We know that "ret > 0" is true here.  These tests were left over from
commit 02afc27f ('direct-io: Handle O_(D)SYNC AIO') and aren't
needed any more.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The return value of bio_get_nr_vecs() cannot be bigger than
BIO_MAX_PAGES, so we can remove redundant the comparison between
nr_pages and BIO_MAX_PAGES.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the following crash:

  kernel BUG at fs/ocfs2/uptodate.c:530!
  Modules linked in: ocfs2(F) ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bridge xen_pciback xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd sunrpc 8021q garp stp llc bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi iTCO_wdt iTCO_vendor_support dcdbas coretemp freq_table mperf microcode pcspkr serio_raw bnx2 lpc_ich mfd_core i5k_amb i5000_edac edac_core e1000e sg shpchp ext4(F) jbd2(F) mbcache(F) dm_round_robin(F) sr_mod(F) cdrom(F) usb_storage(F) sd_mod(F) crc_t10dif(F) pata_acpi(F) ata_generic(F) ata_piix(F) mptsas(F) mptscsih(F) mptbase(F) scsi_transport_sas(F) radeon(F)
   ttm(F) drm_kms_helper(F) drm(F) hwmon(F) i2c_algo_bit(F) i2c_core(F) dm_multipath(F) dm_mirror(F) dm_region_hash(F) dm_log(F) dm_mod(F)
  CPU 5
  Pid: 21303, comm: xattr-test Tainted: GF       W    3.8.13-30.el6uek.x86_64 #2 Dell Inc. PowerEdge 1950/0M788G
  RIP: ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]
  Process xattr-test (pid: 21303, threadinfo ffff880017aca000, task ffff880016a2c480)
  Call Trace:
    ocfs2_init_xattr_bucket+0x8a/0x120 [ocfs2]
    ocfs2_cp_xattr_bucket+0xbb/0x1b0 [ocfs2]
    ocfs2_extend_xattr_bucket+0x20a/0x2f0 [ocfs2]
    ocfs2_add_new_xattr_bucket+0x23e/0x4b0 [ocfs2]
    ocfs2_xattr_set_entry_index_block+0x13c/0x3d0 [ocfs2]
    ocfs2_xattr_block_set+0xf9/0x220 [ocfs2]
    __ocfs2_xattr_set_handle+0x118/0x710 [ocfs2]
    ocfs2_xattr_set+0x691/0x880 [ocfs2]
    ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
    generic_setxattr+0x96/0xa0
    __vfs_setxattr_noperm+0x7b/0x170
    vfs_setxattr+0xbc/0xc0
    setxattr+0xde/0x230
    sys_fsetxattr+0xc6/0xf0
    system_call_fastpath+0x16/0x1b
  Code: 41 80 0c 24 01 48 89 df e8 7d f0 ff ff 4c 89 e6 48 89 df e8 a2 fe ff ff 48 89 df e8 3a f0 ff ff 48 8b 1c 24 4c 8b 64 24 08 c9 c3 <0f> 0b eb fe 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 66 66
  RIP  ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]

It hit the BUG_ON() in ocfs2_set_new_buffer_uptodate():

    void ocfs2_set_new_buffer_uptodate(struct ocfs2_caching_info *ci,
                                       struct buffer_head *bh)
    {
          /* This should definitely *not* exist in our cache */
          if (ocfs2_buffer_cached(ci, bh))
                  printk(KERN_ERR "bh->b_blocknr: %lu @ %p\n", bh->b_blocknr, bh);
          BUG_ON(ocfs2_buffer_cached(ci, bh));

          set_buffer_uptodate(bh);

          ocfs2_metadata_cache_io_lock(ci);
          ocfs2_set_buffer_uptodate(ci, bh);
          ocfs2_metadata_cache_io_unlock(ci);
    }

The problem here is:

We cached a block, but the buffer_head got reused.  When we are to pick
up this block again, a new buffer_head created with UPTODATE flag
cleared.  ocfs2_buffer_uptodate() returned false since no UPTODATE is
set on the buffer_head.  so we set this block to cache as a NEW block,
then it failed at asserting block is not in cache.

The fix is to add a new parameter indicating the bucket is a new
allocated or not to ocfs2_init_xattr_bucket().
ocfs2_init_xattr_bucket() assert block not cached accordingly.
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following case may lead to the same system inode ref in confusion.

A thread                            B thread
ocfs2_get_system_file_inode
->get_local_system_inode
->_ocfs2_get_system_file_inode
                                    because of *arr == NULL,
                                    ocfs2_get_system_file_inode
                                    ->get_local_system_inode
                                    ->_ocfs2_get_system_file_inode
gets first ref thru
_ocfs2_get_system_file_inode,
gets second ref thru igrab and
set *arr = inode
                                    at the moment, B thread also gets
                                    two refs, so lead to one more
                                    inode ref.

So add mutex lock to avoid multi thread set two inode ref once at the
same time.
Signed-off-by: Njiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_info_handle_freeinode() and ocfs2_test_inode_bit() func, after
calls ocfs2_get_system_file_inode() to get inode ref, if calls
ocfs2_info_scan_inode_alloc() or ocfs2_inode_lock() failed, we should
iput inode alloc to avoid leaking the inode.
Signed-off-by: Njiangyiwen <jiangyiwen@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Orabug: 17330860

When accepting an incomming connection o2net_accept_one clones a child
data socket from the parent listening socket.  It then proceeds to setup
the child with callback o2net_data_ready() and sk_user_data to NULL.  If
data arrives in this window, o2net_listen_data_ready will be called with
some non-deterministic value in sk_user_data (not inherited).  We panic
when we page fault on sk_user_data -- in parent it is
sock_def_readable().

The fix is to recognize that this is a data socket being set up by
looking at the socket state and do nothing.
Signed-off-by: NTariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After updating alloc_dinode counts in ocfs2_alloc_dinode_update_counts(),
if ocfs2_alloc_dinode_update_bitmap() failed, there is a rare case that
some space may be lost.

So, roll back alloc_dinode counts when ocfs2_block_group_set_bits()
failed.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NYounger Liu <younger.liucn@gmail.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ocfs2_do_flock() calls ocfs2_file_lock() to get the cross-node clock and
then call flock_lock_file_wait() to compete with local processes.  In
case flock_lock_file_wait() failed, say -ENOMEM, clean up work is not
done.  This patch adds the cleanup --drop the cross-node lock which was
just granted.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ensure that ocfs2_update_inode_fsync_trans() is called any time we touch
an inode in a given transaction.  This is a follow-on to the previous
patch to reduce lock contention and deadlocking during an fsync
operation.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Wengang <wen.gang.wang@oracle.com>
Cc: Greg Marsden <greg.marsden@oracle.com>
Cc: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 9548906b ('xattr: Constify ->name member of "struct xattr"')
missed that ocfs2 is calling kfree(xattr->name).  As a result, kernel
panic occurs upon calling kfree(xattr->name) because xattr->name refers
static constant names.  This patch removes kfree(xattr->name) from
ocfs2_mknod() and ocfs2_symlink().
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: NTariq Saeed <tariq.x.saeed@oracle.com>
Tested-by: NTariq Saeed <tariq.x.saeed@oracle.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do not put bh when buffer_uptodate failed in ocfs2_write_block and
ocfs2_write_super_or_backup, because it will put bh in b_end_io.
Otherwise it will hit a warning "VFS: brelse: Trying to free free
buffer".
Signed-off-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: NJoel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When ocfs2_create_new_inode_locks() return error, inode open lock may
not be obtainted for this inode.  So other nodes can remove this file
and free dinode when inode still remain in memory on this node, which is
not correct and may trigger BUG.  So __ocfs2_mknod_locked should return
error when ocfs2_create_new_inode_locks() failed.

              Node_1                              Node_2
create fileA, call ocfs2_mknod()
  -> ocfs2_get_init_inode(), allocate inodeA
  -> ocfs2_claim_new_inode(), claim dinode(dinodeA)
  -> call ocfs2_create_new_inode_locks(),
     create open lock failed, return error
  -> __ocfs2_mknod_locked return success

                                                unlink fileA
                                                try open lock succeed,
                                                and free dinodeA

create another file, call ocfs2_mknod()
  -> ocfs2_get_init_inode(), allocate inodeB
  -> ocfs2_claim_new_inode(), as Node_2 had freed dinodeA,
     so claim dinodeA and update generation for dinodeA

call __ocfs2_drop_dl_inodes()->ocfs2_delete_inode()
to free inodeA, and finally triggers BUG
on(inode->i_generation != le32_to_cpu(fe->i_generation))
in function ocfs2_inode_lock_update().
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Orabug: 18108070

ocfs2_xattr_extend_allocation() hits panic when creating xattr during
data extent alloc phase.  The problem occurs if due to local alloc
fragmentation, clusters are spread over multiple extents.  In this case
ocfs2_add_clusters_in_btree() finds no space to store more than one
extent record and therefore fails returning RESTART_META.  The situation
is anticipated for xattr update case but not xattr create case.  This
fix simply ports that code to create case.
Signed-off-by: NTariq Saeed <tariq.x.saeed@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In dlm_query_region_handler(), once kmalloc failed, it will unlock
dlm_domain_lock without lock first, then deadlock happens.
Signed-off-by: NZhonghua Guo <guozhonghua@h3c.com>
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Tested-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

llseek requires ocfs2 inode lock for updating the file size in SEEK_END.
because the file size maybe update on another node.

This bug can be reproduce the following scenario: at first, we dd a test
fileA, the file size is 10k.

on NodeA:
---------
 1) open the test fileA, lseek the end of file. and print the position.
 2) close the test fileA

on NodeB:
 1) open the test fileA, append the 5k data to test FileA.
 2) lseek the end of file. and print the position.
 3) close file.

At first we run the test program1 on NodeA , the result is 10k.  And
then run the test program2 on NodeB, the result is 15k.  At last, we run
the test program1 on NodeA again, the result is 10k.

After applying this patch the three step result is 15k.

test result: 1000000 times lseek call;
index        lseek with inode lock (unit:us)                lseek without inode lock (unit:us)
  1                   1168162                                    555383
  2                   1168011                                    549504
  3                   1170538                                    549396
  4                   1170375                                    551685
  5                   1170444                                    556719
  6                   1174364                                    555307
  7                   1163294                                    551552
  8                   1170080                                    549350
  9                   1162464                                    553700
 10                   1165441                                    552594
 avg                  1168317                                    552519

avg with lock - avg without lock = 615798
(avg with lock - avg without lock)/1000000=0.615798 us
Signed-off-by: NJensen <shencanquan@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Acked-by: NJoel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In o2nm_cluster, cl_idle_timeout_ms, cl_keepalive_delay_ms, as well as
cl_reconnect_delay_ms, are defined as type of unsigned int.  So we
should also use unsigned int in the helper functions.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following patches are reverted in this patch because these patches
caused performance regression in the remote unlink() calls.

  ea455f8a - ocfs2: Push out dropping of dentry lock to ocfs2_wq
  f7b1aa69 - ocfs2: Fix deadlock on umount
  5fd13189 - ocfs2: Don't oops in ocfs2_kill_sb on a failed mount

Previous patches in this series removed the possible deadlocks from
downconvert thread so the above patches shouldn't be needed anymore.

The regression is caused because these patches delay the iput() in case
of dentry unlocks.  This also delays the unlocking of the open lockres.
The open lockresource is required to test if the inode can be wiped from
disk or not.  When the deleting node does not get the open lock, it
marks it as orphan (even though it is not in use by another
node/process) and causes a journal checkpoint.  This delays operations
following the inode eviction.  This also moves the inode to the orphaned
inode which further causes more I/O and a lot of unneccessary orphans.

The following script can be used to generate the load causing issues:

  declare -a create
  declare -a remove
  declare -a iterations=(1 2 4 8 16 32 64 128 256 512 1024 2048 4096 8192 16384)
  unique="`mktemp -u XXXXX`"
  script="/tmp/idontknow-${unique}.sh"
  cat <<EOF > "${script}"
  for n in {1..8}; do mkdir -p test/dir\${n}
    eval touch test/dir\${n}/foo{1.."\$1"}
  done
  EOF
  chmod 700 "${script}"

  function fcreate ()
  {
    exec 2>&1 /usr/bin/time --format=%E "${script}" "$1"
  }

  function fremove ()
  {
    exec 2>&1 /usr/bin/time --format=%E ssh node2 "cd `pwd`; rm -Rf test*"
  }

  function fcp ()
  {
    exec 2>&1 /usr/bin/time --format=%E ssh node3 "cd `pwd`; cp -R test test.new"
  }

  echo -------------------------------------------------
  echo "| # files | create #s | copy #s | remove #s |"
  echo -------------------------------------------------
  for ((x=0; x < ${#iterations[*]} ; x++)) do
    create[$x]="`fcreate ${iterations[$x]}`"
    copy[$x]="`fcp ${iterations[$x]}`"
    remove[$x]="`fremove`"
    printf "| %8d | %9s | %9s | %9s |\n" ${iterations[$x]} ${create[$x]} ${copy[$x]} ${remove[$x]}
  done
  rm "${script}"
  echo "------------------------"
Signed-off-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we are dropping last inode reference from downconvert thread, we will
end up calling ocfs2_mark_lockres_freeing() which can block if the lock
we are freeing is queued thus creating an A-A deadlock.  Luckily, since
we are the downconvert thread, we can immediately dequeue the lock and
thus avoid waiting in this case.
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We cannot drop last dquot reference from downconvert thread as that
creates the following deadlock:

NODE 1                                  NODE2
holds dentry lock for 'foo'
holds inode lock for GLOBAL_BITMAP_SYSTEM_INODE
                                        dquot_initialize(bar)
                                          ocfs2_dquot_acquire()
                                            ocfs2_inode_lock(USER_QUOTA_SYSTEM_INODE)
                                            ...
downconvert thread (triggered from another
node or a different process from NODE2)
  ocfs2_dentry_post_unlock()
    ...
    iput(foo)
      ocfs2_evict_inode(foo)
        ocfs2_clear_inode(foo)
          dquot_drop(inode)
            ...
	    ocfs2_dquot_release()
              ocfs2_inode_lock(USER_QUOTA_SYSTEM_INODE)
               - blocks
                                            finds we need more space in
                                            quota file
                                            ...
                                            ocfs2_extend_no_holes()
                                              ocfs2_inode_lock(GLOBAL_BITMAP_SYSTEM_INODE)
                                                - deadlocks waiting for
                                                  downconvert thread

We solve the problem by postponing dropping of the last dquot reference to
a workqueue if it happens from the downconvert thread.
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide dqgrab() function to get quota structure reference when we are
sure it already has at least one active reference.  Make use of this
function inside quota code.
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move dquot_initalize() call in ocfs2_delete_inode() after the moment we
verify inode is actually a sane one to delete.  We certainly don't want
to initialize quota for system inodes etc.  This also avoids calling
into quota code from downconvert thread.

Add more details into the comment why bailing out from
ocfs2_delete_inode() when we are in downconvert thread is OK.
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The flag was never set, delete it.
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a part of the nocontrold feature which was incorporated sometime
back.

This is required for backward compatibility of the tools, specifically
the scenario where the tools with recovery callback is used with a
kernel not using the recovery callbacks (older kernel + newer tools).
The tools look for this file to understand if the kernel supports DLM
recovery callbacks.

For kernels which support recovery callbacks but will miss this patch,
ocfs2 will continue to use the older API and would still be able to
mount the filesystem.

[akpm@linux-foundation.org: simplify]
[sfr@canb.auug.org.au: VERIFY_OCTAL_PERMISSIONS fix up]
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a race window in dlm_do_recovery() between dlm_remaster_locks()
and dlm_reset_recovery() when the recovery master nearly finish the
recovery process for a dead node.  After the master sends FINALIZE_RECO
message in dlm_remaster_locks(), another node may become the recovery
master for another dead node, and then send the BEGIN_RECO message to
all the nodes included the old master, in the handler of this message
dlm_begin_reco_handler() of old master, dlm->reco.dead_node and
dlm->reco.new_master will be set to the second dead node and the new
master, then in dlm_reset_recovery(), these two variables will be reset
to default value.  This will cause new recovery master can not finish
the recovery process and hung, at last the whole cluster will hung for
recovery.

old recovery master:                                 new recovery master:
dlm_remaster_locks()
                                                  become recovery master for
                                                  another dead node.
                                                  dlm_send_begin_reco_message()
dlm_begin_reco_handler()
{
 if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
  return -EAGAIN;
 }
 dlm_set_reco_master(dlm, br->node_idx);
 dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
 dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
 dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}
                                                  will hang in dlm_remaster_locks() for
                                                  request dlm locks info

Before send FINALIZE_RECO message, recovery master should set
DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done,
this can break the race windows as the BEGIN_RECO messages will not be
handled before DLM_RECO_STATE_FINALIZE flag is cleared.

A similar race may happen between new recovery master and normal node
which is in dlm_finalize_reco_handler(), also fix it.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: NWengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This issue was introduced by commit 800deef3 ("ocfs2: use
list_for_each_entry where benefical") in 2007 where it replaced
list_for_each with list_for_each_entry.  The variable "lock" will point
to invalid data if "tmpq" list is empty and a panic will be triggered
due to this.  Sunil advised reverting it back, but the old version was
also not right.  At the end of the outer for loop, that
list_for_each_entry will also set "lock" to an invalid data, then in the
next loop, if the "tmpq" list is empty, "lock" will be an stale invalid
data and cause the panic.  So reverting the list_for_each back and reset
"lock" to NULL to fix this issue.

Another concern is that this seemes can not happen because the "tmpq"
list should not be empty.  Let me describe how.

old lock resource owner(node 1):                                  migratation target(node 2):
image there's lockres with a EX lock from node 2 in
granted list, a NR lock from node x with convert_type
EX in converting list.
dlm_empty_lockres() {
 dlm_pick_migration_target() {
   pick node 2 as target as its lock is the first one
   in granted list.
 }
 dlm_migrate_lockres() {
   dlm_mark_lockres_migrating() {
     res->state |= DLM_LOCK_RES_BLOCK_DIRTY;
     wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res));
	 //after the above code, we can not dirty lockres any more,
     // so dlm_thread shuffle list will not run
                                                                   downconvert lock from EX to NR
                                                                   upconvert lock from NR to EX
<<< migration may schedule out here, then
<<< node 2 send down convert request to convert type from EX to
<<< NR, then send up convert request to convert type from NR to
<<< EX, at this time, lockres granted list is empty, and two locks
<<< in the converting list, node x up convert lock followed by
<<< node 2 up convert lock.

	 // will set lockres RES_MIGRATING flag, the following
	 // lock/unlock can not run
     dlm_lockres_release_ast(dlm, res);
   }

   dlm_send_one_lockres()
                                                                 dlm_process_recovery_data()
                                                                   for (i=0; i<mres->num_locks; i++)
                                                                     if (ml->node == dlm->node_num)
                                                                       for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) {
                                                                        list_for_each_entry(lock, tmpq, list)
                                                                        if (lock) break; <<< lock is invalid as grant list is empty.
                                                                       }
                                                                       if (lock->ml.node != ml->node)
                                                                         BUG() >>> crash here
 }

I see the above locks status from a vmcore of our internal bug.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NWengang Wang <wen.gang.wang@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, ocfs2_sync_file grabs i_mutex and forces the current journal
transaction to complete.  This isn't terribly efficient, since sync_file
really only needs to wait for the last transaction involving that inode
to complete, and this doesn't require i_mutex.

Therefore, implement the necessary bits to track the newest tid
associated with an inode, and teach sync_file to wait for that instead
of waiting for everything in the journal to commit.  Furthermore, only
issue the flush request to the drive if jbd2 hasn't already done so.

This also eliminates the deadlock between ocfs2_file_aio_write() and
ocfs2_sync_file().  aio_write takes i_mutex then calls
ocfs2_aiodio_wait() to wait for unaligned dio writes to finish.
However, if that dio completion involves calling fsync, then we can get
into trouble when some ocfs2_sync_file tries to take i_mutex.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Variable uuid_net_key in ocfs2_initialize_super() is not used.  Clean it
up.
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Acked-by: NMark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a problem that waitqueue_active() may check stale data thus miss
a wakeup of threads waiting on ip_unaligned_aio.

The valid value of ip_unaligned_aio is only 0 and 1 so we can change it to
be of type mutex thus the above prolem is avoid.  Another benifit is that
mutex which works as FIFO is fairer than wake_up_all().
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When mounting an ocfs2 volume, it will firstly generate a file
/sys/kernel/debug/o2dlm/<uuid>/dlm_state, and then launch the dlm thread.
So the following situation will cause a null pointer dereference.
dlm_debug_init -> access file dlm_state which will call dlm_state_print ->
dlm_launch_thread

Move dlm_debug_init after dlm_launch_thread and dlm_launch_recovery_thread
can fix this issue.
Signed-off-by: NZongxun Wang <wangzongxun@huawei.com>
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch the RSPI MSTP clock on SH7757 from a con ID match to a dev ID
match, so we can start looking it up using clk_get() with a NULL ID.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sh7757lcr SDHI register size is 0x100
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The compiler is permitted to generate code which overwrites the
parameters to a function.  If those parameters include the only saved
copy we have of userspace's registers, we're in trouble.
Signed-off-by: NBobby Bingham <koorogi@koorogi.info>
Cc: Paul Mundt <paul.mundt@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This does not appear to have been used since commit 74d99a5e ("sh:
SH-2A FPU support") in 2007.
Signed-off-by: NBobby Bingham <koorogi@koorogi.info>
Cc: Paul Mundt <paul.mundt@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When invoking syscall handlers on sh32, the saved userspace registers
are at the top of the stack.  This seems to have been intentional, as it
is an easy way to pass r0, r1, ...  to the handler as parameters 5, 6,
...

It causes problems, however, because the compiler is allowed to generate
code for a function which clobbers that function's own parameters.  For
example, gcc generates the following code for clone:

    <SyS_clone>:
        mov.l   8c020714 <SyS_clone+0xc>,r1  ! 8c020540 <do_fork>
        mov.l   r7,@r15
        mov     r6,r7
        jmp     @r1
        mov     #0,r6
        nop
        .word 0x0540
        .word 0x8c02

The `mov.l r7,@r15` clobbers the saved value of r0 passed from
userspace.  For most system calls, this might not be a problem, because
we'll be overwriting r0 with the return value anyway.  But in the case
of clone, copy_thread will need the original value of r0 if the
CLONE_SETTLS flag was specified.

The first patch in this series fixes this issue for system calls by
pushing to the stack and extra copy of r0-r2 before invoking the
handler.  We discard this copy before restoring the userspace registers,
so it is not a problem if they are clobbered.

Exception handlers also receive the userspace register values in a
similar manner, and may hit the same problem.  The second patch removes
the do_fpu_error handler, which looks susceptible to this problem and
which, as far as I can tell, has not been used in some time.  The third
patch addresses other exception handlers.

This patch (of 3):

The userspace registers are stored at the top of the stack when the
syscall handler is invoked, which allows r0-r2 to act as parameters 5-7.
Parameters passed on the stack may be clobbered by the syscall handler.
The solution is to push an extra copy of the registers which might be
used as syscall parameters to the stack, so that the authoritative set
of saved register values does not get clobbered.

A few system call handlers are also updated to get the userspace
registers using current_pt_regs() instead of from the stack.
Signed-off-by: NBobby Bingham <koorogi@koorogi.info>
Cc: Paul Mundt <paul.mundt@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes the CPU_SCORE7 Kconfig parameter, which is no longer used
anywhere in the source code and Makefiles.
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recent increased use of typeof() throughout the tree resulted in a
number of symbols (25 in a typical distro config of ours) not getting a
proper CRC calculated for them anymore, due to the parser in genksyms
not coping with several of these uses (interestingly in the majority of
[if not all] cases the problem is due to the use of typeof() in code
preceding a certain export, not in the declaration/definition of the
exported function/object itself; I wasn't able to find a way to address
this more general parser shortcoming).

The use of parameter_declaration is a little more relaxed than would be
ideal (permitting not just a bare type specification, but also one with
identifier), but since the same code is being passed through an actual
compiler, there's no apparent risk of allowing through any broken code.

Otoh using parameter_declaration instead of the ad hoc
"decl_specifier_seq '*'" / "decl_specifier_seq" pair allows all types to
be handled rather than just plain ones and pointers to plain ones.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move code moving event structure to access_list from copy_event_to_user()
to fanotify_read() where it is more logical (so that we can immediately
see in the main loop that we either move the event to a different list
or free it).  Also move special error handling for permission events
from copy_event_to_user() to the main loop to have it in one place with
error handling for normal events.  This makes copy_event_to_user()
really only copy the event to user without any side effects.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Swap the error / "read ok" branches in the main loop of fanotify_read().
We will grow the "read ok" part in the next patch and this makes the
indentation easier.  Also it is more common to have error conditions
inside an 'if' instead of the fast path.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

access_mutex is used only to guard operations on access_list.  There's
no need for sleeping within this lock so just make a spinlock out of it.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>