trace:
	 vmx_handle_exit+0xbe/0x6b0 [kvm_intel]
	 vcpu_enter_guest+0x4dc/0x18d0 [kvm]
	 kvm_arch_vcpu_ioctl_run+0x407/0x660 [kvm]
	 kvm_vcpu_ioctl+0x3ad/0x690 [kvm]
	 do_vfs_ioctl+0xa2/0x690
	 ksys_ioctl+0x6d/0x80
	 __x64_sys_ioctl+0x1a/0x20
	 do_syscall_64+0x74/0x720
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

When CR4.UMIP is set, guest should have UMIP cpuid flag. Current
kvm set_sregs function doesn't have such check when userspace inputs
sregs values. SECONDARY_EXEC_DESC is enabled on writes to CR4.UMIP
in vmx_set_cr4 though guest doesn't have UMIP cpuid flag. The testcast
triggers handle_desc warning when executing ltr instruction since
guest architectural CR4 doesn't set UMIP. This patch fixes it by
adding valid CR4 and CPUID combination checking in __set_sregs.

syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=138efb99600000

Reported-by: syzbot+0f1819555fbdce992df9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Reviewed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      21874027
  5. 05 10月, 2019 3 次提交
    • S
      KVM: x86: Manually calculate reserved bits when loading PDPTRS · 496cf984
      由 Sean Christopherson 提交于 
      commit 16cfacc8085782dab8e365979356ce1ca87fd6cc upstream.

Manually generate the PDPTR reserved bit mask when explicitly loading
PDPTRs.  The reserved bits that are being tracked by the MMU reflect the
current paging mode, which is unlikely to be PAE paging in the vast
majority of flows that use load_pdptrs(), e.g. CR0 and CR4 emulation,
__set_sregs(), etc...  This can cause KVM to incorrectly signal a bad
PDPTR, or more likely, miss a reserved bit check and subsequently fail
a VM-Enter due to a bad VMCS.GUEST_PDPTR.

Add a one off helper to generate the reserved bits instead of sharing
code across the MMU's calculations and the PDPTR emulation.  The PDPTR
reserved bits are basically set in stone, and pushing a helper into
the MMU's calculation adds unnecessary complexity without improving
readability.

Oppurtunistically fix/update the comment for load_pdptrs().

Note, the buggy commit also introduced a deliberate functional change,
"Also remove bit 5-6 from rsvd_bits_mask per latest SDM.", which was
effectively (and correctly) reverted by commit cd9ae5fe ("KVM: x86:
Fix page-tables reserved bits").  A bit of SDM archaeology shows that
the SDM from late 2008 had a bug (likely a copy+paste error) where it
listed bits 6:5 as AVL and A for PDPTEs used for 4k entries but reserved
for 2mb entries.  I.e. the SDM contradicted itself, and bits 6:5 are and
always have been reserved.

Fixes: 20c466b5 ("KVM: Use rsvd_bits_mask in load_pdptrs()")
Cc: stable@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Reported-by: NDoug Reiland <doug.reiland@intel.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      496cf984
    • J
      KVM: x86: set ctxt->have_exception in x86_decode_insn() · 933e3e2b
      由 Jan Dakinevich 提交于 
      commit c8848cee74ff05638e913582a476bde879c968ad upstream.

x86_emulate_instruction() takes into account ctxt->have_exception flag
during instruction decoding, but in practice this flag is never set in
x86_decode_insn().

Fixes: 6ea6e843 ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: NJan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      933e3e2b
    • J
      KVM: x86: always stop emulation on page fault · 9723e445
      由 Jan Dakinevich 提交于 
      commit 8530a79c5a9f4e29e6ffb35ec1a79d81f4968ec8 upstream.

inject_emulated_exception() returns true if and only if nested page
fault happens. However, page fault can come from guest page tables
walk, either nested or not nested. In both cases we should stop an
attempt to read under RIP and give guest to step over its own page
fault handler.

This is also visible when an emulated instruction causes a #GP fault
and the VMware backdoor is enabled.  To handle the VMware backdoor,
KVM intercepts #GP faults; with only the next patch applied,
x86_emulate_instruction() injects a #GP but returns EMULATE_FAIL
instead of EMULATE_DONE.   EMULATE_FAIL causes handle_exception_nmi()
(or gp_interception() for SVM) to re-inject the original #GP because it
thinks emulation failed due to a non-VMware opcode.  This patch prevents
the issue as x86_emulate_instruction() will return EMULATE_DONE after
injecting the #GP.

Fixes: 6ea6e843 ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: NJan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9723e445
  7. 19 9月, 2019 1 次提交
  9. 16 9月, 2019 4 次提交
    • S
      KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels · df5d4ea2
      由 Sean Christopherson 提交于 
      [ Upstream commit b68f3cc7d978943fcf85148165b00594c38db776 ]

Invoking the 64-bit variation on a 32-bit kenrel will crash the guest,
trigger a WARN, and/or lead to a buffer overrun in the host, e.g.
rsm_load_state_64() writes r8-r15 unconditionally, but enum kvm_reg and
thus x86_emulate_ctxt._regs only define r8-r15 for CONFIG_X86_64.

KVM allows userspace to report long mode support via CPUID, even though
the guest is all but guaranteed to crash if it actually tries to enable
long mode.  But, a pure 32-bit guest that is ignorant of long mode will
happily plod along.

SMM complicates things as 64-bit CPUs use a different SMRAM save state
area.  KVM handles this correctly for 64-bit kernels, e.g. uses the
legacy save state map if userspace has hid long mode from the guest,
but doesn't fare well when userspace reports long mode support on a
32-bit host kernel (32-bit KVM doesn't support 64-bit guests).

Since the alternative is to crash the guest, e.g. by not loading state
or explicitly requesting shutdown, unconditionally use the legacy SMRAM
save state map for 32-bit KVM.  If a guest has managed to get far enough
to handle SMIs when running under a weird/buggy userspace hypervisor,
then don't deliberately crash the guest since there are no downsides
(from KVM's perspective) to allow it to continue running.

Fixes: 660a5d51 ("KVM: x86: save/load state on SMM switch")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      df5d4ea2
    • W
      x86/kvm: move kvm_load/put_guest_xcr0 into atomic context · 7a74d806
      由 WANG Chao 提交于 
      [ Upstream commit 1811d979c71621aafc7b879477202d286f7e863b ]

guest xcr0 could leak into host when MCE happens in guest mode. Because
do_machine_check() could schedule out at a few places.

For example:

kvm_load_guest_xcr0
...
kvm_x86_ops->run(vcpu) {
  vmx_vcpu_run
    vmx_complete_atomic_exit
      kvm_machine_check
        do_machine_check
          do_memory_failure
            memory_failure
              lock_page

In this case, host_xcr0 is 0x2ff, guest vcpu xcr0 is 0xff. After schedule
out, host cpu has guest xcr0 loaded (0xff).

In __switch_to {
     switch_fpu_finish
       copy_kernel_to_fpregs
         XRSTORS

If any bit i in XSTATE_BV[i] == 1 and xcr0[i] == 0, XRSTORS will
generate #GP (In this case, bit 9). Then ex_handler_fprestore kicks in
and tries to reinitialize fpu by restoring init fpu state. Same story as
last #GP, except we get DOUBLE FAULT this time.

Cc: stable@vger.kernel.org
Signed-off-by: NWANG Chao <chao.wang@ucloud.cn>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      7a74d806
    • B
      kvm: mmu: Fix overflow on kvm mmu page limit calculation · 163b24b1
      由 Ben Gardon 提交于 
      [ Upstream commit bc8a3d8925a8fa09fa550e0da115d95851ce33c6 ]

KVM bases its memory usage limits on the total number of guest pages
across all memslots. However, those limits, and the calculations to
produce them, use 32 bit unsigned integers. This can result in overflow
if a VM has more guest pages that can be represented by a u32. As a
result of this overflow, KVM can use a low limit on the number of MMU
pages it will allocate. This makes KVM unable to map all of guest memory
at once, prompting spurious faults.

Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch
	introduced no new failures.
Signed-off-by: NBen Gardon <bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      163b24b1
    • L
      KVM: hyperv: define VP assist page helpers · cdad0f65
      由 Ladi Prosek 提交于 
      [ Upstream commit 72bbf9358c3676bd89dc4bd8fb0b1f2a11c288fc ]

The state related to the VP assist page is still managed by the LAPIC
code in the pv_eoi field.
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      cdad0f65
  11. 06 9月, 2019 1 次提交
  13. 16 8月, 2019 1 次提交
    • W
      KVM: Fix leak vCPU's VMCS value into other pCPU · 2bc73d91
      由 Wanpeng Li 提交于 
      commit 17e433b54393a6269acbcb792da97791fe1592d8 upstream.

After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a
five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs
on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting
in the VMs after stress testing:

 INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073)
 Call Trace:
   flush_tlb_mm_range+0x68/0x140
   tlb_flush_mmu.part.75+0x37/0xe0
   tlb_finish_mmu+0x55/0x60
   zap_page_range+0x142/0x190
   SyS_madvise+0x3cd/0x9c0
   system_call_fastpath+0x1c/0x21

swait_active() sustains to be true before finish_swait() is called in
kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account
by kvm_vcpu_on_spin() loop greatly increases the probability condition
kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv
is enabled the yield-candidate vCPU's VMCS RVI field leaks(by
vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current
VMCS.

This patch fixes it by checking conservatively a subset of events.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Cc: stable@vger.kernel.org
Fixes: 98f4a146 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop)
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2bc73d91
  15. 10 7月, 2019 1 次提交
  17. 09 6月, 2019 1 次提交
    • T
      KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID · 6a2fbec7
      由 Thomas Huth 提交于 
      commit a86cb413f4bf273a9d341a3ab2c2ca44e12eb317 upstream.

KVM_CAP_MAX_VCPU_ID is currently always reporting KVM_MAX_VCPU_ID on all
architectures. However, on s390x, the amount of usable CPUs is determined
during runtime - it is depending on the features of the machine the code
is running on. Since we are using the vcpu_id as an index into the SCA
structures that are defined by the hardware (see e.g. the sca_add_vcpu()
function), it is not only the amount of CPUs that is limited by the hard-
ware, but also the range of IDs that we can use.
Thus KVM_CAP_MAX_VCPU_ID must be determined during runtime on s390x, too.
So the handling of KVM_CAP_MAX_VCPU_ID has to be moved from the common
code into the architecture specific code, and on s390x we have to return
the same value here as for KVM_CAP_MAX_VCPUS.
This problem has been discovered with the kvm_create_max_vcpus selftest.
With this change applied, the selftest now passes on s390x, too.
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-9-thuth@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6a2fbec7
  19. 31 5月, 2019 1 次提交
  21. 22 5月, 2019 1 次提交
    • S
      KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes · 3b5ea2df
      由 Sean Christopherson 提交于 
      commit 11988499e62b310f3bf6f6d0a807a06d3f9ccc96 upstream.

KVM allows userspace to violate consistency checks related to the
guest's CPUID model to some degree.  Generally speaking, userspace has
carte blanche when it comes to guest state so long as jamming invalid
state won't negatively affect the host.

Currently this is seems to be a non-issue as most of the interesting
EFER checks are missing, e.g. NX and LME, but those will be added
shortly.  Proactively exempt userspace from the CPUID checks so as not
to break userspace.

Note, the efer_reserved_bits check still applies to userspace writes as
that mask reflects the host's capabilities, e.g. KVM shouldn't allow a
guest to run with NX=1 if it has been disabled in the host.

Fixes: d8017474 ("KVM: SVM: Only allow setting of EFER_SVME when CPUID SVM is set")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3b5ea2df
  23. 05 5月, 2019 1 次提交
  25. 03 4月, 2019 2 次提交
    • S
      KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts · 3a18eaba
      由 Sean Christopherson 提交于 
      commit 0cf9135b773bf32fba9dd8e6699c1b331ee4b749 upstream.

The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host
userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES
regardless of hardware support under the pretense that KVM fully
emulates MSR_IA32_ARCH_CAPABILITIES.  Unfortunately, only VMX hosts
handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS
also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts).

Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so
that it's emulated on AMD hosts.

Fixes: 1eaafe91 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported")
Cc: stable@vger.kernel.org
Reported-by: NXiaoyao Li <xiaoyao.li@linux.intel.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3a18eaba
    • S
      KVM: x86: update %rip after emulating IO · b9733a74
      由 Sean Christopherson 提交于 
      commit 45def77ebf79e2e8942b89ed79294d97ce914fa0 upstream.

Most (all?) x86 platforms provide a port IO based reset mechanism, e.g.
OUT 92h or CF9h.  Userspace may emulate said mechanism, i.e. reset a
vCPU in response to KVM_EXIT_IO, without explicitly announcing to KVM
that it is doing a reset, e.g. Qemu jams vCPU state and resumes running.

To avoid corruping %rip after such a reset, commit 0967b7bf ("KVM:
Skip pio instruction when it is emulated, not executed") changed the
behavior of PIO handlers, i.e. today's "fast" PIO handling to skip the
instruction prior to exiting to userspace.  Full emulation doesn't need
such tricks becase re-emulating the instruction will naturally handle
%rip being changed to point at the reset vector.

Updating %rip prior to executing to userspace has several drawbacks:

  - Userspace sees the wrong %rip on the exit, e.g. if PIO emulation
    fails it will likely yell about the wrong address.
  - Single step exits to userspace for are effectively dropped as
    KVM_EXIT_DEBUG is overwritten with KVM_EXIT_IO.
  - Behavior of PIO emulation is different depending on whether it
    goes down the fast path or the slow path.

Rather than skip the PIO instruction before exiting to userspace,
snapshot the linear %rip and cancel PIO completion if the current
value does not match the snapshot.  For a 64-bit vCPU, i.e. the most
common scenario, the snapshot and comparison has negligible overhead
as VMCS.GUEST_RIP will be cached regardless, i.e. there is no extra
VMREAD in this case.

All other alternatives to snapshotting the linear %rip that don't
rely on an explicit reset announcenment suffer from one corner case
or another.  For example, canceling PIO completion on any write to
%rip fails if userspace does a save/restore of %rip, and attempting to
avoid that issue by canceling PIO only if %rip changed then fails if PIO
collides with the reset %rip.  Attempting to zero in on the exact reset
vector won't work for APs, which means adding more hooks such as the
vCPU's MP_STATE, and so on and so forth.

Checking for a linear %rip match technically suffers from corner cases,
e.g. userspace could theoretically rewrite the underlying code page and
expect a different instruction to execute, or the guest hardcodes a PIO
reset at 0xfffffff0, but those are far, far outside of what can be
considered normal operation.

Fixes: 432baf60 ("KVM: VMX: use kvm_fast_pio_in for handling IN I/O")
Cc: <stable@vger.kernel.org>
Reported-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b9733a74
  27. 24 3月, 2019 1 次提交
    • S
      KVM: Call kvm_arch_memslots_updated() before updating memslots · 23ad135a
      由 Sean Christopherson 提交于 
      commit 152482580a1b0accb60676063a1ac57b2d12daf6 upstream.

kvm_arch_memslots_updated() is at this point in time an x86-specific
hook for handling MMIO generation wraparound.  x86 stashes 19 bits of
the memslots generation number in its MMIO sptes in order to avoid
full page fault walks for repeat faults on emulated MMIO addresses.
Because only 19 bits are used, wrapping the MMIO generation number is
possible, if unlikely.  kvm_arch_memslots_updated() alerts x86 that
the generation has changed so that it can invalidate all MMIO sptes in
case the effective MMIO generation has wrapped so as to avoid using a
stale spte, e.g. a (very) old spte that was created with generation==0.

Given that the purpose of kvm_arch_memslots_updated() is to prevent
consuming stale entries, it needs to be called before the new generation
is propagated to memslots.  Invalidating the MMIO sptes after updating
memslots means that there is a window where a vCPU could dereference
the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO
spte that was created with (pre-wrap) generation==0.

Fixes: e59dbe09 ("KVM: Introduce kvm_arch_memslots_updated()")
Cc: <stable@vger.kernel.org>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      23ad135a
  29. 13 2月, 2019 1 次提交
  31. 31 1月, 2019 2 次提交
  33. 29 12月, 2018 2 次提交
    • E
      kvm: x86: Add AMD's EX_CFG to the list of ignored MSRs · 229468c6
      由 Eduardo Habkost 提交于 
      commit 0e1b869fff60c81b510c2d00602d778f8f59dd9a upstream.

Some guests OSes (including Windows 10) write to MSR 0xc001102c
on some cases (possibly while trying to apply a CPU errata).
Make KVM ignore reads and writes to that MSR, so the guest won't
crash.

The MSR is documented as "Execution Unit Configuration (EX_CFG)",
at AMD's "BIOS and Kernel Developer's Guide (BKDG) for AMD Family
15h Models 00h-0Fh Processors".

Cc: stable@vger.kernel.org
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      229468c6
    • W
      KVM: X86: Fix NULL deref in vcpu_scan_ioapic · 76281d12
      由 Wanpeng Li 提交于 
      commit dcbd3e49 upstream.

Reported by syzkaller:

    CPU: 1 PID: 5962 Comm: syz-executor118 Not tainted 4.20.0-rc6+ #374
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    RIP: 0010:kvm_apic_hw_enabled arch/x86/kvm/lapic.h:169 [inline]
    RIP: 0010:vcpu_scan_ioapic arch/x86/kvm/x86.c:7449 [inline]
    RIP: 0010:vcpu_enter_guest arch/x86/kvm/x86.c:7602 [inline]
    RIP: 0010:vcpu_run arch/x86/kvm/x86.c:7874 [inline]
    RIP: 0010:kvm_arch_vcpu_ioctl_run+0x5296/0x7320 arch/x86/kvm/x86.c:8074
    Call Trace:
	 kvm_vcpu_ioctl+0x5c8/0x1150 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2596
	 vfs_ioctl fs/ioctl.c:46 [inline]
	 file_ioctl fs/ioctl.c:509 [inline]
	 do_vfs_ioctl+0x1de/0x1790 fs/ioctl.c:696
	 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:713
	 __do_sys_ioctl fs/ioctl.c:720 [inline]
	 __se_sys_ioctl fs/ioctl.c:718 [inline]
	 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
	 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT14 msr
and triggers scan ioapic logic to load synic vectors into EOI exit bitmap.
However, irqchip is not initialized by this simple testcase, ioapic/apic
objects should not be accessed.

This patch fixes it by also considering whether or not apic is present.

Reported-by: syzbot+39810e6c400efadfef71@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      76281d12
  35. 06 12月, 2018 3 次提交
    • W
      KVM: X86: Fix scan ioapic use-before-initialization · 61c42d65
      由 Wanpeng Li 提交于 
      commit e97f852fd4561e77721bb9a4e0ea9d98305b1e93 upstream.

Reported by syzkaller:

 BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8
 PGD 80000003ec4da067 P4D 80000003ec4da067 PUD 3f7bfa067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 7 PID: 5059 Comm: debug Tainted: G           OE     4.19.0-rc5 #16
 RIP: 0010:__lock_acquire+0x1a6/0x1990
 Call Trace:
  lock_acquire+0xdb/0x210
  _raw_spin_lock+0x38/0x70
  kvm_ioapic_scan_entry+0x3e/0x110 [kvm]
  vcpu_enter_guest+0x167e/0x1910 [kvm]
  kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm]
  kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm]
  do_vfs_ioctl+0xa5/0x690
  ksys_ioctl+0x6d/0x80
  __x64_sys_ioctl+0x1a/0x20
  do_syscall_64+0x83/0x6e0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr
and triggers scan ioapic logic to load synic vectors into EOI exit bitmap.
However, irqchip is not initialized by this simple testcase, ioapic/apic
objects should not be accessed.
This can be triggered by the following program:

    #define _GNU_SOURCE

    #include <endian.h>
    #include <stdint.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <sys/syscall.h>
    #include <sys/types.h>
    #include <unistd.h>

    uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff};

    int main(void)
    {
    	syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
    	long res = 0;
    	memcpy((void*)0x20000040, "/dev/kvm", 9);
    	res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0);
    	if (res != -1)
    		r[0] = res;
    	res = syscall(__NR_ioctl, r[0], 0xae01, 0);
    	if (res != -1)
    		r[1] = res;
    	res = syscall(__NR_ioctl, r[1], 0xae41, 0);
    	if (res != -1)
    		r[2] = res;
    	memcpy(
    			(void*)0x20000080,
    			"\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00"
    			"\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43"
    			"\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33"
    			"\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe"
    			"\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22"
    			"\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb",
    			106);
    	syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080);
    	syscall(__NR_ioctl, r[2], 0xae80, 0);
    	return 0;
    }

This patch fixes it by bailing out scan ioapic if ioapic is not initialized in
kernel.
Reported-by: NWei Wu <ww9210@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wei Wu <ww9210@gmail.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      61c42d65
    • L
      KVM: x86: Fix kernel info-leak in KVM_HC_CLOCK_PAIRING hypercall · 6d772df4
      由 Liran Alon 提交于 
      commit bcbfbd8ec21096027f1ee13ce6c185e8175166f6 upstream.

kvm_pv_clock_pairing() allocates local var
"struct kvm_clock_pairing clock_pairing" on stack and initializes
all it's fields besides padding (clock_pairing.pad[]).

Because clock_pairing var is written completely (including padding)
to guest memory, failure to init struct padding results in kernel
info-leak.

Fix the issue by making sure to also init the padding with zeroes.

Fixes: 55dd00a7 ("KVM: x86: add KVM_HC_CLOCK_PAIRING hypercall")
Reported-by: syzbot+a8ef68d71211ba264f56@syzkaller.appspotmail.com
Reviewed-by: NMark Kanda <mark.kanda@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6d772df4
    • L
      KVM: nVMX/nSVM: Fix bug which sets vcpu->arch.tsc_offset to L1 tsc_offset · 76c8476c
      由 Leonid Shatz 提交于 
      commit 326e742533bf0a23f0127d8ea62fb558ba665f08 upstream.

Since commit e79f245d ("X86/KVM: Properly update 'tsc_offset' to
represent the running guest"), vcpu->arch.tsc_offset meaning was
changed to always reflect the tsc_offset value set on active VMCS.
Regardless if vCPU is currently running L1 or L2.

However, above mentioned commit failed to also change
kvm_vcpu_write_tsc_offset() to set vcpu->arch.tsc_offset correctly.
This is because vmx_write_tsc_offset() could set the tsc_offset value
in active VMCS to given offset parameter *plus vmcs12->tsc_offset*.
However, kvm_vcpu_write_tsc_offset() just sets vcpu->arch.tsc_offset
to given offset parameter. Without taking into account the possible
addition of vmcs12->tsc_offset. (Same is true for SVM case).

Fix this issue by changing kvm_x86_ops->write_tsc_offset() to return
actually set tsc_offset in active VMCS and modify
kvm_vcpu_write_tsc_offset() to set returned value in
vcpu->arch.tsc_offset.
In addition, rename write_tsc_offset() callback to write_l1_tsc_offset()
to make it clear that it is meant to set L1 TSC offset.

Fixes: e79f245d ("X86/KVM: Properly update 'tsc_offset' to represent the running guest")
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Reviewed-by: NMihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NLeonid Shatz <leonid.shatz@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      76c8476c
  37. 01 10月, 2018 1 次提交
  39. 21 9月, 2018 1 次提交
  41. 20 9月, 2018 5 次提交
    • D
      KVM: x86: Control guest reads of MSR_PLATFORM_INFO · 6fbbde9a
      由 Drew Schmitt 提交于 
      Add KVM_CAP_MSR_PLATFORM_INFO so that userspace can disable guest access
to reads of MSR_PLATFORM_INFO.

Disabling access to reads of this MSR gives userspace the control to "expose"
this platform-dependent information to guests in a clear way. As it exists
today, guests that read this MSR would get unpopulated information if userspace
hadn't already set it (and prior to this patch series, only the CPUID faulting
information could have been populated). This existing interface could be
confusing if guests don't handle the potential for incorrect/incomplete
information gracefully (e.g. zero reported for base frequency).
Signed-off-by: NDrew Schmitt <dasch@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      6fbbde9a
    • D
      KVM: x86: Turbo bits in MSR_PLATFORM_INFO · d84f1cff
      由 Drew Schmitt 提交于 
      Allow userspace to set turbo bits in MSR_PLATFORM_INFO. Previously, only
the CPUID faulting bit was settable. But now any bit in
MSR_PLATFORM_INFO would be settable. This can be used, for example, to
convey frequency information about the platform on which the guest is
running.
Signed-off-by: NDrew Schmitt <dasch@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      d84f1cff
    • L
      KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv · e6c67d8c
      由 Liran Alon 提交于 
      In case L1 do not intercept L2 HLT or enter L2 in HLT activity-state,
it is possible for a vCPU to be blocked while it is in guest-mode.

According to Intel SDM 26.6.5 Interrupt-Window Exiting and
Virtual-Interrupt Delivery: "These events wake the logical processor
if it just entered the HLT state because of a VM entry".
Therefore, if L1 enters L2 in HLT activity-state and L2 has a pending
deliverable interrupt in vmcs12->guest_intr_status.RVI, then the vCPU
should be waken from the HLT state and injected with the interrupt.

In addition, if while the vCPU is blocked (while it is in guest-mode),
it receives a nested posted-interrupt, then the vCPU should also be
waken and injected with the posted interrupt.

To handle these cases, this patch enhances kvm_vcpu_has_events() to also
check if there is a pending interrupt in L2 virtual APICv provided by
L1. That is, it evaluates if there is a pending virtual interrupt for L2
by checking RVI[7:4] > VPPR[7:4] as specified in Intel SDM 29.2.1
Evaluation of Pending Interrupts.

Note that this also handles the case of nested posted-interrupt by the
fact RVI is updated in vmx_complete_nested_posted_interrupt() which is
called from kvm_vcpu_check_block() -> kvm_arch_vcpu_runnable() ->
kvm_vcpu_running() -> vmx_check_nested_events() ->
vmx_complete_nested_posted_interrupt().
Reviewed-by: NNikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: NDarren Kenny <darren.kenny@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      e6c67d8c
    • S
      kvm: x86: make kvm_{load|put}_guest_fpu() static · 822f312d
      由 Sebastian Andrzej Siewior 提交于 
      The functions
	kvm_load_guest_fpu()
	kvm_put_guest_fpu()

are only used locally, make them static. This requires also that both
functions are moved because they are used before their implementation.
Those functions were exported (via EXPORT_SYMBOL) before commit
e5bb4025 ("KVM: Drop kvm_{load,put}_guest_fpu() exports").
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      822f312d
    • S
      KVM: VMX: use preemption timer to force immediate VMExit · d264ee0c
      由 Sean Christopherson 提交于 
      A VMX preemption timer value of '0' is guaranteed to cause a VMExit
prior to the CPU executing any instructions in the guest.  Use the
preemption timer (if it's supported) to trigger immediate VMExit
in place of the current method of sending a self-IPI.  This ensures
that pending VMExit injection to L1 occurs prior to executing any
instructions in the guest (regardless of nesting level).

When deferring VMExit injection, KVM generates an immediate VMExit
from the (possibly nested) guest by sending itself an IPI.  Because
hardware interrupts are blocked prior to VMEnter and are unblocked
(in hardware) after VMEnter, this results in taking a VMExit(INTR)
before any guest instruction is executed.  But, as this approach
relies on the IPI being received before VMEnter executes, it only
works as intended when KVM is running as L0.  Because there are no
architectural guarantees regarding when IPIs are delivered, when
running nested the INTR may "arrive" long after L2 is running e.g.
L0 KVM doesn't force an immediate switch to L1 to deliver an INTR.

For the most part, this unintended delay is not an issue since the
events being injected to L1 also do not have architectural guarantees
regarding their timing.  The notable exception is the VMX preemption
timer[1], which is architecturally guaranteed to cause a VMExit prior
to executing any instructions in the guest if the timer value is '0'
at VMEnter.  Specifically, the delay in injecting the VMExit causes
the preemption timer KVM unit test to fail when run in a nested guest.

Note: this approach is viable even on CPUs with a broken preemption
timer, as broken in this context only means the timer counts at the
wrong rate.  There are no known errata affecting timer value of '0'.

[1] I/O SMIs also have guarantees on when they arrive, but I have
    no idea if/how those are emulated in KVM.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
[Use a hook for SVM instead of leaving the default in x86.c - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      d264ee0c