Current Intel SOC cores use a MailBox Interface (MBI) to provide access to
configuration registers on devices (called units) connected to the system
fabric. This is a support driver that implements access to this interface on
those platforms that can enumerate the device using PCI. Initial support is for
BayTrail, for which port definitons are provided. This is a requirement for
implementing platform specific features (e.g. RAPL driver requires this to
perform platform specific power management using the registers in PUNIT).
Dependant modules should select IOSF_MBI in their respective Kconfig
configuraiton. Serialized access is handled by all exported routines with
spinlocks.

The API includes 3 functions for access to unit registers:

int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)

port:	indicating the unit being accessed
opcode:	the read or write port specific opcode
offset:	the register offset within the port
mdr:	the register data to be read, written, or modified
mask:	bit locations in mdr to change

Returns nonzero on error

Note: GPU code handles access to the GFX unit. Therefore access to that unit
with this driver is disallowed to avoid conflicts.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1389216471-734-1-git-send-email-david.e.box@linux.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>

Pull battery fixes from Anton Vorontsov:
 "Two fixes:

   - fix build error caused by max17042_battery conversion to the regmap
     API.

   - fix kernel oops when booting with wakeup_source_activate enabled"

* tag 'for-v3.13-fixes' of git://git.infradead.org/battery-2.6:
  max17042_battery: Fix build errors caused by missing REGMAP_I2C config
  power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate

Pull ACPI and PM fixes and new device IDs from Rafael Wysocki:
 "These commits, except for one, are regression fixes and the remaining
  one fixes a divide error leading to a kernel panic.  The majority of
  the regressions fixed here were introduced during the 3.12 cycle, one
  of them is from this cycle and one is older.

  Specifics:

   - VGA switcheroo was broken for some users as a result of the
     ACPI-based PCI hotplug (ACPIPHP) changes in 3.12, because some
     previously ignored hotplug events started to be handled.  The fix
     causes them to be ignored again.

   - There are two more issues related to cpufreq's suspend/resume
     handling changes from the 3.12 cycle addressed by Viresh Kumar's
     fixes.

   - intel_pstate triggers a divide error in a timer function if the
     P-state information it needs is missing during initialization.
     This leads to kernel panics on nested KVM clients and is fixed by
     failing the initialization cleanly in those cases.

   - PCI initalization code changes during the 3.9 cycle uncovered BIOS
     issues related to ACPI wakeup notifications (some BIOSes send them
     for devices that aren't supposed to support ACPI wakeup).  Work
     around them by installing an ACPI wakeup notify handler for all PCI
     devices with ACPI support.

   - The Calxeda cpuilde driver's probe function is tagged as __init,
     which is incorrect and causes a section mismatch to occur during
     build.  Fix from Andre Przywara removes the __init tag from there.

   - During the 3.12 cycle ACPIPHP started to print warnings about
     missing _ADR for devices that legitimately don't have it.  Fix from
     Toshi Kani makes it only print the warnings where they make sense"

* tag 'pm+acpi-3.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
  intel_pstate: Fail initialization if P-state information is missing
  ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function
  PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI
  cpufreq: preserve user_policy across suspend/resume
  cpufreq: Clean up after a failing light-weight initialization
  ACPI / PCI / hotplug: Avoid warning when _ADR not present

Pull kvm bugfixes from Marcelo Tosatti.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: Unconditionally uninit the MMU on nested vmexit
  KVM: x86: Fix APIC map calculation after re-enabling

Merge patches from Andrew Morton:
 "Ten fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL
  sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c
  drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()
  mm/memory-failure.c: transfer page count from head page to tail page after split thp
  MAINTAINERS: set up proper record for Xilinx Zynq
  mm: remove bogus warning in copy_huge_pmd()
  memcg: fix memcg_size() calculation
  mm: fix use-after-free in sys_remap_file_pages
  mm: munlock: fix deadlock in __munlock_pagevec()
  mm: munlock: fix a bug where THP tail page is encountered

The EPOLL_CTL_DEL path of epoll contains a classic, ab-ba deadlock.
That is, epoll_ctl(a, EPOLL_CTL_DEL, b, x), will deadlock with
epoll_ctl(b, EPOLL_CTL_DEL, a, x).  The deadlock was introduced with
commmit 67347fe4 ("epoll: do not take global 'epmutex' for simple
topologies").

The acquistion of the ep->mtx for the destination 'ep' was added such
that a concurrent EPOLL_CTL_ADD operation would see the correct state of
the ep (Specifically, the check for '!list_empty(&f.file->f_ep_links')

However, by simply not acquiring the lock, we do not serialize behind
the ep->mtx from the add path, and thus may perform a full path check
when if we had waited a little longer it may not have been necessary.
However, this is a transient state, and performing the full loop
checking in this case is not harmful.

The important point is that we wouldn't miss doing the full loop
checking when required, since EPOLL_CTL_ADD always locks any 'ep's that
its operating upon.  The reason we don't need to do lock ordering in the
add path, is that we are already are holding the global 'epmutex'
whenever we do the double lock.  Further, the original posting of this
patch, which was tested for the intended performance gains, did not
perform this additional locking.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Cc: Nathan Zimmer <nzimmer@sgi.com>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Nelson Elhage <nelhage@nelhage.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined
CONFIG_FLATMEM.  When the functions that use the pfn_valid is used in
driver module, max_low_pfn and min_low_pfn is to undefined, and fail to
build.

  ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
  ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
  make[2]: *** [__modpost] Error 1
  make[1]: *** [modules] Error 2

This patch fix this problem.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check DMA mapping return values in function ioat_dma_self_test() to get
rid of following warning message.

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0()
  ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single]
  Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio
  CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8
  Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013
  Call Trace:
    dump_stack+0x4d/0x66
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_fmt+0x4c/0x50
    check_unmap+0x4c0/0x9a0
    debug_dma_unmap_page+0x81/0x90
    ioat_dma_self_test+0x3d2/0x680 [ioatdma]
    ioat3_dma_self_test+0x12/0x30 [ioatdma]
    ioat_probe+0xf4/0x110 [ioatdma]
    ioat3_dma_probe+0x268/0x410 [ioatdma]
    ioat_pci_probe+0x122/0x1b0 [ioatdma]
    local_pci_probe+0x45/0xa0
    pci_device_probe+0xd9/0x130
    driver_probe_device+0x171/0x490
    __driver_attach+0x93/0xa0
    bus_for_each_dev+0x6b/0xb0
    driver_attach+0x1e/0x20
    bus_add_driver+0x1f8/0x2b0
    driver_register+0x81/0x110
    __pci_register_driver+0x60/0x70
    ioat_init_module+0x89/0x1000 [ioatdma]
    do_one_initcall+0xe2/0x250
    load_module+0x2313/0x2a00
    SyS_init_module+0xd9/0x130
    system_call_fastpath+0x1a/0x1f
  ---[ end trace 990c591681d27c31 ]---
  Mapped at:
    debug_dma_map_page+0xbe/0x180
    ioat_dma_self_test+0x1ab/0x680 [ioatdma]
    ioat3_dma_self_test+0x12/0x30 [ioatdma]
    ioat_probe+0xf4/0x110 [ioatdma]
    ioat3_dma_probe+0x268/0x410 [ioatdma]
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory failures on thp tail pages cause kernel panic like below:

   mce: [Hardware Error]: Machine check events logged
   MCE exception done on CPU 7
   BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
   IP: [<ffffffff811b7cd1>] dequeue_hwpoisoned_huge_page+0x131/0x1e0
   PGD bae42067 PUD ba47d067 PMD 0
   Oops: 0000 [#1] SMP
  ...
   CPU: 7 PID: 128 Comm: kworker/7:2 Tainted: G   M       O 3.13.0-rc4-131217-1558-00003-g83b7df08e462 #25
  ...
   Call Trace:
     me_huge_page+0x3e/0x50
     memory_failure+0x4bb/0xc20
     mce_process_work+0x3e/0x70
     process_one_work+0x171/0x420
     worker_thread+0x11b/0x3a0
     ? manage_workers.isra.25+0x2b0/0x2b0
     kthread+0xe4/0x100
     ? kthread_create_on_node+0x190/0x190
     ret_from_fork+0x7c/0xb0
     ? kthread_create_on_node+0x190/0x190
  ...
   RIP   dequeue_hwpoisoned_huge_page+0x131/0x1e0
   CR2: 0000000000000058

The reasoning of this problem is shown below:
 - when we have a memory error on a thp tail page, the memory error
   handler grabs a refcount of the head page to keep the thp under us.
 - Before unmapping the error page from processes, we split the thp,
   where page refcounts of both of head/tail pages don't change.
 - Then we call try_to_unmap() over the error page (which was a tail
   page before). We didn't pin the error page to handle the memory error,
   this error page is freed and removed from LRU list.
 - We never have the error page on LRU list, so the first page state
   check returns "unknown page," then we move to the second check
   with the saved page flag.
 - The saved page flag have PG_tail set, so the second page state check
   returns "hugepage."
 - We call me_huge_page() for freed error page, then we hit the above panic.

The root cause is that we didn't move refcount from the head page to the
tail page after split thp.  So this patch suggests to do this.

This panic was introduced by commit 524fca1e ("HWPOISON: fix
misjudgement of page_action() for errors on mlocked pages").  Note that we
did have the same refcount problem before this commit, but it was just
ignored because we had only first page state check which returned "unknown
page." The commit changed the refcount problem from "doesn't work" to
"kernel panic."
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>	[3.9+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Setup correct zynq entry.
 - Add missing cadence_ttc_timer maintainership
 - Add zynq wildcard
 - Add xilinx wildcard
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sasha Levin reported the following warning being triggered

  WARNING: CPU: 28 PID: 35287 at mm/huge_memory.c:887 copy_huge_pmd+0x145/ 0x3a0()
  Call Trace:
    copy_huge_pmd+0x145/0x3a0
    copy_page_range+0x3f2/0x560
    dup_mmap+0x2c9/0x3d0
    dup_mm+0xad/0x150
    copy_process+0xa68/0x12e0
    do_fork+0x96/0x270
    SyS_clone+0x16/0x20
    stub_clone+0x69/0x90

This warning was introduced by "mm: numa: Avoid unnecessary disruption
of NUMA hinting during migration" for paranoia reasons but the warning
is bogus.  I was thinking of parallel races between NUMA hinting faults
and forks but this warning would also be triggered by a parallel reclaim
splitting a THP during a fork.  Remote the bogus warning.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The mem_cgroup structure contains nr_node_ids pointers to
mem_cgroup_per_node objects, not the objects themselves.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remap_file_pages calls mmap_region, which may merge the VMA with other
existing VMAs, and free "vma".  This can lead to a use-after-free bug.
Avoid the bug by remembering vm_flags before calling mmap_region, and
not trying to dereference vma later.
Signed-off-by: NRik van Riel <riel@redhat.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 7225522b ("mm: munlock: batch non-THP page isolation and
munlock+putback using pagevec" introduced __munlock_pagevec() to speed
up munlock by holding lru_lock over multiple isolated pages.  Pages that
fail to be isolated are put_page()d immediately, also within the lock.

This can lead to deadlock when __munlock_pagevec() becomes the holder of
the last page pin and put_page() leads to __page_cache_release() which
also locks lru_lock.  The deadlock has been observed by Sasha Levin
using trinity.

This patch avoids the deadlock by deferring put_page() operations until
lru_lock is released.  Another pagevec (which is also used by later
phases of the function is reused to gather the pages for put_page()
operation.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit ff6a6da6 ("mm: accelerate munlock() treatment of THP
pages") munlock skips tail pages of a munlocked THP page.  However, when
the head page already has PageMlocked unset, it will not skip the tail
pages.

Commit 7225522b ("mm: munlock: batch non-THP page isolation and
munlock+putback using pagevec") has added a PageTransHuge() check which
contains VM_BUG_ON(PageTail(page)).  Sasha Levin found this triggered
using trinity, on the first tail page of a THP page without PageMlocked
flag.

This patch fixes the issue by skipping tail pages also in the case when
PageMlocked flag is unset.  There is still a possibility of race with
THP page split between clearing PageMlocked and determining how many
pages to skip.  The race might result in former tail pages not being
skipped, which is however no longer a bug, as during the skip the
PageTail flags are cleared.

However this race also affects correctness of NR_MLOCK accounting, which
is to be fixed in a separate patch.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull GFS2 fixes from Steven Whitehouse:
 "Here is a set of small fixes for GFS2.  There is a fix to drop
  s_umount which is copied in from the core vfs, two patches relate to a
  hard to hit "use after free" and memory leak.  Two patches related to
  using DIO and buffered I/O on the same file to ensure correct
  operation in relation to glock state changes.  The final patch adds an
  RCU read lock to ensure correct locking on an error path"

* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Fix unsafe dereference in dump_holder()
  GFS2: Wait for async DIO in glock state changes
  GFS2: Fix incorrect invalidation for DIO/buffered I/O
  GFS2: Fix slab memory leak in gfs2_bufdata
  GFS2: Fix use-after-free race when calling gfs2_remove_from_ail
  GFS2: don't hold s_umount over blkdev_put

Pull s390 fixes from Martin Schwidefsky:
 "Two small bug fixes and a follow-up to the CONFIG_NR_CPUS change.

  A kernel compiled with CONFIG_NR_CPUS=256 will waste quite a bit of
  memory for the per-cpu arrays.  Under z/VM the maximum number of CPUs
  is 64, the code now limits the possible cpu mask to 64 if running
  under z/VM"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: obtain function handle in hotplug notifier
  s390/3270: fix allocation of tty3270_screen structure
  s390/smp: improve setup of possible cpu mask

Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway
in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is
most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if
one guest VCPU manipulates the page of another VCPU in L2, we may be
fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in
nested state. That can crash the host later on if nested_ept_get_cr3 is
invoked while L1 already left vmxon and nested.current_vmcs12 became
NULL therefore.

Cc: stable@kernel.org
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

GLOCK_BUG_ON() might call this function without RCU read lock. Make sure that
RCU read lock is held when using task_struct returned from pid_task().
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Pull radeon drm fixes from Dave Airlie:
 "Just piping a bunch of fixes from pre-xmas from Alex for radeon, all
  either fix bad hw setup issues or regressions"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Bump version for CIK DCE tiling fix
  drm/radeon: set correct number of banks for CIK chips in DCE
  drm/radeon: set correct pipe config for Hawaii in DCE
  drm/radeon: expose render backend mask to the userspace
  drm/radeon: fix render backend setup for SI and CIK
  drm/radeon: 0x9649 is SUMO2 not SUMO
  drm/radeon: fix UVD 256MB check

Pull crypto fix from Herbert Xu:
 "Fix a build error on ARM that was introduced in 3.13-rc1"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ixp4xx - Fix kernel compile error

Radeon fixes, Christmas eve edition.  Fix incorrect family for 0x9649
which lead to bogus rendering, tiling and RB fixes for SI and CIK,
and a UVD fix.

* 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Bump version for CIK DCE tiling fix
  drm/radeon: set correct number of banks for CIK chips in DCE
  drm/radeon: set correct pipe config for Hawaii in DCE
  drm/radeon: expose render backend mask to the userspace
  drm/radeon: fix render backend setup for SI and CIK
  drm/radeon: 0x9649 is SUMO2 not SUMO
  drm/radeon: fix UVD 256MB check

drivers/crypto/ixp4xx_crypto.c: In function 'ixp_module_init':
drivers/crypto/ixp4xx_crypto.c:1419:2: error: 'dev' undeclared (first use in this function)

Now builds. Not tested on real hw.
Signed-off-by: NKrzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

* pm-cpufreq:
  intel_pstate: Fail initialization if P-state information is missing
  cpufreq: preserve user_policy across suspend/resume
  cpufreq: Clean up after a failing light-weight initialization

* pm-cpuidle:
  ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function

Merge branch 'cpuidle/3.13-fixes' of git://git.linaro.org/people/daniel.lezcano/linux into pm-cpuidle

Pull ARM cpuidle fixes for v3.13 from Daniel Lezcano.

* 'cpuidle/3.13-fixes' of git://git.linaro.org/people/daniel.lezcano/linux:
  ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function

* acpi-pci-pm:
  PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI

* acpi-pci-hotplug:
  ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
  ACPI / PCI / hotplug: Avoid warning when _ADR not present

Pull input updates from Dmitry Torokhov:
 "A fix for a panic in gpio-keys driver when set up with absolute
  events, a fixup to the new zforce driver and a new keycode definition"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: allocate absinfo data when setting ABS capability
  Input: define KEY_WWAN for Wireless WAN
  Input: zforce - fix possible driver hang during suspend

Pull cifs fixes from Steve French:
 "A few small cifs fixes including two for stable, and fixing a
  regression introduced by the VFS change to file create"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: set FILE_CREATED
  cifs: We do not drop reference to tlink in CIFSCheckMFSymlink()
  Add missing end of line termination to some cifs messages

We need to make sure we allocate absinfo data when we are setting one of
EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this
event.
Rested-by: NPaul Cercueil <pcercuei@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made
during the 3.12 development cycle uncovered a problem with VGA
switcheroo that on some systems, when the device-specific method
(ATPX in the radeon case, _DSM in the nouveau case) is used to turn
off the discrete graphics, the BIOS generates ACPI hotplug events for
that device and those events cause ACPIPHP to attempt to remove the
device from the system (they are events for a device that was present
previously and is not present any more, so that's what should be done
according to the spec).  Then, the system stops functioning correctly.

Since the hotplug events in question were simply silently ignored
previously, the least intrusive way to address that problem is to
make ACPIPHP ignore them again.  For this purpose, introduce a new
ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug
events for PCI devices whose ACPI companions have that flag set.
Next, make the radeon and nouveau switcheroo detection code set the
no_hotplug flag for the discrete graphics' ACPI companion.

Fixes: bbd34fcd (ACPI / hotplug / PCI: Register all devices under the given bridge)
References: https://bugzilla.kernel.org/show_bug.cgi?id=61891
References: https://bugzilla.kernel.org/show_bug.cgi?id=64891Reported-and-tested-by: NMike Lothian <mike@fireburn.co.uk>
Reported-and-tested-by: <madcatx@atlas.cz>
Reported-and-tested-by: NJoaquín Aramendía <samsagax@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+

If pstate.current_pstate is 0 after the initial
intel_pstate_get_cpu_pstates(), this means that we were unable to
obtain any useful P-state information and there is no reason to
continue, so free memory and return an error in that case.

This fixes the following divide error occuring in a nested KVM
guest:

Intel P-state driver initializing.
Intel pstate controlling: cpu 0
cpufreq: __cpufreq_add_dev: ->get() failed
divide error: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-0.rc4.git5.1.fc21.x86_64 #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff88001ea20000 ti: ffff88001e9bc000 task.ti: ffff88001e9bc000
RIP: 0010:[<ffffffff815c551d>]  [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0
RSP: 0000:ffff88001ee03e18  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88001a454348 RCX: 0000000000006100
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88001ee03e38 R08: 0000000000000000 R09: 0000000000000000
R10: ffff88001ea20000 R11: 0000000000000000 R12: 00000c0a1ea20000
R13: 1ea200001ea20000 R14: ffffffff815c5400 R15: ffff88001a454348
FS:  0000000000000000(0000) GS:ffff88001ee00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000001c0c000 CR4: 00000000000006f0
Stack:
 fffffffb1a454390 ffffffff821a4500 ffff88001a454390 0000000000000100
 ffff88001ee03ea8 ffffffff81083e9a ffffffff81083e15 ffffffff82d5ed40
 ffffffff8258cc60 0000000000000000 ffffffff81ac39de 0000000000000000
Call Trace:
 <IRQ>
 [<ffffffff81083e9a>] call_timer_fn+0x8a/0x310
 [<ffffffff81083e15>] ? call_timer_fn+0x5/0x310
 [<ffffffff815c5400>] ? pid_param_set+0x130/0x130
 [<ffffffff81084354>] run_timer_softirq+0x234/0x380
 [<ffffffff8107aee4>] __do_softirq+0x104/0x430
 [<ffffffff8107b5fd>] irq_exit+0xcd/0xe0
 [<ffffffff81770645>] smp_apic_timer_interrupt+0x45/0x60
 [<ffffffff8176efb2>] apic_timer_interrupt+0x72/0x80
 <EOI>
 [<ffffffff810e15cd>] ? vprintk_emit+0x1dd/0x5e0
 [<ffffffff81757719>] printk+0x67/0x69
 [<ffffffff815c1493>] __cpufreq_add_dev.isra.13+0x883/0x8d0
 [<ffffffff815c14f0>] cpufreq_add_dev+0x10/0x20
 [<ffffffff814a14d1>] subsys_interface_register+0xb1/0xf0
 [<ffffffff815bf5cf>] cpufreq_register_driver+0x9f/0x210
 [<ffffffff81fb19af>] intel_pstate_init+0x27d/0x3be
 [<ffffffff81761e3e>] ? mutex_unlock+0xe/0x10
 [<ffffffff81fb1732>] ? cpufreq_gov_dbs_init+0x12/0x12
 [<ffffffff8100214a>] do_one_initcall+0xfa/0x1b0
 [<ffffffff8109dbf5>] ? parse_args+0x225/0x3f0
 [<ffffffff81f64193>] kernel_init_freeable+0x1fc/0x287
 [<ffffffff81f638d0>] ? do_early_param+0x88/0x88
 [<ffffffff8174b530>] ? rest_init+0x150/0x150
 [<ffffffff8174b53e>] kernel_init+0xe/0x130
 [<ffffffff8176e27c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8174b530>] ? rest_init+0x150/0x150
Code: c1 e0 05 48 63 bc 03 10 01 00 00 48 63 83 d0 00 00 00 48 63 d6 48 c1 e2 08 c1 e1 08 4c 63 c2 48 c1 e0 08 48 98 48 c1 e0 08 48 99 <49> f7 f8 48 98 48 0f af f8 48 c1 ff 08 29 f9 89 ca c1 fa 1f 89
RIP  [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0
 RSP <ffff88001ee03e18>
---[ end trace f166110ed22cc37a ]---
Kernel panic - not syncing: Fatal exception in interrupt
Reported-and-tested-by: NKashyap Chamarthy <kchamart@redhat.com>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>

Pull devicetree fixes from Rob Herring:
 - Fix 2 regressions found on PPC
 - Allow NULL ptr in unflatten_and_copy_device_tree
 - Update my email address

* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  MAINTAINERS: Update Rob Herring's email address
  of/irq: Fix device_node refcount in of_irq_parse_raw()
  of/Kconfig: Spelling s/one/once/
  Revert "of/address: Handle #address-cells > 2 specially"
  of: Fix NULL dereference in unflatten_and_copy()

Update arch.apic_base before triggering recalculate_apic_map. Otherwise
the recalculation will work against the previous state of the APIC and
will fail to build the correct map when an APIC is hardware-enabled
again.

This fixes a regression of 1e08ec4a.

Cc: stable@vger.kernel.org
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Pull powerpc fixes from Ben Herrenschmidt:
 "A bit more endian problems found during testing of 3.13 and a few
  other simple fixes and regressions fixes"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix alignment of secondary cpu spin vars
  powerpc: Align p_end
  powernv/eeh: Add buffer for P7IOC hub error data
  powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()
  powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian
  powerpc: Make unaligned accesses endian-safe for powerpc
  powerpc: Fix bad stack check in exception entry
  powerpc/512x: dts: disable MPC5125 usb module
  powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)

Pull networking fixes from David Miller:
 "Some holiday bug fixes for 3.13...  There is still one bug I'd like to
  get fixed before 3.13-final.

  The vlan code erroneously assignes the header ops of the underlying
  real device to the VLAN device above it when the real device can
  hardware offload VLAN handling.  That's completely bogus because
  header ops are tied to the device type, so they only expect to see a
  'dev' argument compatible with their ops.

  The fix is the have the VLAN code use a special set of header ops that
  does the pass-thru correctly, by calling the underlying real device's
  header ops but _also_ passing in the real device instead of the VLAN
  device.

  That fix is currently waiting some testing.

  Anyways, of note here:

   1) Fix bitmap edge case in radiotap, from Johannes Berg.

   2) Fix oops on driver unload in rtlwifi, from Larry Finger.

   3) Bonding doesn't do locking correctly during speed/duplex/link
      changes, from Ding Tianhong.

   4) Fix header parsing in GRE code, this bug has been around for a few
      releases.  From Timo Teräs.

   5) SIT tunnel driver MTU check needs to take GSO into account, from
      Eric Dumazet.

   6) Minor info leak in inet_diag, from Daniel Borkmann.

   7) Info leak in YAM hamradio driver, from Salva Peiró.

   8) Fix route expiration state handling in ipv6 routing code, from Li
      RongQing.

   9) DCCP probe module does not check request_module()'s return value,
      from Wang Weidong.

  10) cpsw driver passes NULL device names to request_irq(), from
      Mugunthan V N.

  11) Prevent a NULL splat in RDS binding code, from Sasha Levin.

  12) Fix 4G overflow test in tg3 driver, from Nithin Sujir.

  13) Cure use after free in arc_emac and fec driver's software
      timestamp handling, from Eric Dumazet.

  14) SIT driver can fail to release the route when
      iptunnel_handle_offloads() throws an error.  From Li RongQing.

  15) Several batman-adv fixes from Simon Wunderlich and Antonio
      Quartulli.

  16) Fix deadlock during TIPC socket release, from Ying Xue.

  17) Fix regression in ROSE protocol recvmsg() msg_name handling, from
      Florian Westphal.

  18) stmmac PTP support releases wrong spinlock, from Vince Bridgers"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
  stmmac: Fix incorrect spinlock release and PTP cap detection.
  phy: IRQ cannot be shared
  net: rose: restore old recvmsg behavior
  xen-netback: fix guest-receive-side array sizes
  fec: Do not assume that PHY reset is active low
  tipc: fix deadlock during socket release
  netfilter: nf_tables: fix wrong datatype in nft_validate_data_load()
  batman-adv: fix vlan header access
  batman-adv: clean nf state when removing protocol header
  batman-adv: fix alignment for batadv_tvlv_tt_change
  batman-adv: fix size of batadv_bla_claim_dst
  batman-adv: fix size of batadv_icmp_header
  batman-adv: fix header alignment by unrolling batadv_header
  batman-adv: fix alignment for batadv_coded_packet
  netfilter: nf_tables: fix oops when updating table with user chains
  netfilter: nf_tables: fix dumping with large number of sets
  ipv6: release dst properly in ipip6_tunnel_xmit
  netxen: Correct off-by-one errors in bounds checks
  net: Add some clarification to skb_tx_timestamp() comment.
  arc_emac: fix potential use after free
  ...

My Calxeda email address is going away.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Commit 23616132, "of/irq: Refactor interrupt-map parsing" changed
the refcount on the device_node causing an error in of_node_put():

ERROR: Bad of_node_put() on /pci@800000020000000
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-dirty #2
Call Trace:
[c00000003e403500] [c0000000000144fc] .show_stack+0x7c/0x1f0 (unreliable)
[c00000003e4035d0] [c00000000070f250] .dump_stack+0x88/0xb4
[c00000003e403650] [c0000000005e8768] .of_node_release+0xd8/0xf0
[c00000003e4036e0] [c0000000005eeafc] .of_irq_parse_one+0x10c/0x280
[c00000003e4037a0] [c0000000005efd4c] .of_irq_parse_pci+0x3c/0x1d0
[c00000003e403840] [c000000000038240] .pcibios_setup_device+0xa0/0x2e0
[c00000003e403910] [c0000000000398f0] .pcibios_setup_bus_devices+0x60/0xd0
[c00000003e403990] [c00000000003b3a4] .__of_scan_bus+0x1a4/0x2b0
[c00000003e403a80] [c00000000003a62c] .pcibios_scan_phb+0x30c/0x410
[c00000003e403b60] [c0000000009fe430] .pcibios_init+0x7c/0xd4

This patch adjusts the refcount in the walk of the interrupt tree.
When a match is found, there is no need to increase the refcount
on 'out_irq->np' as 'newpar' is already holding a ref. The refcount
balance between 'ipar' and 'newpar' is maintained in the skiplevel:
goto label.

This patch also removes the usage of the device_node variable 'old'
which seems useless after the latest changes.
Signed-off-by: NCédric Le Goater <clg@fr.ibm.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: NRob Herring <robh@kernel.org>