- 13 5月, 2010 1 次提交
-
-
由 Marcelo Tosatti 提交于
kvm_set_irq is used from non sleepable contexes, so convert ioapic from mutex to spinlock. KVM-Stable-Tag. Tested-by: NRalf Bonenkamp <ralf.bonenkamp@swyx.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 21 4月, 2010 1 次提交
-
-
由 Lai Jiangshan 提交于
I got this dmesg due to srcu_read_lock() is missing in kvm_mmu_notifier_release(). =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- arch/x86/kvm/x86.h:72 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by qemu-system-x86/3100: #0: (rcu_read_lock){.+.+..}, at: [<ffffffff810d73dc>] __mmu_notifier_release+0x38/0xdf #1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa0130a6a>] kvm_mmu_zap_all+0x21/0x5e [kvm] stack backtrace: Pid: 3100, comm: qemu-system-x86 Not tainted 2.6.34-rc3-22949-gbc8a97a-dirty #2 Call Trace: [<ffffffff8106afd9>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffffa0123a89>] unalias_gfn+0x56/0xab [kvm] [<ffffffffa0119600>] gfn_to_memslot+0x16/0x25 [kvm] [<ffffffffa012ffca>] gfn_to_rmap+0x17/0x6e [kvm] [<ffffffffa01300c1>] rmap_remove+0xa0/0x19d [kvm] [<ffffffffa0130649>] kvm_mmu_zap_page+0x109/0x34d [kvm] [<ffffffffa0130a7e>] kvm_mmu_zap_all+0x35/0x5e [kvm] [<ffffffffa0122870>] kvm_arch_flush_shadow+0x16/0x22 [kvm] [<ffffffffa01189e0>] kvm_mmu_notifier_release+0x15/0x17 [kvm] [<ffffffff810d742c>] __mmu_notifier_release+0x88/0xdf [<ffffffff810d73dc>] ? __mmu_notifier_release+0x38/0xdf [<ffffffff81040848>] ? exit_mm+0xe0/0x115 [<ffffffff810c2cb0>] exit_mmap+0x2c/0x17e [<ffffffff8103c472>] mmput+0x2d/0xd4 [<ffffffff81040870>] exit_mm+0x108/0x115 [...] Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 20 4月, 2010 1 次提交
-
-
由 Takuya Yoshikawa 提交于
Int is not long enough to store the size of a dirty bitmap. This patch fixes this problem with the introduction of a wrapper function to calculate the sizes of dirty bitmaps. Note: in mark_page_dirty(), we have to consider the fact that __set_bit() takes the offset as int, not long. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 01 3月, 2010 23 次提交
-
-
由 Avi Kivity 提交于
The code relies on kvm->requests_lock inhibiting preemption. Noted by Jan Kiszka. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
wqh is unused, so we do not need to store it in irqfd anymore Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Wei Yongjun 提交于
If we fail to init ioapic device or the fail to setup the default irq routing, the device register by kvm_create_pic() and kvm_ioapic_init() remain unregister. This patch fixed to do this. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Wei Yongjun 提交于
kvm->arch.vioapic should be NULL in case of kvm_ioapic_init() failure due to cannot register io dev. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jochen Maes 提交于
Fixed 2 codestyle issues in virt/kvm/coalesced_mmio.c Signed-off-by: NJochen Maes <jochen.maes@sejo.be> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a generic function to find out the host page size for a given gfn. This function is needed by the kvm iommu code. This patch also simplifies the x86 host_mapping_level function. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Zhai, Edwin 提交于
Enable optional parameter (default 0) - PCI segment (or domain) besides BDF, when assigning PCI device to guest. Signed-off-by: NZhai Edwin <edwin.zhai@intel.com> Acked-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Sheng Yang 提交于
The commit 0953ca73 "KVM: Simplify coalesced mmio initialization" allocate kvm_coalesced_mmio_ring in the kvm_coalesced_mmio_init(), but didn't discard the original allocation... Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
cleanup_srcu_struct on VM destruction remains broken: BUG: unable to handle kernel paging request at ffffffffffffffff IP: [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 RIP: 0010:[<ffffffff802533d2>] [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 Call Trace: [<ffffffffa05354c4>] kvm_arch_vcpu_uninit+0x1b/0x48 [kvm] [<ffffffffa05339c6>] kvm_vcpu_uninit+0x9/0x15 [kvm] [<ffffffffa0569f7d>] vmx_free_vcpu+0x7f/0x8f [kvm_intel] [<ffffffffa05357b5>] kvm_arch_destroy_vm+0x78/0x111 [kvm] [<ffffffffa053315b>] kvm_put_kvm+0xd4/0xfe [kvm] Move it to kvm_arch_destroy_vm. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Reported-by: NJan Kiszka <jan.kiszka@siemens.com>
-
由 Avi Kivity 提交于
When the guest acknowledges an interrupt, it sends an EOI message to the local apic, which broadcasts it to the ioapic. To handle the EOI, we need to take the ioapic mutex. On large guests, this causes a lot of contention on this mutex. Since large guests usually don't route interrupts via the ioapic (they use msi instead), this is completely unnecessary. Avoid taking the mutex by introducing a handled_vectors bitmap. Before taking the mutex, check if the ioapic was actually responsible for the acked vector. If not, we can return early. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Using a similar two-step procedure as for memslots. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Use two steps for memslot deletion: mark the slot invalid (which stops instantiation of new shadow pages for that slot, but allows destruction), then instantiate the new empty slot. Also simplifies kvm_handle_hva locking. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
So its possible to iommu map a memslot before making it visible to kvm. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Which takes a memslot pointer instead of using kvm->memslots. To be used by SRCU convertion later. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Required for SRCU convertion later. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Have a pointer to an allocated region inside struct kvm. [alex: fix ppc book 3s] Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
- add destructor function - move related allocation into constructor - add stubs for !CONFIG_KVM_MMIO Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
s390 doesn't have mmio, this will simplify ifdefing it out. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
They aren't related. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 25 1月, 2010 3 次提交
-
-
由 Michael S. Tsirkin 提交于
kvm didn't clear irqfd counter on deassign, as a result we could get a spurious interrupt when irqfd is assigned back. this leads to poor performance and, in theory, guest crash. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Otherwise memory beyond irq_states[16] might be accessed. Noticed by Juan Quintela. Cc: stable@kernel.org Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Acked-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael S. Tsirkin 提交于
Looks like repeatedly binding same fd to multiple gsi's with irqfd can use up a ton of kernel memory for irqfd structures. A simple fix is to allow each fd to only trigger one gsi: triggering a storm of interrupts in guest is likely useless anyway, and we can do it by binding a single gsi to many interrupts if we really want to. Cc: stable@kernel.org Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NAcked-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 27 12月, 2009 2 次提交
-
-
由 Heiko Carstens 提交于
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_create_vm': arch/s390/kvm/../../../virt/kvm/kvm_main.c:409: warning: label 'out_err' defined but not used Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
One possible order is: KVM_CREATE_IRQCHIP ioctl(took kvm->lock) -> kvm_iobus_register_dev() -> down_write(kvm->slots_lock). The other one is in kvm_vm_ioctl_assign_device(), which take kvm->slots_lock first, then kvm->lock. Update the comment of lock order as well. Observe it due to kernel locking debug warnings. Cc: stable@kernel.org Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 23 12月, 2009 1 次提交
-
-
由 Roland Dreier 提交于
It seems a couple places such as arch/ia64/kernel/perfmon.c and drivers/infiniband/core/uverbs_main.c could use anon_inode_getfile() instead of a private pseudo-fs + alloc_file(), if only there were a way to get a read-only file. So provide this by having anon_inode_getfile() create a read-only file if we pass O_RDONLY in flags. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 12月, 2009 7 次提交
-
-
由 Avi Kivity 提交于
Usually userspace will freeze the guest so we can inspect it, but some internal state is not available. Add extra data to internal error reporting so we can expose it to the debugger. Extra data is specific to the suberror. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Otherwise kvm might attempt to dereference a NULL pointer. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Arnd Bergmann 提交于
With big endian userspace, we can't quite figure out if a pointer is 32 bit (shifted >> 32) or 64 bit when we read a 64 bit pointer. This is what happens with dirty logging. To get the pointer interpreted correctly, we thus need Arnd's patch to implement a compat layer for the ioctl: A better way to do this is to add a separate compat_ioctl() method that converts this for you. Based on initial patch from Arnd Bergmann. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
find_first_zero_bit works with bit numbers, not bytes. Fixes https://sourceforge.net/tracker/?func=detail&aid=2847560&group_id=180599&atid=893831Reported-by: N"Xu, Jiajun" <jiajun.xu@intel.com> Cc: stable@kernel.org Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zhai, Edwin 提交于
Introduce kvm_vcpu_on_spin, to be used by VMX/SVM to yield processing once the cpu detects pause-based looping. Signed-off-by: N"Zhai, Edwin" <edwin.zhai@intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jiri Slaby 提交于
Stanse found 2 lock imbalances in kvm_request_irq_source_id and kvm_free_irq_source_id. They omit to unlock kvm->irq_lock on fail paths. Fix that by adding unlock labels at the end of the functions and jump there from the fail paths. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Alexander Graf 提交于
X86 CPUs need to have some magic happening to enable the virtualization extensions on them. This magic can result in unpleasant results for users, like blocking other VMMs from working (vmx) or using invalid TLB entries (svm). Currently KVM activates virtualization when the respective kernel module is loaded. This blocks us from autoloading KVM modules without breaking other VMMs. To circumvent this problem at least a bit, this patch introduces on demand activation of virtualization. This means, that instead virtualization is enabled on creation of the first virtual machine and disabled on destruction of the last one. So using this, KVM can be easily autoloaded, while keeping other hypervisors usable. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-