Switch the memory policy of the kevent threads to MPOL_DEFAULT while
leaving the kzalloc of the workqueue structure on interleave.  This means
that all code executed in the context of the kevent thread is allocating
node local.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Alok Kataria <alok.kataria@calsoftinc.com>
Cc: Andi Kleen <ak@suse.de>
Cc: <pj@sgi.com>
Cc: <shai@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This file, ext4.txt, was put together with information from Andrew Morton,
Andreas Dilger, Suparna Bhattacharya, and Ted Ts'o.

I copied the mount options, with the exception of "extents", from ext3.txt,
so if anyone is aware of anything out-of-date, please let me know.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Suparna Bhattacharya <suparna@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Someone's tab key is emitting spaces.  Attempt to repair some of the damage.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Current error behaviour for ext2 and ext3 filesystems does not fully
correspond to the documentation and should be fixed.

According to man 8 mount, ext2 and ext3 file systems allow to set one of 3
different on-errors behaviours:

  ---- start of quote man 8 mount ----

  errors=continue / errors=remount-ro / errors=panic

    Define the behaviour when an error is encountered.  (Either ignore
    errors and just mark the file system erroneous and continue, or remount
    the file system read-only, or panic and halt the system.) The default is
    set in the filesystem superblock, and can be changed using tune2fs(8).

  ---- end of quote ----

However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt.  It leads to the incorrect
handle of errors on ext3.

Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:

- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);

- parse_option() does not clean the alternative values and thus something
  like (ERRORS_CONT|ERRORS_RO) can be set;

- if options are omitted, parse_option() does not set any of these options.

Therefore it is possible to set any combination of these options on the ext2:

- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
  options;

- any of them may be set using mount options;

- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
  superblock and other value in mount options;

- and finally all three options may be set by adding third option in remount.

Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles.  However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.

This patch:

EXT4_ERRORS_CONTINUE should be taken from the superblock as default value for
error behaviour.
Signed-off-by: NDmitry Mishin <dim@openvz.org>
Acked-by: NVasily Averin <vvs@sw.ru>
Acked-by: NKirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I assume this means "logical sb block".  So call it that.

I still don't understand the name though.  A block is a block.  What's
different about this one?

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_LBD=n, sector_div() expands to a plain old divide.  But ext4 is
_not_ passing in a sector_t as the first argument, so...

fs/built-in.o: In function `ext4_get_group_no_and_offset':
fs/ext4/balloc.c:39: undefined reference to `__umoddi3'
fs/ext4/balloc.c:41: undefined reference to `__udivdi3'
fs/built-in.o: In function `find_group_orlov':
fs/ext4/ialloc.c:278: undefined reference to `__udivdi3'
fs/built-in.o: In function `ext4_fill_super':
fs/ext4/super.c:1488: undefined reference to `__udivdi3'
fs/ext4/super.c:1488: undefined reference to `__umoddi3'
fs/ext4/super.c:1594: undefined reference to `__udivdi3'
fs/ext4/super.c:1601: undefined reference to `__umoddi3'

Fix that up by calling do_div() directly.

Also cast the arg to u64.  do_div() is only defined on u64, and ext4_fsblk_t
is supposed to be opaque.

Note especially the changes to find_group_orlov().  It was attempting to do

	do_div(int, unsigned long long);

which is royally screwed up.  Switched it to plain old divide.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Way too big to inline.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

move '_hi' bits of block numbers in the larger part of the
block group descriptor structure
Signed-off-by: NAlexandre Ratchov <alexandre.ratchov@bull.net>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

make block group descriptor larger.
Signed-off-by: NAlexandre Ratchov <alexandre.ratchov@bull.net>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Similar to ext4, change blocks in JBD2 from sector_t to unsigned long long.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Previously when in-kernel ext4 block type is sector_t, it's only 4 bits long
under some 32bit arch (when CONFIG_LBD is not on).  So we need to check the
size of sector_t before we read 48bit long on-disk blocks to in-kernel blocks.

These checks are unnecessary now as we changed the in-kernel blocks to
unsigned longlong.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change ext4 in-kernel block type (ext4_fsblk_t) from sector_t to unsigned
long long.  Remove ext4 block type string micro E3FSBLK, replaced with "%llu"

[akpm@osdl.org: build fix]
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In-kernel super block changes to support >32 bit free blocks numbers.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAlexandre Ratchov <alexandre.ratchov@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As we are planning to support 48-bit block numbers for ext4, we need to
support 48-bit block numbers for extended attributes.  In the short term, we
can do this by reuse (on-disk) 16-bit padding (linux2.i_pad1 currently used
only by "hurd") as high order bits for xattr.  This patch basically does that.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

JBD layer in-kernel block varibles type fixes to support >32 bit block number
and convert to sector_t type.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here is the patch to JBD to handle 64 bit block numbers, originally from Zach
Brown.  This patch is useful only after adding support for 64-bit block
numbers in the filesystem.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make it possible to add file preallocation support in future as an RO_COMPAT
feature by recognizing uninitialized extents as holes and limiting extent
length to keep the top bit of ee_len free for marking uninitialized extents.
Signed-off-by: NSuparna Bhattacharya <suparna@in.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlex Tomas <alex@clusterfs.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Redefine ext3 in-kernel filesystem block type (ext3_fsblk_t) from unsigned
long to sector_t, to allow kernel to handle  >32 bit ext3 blocks.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On disk extents format:
/*
* this is extent on-disk structure
* it's used at the bottom of the tree
*/
struct ext3_extent {
__le32  ee_block;       /* first logical block extent covers */
__le16  ee_len;         /* number of blocks covered by extent */
__le16  ee_start_hi;    /* high 16 bits of physical block */
__le32  ee_start;       /* low 32 bigs of physical block */
};
Signed-off-by: NAlex Tomas <alex@clusterfs.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

To allow ext4 to build during the transition from jbd to jbd2, we have both
ext4_jbd.h and ext4_jbd2.h in the tree.  We no longer need the former.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reworked from a patch by Mingming Cao and Randy Dunlap
Signed-off-By: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

jbd and jbd2 currently use the same slab names which must be unique.  The
patch below just renames jbd2's slabs.
Signed-off-by: NJohann Lombardi <johann.lombardi@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a simple copy of the files in fs/jbd to fs/jbd2 and
/usr/incude/linux/[ext4_]jbd.h to /usr/include/[ext4_]jbd2.h
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Originally part of a patch from Mingming Cao and Randy Dunlap.  Reorganized
by Shaggy.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Start of the ext4 patch series.  See Documentation/filesystems/ext4.txt for
details.

This is a simple copy of the files in fs/ext3 to fs/ext4 and
/usr/incude/linux/ext3* to /usr/include/ex4*
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

commit fe1668ae causes kernel to oops with
libhugetlbfs test suite.  The problem is that hugetlb pages can be shared
by multiple mappings.  Multiple threads can fight over page->lru in the
unmap path and bad things happen.  We now serialize __unmap_hugepage_range
to void concurrent linked list manipulation.  Such serialization is also
needed for shared page table page on hugetlb area.  This patch will fixed
the bug and also serve as a prepatch for shared page table.
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add suspend_console() and resume_console() to the suspend-to-disk code paths
so that the users of netconsole can use swsusp with it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We got several false bug reports because of enabled
CONFIG_DETECT_SOFTLOCKUP.  Disable soft lockup detection on s390, since it
doesn't work on a virtualized architecture.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

hw_interrupt_type is deprecated in favour of struct irq_chip.

[mingo@elte.hu: do x86_64 too]
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

scripts/kconfig/lxdialog/util.c fails to build because it uses
true/false without including stdbool.h:

kronos:~/src/linux-2.6$ make O=../linux-build-git menuconfig
  GEN     /home/kronos/src/linux-build/Makefile
  HOSTCC  scripts/kconfig/lxdialog/util.o
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_classic_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: 'true' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: (Each undeclared identifier is reported only once
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: for each function it appears in.)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:70: error: 'false' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_blackbg_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:101: error: 'true' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:102: error: 'false' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_bluetitle_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:144: error: 'true' undeclared (first use in this function)
make[2]: *** [scripts/kconfig/lxdialog/util.o] Error 1
make[1]: *** [menuconfig] Error 2
make: *** [menuconfig] Error 2

Add <stdbool.h> to dialog.h to fix the breakage.
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

memmap_zone_idx() is not used anymore.  It was required by an earlier
version of
account-for-memmap-and-optionally-the-kernel-image-as-holes.patch but not
any more.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Arch-independent zone-sizing is using indices instead of symbolic names to
offset within an array related to zones (max_zone_pfns).  The unintended
impact is that ZONE_DMA and ZONE_NORMAL is initialised on powerpc instead
of ZONE_DMA and ZONE_HIGHMEM when CONFIG_HIGHMEM is set.  As a result, the
the machine fails to boot but will boot with CONFIG_HIGHMEM turned off.

The following patch properly initialises the max_zone_pfns[] array and uses
symbolic names instead of indices in each architecture using
arch-independent zone-sizing.  Two users have successfully booted their
powerpcs with it (one an ibook G4).  It has also been boot tested on x86,
x86_64, ppc64 and ia64.  Please merge for 2.6.19-rc2.

Credit to Benjamin Herrenschmidt for identifying the bug and rolling the
first fix.  Additional credit to Johannes Berg and Andreas Schwab for
reporting the problem and testing on powerpc.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make the necessary changes to AVR32 required by the irq regs stuff.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since commit d1807793 we dereference a NULL
pointer.  Coverity id #1432.  We set journal to NULL, and use it directly
afterwards.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Olaf reports that this gave him a black screen.

Cc: Olaf Hering <olaf@aepfle.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is needed by at least the Mac Mini's, which (incorrectly) come back
from suspend with SCI_EN clear.

Thanks to Frdric Riss for hunting this down.
Acked-by: NFrdric Riss <frederic.riss@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>