- 30 10月, 2010 7 次提交
-
-
由 David Daney 提交于
The I2C and UARTS are clocked by the I/O clock, use its rate for these devices. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1670/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Starting with cn63xx Octeon I/O blocks are clocked at a different rate than the CPU. Add a new function octeon_get_io_clock_rate() that yields the I/O clock rate. Also rearrange octeon_get_clock_rate() to get the value from the saved sysinfo structure. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1671/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
We can run with any simulator clock rate. Get rid of the code overriding it to 6MHz. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1669/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The per-CPU clocks are synchronized from IPD_CLK_COUNT, on cn63XX it must be scaled by the clock frequency ratio. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1667/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The CN63XX has a different L2 cache architecture. Update the helper functions to reflect this. Some joining of split lines was also done to improve readability, as well as reformatting of comments. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1663/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
All Octeon chips can support more than 4GB of RAM. Also due to how Octeon PCI is setup, even some configurations with less than 4GB of RAM will have portions that are not accessible from 32-bit devices. Enable the swiotlb code to handle the cases where a device cannot directly do DMA. This is a complete rewrite of the Octeon DMA mapping code. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1639/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
This allows follow-on patches to dma mapping functions to work with the octeon mgmt device.. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1632/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 07 10月, 2010 1 次提交
-
-
由 David Howells 提交于
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NRalf Baechle <ralf@linux-mips.org>
-
- 05 10月, 2010 2 次提交
-
-
由 David Daney 提交于
It is an early_initcall, so it should be in __init memory. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1593/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andreas Bießmann 提交于
This patch adds an config switch to determine if we need to build some workaround helper files. The staging driver octeon-ethernet references some symbols which are only built when PCI is enabled. The new config switch enables these symbols in bothe cases. Signed-off-by: NAndreas Bießmann <biessmann@corscience.de> To: linux-kernel@vger.kernel.org Cc: Andreas Bießmann <biessmann@corscience.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1543/Acked-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 05 8月, 2010 13 次提交
-
-
由 David Daney 提交于
We reserve the 3.75GB - 4GB region of PCIe address space for device to device transfers, making the corresponding physical memory under direct mapping unavailable for DMA. To allow for PCIe DMA to all physical memory we map this chunk of physical memory with BAR1. Because of the resulting discontinuity in the mapping function, we remove a page of memory at each end of the range so multi-page DMA buffers can never be allocated that span the range. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1535/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The forthcoming watchdog driver will use it. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: wim@iguana.be Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1499/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Power throttling make deterministic delay loops impossible. Re-implement delays using the cycle counter. This also allows us to get rid of the code that calculates loops per jiffy. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1317/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
* Rename camel-case InitTLBStart_addr to octeon_bootloader_entry_addr. * Convert calls to cvmx_read64_uint32(), to simple pointer dereferences. * Set proper ebase. * Don't confuse coreid and cpu numbers. * Try to maintain consistent bootloader coremask. * Update the signature and boot_init_vector of supported bootloaders. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1491/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1490/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Also number offline CPUs that could potentially be brought on-line later. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1489/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The original version went behind the back of everything, leaving things in an inconsistent state. Now we use the irq_set_affinity() to do the work for us. This has the advantage that the IRQ core's view of the affinity stays consistent. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1486/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The main change is to change most of the IRQs from handle_percpu_irq to handle_fasteoi_irq. This necessitates extracting all the .ack code to common functions that are not exposed to the irq core. The affinity code now acts more sanely, by doing round-robin distribution instead of broadcasting. Because of the change to handle_fasteoi_irq and affinity, some of the IRQs had to be split into separate groups with their own struct irq_chip to prevent undefined operations on specific IRQ lines. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1485/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Put all the MSI code in one place (msi-octeon.c). This simplifies octeon-irq.c and gets rid of some ugly #ifdefs Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1484/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Christoph Egger 提交于
CONFIG_GDB_CONSOLE doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: NChristoph Egger <siccegge@cs.fau.de> To: David Daney <ddaney@caviumnetworks.com> To: Yang Shi <yang.shi@windriver.com> To: Herbert Xu <herbert@gondor.apana.org.au> To: Tejun Heo <tj@kernel.org> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Cc: vamos@i4.informatik.uni-erlangen.de Patchwork: https://patchwork.linux-mips.org/patch/1368/Acked-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/1504/
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
When building with a gcc-4.4.x toolchain that is configured to produce 32-bits executables by default, we will produce __lshrti3 in sched_clock() which is never resolved so the kernel fails to link. Unconditionally use the inline assembly version as suggested by David Daney, which works around the issue. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1514/Acked-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 22 5月, 2010 2 次提交
-
-
由 David Daney 提交于
For the simulator, fake a slow clock to get fast output. In prom_putchar we have to mask the value so the simulator doesn't ASSERT when printing non-ASCII characters. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1255/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Get rid of early_serial_setup, we use CONFIG_EARLY_PRINTK instead. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1254/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 13 4月, 2010 4 次提交
-
-
由 Yang Shi 提交于
octeon_reserve32_memory is defined In Octeon's setup.c, so remove the redundant extern declaration of this variable. Signed-off-by: NYang Shi <yang.shi@windriver.com> To: f.fainelli@gmail.com Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1022/Acked-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1029/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The config option CAVIUM_RESERVE32_USE_WIRED_TLB is not supported. Remove the dead code controlled by it. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1028/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 27 2月, 2010 11 次提交
-
-
由 Matt Turner 提交于
ALIGN(x, bytes) expands to __ALIGN_MASK(x, bytes - 1), so use the one that is most clear. Signed-off-by: NMatt Turner <mattst88@gmail.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/999/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/973/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/972/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/967/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> To: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/946/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Recent git versions now warn about those and they've always been a bit of an annoyance. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
If an interrupt handler disables interrupts, the EOI function will just reenable them. This will put us in an endless loop when the upcoming Ethernet driver patches are applied. Only reenable the interrupt on EOI if it is not IRQ_DISABLED. This requires that the EOI function be separate from the ENABLE function. We also rename the ACK functions to correspond with their function. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/840/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: Rade Bozic <rade.bozic.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/845/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: Rade Bozic <rade.bozic.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/847/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-