- 18 5月, 2017 14 次提交
-
-
由 Ido Schimmel 提交于
In virtual mode, packets are classified to FIDs based on their ingress port and VLAN whereas in non-virtual mode only the VLAN is taken into account. Currently ports are initialized to use virtual mode due to the presence of the PVID vPort. However, we're going to transition ports between both modes based on the FIDs they use and not merely based on the presence on a VLAN upper. Therefore, during initialization, no mode will be explicitly set. Since the Programmer's Reference Manual (PRM) doesn't specify a default, explicitly set the port to non-virtual mode and later transition the port between both modes based on the FIDs it uses. In a follow-up patchset, this step will be moved to the common FID core where it logically belongs. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
PVID is a port attribute and should therefore reside in the main driver file and not the switchdev specific one. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
We no longer batch VLAN operations, so there's no need to set the learning state for a range of VLANs. Use a common function to set the learning state for a Port-VLAN, thereby making the code saner more receptive for upcoming changes. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Simplify the code by using the common function that sets an STP state for a Port-VLAN and remove the existing one that tries to batch it for several VLANs. This will help us in a follow-up patchset to introduce a unified infrastructure for bridge ports, regardless if the bridge is VLAN-aware or not. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
switchdev's VLAN object has the ability to describe a range of VLAN IDs, but this is only used when VLAN operations are done using the SELF flag, which is something we would like to remove as it allows one to bypass the bridge driver. Do VLAN operations on a per-VLAN basis, thereby simplifying the code and preparing it for refactoring in a follow-up patchset. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Since commit 97c24290 ("switchdev: Execute bridge ndos only for bridge ports") switchdev code checks that port is bridged, so no need to perform the same check in the driver. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
The router interfaces (RIFs) array is currently initialized together with the general router configuration. However, in a follow-up patchset we're going to introduce a common RIF core that will require us to initialize more RIF constructs, so move the RIF initialization to its own function. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
The FIB notification block logically belongs inside the router specific struct, so move it there. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
The router interfaces (RIFs) array is of no interest to code outside the routing realm, so declare it inside the router specific struct instead of the chip-wide one. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Some attributes in the global chip struct are only relevant for bridge operation, so encapsulate them in their own struct that isn't exposed to non-bridge code. This will also help us later, when we add more bridge-specific attributes. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
In a similar fashion to previous patch, the router structure ('mlxsw_sp_router') doesn't need to be accessible to anyone, but the router code located at spectrum_router.c Make this apparent and reduce its scope by defining it there. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
The shared buffer structure ('mlxsw_sp_sb') doesn't need to be accessible to anyone, but the shared buffer code located at spectrum_buffers.c Make this apparent and reduce its scope by defining it there. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ganesh Goudar 提交于
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ganesh Goudar 提交于
When is_kdump_kernel() is true, reduce memory footprint of cxgb4 by using a single "Queue Set". Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2017 11 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Leon Romanovsky 提交于
There is inline function to test if carrier present, so it makes open-coded solution redundant. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Acked-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Given that our rings are always a power of 2, we can simplify the calculation of number of completed TX descriptors by using masking instead of if statement based on whether the index have wrapped or not. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
We have a number of places where we calculate the descriptor index based on a value which may have overflown. Create a macro for masking with the ring size. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Since XDP TX ring holds "spare" RX buffers anyway, we don't have to rush the completion. We can wait until ring fills up completely before trying to reclaim buffers. If RX poll has ended an no buffer has been queued for XDP TX we have no guarantee we will see another interrupt, so run the reclaim there as well, to make sure TX statistics won't become stale. This should help us reclaim more buffers per single queue controller register read. Note that the XDP completion is very trivial, it only adds up the sizes of transmitted frames for statistics so the latency spike should be acceptable. In case user sets the ring sizes to something crazy, limit the completion to 2k entries. The check if the ring is empty at the beginning of xdp_complete() is no longer needed - the callers will perform it. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Introduce NFP_NET_CFG_CTRL_CSUM_COMPLETE capability and implement parsing of CHECKSUM_COMPLETE metadata. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NEdwin Peer <edwin.peer@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edwin Peer 提交于
ABI version 4 introduced metadata chaining. Using the ABI version to signal metadata chaining precludes firmware that advertises new capabilities which rely on prepended metadata from working on older kernels. Capability bits are thus better suited to signalling the chained metadata format. A new version of the RSS capability is introduced to distinguish between the differing metadata formats for ABI versions other than 4. Signed-off-by: NEdwin Peer <edwin.peer@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Even if capability for RSS and IRQ moderation are present we may have not initialized them for control vNIC. Depend on selected features mask (ctrl) rather than capabilities (cap) to determine which features should be enabled. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edwin Peer 提交于
Firmware advertising the LSO2 capability exploits driver provided L3 and L4 offsets in order to avoid parsing packet headers in the TX path. The vlan field in struct nfp_net_tx_desc is repurposed, making TXVLAN a mutually exclusive configuration to LSO2. Signed-off-by: NEdwin Peer <edwin.peer@netronome.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edwin Peer 提交于
The l4_offset field referred to by NFD is confusingly named. It is not the offset of the L4 transport header, but rather the L4 payload. The LSO2 capability supported by alternative device firmware requires the actual L4 offset, thus the rename seems prudent. Signed-off-by: NEdwin Peer <edwin.peer@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
We advertise TSO to the stack but leave it disabled by default. Make sure it's not only disabled in the netdev features but also on the device itself. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2017 15 次提交
-
-
由 Shannon Nelson 提交于
On the SPARC platform we need to use the DMA_ATTR_WEAK_ORDERING attribute in our Rx path dma mapping in order to get the expected performance out of the receive path. Adding it to the Tx path has little effect, so that's not a part of this patch. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Reviewed-by: NTushar Dave <tushar.n.dave@oracle.com> Reviewed-by: NTom Saeger <tom.saeger@oracle.com> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
Prefetch buffer cleanup code was called twice, causing EDAC to report errors during reboot. [ 1130.972475] xgene-edac 78800000.edac: IOB bridge agent (BA) transaction error [ 1130.979584] xgene-edac 78800000.edac: IOB BA write response error [ 1130.985648] xgene-edac 78800000.edac: IOB BA write access at 0x00.00000000 () [ 1130.993612] xgene-edac 78800000.edac: IOB BA requestor ID 0x00002400 [ 1131.000242] xgene-edac 78800000.edac: IOB bridge agent (BA) transaction error ... This patch fixes the errors by, - removing the redundant prefetch buffer cleanup from port_ops->shutdown() - moving port_ops->shutdown() after delete_rings() Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch adds workaround for HW errata 10GE_10 and ENET_15: "HW statistic counters value are duplicated". - RFCS duplicates RALN counter - RFLR duplicates RUND counter - TFCS duplicates TFRG counter - RALN should be intepreted as 0 in 10G mode Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch adds statistic counter for frames recovered from HW errata 10GE_8 and ENET_11: "HW reports Length error for valid 64 byte frames with len <46 bytes". Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch adds workaround for HW errata 10GE_4: "XGENET_ICM_ECM_DROP_COUNT_REG_0 reg not clear on read". Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch adds rx_overrun and tx_underrun ethtool statistic counters. Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch adds extended ethtool statistics support. Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch cleans up unused macros to improve readability. Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch fixes the tx error counters and adds more rx error counters. Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
Commit 5944701d ("net: remove useless memset's in drivers get_stats64") makes the pdata->stats redundant. This patch removes pdata->stats and updates get_stats64() callback accordingly. Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch switches to use rgmii mdio mac access routines if available, as they share the same HW. Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch, - refactors mac read/write functions - adds lock to protect indirect mac access Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Stop the clean timer earlier to be sure there's no asynchronous interference while stopping the port. Orabug: 25748241 Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Tai 提交于
When running LDom binding/unbinding test, kernel may panic in ldmvsw_open(). It is more likely that because we're removing the ldc connection before unregistering the netdev in vsw_port_remove(), we set up a window of time where one process could be removing the device while another trying to UP the device. This also sometimes causes vio handshake error due to opening a device without closing it completely. We should unregister the netdev before we disable the "hardware". Orabug: 25980913, 25925306 Signed-off-by: NThomas Tai <thomas.tai@oracle.com> Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Miroslav Lichvar 提交于
The driver doesn't support timestamping of all received packets and should return error when trying to enable the HWTSTAMP_FILTER_ALL filter. Cc: WingMan Kwok <w-kwok2@ti.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NMiroslav Lichvar <mlichvar@redhat.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-