Fix up makefiles, remove references, and git rm kmemcheck.

Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.comSigned-off-by: NSasha Levin <alexander.levin@verizon.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that kmemcheck is gone, we don't need the NOTRACK flags.

Link: http://lkml.kernel.org/r/20171007030159.22241-5-alexander.levin@verizon.comSigned-off-by: NSasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert all allocations that used a NOTRACK flag to stop using it.

Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.comSigned-off-by: NSasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "kmemcheck: kill kmemcheck", v2.

As discussed at LSF/MM, kill kmemcheck.

KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow).  KASan is already upstream.

We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).

The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.

Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.

This patch (of 4):

Remove kmemcheck annotations, and calls to kmemcheck from the kernel.

[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
  Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.comSigned-off-by: NSasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Variable cend is set but never read, hence it is redundant and can be
removed.

Cleans up clang build warning: Value stored to 'cend' is never read

Link: http://lkml.kernel.org/r/20171011174942.1372-1-colin.king@canonical.com
Fixes: 369ea824 ("mm/rmap: update to new mmu_notifier semantic v2")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The allocations from filp cache can be directly triggered by userspace
applications.  A buggy application can consume a significant amount of
unaccounted system memory.  Though we have not noticed such buggy
applications in our production but upon close inspection, we found that
a lot of machines spend very significant amount of memory on these
caches.

One way to limit allocations from filp cache is to set system level
limit of maximum number of open files.  However this limit is shared
between different users on the system and one user can hog this
resource.  To cater that, we can charge filp to kmemcg and set the
maximum limit very high and let the memory limit of each user limit the
number of files they can open and indirectly limiting their allocations
from filp cache.

One side effect of this change is that it will allow _sysctl() to return
ENOMEM and the man page of _sysctl() does not specify that.  However the
man page also discourages to use _sysctl() at all.

Link: http://lkml.kernel.org/r/20171011190359.34926-1-shakeelb@google.comSigned-off-by: NShakeel Butt <shakeelb@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, we account page tables separately for each page table level,
but that's redundant -- we only make use of total memory allocated to
page tables for oom_badness calculation.  We also provide the
information to userspace, but it has dubious value there too.

This patch switches page table accounting to single counter.

mm->pgtables_bytes is now used to account all page table levels.  We use
bytes, because page table size for different levels of page table tree
may be different.

The change has user-visible effect: we don't have VmPMD and VmPUD
reported in /proc/[pid]/status.  Not sure if anybody uses them.  (As
alternative, we can always report 0 kB for them.)

OOM-killer report is also slightly changed: we now report pgtables_bytes
instead of nr_ptes, nr_pmd, nr_puds.

Apart from reducing number of counters per-mm, the benefit is that we
now calculate oom_badness() more correctly for machines which have
different size of page tables depending on level or where page tables
are less than a page in size.

The only downside can be debuggability because we do not know which page
table level could leak.  But I do not remember many bugs that would be
caught by separate counters so I wouldn't lose sleep over this.

[akpm@linux-foundation.org: fix mm/huge_memory.c]
Link: http://lkml.kernel.org/r/20171006100651.44742-2-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
[kirill.shutemov@linux.intel.com: fix build]
  Link: http://lkml.kernel.org/r/20171016150113.ikfxy3e7zzfvsr4w@black.fi.intel.comSigned-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let's add wrappers for ->nr_ptes with the same interface as for nr_pmd
and nr_pud.

The patch also makes nr_ptes accounting dependent onto CONFIG_MMU.  Page
table accounting doesn't make sense if you don't have page tables.

It's preparation for consolidation of page-table counters in mm_struct.

Link: http://lkml.kernel.org/r/20171006100651.44742-1-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On a machine with 5-level paging support a process can allocate
significant amount of memory and stay unnoticed by oom-killer and memory
cgroup.  The trick is to allocate a lot of PUD page tables.  We don't
account PUD page tables, only PMD and PTE.

We already addressed the same issue for PMD page tables, see commit
dc6c9a35 ("mm: account pmd page tables to the process").
Introduction of 5-level paging brings the same issue for PUD page
tables.

The patch expands accounting to PUD level.

[kirill.shutemov@linux.intel.com: s/pmd_t/pud_t/]
  Link: http://lkml.kernel.org/r/20171004074305.x35eh5u7ybbt5kar@black.fi.intel.com
[heiko.carstens@de.ibm.com: s390/mm: fix pud table accounting]
  Link: http://lkml.kernel.org/r/20171103090551.18231-1-heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20171002080427.3320-1-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kmemleak can be tweaked at runtime by writing commands into debugfs
file.  Root can use it anyway, but without the write-bit this interface
isn't obvious.

Link: http://lkml.kernel.org/r/150728996582.744328.11541332857988399411.stgit@buzzSigned-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

wdata_alloc_and_fillpages() needlessly iterates calls to
find_get_pages_tag().  Also it wants only pages from given range.  Make
it use find_get_pages_range_tag().

Link: http://lkml.kernel.org/r/20171009151359.31984-17-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Suggested-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use find_get_pages_range_tag() in afs_writepages_region() as we are
interested only in pages from given range.  Remove unnecessary code
after this conversion.

Link: http://lkml.kernel.org/r/20171009151359.31984-16-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All users of pagevec_lookup() and pagevec_lookup_range() now pass
PAGEVEC_SIZE as a desired number of pages.  Just drop the argument.

Link: http://lkml.kernel.org/r/20171009151359.31984-15-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use new function for looking up pages since nr_pages argument from
pagevec_lookup_range_tag() is going away.

Link: http://lkml.kernel.org/r/20171009151359.31984-14-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently pagevec_lookup_range_tag() takes number of pages to look up
but most users don't need this.  Create a new function
pagevec_lookup_range_nr_tag() that takes maximum number of pages to
lookup for Ceph which wants this functionality so that we can drop
nr_pages argument from pagevec_lookup_range_tag().

Link: http://lkml.kernel.org/r/20171009151359.31984-13-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use pagevec_lookup_range_tag() in write_cache_pages() as it is
interested only in pages from given range.  Remove unnecessary code
resulting from this.

Link: http://lkml.kernel.org/r/20171009151359.31984-12-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use pagevec_lookup_range_tag() in __filemap_fdatawait_range() as it is
interested only in pages from given range.  Remove unnecessary code
resulting from this.

Link: http://lkml.kernel.org/r/20171009151359.31984-11-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in nilfs_lookup_dirty_data_buffers().
Use pagevec_lookup_range_tag() instead of pagevec_lookup_tag() and
remove unnecessary code.

Link: http://lkml.kernel.org/r/20171009151359.31984-10-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in gfs2_write_cache_jdata().  Use
pagevec_lookup_range_tag() instead of pagevec_lookup_tag() and remove
unnecessary code.

Link: http://lkml.kernel.org/r/20171009151359.31984-9-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__get_first_dirty_index() wants to lookup only the first dirty page
after given index.  There's no point in using pagevec_lookup_tag() for
that.  Just use find_get_pages_tag() directly.

Link: http://lkml.kernel.org/r/20171009151359.31984-8-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In several places we want to iterate over all tagged pages in a mapping.
However the code was apparently copied from places that iterate only
over a limited range and thus it checks for index <= end, optimizes the
case where we are coming close to range end which is all pointless when
end == ULONG_MAX.  So just remove this dead code.

[akpm@linux-foundation.org: fix warnings]
Link: http://lkml.kernel.org/r/20171009151359.31984-7-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in f2fs_write_cache_pages().  Use
pagevec_lookup_range_tag() instead of pagevec_lookup_tag() and remove
unnecessary code.

Link: http://lkml.kernel.org/r/20171009151359.31984-6-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in ext4_writepages().  Use
pagevec_lookup_range_tag() instead of pagevec_lookup_tag() and remove
unnecessary code.

Link: http://lkml.kernel.org/r/20171009151359.31984-5-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in ceph_writepages_start().  Use
pagevec_lookup_range_tag() instead of pagevec_lookup_tag() and remove
unnecessary code.

Link: http://lkml.kernel.org/r/20171009151359.31984-4-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in btree_write_cache_pages() and
extent_write_cache_pages().  Use pagevec_lookup_range_tag() instead of
pagevec_lookup_tag() and remove unnecessary code.

Link: http://lkml.kernel.org/r/20171009151359.31984-3-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "Ranged pagevec tagged lookup", v3.

In this series I provide a ranged variant of pagevec_lookup_tag() and
use it in places where it makes sense.  This series removes some common
code and it also has a potential for speeding up some operations
similarly as for pagevec_lookup_range() (but for now I can think of only
artificial cases where this happens).

This patch (of 16):

Implement a variant of find_get_pages_tag() that stops iterating at
given index.  Lots of users of this function (through pagevec_lookup())
actually want a range lookup and all of them are currently open-coding
this.

Also create corresponding pagevec_lookup_range_tag() function.

Link: http://lkml.kernel.org/r/20171009151359.31984-2-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Steve French <sfrench@samba.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Maximum page order can be at max 10 which can be accomodated in short
data type(2 bytes).  last_migrate_reason is defined as enum type whose
values can be accomodated in short data type (2 bytes).

Total structure size is currently 16 bytes but after changing structure
size it goes to 12 bytes.

Vlastimil said:
 "Looks like it works, so why not.
  Before:
  [    0.001000] allocated 50331648 bytes of page_ext
  After:
  [    0.001000] allocated 41943040 bytes of page_ext"

Link: http://lkml.kernel.org/r/1507623917-37991-1-git-send-email-ayush.m@samsung.comSigned-off-by: NAyush Mittal <ayush.m@samsung.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It was observed that under cma_alloc fail log, pr_info was used instead
of pr_err.  This will lead to problems if printk debug level is set to
below 7.  In this case the cma_alloc failure log will not be captured in
the log and it will be difficult to debug.

Simply replace the pr_info with pr_err to capture failure log.

Link: http://lkml.kernel.org/r/1507650633-4430-1-git-send-email-pintu.ping@gmail.comSigned-off-by: NPintu Agarwal <pintu.ping@gmail.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

empty_bad_page() and empty_bad_pte_table() seem to be relics from old
days which is not used by any code for a long time.  I have tried to
find when exactly but this is not really all that straightforward due to
many code movements - traces disappear around 2.4 times.

Anyway no code really references neither empty_bad_page nor
empty_bad_pte_table.  We only allocate the storage which is not used by
anybody so remove them.

Link: http://lkml.kernel.org/r/20171004150045.30755-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NRalf Baechle <ralf@linus-mips.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory allocations can happen before the swap_slots cache initialization
is completed during cpu bring up.  If we are low on memory, we could
call get_swap_page() and access swap_slots_cache before it is fully
initialized.

Add a check in get_swap_page() for initialized swap_slots_cache to
prevent this condition.  Similar check already exists in free_swap_slot.
Also annotate the checks to indicate the likely condition.

We also added a memory barrier to make sure that the locks
initialization are done before the assignment of cache->slots and
cache->slots_ret pointers.  This ensures the assumption that it is safe
to acquire the slots cache locks and use the slots cache when the
corresponding cache->slots or cache->slots_ret pointers are non null.

[akpm@linux-foundation.org: tidy up comment]
[akpm@linux-foundation.org: fix spello in comment]
Link: http://lkml.kernel.org/r/65a9d0f133f63e66bba37b53b2fd0464b7cae771.1500677066.git.tim.c.chen@linux.intel.comSigned-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Reported-by: NWenwei Tao <wenwei.tww@alibaba-inc.com>
Acked-by: NYing Huang <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 59dc76b0 ("mm: vmscan: reduce size of inactive file
list") 'pgdat->inactive_ratio' is not used, except for printing
"node_inactive_ratio: 0" in /proc/zoneinfo output.

Remove it.

Link: http://lkml.kernel.org/r/20171003152611.27483-1-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is an optimization patch that only affect mmu_notifier users which
rely on the invalidate_range() callback.  This patch avoids calling that
callback twice in a row from inside __mmu_notifier_invalidate_range_end

Existing pattern (before this patch):
    mmu_notifier_invalidate_range_start()
        pte/pmd/pud_clear_flush_notify()
            mmu_notifier_invalidate_range()
    mmu_notifier_invalidate_range_end()
        mmu_notifier_invalidate_range()

New pattern (after this patch):
    mmu_notifier_invalidate_range_start()
        pte/pmd/pud_clear_flush_notify()
            mmu_notifier_invalidate_range()
    mmu_notifier_invalidate_range_only_end()

We call the invalidate_range callback after clearing the page table
under the page table lock and we skip the call to invalidate_range
inside the __mmu_notifier_invalidate_range_end() function.

Idea from Andrea Arcangeli

Link: http://lkml.kernel.org/r/20171017031003.7481-3-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch only affects users of mmu_notifier->invalidate_range callback
which are device drivers related to ATS/PASID, CAPI, IOMMUv2, SVM ...
and it is an optimization for those users.  Everyone else is unaffected
by it.

When clearing a pte/pmd we are given a choice to notify the event under
the page table lock (notify version of *_clear_flush helpers do call the
mmu_notifier_invalidate_range).  But that notification is not necessary
in all cases.

This patch removes almost all cases where it is useless to have a call
to mmu_notifier_invalidate_range before
mmu_notifier_invalidate_range_end.  It also adds documentation in all
those cases explaining why.

Below is a more in depth analysis of why this is fine to do this:

For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when
device use thing like ATS/PASID to get the IOMMU to walk the CPU page
table to access a process virtual address space).  There is only 2 cases
when you need to notify those secondary TLB while holding page table
lock when clearing a pte/pmd:

  A) page backing address is free before mmu_notifier_invalidate_range_end
  B) a page table entry is updated to point to a new page (COW, write fault
     on zero page, __replace_page(), ...)

Case A is obvious you do not want to take the risk for the device to write
to a page that might now be used by something completely different.

Case B is more subtle. For correctness it requires the following sequence
to happen:
  - take page table lock
  - clear page table entry and notify (pmd/pte_huge_clear_flush_notify())
  - set page table entry to point to new page

If clearing the page table entry is not followed by a notify before setting
the new pte/pmd value then you can break memory model like C11 or C++11 for
the device.

Consider the following scenario (device use a feature similar to ATS/
PASID):

Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we
assume they are write protected for COW (other case of B apply too).

[Time N] -----------------------------------------------------------------
CPU-thread-0  {try to write to addrA}
CPU-thread-1  {try to write to addrB}
CPU-thread-2  {}
CPU-thread-3  {}
DEV-thread-0  {read addrA and populate device TLB}
DEV-thread-2  {read addrB and populate device TLB}
[Time N+1] ---------------------------------------------------------------
CPU-thread-0  {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}}
CPU-thread-1  {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}}
CPU-thread-2  {}
CPU-thread-3  {}
DEV-thread-0  {}
DEV-thread-2  {}
[Time N+2] ---------------------------------------------------------------
CPU-thread-0  {COW_step1: {update page table point to new page for addrA}}
CPU-thread-1  {COW_step1: {update page table point to new page for addrB}}
CPU-thread-2  {}
CPU-thread-3  {}
DEV-thread-0  {}
DEV-thread-2  {}
[Time N+3] ---------------------------------------------------------------
CPU-thread-0  {preempted}
CPU-thread-1  {preempted}
CPU-thread-2  {write to addrA which is a write to new page}
CPU-thread-3  {}
DEV-thread-0  {}
DEV-thread-2  {}
[Time N+3] ---------------------------------------------------------------
CPU-thread-0  {preempted}
CPU-thread-1  {preempted}
CPU-thread-2  {}
CPU-thread-3  {write to addrB which is a write to new page}
DEV-thread-0  {}
DEV-thread-2  {}
[Time N+4] ---------------------------------------------------------------
CPU-thread-0  {preempted}
CPU-thread-1  {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}}
CPU-thread-2  {}
CPU-thread-3  {}
DEV-thread-0  {}
DEV-thread-2  {}
[Time N+5] ---------------------------------------------------------------
CPU-thread-0  {preempted}
CPU-thread-1  {}
CPU-thread-2  {}
CPU-thread-3  {}
DEV-thread-0  {read addrA from old page}
DEV-thread-2  {read addrB from new page}

So here because at time N+2 the clear page table entry was not pair with a
notification to invalidate the secondary TLB, the device see the new value
for addrB before seing the new value for addrA.  This break total memory
ordering for the device.

When changing a pte to write protect or to point to a new write protected
page with same content (KSM) it is ok to delay invalidate_range callback
to mmu_notifier_invalidate_range_end() outside the page table lock.  This
is true even if the thread doing page table update is preempted right
after releasing page table lock before calling
mmu_notifier_invalidate_range_end

Thanks to Andrea for thinking of a problematic scenario for COW.

[jglisse@redhat.com: v2]
  Link: http://lkml.kernel.org/r/20171017031003.7481-2-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20170901173011.10745-1-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use BUG_ON(in_interrupt()) in zs_map_object().  This is not a new
BUG_ON(), it's always been there, but was recently changed to
VM_BUG_ON().  There are several problems there.  First, we use use
per-CPU mappings both in zsmalloc and in zram, and interrupt may easily
corrupt those buffers.  Second, and more importantly, we believe it's
possible to start leaking sensitive information.  Consider the following
case:

-> process P
	swap out
	 zram
	  per-cpu mapping CPU1
	   compress page A
-> IRQ

	swap out
	 zram
	  per-cpu mapping CPU1
	   compress page B
	    write page from per-cpu mapping CPU1 to zsmalloc pool
	iret

-> process P
	    write page from per-cpu mapping CPU1 to zsmalloc pool  [*]
	return

* so we store overwritten data that actually belongs to another
  page (task) and potentially contains sensitive data. And when
  process P will page fault it's going to read (swap in) that
  other task's data.

Link: http://lkml.kernel.org/r/20170929045140.4055-1-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Constify pointer parameter to avoid issue when use from code that only
has const struct page pointer to use in the first place.

Link: http://lkml.kernel.org/r/1506972774-10191-1-git-send-email-jglisse@redhat.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no need to have a local return code set with -EINVAL when both
the conditions following it return error codes appropriately.  Just
remove the redundant one.

Link: http://lkml.kernel.org/r/20170929145444.17611-1-khandual@linux.vnet.ibm.comSigned-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ZSTD tends to outperform deflate/inflate, thus we remove zlib from the
list of recommended algorithms and recommend zstd instead.

Link: http://lkml.kernel.org/r/20170912050005.3247-2-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add ZSTD to the list of supported compression algorithms.

ZRAM fio perf test:

                      LZO         DEFLATE         ZSTD

#jobs1
WRITE:              (2180MB/s)   (77.2MB/s)      (1429MB/s)
WRITE:              (1617MB/s)   (77.7MB/s)      (1202MB/s)
READ:                (426MB/s)   (595MB/s)       (1181MB/s)
READ:                (422MB/s)   (572MB/s)       (1020MB/s)
READ:                (318MB/s)   (67.8MB/s)      (563MB/s)
WRITE:               (318MB/s)   (67.9MB/s)      (564MB/s)
READ:                (336MB/s)   (68.3MB/s)      (583MB/s)
WRITE:               (335MB/s)   (68.2MB/s)      (582MB/s)
#jobs2
WRITE:              (3441MB/s)   (152MB/s)       (2141MB/s)
WRITE:              (2507MB/s)   (147MB/s)       (1888MB/s)
READ:                (801MB/s)   (1146MB/s)      (1890MB/s)
READ:                (767MB/s)   (1096MB/s)      (2073MB/s)
READ:                (621MB/s)   (126MB/s)       (1009MB/s)
WRITE:               (621MB/s)   (126MB/s)       (1009MB/s)
READ:                (656MB/s)   (125MB/s)       (1075MB/s)
WRITE:               (657MB/s)   (126MB/s)       (1077MB/s)
#jobs3
WRITE:              (4772MB/s)   (225MB/s)       (3394MB/s)
WRITE:              (3905MB/s)   (211MB/s)       (2939MB/s)
READ:               (1216MB/s)   (1608MB/s)      (3218MB/s)
READ:               (1159MB/s)   (1431MB/s)      (2981MB/s)
READ:                (906MB/s)   (156MB/s)       (1457MB/s)
WRITE:               (907MB/s)   (156MB/s)       (1458MB/s)
READ:                (953MB/s)   (158MB/s)       (1595MB/s)
WRITE:               (952MB/s)   (157MB/s)       (1593MB/s)
#jobs4
WRITE:              (6036MB/s)   (265MB/s)       (4469MB/s)
WRITE:              (5059MB/s)   (263MB/s)       (3951MB/s)
READ:               (1618MB/s)   (2066MB/s)      (4276MB/s)
READ:               (1573MB/s)   (1942MB/s)      (3830MB/s)
READ:               (1202MB/s)   (227MB/s)       (1971MB/s)
WRITE:              (1200MB/s)   (227MB/s)       (1968MB/s)
READ:               (1265MB/s)   (226MB/s)       (2116MB/s)
WRITE:              (1264MB/s)   (226MB/s)       (2114MB/s)
#jobs5
WRITE:              (5339MB/s)   (233MB/s)       (3781MB/s)
WRITE:              (4298MB/s)   (234MB/s)       (3276MB/s)
READ:               (1626MB/s)   (2048MB/s)      (4081MB/s)
READ:               (1567MB/s)   (1929MB/s)      (3758MB/s)
READ:               (1174MB/s)   (205MB/s)       (1747MB/s)
WRITE:              (1173MB/s)   (204MB/s)       (1746MB/s)
READ:               (1214MB/s)   (208MB/s)       (1890MB/s)
WRITE:              (1215MB/s)   (208MB/s)       (1892MB/s)
#jobs6
WRITE:              (5666MB/s)   (270MB/s)       (4338MB/s)
WRITE:              (4828MB/s)   (267MB/s)       (3772MB/s)
READ:               (1803MB/s)   (2058MB/s)      (4946MB/s)
READ:               (1805MB/s)   (2156MB/s)      (4711MB/s)
READ:               (1334MB/s)   (235MB/s)       (2135MB/s)
WRITE:              (1335MB/s)   (235MB/s)       (2137MB/s)
READ:               (1364MB/s)   (236MB/s)       (2268MB/s)
WRITE:              (1365MB/s)   (237MB/s)       (2270MB/s)
#jobs7
WRITE:              (5474MB/s)   (270MB/s)       (4300MB/s)
WRITE:              (4666MB/s)   (266MB/s)       (3817MB/s)
READ:               (2022MB/s)   (2319MB/s)      (5472MB/s)
READ:               (1924MB/s)   (2260MB/s)      (5031MB/s)
READ:               (1369MB/s)   (242MB/s)       (2153MB/s)
WRITE:              (1370MB/s)   (242MB/s)       (2155MB/s)
READ:               (1499MB/s)   (246MB/s)       (2310MB/s)
WRITE:              (1497MB/s)   (246MB/s)       (2307MB/s)
#jobs8
WRITE:              (5558MB/s)   (273MB/s)       (4439MB/s)
WRITE:              (4763MB/s)   (271MB/s)       (3918MB/s)
READ:               (2201MB/s)   (2599MB/s)      (6062MB/s)
READ:               (2105MB/s)   (2463MB/s)      (5413MB/s)
READ:               (1490MB/s)   (252MB/s)       (2238MB/s)
WRITE:              (1488MB/s)   (252MB/s)       (2236MB/s)
READ:               (1566MB/s)   (254MB/s)       (2434MB/s)
WRITE:              (1568MB/s)   (254MB/s)       (2437MB/s)
#jobs9
WRITE:              (5120MB/s)   (264MB/s)       (4035MB/s)
WRITE:              (4531MB/s)   (267MB/s)       (3740MB/s)
READ:               (1940MB/s)   (2258MB/s)      (4986MB/s)
READ:               (2024MB/s)   (2387MB/s)      (4871MB/s)
READ:               (1343MB/s)   (246MB/s)       (2038MB/s)
WRITE:              (1342MB/s)   (246MB/s)       (2037MB/s)
READ:               (1553MB/s)   (238MB/s)       (2243MB/s)
WRITE:              (1552MB/s)   (238MB/s)       (2242MB/s)
#jobs10
WRITE:              (5345MB/s)   (271MB/s)       (3988MB/s)
WRITE:              (4750MB/s)   (254MB/s)       (3668MB/s)
READ:               (1876MB/s)   (2363MB/s)      (5150MB/s)
READ:               (1990MB/s)   (2256MB/s)      (5080MB/s)
READ:               (1355MB/s)   (250MB/s)       (2019MB/s)
WRITE:              (1356MB/s)   (251MB/s)       (2020MB/s)
READ:               (1490MB/s)   (252MB/s)       (2202MB/s)
WRITE:              (1488MB/s)   (252MB/s)       (2199MB/s)

jobs1                              perfstat
instructions                 52,065,555,710 (    0.79)    855,731,114,587 (    2.64)       54,280,709,944 (    1.40)
branches                     14,020,427,116 ( 725.847)    101,733,449,582 (1074.521)       11,170,591,067 ( 992.869)
branch-misses                    22,626,174 (   0.16%)        274,197,885 (   0.27%)           25,915,805 (   0.23%)
jobs2                              perfstat
instructions                103,633,110,402 (    0.75)  1,710,822,100,914 (    2.59)      107,879,874,104 (    1.28)
branches                     27,931,237,282 ( 679.203)    203,298,267,479 (1037.326)       22,185,350,842 ( 884.427)
branch-misses                    46,103,811 (   0.17%)        533,747,204 (   0.26%)           49,682,483 (   0.22%)
jobs3                              perfstat
instructions                154,857,283,657 (    0.76)  2,565,748,974,197 (    2.57)      161,515,435,813 (    1.31)
branches                     41,759,490,355 ( 670.529)    304,905,605,277 ( 978.765)       33,215,805,907 ( 888.003)
branch-misses                    74,263,293 (   0.18%)        759,746,240 (   0.25%)           76,841,196 (   0.23%)
jobs4                              perfstat
instructions                206,215,849,076 (    0.75)  3,420,169,460,897 (    2.60)      215,003,061,664 (    1.31)
branches                     55,632,141,739 ( 666.501)    406,394,977,433 ( 927.241)       44,214,322,251 ( 883.532)
branch-misses                   102,287,788 (   0.18%)      1,098,617,314 (   0.27%)          103,891,040 (   0.23%)
jobs5                              perfstat
instructions                258,711,315,588 (    0.67)  4,275,657,533,244 (    2.23)      269,332,235,685 (    1.08)
branches                     69,802,821,166 ( 588.823)    507,996,211,252 ( 797.036)       55,450,846,129 ( 735.095)
branch-misses                   129,217,214 (   0.19%)      1,243,284,991 (   0.24%)          173,512,278 (   0.31%)
jobs6                              perfstat
instructions                312,796,166,008 (    0.61)  5,133,896,344,660 (    2.02)      323,658,769,588 (    1.04)
branches                     84,372,488,583 ( 520.541)    610,310,494,402 ( 697.642)       66,683,292,992 ( 693.939)
branch-misses                   159,438,978 (   0.19%)      1,396,368,563 (   0.23%)          174,406,934 (   0.26%)
jobs7                              perfstat
instructions                363,211,372,930 (    0.56)  5,988,205,600,879 (    1.75)      377,824,674,156 (    0.93)
branches                     98,057,013,765 ( 463.117)    711,841,255,974 ( 598.762)       77,879,009,954 ( 600.443)
branch-misses                   199,513,153 (   0.20%)      1,507,651,077 (   0.21%)          248,203,369 (   0.32%)
jobs8                              perfstat
instructions                413,960,354,615 (    0.52)  6,842,918,558,378 (    1.45)      431,938,486,581 (    0.83)
branches                    111,812,574,884 ( 414.224)    813,299,084,518 ( 491.173)       89,062,699,827 ( 517.795)
branch-misses                   233,584,845 (   0.21%)      1,531,593,921 (   0.19%)          286,818,489 (   0.32%)
jobs9                              perfstat
instructions                465,976,220,300 (    0.53)  7,698,467,237,372 (    1.47)      486,352,600,321 (    0.84)
branches                    125,931,456,162 ( 424.063)    915,207,005,715 ( 498.192)      100,370,404,090 ( 517.439)
branch-misses                   256,992,445 (   0.20%)      1,782,809,816 (   0.19%)          345,239,380 (   0.34%)
jobs10                             perfstat
instructions                517,406,372,715 (    0.53)  8,553,527,312,900 (    1.48)      540,732,653,094 (    0.84)
branches                    139,839,780,676 ( 427.732)  1,016,737,699,389 ( 503.172)      111,696,557,638 ( 516.750)
branch-misses                   259,595,561 (   0.19%)      1,952,570,279 (   0.19%)          357,818,661 (   0.32%)

seconds elapsed        20.630411534     96.084546565    12.743373571
seconds elapsed        22.292627625     100.984155001   14.407413560
seconds elapsed        22.396016966     110.344880848   14.032201392
seconds elapsed        22.517330949     113.351459170   14.243074935
seconds elapsed        28.548305104     156.515193765   19.159286861
seconds elapsed        30.453538116     164.559937678   19.362492717
seconds elapsed        33.467108086     188.486827481   21.492612173
seconds elapsed        35.617727591     209.602677783   23.256422492
seconds elapsed        42.584239509     243.959902566   28.458540338
seconds elapsed        47.683632526     269.635248851   31.542404137

Over all, ZSTD has slower WRITE, but much faster READ (perhaps
a static compression buffer used during the test helped ZSTD a
lot), which results in faster test results.

Memory consumption (zram mm_stat file):

zram LZO mm_stat
mm_stat (jobs1): 2147483648 23068672 33558528        0 33558528        0        0
mm_stat (jobs2): 2147483648 23068672 33558528        0 33558528        0        0
mm_stat (jobs3): 2147483648 23068672 33558528        0 33562624        0        0
mm_stat (jobs4): 2147483648 23068672 33558528        0 33558528        0        0
mm_stat (jobs5): 2147483648 23068672 33558528        0 33558528        0        0
mm_stat (jobs6): 2147483648 23068672 33558528        0 33562624        0        0
mm_stat (jobs7): 2147483648 23068672 33558528        0 33566720        0        0
mm_stat (jobs8): 2147483648 23068672 33558528        0 33558528        0        0
mm_stat (jobs9): 2147483648 23068672 33558528        0 33558528        0        0
mm_stat (jobs10): 2147483648 23068672 33558528        0 33562624        0        0

zram DEFLATE mm_stat
mm_stat (jobs1): 2147483648 16252928 25178112        0 25178112        0        0
mm_stat (jobs2): 2147483648 16252928 25178112        0 25178112        0        0
mm_stat (jobs3): 2147483648 16252928 25178112        0 25178112        0        0
mm_stat (jobs4): 2147483648 16252928 25178112        0 25178112        0        0
mm_stat (jobs5): 2147483648 16252928 25178112        0 25178112        0        0
mm_stat (jobs6): 2147483648 16252928 25178112        0 25178112        0        0
mm_stat (jobs7): 2147483648 16252928 25178112        0 25190400        0        0
mm_stat (jobs8): 2147483648 16252928 25178112        0 25190400        0        0
mm_stat (jobs9): 2147483648 16252928 25178112        0 25178112        0        0
mm_stat (jobs10): 2147483648 16252928 25178112        0 25178112        0        0

zram ZSTD mm_stat
mm_stat (jobs1): 2147483648 11010048 16781312        0 16781312        0        0
mm_stat (jobs2): 2147483648 11010048 16781312        0 16781312        0        0
mm_stat (jobs3): 2147483648 11010048 16781312        0 16785408        0        0
mm_stat (jobs4): 2147483648 11010048 16781312        0 16781312        0        0
mm_stat (jobs5): 2147483648 11010048 16781312        0 16781312        0        0
mm_stat (jobs6): 2147483648 11010048 16781312        0 16781312        0        0
mm_stat (jobs7): 2147483648 11010048 16781312        0 16781312        0        0
mm_stat (jobs8): 2147483648 11010048 16781312        0 16781312        0        0
mm_stat (jobs9): 2147483648 11010048 16781312        0 16785408        0        0
mm_stat (jobs10): 2147483648 11010048 16781312        0 16781312        0        0

==================================================================================

Official benchmarks [1]:

Compressor name         Ratio   Compression     Decompress.
zstd 1.1.3 -1           2.877   430 MB/s        1110 MB/s
zlib 1.2.8 -1           2.743   110 MB/s        400 MB/s
brotli 0.5.2 -0         2.708   400 MB/s        430 MB/s
quicklz 1.5.0 -1        2.238   550 MB/s        710 MB/s
lzo1x 2.09 -1           2.108   650 MB/s        830 MB/s
lz4 1.7.5               2.101   720 MB/s        3600 MB/s
snappy 1.1.3            2.091   500 MB/s        1650 MB/s
lzf 3.6 -1              2.077   400 MB/s        860 MB/s

Minchan said:

: I did test with my sample data and compared zstd with deflate.  zstd's
: compress ratio is lower a little bit but compression speed is much faster
: 3 times more and decompress speed is too 2 times more.  With different
: data, it is different but overall, zstd would be better for speed at the
: cost of a little lower compress ratio(about 5%) so I believe it's worth to
: replace deflate.

[1] https://github.com/facebook/zstd

Link: http://lkml.kernel.org/r/20170912050005.3247-1-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Tested-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The vm direct limit setting must be set greater than vm background limit
setting.  Otherwise print a warning to help the operator to figure out
that the vm dirtiness settings is in illogical state.

Link: http://lkml.kernel.org/r/1506592464-30962-1-git-send-email-laoar.shao@gmail.comSigned-off-by: NYafang Shao <laoar.shao@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

for_each_memblock_type macro function relies on idx variable defined in
the caller context.  Silent macro arguments are almost always wrong
thing to do.  They make code harder to read and easier to get wrong.
Let's use an explicit iterator parameter for for_each_memblock_type and
make the code more obious.  This patch is a mere cleanup and it
shouldn't introduce any functional change.

Link: http://lkml.kernel.org/r/20170913133029.28911-1-gi-oh.kim@profitbricks.comSigned-off-by: NGioh Kim <gi-oh.kim@profitbricks.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>