I wish the OSD code could simply use blk_rq_map_* helpers like
everyone else, but the complex nature of deciding if we have
DATA IN and/or DATA OUT buffers might make this impossible
(at least for a mere human like me).

But using blk_rq_append_bio at least allows sharing the setup code
between request with or without dat a buffers, and given that this
is the last user of blk_make_request it allows getting rid of that
somewhat awkward interface.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NBoaz Harrosh <ooo@electrozaur.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Using blk_rq_append_bio allows to append the bios to the request
directly instead of having to build up a list first, and also
allows to have a single code path for requests with or without
data attached to them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The target SCSI passthrough backend is much better served with the low-level
blk_rq_append_bio construct then the helpers built on top of it, so export it.

Also use the opportunity to remove the pointless request_queue argument and
make the code flow a little more readable.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_get_request is used for BLOCK_PC and similar passthrough requests.
Currently we always need to call blk_rq_set_block_pc or an open coded
version of it to allow appending bios using the request mapping helpers
later on, which is a somewhat awkward API.  Instead move the
initialization part of blk_rq_set_block_pc into blk_get_request, so that
we always have a safe to use request.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Similar to how SCSI and NVMe prepare passthrough requests.  This avoids
poking into request internals too much.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

There is no code to issue or handle REQ_TYPE_BLOCK_PC request in the
memstick drivers, so remove the bogus conditional.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The recent ops split grew the bio by adding the new ioprio field.
Shrink it again by using a 16-bit field for the bi_flags value and
filling the holes near the beginning of the structure.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of a flag and an index just make sure an index of 0 means
no need to free the bvec array.  Also move the constants related
to the bvec pools together and use a consistent naming scheme for
them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces.  For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense.  Any check for READA is replaced with an
explicit check for REQ_RAHEAD.  Also remove the READA alias for
REQ_RAHEAD.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

WRITE SAME is a data integrity operation and we can't simply ignore
errors.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently blkdev_issue_zeroout cascades down from discards (if the driver
guarantees that discards zero data), to WRITE SAME and then to a loop
writing zeroes.  Unfortunately we ignore run-time EOPNOTSUPP errors in the
block layer blkdev_issue_discard helper to work around DM volumes that
may have mixed discard support underneath.

This patch intoroduces a new BLKDEV_DISCARD_ZERO flag to
blkdev_issue_discard that indicates we are called for zeroing operation.
This allows both to ignore the EOPNOTSUPP hack and actually consolidating
the discard_zeroes_data check into the function.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

When alloc_disk(0) is used, the ->major number is ignored.  All device
numbers are allocated with a major of BLOCK_EXT_MAJOR.

So remove all references to nvme_major.

[akpm@linux-foundation.org: one unregister_blkdev() was missed]
Link: http://lkml.kernel.org/r/20160602064318.4403.93301.stgit@nobleSigned-off-by: NNeilBrown <neilb@suse.com>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

When CONFIG_NUMA is enabled and node 0 is memoryless, the system
crashes because nvme_probe() sets the device->numa_node to 0 by
set_dev_node(&pdev->dev, 0), so it tries to allocate memory from node 0.
To avoid the crash, we should change the 0 to first_memory_node.
Signed-off-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Many controller implementations will return errors to commands that will
not succeed, but without the DNR bit set. The driver previously retried
these commands an unlimited number of times until the command timeout
has exceeded, which takes an unnecessarilly long period of time.

This patch limits the number of retries a command can have, defaulting
to 5, but is user tunable at load or runtime.

The struct request's 'retries' field is used to track the number of
retries attempted. This is in contrast with scsi's use of this field,
which indicates how many retries are allowed.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

There is no error number returned if loop driver fails in function
alloc_disk to add new loop device. Add a correct error number to make
user notify in this case.
Signed-off-by: NMinfei Huang <mnghuan@gmail.com>
Reviewed-by: NMing Lei <tom.leiming@gmail.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

I ran into the same problem on NVME_TARGET_RDMA now,
which otherwise needs dependencies on both CONFIG_BLOCK and
CONFIGFS_FS:

    warning: (NVME_TARGET_LOOP && NVME_TARGET_RDMA) selects NVME_TARGET which has unmet direct dependencies (BLOCK && CONFIGFS_FS)
    0xA002B368 Mon Jul 11 18:00:45 CEST 2016 failed
    In file included from ../drivers/nvme/target/core.c:16:0:
    drivers/nvme/target/nvmet.h:222:14: error: field 'inline_bio' has incomplete type
      struct bio  inline_bio;
                  ^~~~~~~~~~
    drivers/nvme/target/core.c: In function 'nvmet_async_event_work':
    drivers/nvme/target/core.c:98:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
       kfree(aen);
       ^~~~~
    ../drivers/nvme/target/core.c: In function 'nvmet_ns_enable':
    ../drivers/nvme/target/core.c:269:13: error: implicit declaration of function 'blkdev_get_by_path' [-Werror=implicit-function-declaration]
      ns->bdev = blkdev_get_by_path(ns->device_path, FMODE_READ | FMODE_WRITE,

Folding in my patch below should address that too.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

In case of error, the function kstrndup() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Repeatedly adding then removing the same NVMe-over-Fabrics controller
over and over again (shown below) can cause a kernel crash (also shown
below).  This patch fixes that.

[nvmf]# ./setup_nvme_connections.sh
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside
-nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=lightside
-nqn,hostnqn=good-wins-nqn > /dev/nvme-fabrics
[nvmf]# ./remove_nvme_connections.sh 2
echo 1 > /sys/class/nvme/nvme0/delete_controller
echo 1 > /sys/class/nvme/nvme1/delete_controller
[nvmf]# ./setup_nvme_connections.sh
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside
-nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics
Killed

[nvmf]# dmesg
[  313.416908] nvme nvme0: creating 16 I/O queues.
[  313.523908] nvme nvme0: new ctrl: NQN "darkside-nqn", addr
192.168.1.100:4420
[  313.524857] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  313.525262] IP: [<ffffffff8136c60e>] strcmp+0xe/0x30
[  313.525490] PGD 0
[  313.525726] Oops: 0000 [#1] SMP
[  313.525900] Modules linked in: nvme_rdma nvme_fabrics nvme_core
ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_en
mlx4_ib ib_core mlx4_core
[  313.527085] CPU: 15 PID: 5856 Comm: setup_nvme_conn Not tainted
4.7.0-rc2+ #2
[  313.527259] Hardware name: Supermicro X9DRT-F/IBQF/IBFF/X9DRT
-F/IBQF/IBFF, BIOS 1.0a 10/09/2012
[  313.527551] task: ffff88027646cd40 ti: ffff88025b980000 task.ti:
ffff88025b980000
[  313.527879] RIP: 0010:[<ffffffff8136c60e>]  [<ffffffff8136c60e>]
strcmp+0xe/0x30
[  313.528232] RSP: 0018:ffff88025b983db0  EFLAGS: 00010206
[  313.528403] RAX: 0000000000000000 RBX: ffff880471879880 RCX:
fffffffffffffff1
[  313.528594] RDX: 0000000000000000 RSI: ffff880474afa860 RDI:
0000000000000011
[  313.528778] RBP: ffff88025b983db0 R08: ffff880474afa860 R09:
ffff880471879058
[  313.528956] R10: 000000000000002c R11: ffff88047f415000 R12:
ffff880471879800
[  313.529129] R13: ffff880471879000 R14: ffff880474afa860 R15:
fffffffffffffff8
[  313.529303] FS:  00007f778f510700(0000) GS:ffff88047fbc0000(0000)
knlGS:0000000000000000
[  313.529629] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  313.529817] CR2: 0000000000000010 CR3: 0000000274174000 CR4:
00000000000406e0
[  313.529989] Stack:
[  313.530154]  ffff88025b983e48 ffffffffa0171c74 0000000000000001
0000000000000059
[  313.530621]  ffff880476f32400 ffff88047e8add80 0000010074b33aa0
ffff880471879059
[  313.531162]  ffff88047187904b ffff880471879058 0000000000000000
ffff88047736e000
[  313.531629] Call Trace:
[  313.531797]  [<ffffffffa0171c74>] nvmf_dev_write+0x674/0x840
[nvme_fabrics]
[  313.531974]  [<ffffffff81180b53>] __vfs_write+0x23/0x120
[  313.532146]  [<ffffffff8119daff>] ? __fd_install+0x1f/0xc0
[  313.532316]  [<ffffffff8119d97a>] ? __alloc_fd+0x3a/0x170
[  313.532487]  [<ffffffff811811f3>] vfs_write+0xb3/0x1b0
[  313.532658]  [<ffffffff8117e321>] ? filp_close+0x51/0x70
[  313.532845]  [<ffffffff811824e1>] SyS_write+0x41/0xa0
[  313.533016]  [<ffffffff8183055b>]
entry_SYSCALL_64_fastpath+0x13/0x8f
[  313.533188] Code: 80 3a 00 75 f7 48 83 c6 01 0f b6 4e ff 48 83 c2 01
84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 83
c7 01 <0f> b6 47 ff 48 83 c6 01 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31
[  313.536563] RIP  [<ffffffff8136c60e>] strcmp+0xe/0x30
[  313.536815]  RSP <ffff88025b983db0>
[  313.536981] CR2: 0000000000000010
[  313.537151] ---[ end trace 3d952e590e7bc2d5 ]---
Reported-and-tested-by: NJay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: NMing Lin <mlin@kernel.org>
Signed-off-by: NJay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The timeout before error recovery logic kicks in is
dictated by the nvme keep-alive, so we don't really need
a transport layer retry count. transports can retry for
as much as they like.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

Always use the maximum qp retry count as the
error recovery timeout is dictated from the nvme
keep-alive.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

PTR_ERR should be applied before its argument is reassigned, otherwise the
return value will be set to 0, not error code.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

userspace application can send READ_SUB_CHANNEL command with time bit
enabled and disabled. The time bit allows selection of address reporting
format. If the time bit is disabled the response is in logical block
address(CDROM_LBA) format, represented as a 32-bit integer with ms-byte
first. If the time bit is enabled the response is in time format i.e.,
minutes, second, frame (CDROM_MSF) format.
Signed-off-by: Nvchannaiah <vanitha.channaiah@in.bosch.com>
Signed-off-by: NMahendran Kuppusamy <mahendran.kuppusamy@in.bosch.com>
[veeraiyan.chidambaram@in.bosch.com: updated Documentation/ioctl/cdrom.txt]
Signed-off-by: NVeeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

When disabling the controller, the specification says the register
NVME_REG_CC should be written and then driver needs to wait the
adapter to be ready, which is checked by reading another register
bit (NVME_CSTS_RDY). There's a timeout validation in this checking,
so in case this timeout is reached the driver gives up and removes
the adapter from the system.

After a firmware activation procedure, the PCI_DEVICE(0x1c58, 0x0003)
(HGST adapter) end up being removed if we issue a reset_controller,
because driver keeps verifying the NVME_REG_CSTS until the timeout is
reached. This patch adds a necessary quirk for this adapter, by
introducing a delay before nvme_wait_ready(), so the reset procedure
is able to be completed. This quirk is needed because just increasing
the timeout is not enough in case of this adapter - the driver must
wait before start reading NVME_REG_CSTS register on this specific
device.
Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Merge branch 'for-4.8/block' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm into for-4.8/drivers

Dan writes:

"The removal of ->driverfs_dev in favor of just passing the parent
device in as a parameter to add_disk().  See below, it has received a
"Reviewed-by" from Christoph, Bart, and Johannes.

It is also a pre-requisite for Fam Zheng's work to cleanup gendisk
uevents vs attribute visibility [1].  We would extend device_add_disk()
to take an attribute_group list.

This is based off a branch of block.git/for-4.8/drivers and has
received a positive build success notification from the kbuild robot
across several configs.

[1]: "gendisk: Generate uevent after attribute available"
http://marc.info/?l=linux-virtualization&m=146725201522201&w=2"

This patch implements the RDMA host (initiator in SCSI speak) driver.  It
can be used to connect to remote NVMe over Fabrics controllers over
Infiniband, RoCE or iWarp, and uses the existing NVMe core driver as well
a the new fabrics library.

To connect to all NVMe over Fabrics controller reachable on a given taget
port using RDMA/CM use the following command:

	nvme connect-all -t rdma -a $IPADDR

This requires the latest version of nvme-cli with Fabrics support.
Signed-off-by: NJay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch implements the RDMA transport for the NVMe over Fabrics target,
which allows exporting NVMe over Fabrics functionality over RDMA fabrics
(Infiniband, RoCE, iWARP).

All NVMe logic is in the generic target and this module just provides a
small glue between it and the generic code in the RDMA subsystem.

Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>,
Signed-off-by: NJay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

NVMe over Fabrics RDMA transport defines a connection establishment
protocol over the RDMA connection manager. This header will be used by
both the host and target drivers to negotiate the connection
establishment parameters.
Signed-off-by: NJay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The nvme fabric (RDMA, FC, etc...) can introduce port, link or node
failures that may require a reconnect to re-establish the connection.

Add a new reconnecting state that will initially be used by the RDMA
driver.
Reviewed-by: NJay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The new nvme-rdma driver will need to reinitialize all the tags as part of
the error recovery procedure (realloc the tag memory region). Add a helper
in blk-mq for it that can iterate over all requests in a tagset to make
this easier.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Tested-by: NMing Lin <ming.l@ssi.samsung.com>
Reviewed-by: NStephen Bates <Stephen.Bates@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The __nvm_submit_ppa() function is not used outside lightnvm core.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

The passed by reference ppa list in nvm_set_rqd_list() is updated when
multiple planes are available. In that case, each PPA plane is
incremented when the device side PPA list is created. This prevents the
caller to rely on the PPA list to be unmodified after a call.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

The gen_mark_blk_bad function marks the wrong block when a block is on
a different channel. Fix the index calculation, so that it updates the
correct block.
Reported-by: NJavier Gonzalez <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

The nvm_get_blk() function is called with rlun->lock held. This is ok
when the media manager implementation doesn't go out of its atomic
context. However, if a media manager persists its metadata, and
guarantees that the block is given to the target, this is no longer
a viable approach. Therefore, clean up the flow of rrpc_map_page,
and make sure that nvm_get_blk() is called without any locks acquired.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

The [get/put]_blk API enables targets to get ownership of blocks at
runtime. This information is currently not recorded on disk, and the
information is therefore lost on power failure. To restore the
metadata, the [get/put]_blk must persist its metadata. In that case,
we need to control the outer lock, so that we can disable them while
updating the on-disk metadata. Fortunately, the _unlocked versions can
be removed, which allows us to move the lock into the [get/put]_blk
functions.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

The ->list, ->open_list, and ->closed_list lists were previously used
for statistics. However, their usage have been removed, and thus these
can safely be removed.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

If a media manager tries to initialize it targets upon media manager
initialization, the media manager will need to know which target types
are available in LightNVM. The lists of which managers and target types
are available shares the same lock.

Therefore, on initialization, the nvm_lock is taken by LightNVM core,
which later leads to a deadlock when target types are enumerated by the
media manager.

Add an exclusive lock for target types to resolve this conflict.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

To enable persistent block management to easily control creation and
removal of targets, we move target management into the media
manager. The LightNVM core continues to maintain which target types are
registered, while the media manager now keeps track of its initialized
targets.

Two new callbacks for the media manager are introduced. create_tgt and
remove_tgt. Note that remove_tgt returns 0 on successfully removing a
target, and returns 1 if the target was not found.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

The generic manager should be called the general media manager, and
instead of using the rather long name of "gennvm" in front of each data
structures, use "gen" instead to shorten it. Update the description of
the media manager as well to make the media manager purpose clearer.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

The responsibility of the media manager is not to keep track of
open/closed blocks. This is better maintained within a target,
that already manages this information on writes.

Remove the statistics and merge the states NVM_BLK_ST_OPEN and
NVM_BLK_ST_CLOSED.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>

A couple of small checkpatch fixups to stop it from complaining.

./drivers/lightnvm/core.c:360: WARNING: line over 80 characters
./drivers/lightnvm/core.c:360: ERROR: trailing statements should be on
next line
./drivers/lightnvm/core.c:503: WARNING: Block comments use a trailing */
on a separate line
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>